QEMU provides multiboot information by default so we can
use the provided memory map to mark reserved physical
memory. Note that 64-bit requires Multiboot2 which
currently both Zephyr and QEMU do not support, hence
it's not enabled for qemu_x86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The default KERNEL_VM_SIZE if ACPI=y is too large for QEMU targets
which results in page tables being too big to fit in available
memory. So limit the VM size to a more reasonable one.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Switch to use DEVICE_DT_GET instead of device_get_binding for pinmux
device. As part of this change drop the "label" property from
the pinmux devicetree node and update the binding and dts files to
reflect that.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Provide the arduino_i2c node name from i2c_0.
Provide pinmux for frdm_stbc_agm01.
The frdm_stbc_agm01 supplies access to an FXOS8700 and FXAS21002.
when using frdm_stbc_agm01 with frdm_k22f, the FXAS21002 sample
sensor project can be utilized and the FXOS8700 sample sensor
project utilizes the shield's FXOS8700.
Signed-off-by: Ryan Holleran <rhollerar@gmail.com>
Switch to use DEVICE_DT_GET instead of device_get_binding for pinmux
device. As part of this change drop the "label" property from
the pinmux devicetree node and update the binding and dts files to
reflect that.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Even though possible to use external pull-up and open drain buffer,
prefer internal pull-up to reduce power consumption.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
This commit moves TFM CMakeLists.txt into Zephyr and relocates the
Kconfig.tfm file under the modules/tfm folder.
Updates the manifest to point to related TFM changes.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Remove support for the Musca-A board. This board is rarely used, few
are available and superceded by Musca-B and Musca-S.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a simple pinctrl node for the IOF registers under the GPIO
controller node to be used by the pinmux driver.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Switch to use DEVICE_DT_GET instead of device_get_binding for pinmux
device. As part of this change drop the "label" property from
the pinmux devicetree node and update the binding and dts files to
reflect that.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Switch to use DEVICE_DT_GET instead of device_get_binding for pinmux
device. As part of this change drop the "label" property from
the pinmux devicetree node and update the binding and dts files to
reflect that.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Switch to use DEVICE_DT_GET instead of device_get_binding for pinmux
device. As part of this change drop the "label" property from
the pinmux devicetree node and update the binding and dts files to
reflect that.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
With addition of icount support ARC QEMU is now stable,
so we can finally enable it as default test platform.
This reverts commit 7d10b68baa.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
This CL moves def_lvol_io_list device-tree node from npcx7m6fb_evb.dts
to npcx7m6fb.dtsi. The benefit of it is that we needn't add
def_lvol_io_list node for each board dts file if there are no 1.8V
io-pads on the platform. If so, add them in the specific board dts file
directly.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
- Updated arduino dtsi to map spi1 as arduino spi
- Made board's zephyr peripheral mapping more compact and added arduino
and st-link labels.
Signed-off-by: Nikos Oikonomou <nikoikonomou92@gmail.com>
Set the Zephyr Vendor Specific HCI extensions as default y on nRF boards
that only support host only builds.
Correct this for nrf5340dk which had set the Kconfig for the feature
support instead of the feature itself.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
nRF5340 PDK board was deprecated in v2.5.0 release
and is removed now from the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Switch to use DEVICE_DT_GET instead of device_get_binding for pinmux
device. As part of this change drop the "label" property from
the pinmux devicetree node and update the binding and dts files to
reflect that.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Stm32f7 disco boards benefit from dedicated openocd board target.
Use these target as the generic stm32f7discovery one will be
eventually removed.
Additionally, replace now deprecated 'adapter_khz' by 'adapter speed'.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Zephyr testcases(not SOF case) not use kernel DSP driver to load image
on ADSP board, thus do not need signing with xman. So add a input
'--no-manifest' to specify signing without xman in image. If use DSP
driver load image, we should not specify this.
Signed-off-by: Jian Kang <jianx.kang@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When load firmware by script, the buffer size and data size are not
same, so specify size when copy data to buffer.
Signed-off-by: Jian Kang <jianx.kang@intel.com>
All of these boards can be debugged with west debug via settings in
board.cmake, but the docs say they can't be. This is being copy/pasted
around; fix it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The default frequency for this board in Renode is 66 MHz. This needs to
be even with `SYS_CLOCK_HW_CYCLES_PER_SEC` to avoid such problems as in
the #31726 issue.
Unfortunately, the difference in these values was helpful for some tests
that are failing with 66 MHz set in both places. It created artificial
boost in certain circumstances.
The frequencies in the default Renode platform description (`.repl`)
file for MI-V were overridden with 4 MHz value that seems to be better
tolerated based on testing. The `SYS_CLOCK_HW_CYCLES_PER_SEC` was
adjusted as well.
To solve the rest of the issues, `cpu PerformanceInMips` was set to 4.
It seems tests are completed faster with such a value.
This commit fixes#31726.
Signed-off-by: Adam Jeliński <ajelinski@antmicro.com>
Increase the size of ram/flash given in nrf5340dk_nrf5340_cpuapp.yaml
so they match the actual numbers which are available for default
tests and samples.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
A number of SoCs have overlapping devices at the same unit address.
Surpress the warning for those cases:
* NRF - kmu@39000 & flash-controller@39000
* NRF - clock@5000 & power@5000
* NRF - image@20000000 & image_s@20000000
* NRF - i2c@40003000 & spi@40003000
* STM - i2s@40003800 & spi@40003800
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A number of SoCs have overlapping devices at the same unit address.
Surpress the warning for those cases:
* Atmel - pinmux@41004400 & gpio@41004400
* Atmel - pinmux@41004480 & gpio@41004480
* Atmel - pinmux@41008000 & gpio@41008000
* NXP - flash@0 & gpio@0
* NXP - syscon@0 & gpio@0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
On Atmel & Silabs SoCs the SPI controller is implemented on a shared
peripheral block (sercom for atmel, usart on silabs) so we can't have
the node name be "spi@...". In these cases we disable the warning
via passing '-Wno-spi_bus_bridge' to dtc.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The compatible for the ARMv8 timer should have been arm,armv8-timer and
not arm,arm-timer. The dts binding file name was correct, just the
compatible was wrong. Rename dts, binding, and associated code to use
arm,armv8-timer.
Fixes#31946
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Aligning the boostxl_ulpsense shield with all other shield
descriptions by ensuring it has a Kconfig.shield file.
This also provides the Kconfig symbol SHIELD_BOOSTXL_ULPSENSE similar
to the Kconfig symbol available for other shields.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The devicetree only provides PWM-compatible LEDs. Remove the aliases
that suggest it supports GPIO-compatible LEDs.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
To give consistency with nrf91. Also, BL2 builds are now faster since
tfm-mcuboot is fetched via west.
This reverts commit 88a865c28d.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Rather than Kconfig vendor symbols, select stm32 watchdog using
compatible.
So user only has to enable the requested node and set
CONFIG_WATCHDOG=y.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
APL ADSP doesn't boot with reset-vector.S in the bootloader,
move it over to the main application binary.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Change the command that signing with rimage by flash script after
commitID:b553166a has been merged, that patch add a new option -D for
specify configuration, so update the command of this script.
Signed-off-by: Jian Kang <jianx.kang@intel.com>
These were removed in commit 6b58e2c0a3
but mistakenly reintroduced in
commit 51c34bb609
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add a new Kconfig CONFIG_BUILD_OUTPUT_EFI and select that for boards
that want to generate an EFI application.
Make qemu_x86_64 also generate an EFI file, however do not enable this
by default yet.
Goal is to boot qemu using EFI to be able to test this path in the
future.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We've already enabled full RAM mapping if ACPI is enabled, also
set a large 3GB address space size, these systems are not RAM-
constrained (they are PC platforms) and they have large MMIO
config spaces for PCIe.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Customers have asked for further details on the sensors available for
the product in the readme file.
Also corrects an issue where the product LEDs were mapped
backwards in the DTS file.
Signed-off-by: Greg Leach <greg.leach@lairdconnect.com>
Clean up logging menuconfig by grouping configuration into
sections like: mode, processing configuration, backends.
Additionlly, removed LOG_ENABLE_FANCY_OUTPUT_FORMATTING which is no
longer in use.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
With SDK 0.12.2 we have support to generation EFI binaries in binutils
which is needed by the zefi.py script. Now that is there we can utilize
the SDK objcopy instead of assuming the host objcopy can do this (which
would only be the case on x86 linux host systems).
Fixes#27047
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds minimal support for running zephyr as Xen guest. It
does not use xen PV console, which is somewhat hard to implement, as it
depends on xenbus infrastructure. Instead SBSA-compatible PL011 uart is
used.
Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
These are all PC systems which have large amounts of memory
which needs to be mapped at runtime (most are 2GB).
Increase the address space size accordingly, adding an extra
8MB for mappings.
The ACRN target has 8MB, give it 16MB of VM.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We no longer use a page pool to draw memory pages when doing
memory map operations. We now preallocate the entire virtual
address space so no allocations are ever necessary when mapping
memory.
We still need memory to clone page tables, but this is now
expressed by a new Kconfig X86_MAX_ADDITIONAL_MEM_DOMAINS
which has much clearer semantics than specifying the number
of pages in the pool.
The default address space size is now 8MB, but this can be
tuned by the application.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Just tell the kernel that RAM starts 1MB in, period.
Better simulation of a low-memory microcontroller as
we're not managing a very large number of page frames
we'll never use.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
test i2c api on microchip mec15xxevb_assy6853 board by writing
and reading data with nxp pca95xx device on board.
Signed-off-by: peng1 chen <peng1.chen@intel.com>
This allows to get much more reproducible results in terms of
amount of tests passed & failed.
But note it requires QEMU for ARC with icount support!
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
When zefi.py was changed to pass compiler and objcopy the flag to
objcopy for the EFI target was dropped. This is because the current
SDK (0.12.1) doesn't support that target type for objcopy. However,
target is necessary for the images to be created correctly and boot.
Switch back to use the host objcopy as a stop gap fix, until the SDK
can support target for EFI.
Fixes: #31517
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Enables the FlexSPI NOR flash driver, configures the FlexSPI pins, and
updates the board documentation accordingly on the mimxrt1064_evk.
Note that this SoC has two FlexSPI instances: one instance has an
in-package QSPI flash used for XIP; the other instance has a board-level
QSPI flash used for storage, not XIP. This patch enables the flash
driver on the non-XIP flash only.
Tested with:
- samples/subsys/fs/littlefs
- samples/drivers/flash_shell
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
boards: arm: Rename flexspi_qspi to flexspi_nor for mimxrt1064_evk
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Reworks the NXP FlexSPI device tree bindings to configure controller and
device properties needed for an upcoming FlexSPI flash driver.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Cleans up the HyperFlash device tree nodes on the mimxrt1050_evk and
mimxrt1060_evk_hyperflash boards to be more consistent with other
FlexSPI child nodes.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Remove conditionals (PM_DEEP_SLEEP_STATES and PM_SLEEP_STATES) from
power management code. Now these features are always available when
power management is enabled.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Migrate the whole pm subsystem to use new power states information
from power_state.h and get states and residency properties from
device tree.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
TICKLESS_CAPABLE is now selectable only and without prompt, so remove it
from _defconfig files and select it directly by the timer.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We no longer use a page pool to draw memory pages when doing
memory map operations. We now preallocate the entire virtual
address space so no allocations are ever necessary when mapping
memory.
We still need memory to clone page tables, but this is now
expressed by a new Kconfig X86_MAX_ADDITIONAL_MEM_DOMAINS
which has much clearer semantics than specifying the number
of pages in the pool.
The default address space size is now 8MB, but this can be
tuned by the application.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Just tell the kernel that RAM starts 1MB in, period.
Better simulation of a low-memory microcontroller as
we're not managing a very large number of page frames
we'll never use.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add board support files for mimxrt1024_evk, the development board for
i.MXRT1024(CM7) SoC.
- Add pinmux, dts, doc.
- Code can be loaded to SRAM.
- Tested samples: hello_world, philosophers, synchronization,
basic/blinky, and basic/button.
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
Add LED and switch DTS information. Port P0 received the NVIC line 20
on Cortex-M0+ cpu. This way, SW_0 switch can be connected as external
interrupt source for both m0 and m4 cpus.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Add LED and switch DTS information. Port P0 received the NVIC line 20
on Cortex-M0+ cpu. This way, SW_0 switch can be connected as external
interrupt source for both m0 and m4 cpus.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Add an emulation controller which routes eSPI traffic to attached
emulators depending on the selected chip(mostly host).
This allows drivers for eSPI peripherals to be tested on systems
that don't have that peripheral attached, with the emulator handling
the eSPI traffic.
Signed-off-by: Dawid Niedzwiecki <dn@semihalf.com>
Currently, zefi.py takes host GCC OBJCOPY as
default. Fixing the script to use CMAKE_C_COMPILER
and CMAKE_OBJCOPY.
Fixes: #27047
Signed-off-by: Spoorthy Priya Yerabolu <spoorthy.priya.yerabolu@intel.com>
Currently configuration for STM32F746G Discovery board on reset-start
event is inherited from included files (OpenOCD stm32f7x.cfg), but
contrary to the inherited adapter speed on reset-init event, the speed
inherited for the reset-start event is only 2000 kHz, which is not
available, so a lower speed is picked up automatically generating the
following message several times when flashing the board:
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
That commit overrides that suboptimal speed for reset-start event and
sets it to the same speed as used by reset-init event, i.e. the maximum
speed (4000 kHz), so the noisy messages like the above one disappear.
The change also improves a bit the throughput when writing to the board.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
This change enables support for KSZ8794 DSA device on the ip_k66f
board. Each LAN port is defined as a DTS subnode.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
This patch adds Kconfig entries to nRF5340-DK description that
automatically configure RPMsg Service if it is enabled for the build.
Co-authored-by: Piotr Szkotak <piotr.szkotak@nordicsemi.no>
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
When using Slim Bootloader the UART configuration isn't quite the same
as with the UEFI BIOS. In particular, UART2 is hidden in PCIe and is
instead accessible using a fixed MMIO address. Interrupts are also not
supported for this UART currently.
The simplest way to create builds against this special BIOS/bootloader
setup seems to be to create a new board variant/definition which lets
us provide a custom device tree overlay as well a dedicated Kconfig
default configuration.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt-uart, uart-pipe and bt-mon-uart DT chosen values are all
Bluetooth specific. Since Bluetooth isn't supported on the ehl_crb
board currently just remove these.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This CL provided an example of how turns on the low-voltage level
detection feature in npcx series. It demonstrates enabling low-voltage
level detection of I2C1_0 SCL/SDA io-pads if the power rail of their PUs
is 1.8V.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Part of GPIO pads in npcx series support low-voltage (1.8V) level
detection. In order to introduce this feature, this CL adds a new
NPCX-specific controller property, lvol_io_pads, in devicetree file.
For example, here is devicetree fragment which turn on low-voltage
support of i2c1_0 port.
/ {
def_lvol_io_list {
compatible = "nuvoton,npcx-lvolctrl-def";
lvol_io_pads = <&lvol_io90 /* I2C1_SCL0 1.8V support */
&lvol_io87>; /* I2C1_SDA0 1,8V support */
};
};
Then these pads will turn on 1.8V level detection during initialization.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Firmware implementing the PSCI functions described in ARM document
number ARM DEN 0022A ("Power State Coordination Interface System
Software on ARM processors") can be used by Zephyr to initiate various
CPU-centric power operations.
It is needed for virtualization, it is used to coordinate OSes and
hypervisors and it provides the functions used for SMP bring-up such as
CPU_ON and CPU_OFF.
A new PSCI driver is introduced to setup a proper subsystem used to
communicate with the PSCI firmware, implementing the basic operations:
get_version, cpu_on, cpu_off and affinity_info.
The current implementation only supports PSCI 0.2 and PSCI 1.0
The PSCI conduit (SMC or HVC) is setup reading the corresponding
property in the DTS node.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The IIS2DLPC drdy interrupt can be routed to either INT1 or
INT2 pin. Currently the selection is done by Kconfig configuration.
This commit is instead moving it into Device Tree as 'drdy-int'.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The BBC micro:bit v2 is a mini-computer that has been
designed to make the coding fun and easy to learn.
The micro:bit v2 is completely programmable so you can
easily bring your ideas to life! From making games to
creating music and even controlling robots.
The micro:bit comes with neat hardware such as a 25 LED
display, buttons, in-built speakers, Bluetooth 5 & Mesh
connectivity and sensors for temperature, motion & light.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Upgrade board specification to use the VirtIO board.
Keeps FPU run-time support disabled since the RISC-V 64-bit FPU
support in kernel appears to be non-functional.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
The CONFIG_FLOAT_HARD config previously enabled the C (compressed)
ISA extensions (CONFIG_COMPRESSED_ISA). This commit removes that
dependency.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
In npcx7 series, the Timer and Watchdog module (TWD) generates the
clocks and interrupts used for timing periodic functions in the system.
It also provides watchdog reset signal generation in response to a
failure detection.
The CL also includes:
— Add npcx watchdog device tree declarations.
— Zephyr watchdog api implementation.
— Add Watchdog definitions for npcx7 series in
tests/drivers/watchdog/wdt_basic_api/src/test_wdt.c for
supporting test suites.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
This commit is about the it8xxx2 i2c master driver which
includes six SMBus channels. The enhanced channel i2c3,
i2c4, i2c5 are controller which are designed to support
the I2C protocol.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Configure QSPI NOR support and MX25R6435F on disco_l475_iot1 board.
Set MX25R6435F as flash controller and arrange partitions to take
newlay available space into account.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Sets the device tree chosen node for instruction tightly coupled memory
(ITCM) on all i.MX RT boards. Leverages the common Cortex-M linker
section instead of the SoC-specific one.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Now that we generate a header that extern's all possible devicetree
based device struct we can remove DEVICE_DT_DECLARE and
DEVICE_DT_INST_DECLARE as they aren't needed anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Previous Zephyr environment required the usage
of external ESP-IDF cloning as source of headers
and libraries. The latest implementation uses external
module as source.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Disable RTC WDT enabled (by default) by 2nd stage bootloader in ESP-IDF.
This WDT timer ensures correct hand-over and startup sequence from
bootloader to application.
Enabling bootloader caused system clock initialization to fail
when clock rate is greater then 80MHz. This also fixes
esp32 clock source code.
Signed-off-by: Mahavir Jain <mahavir@espressif.com>
Replace these with links to the actual documentation as needed, or
just remove them entirely. These are getting copy/pasted around and
I'm trying to avoid that happening in the future.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
* add toolchain abstraction for coverage
* add select HAS_COVERAGE_SUPPORT to kconfig
* port gcov linker code to CKake for arc
* give user permission to gcov bss section
* expand the size of iccm and dccm to 1M
Signed-off-by: Jingru Wang <jingru@synopsys.com>
Only enable hardware stack protection by default on the NXP TWR-K18F
development board if userspace is not enabled.
The NXP KE1xF SoC has 8 MPU regions, which is insufficient for using HW
stack protection and userspace simultaneously.
Fixes bc9a498bdf.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Adding acrn configurations specific to the platform
on which acrn boots zephyr, Only the EHL specifc
configurations for now. Keeping the HW clock frequency to
1900Mhz for EHL and using the new APIc timer driver.
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
Document on how memory is mapped in different configurations starting
from the MCUboot partitioning of the flash. The given examples are for
TFM use cases and dual-core samples.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Updates lpcxpresso55s69 board's documentation with mailbox and multicore
setups. Explain how _cpu1 and _ns targets are used.
Also fixes TFM related documentation.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Merges cpu0 and cpu1 targets to a single image, named multicore.bin,
this image can be found in the build folder.
Documentation is to be updated in a later commit.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
PWM, as other peripherals should not be enabled as part of
default board configuration.
Fix this.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This commit adds the board definition files
needed to support the Arduino Nano BLE 33.
Tested: the following have been verified with
my logic analyzer.
* Serial peripherals (UART, I2C, SPI)
* USB
* RTC
Untested:
* PWM. In theory it should work but I don't
have a good enough logic analyzer to test this
* RTC's. The board doesn't have a backup battery.
The peripherals are enabled for modding another
battery in the device tree.
Signed-off-by: Jefferson Lee <jeffersonlee2000@gmail.com>
This commit adds supports for the nRF52840 based BLE Cell board from
Contextual Electronics. This board contains support for BG95 Modem,
BQ52895 charger, SD card etc and can be used as a PI Hat.
In this commit, this board supports UART, I2C, SPI, Modem. Support
for charger, SD card and other things will be added later.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
This patch includes the rtc in the doc for the
nucleo_g474re and nucleo_g431rb boards
from STMicroelectronics
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This patch enables the rtc so that the testcase
tests/drivers/counter/counter_basic_api
can run on this nucleo_g071rb board
also when running sanity check
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The --nrf-family argument has been unnnecessary since 6628a16
(" runners: nrfjprog: boilerplate and recover rework").
Remove a few stragglers that are still using it, to avoid it being
copy/pasted into other board definitions.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The following features: 'i2c' and 'netif:eth' are now used in the
ip_k66f board. Let's mark them in the "supported:" section of the
ip_k66f.yaml.
The latter one is necessary as a prerequisite to run some tests (like
e.g. netif:eth is necessary to run network related ones).
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Support the ST STM32 Nucleo-64 development board with
STM32L433RC SoC.
Tested samples: hello_world, blinky and button.
Signed-off-by: Matija Tudan <mtudan@mobilisis.hr>
By default nrfjprog presumes the pin reset will be used, and helpfully
enables it regardless of whether CONFIG_GPIO_PINRESET is selected or
not. Stop it from doing this so the second button can be used for the
application as requested.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The SAME70-XPLD board comes with an EEPROM that holds the MAC address
to be used with its Ethernet interface. Enable that feature by
default, so the application doesn't have to.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The default behavior of the log reader is to dump the full device trace
buffer. But that can contain output from a previous run and the state
parser in twister can get confused. Add a "--no-history" argument that
emits only new log data, which corresponds more closely to the way a
hardware UART would work.
(Code change is just two lines, everything else is comments & docs)
Fixes#30979
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
For a while now, we've had two APIC drivers. The older was preserved
initially as the new (much smaller, "new style") code didn't have
support for Quark interrupt handling. But that's long dead now. Just
remove it.
Note that this migrates the one board using this driver (acrn) to
CONFIG_APIC_TIMER instead.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This change adds support for configurable interrupt capabilities
in the emulated GPIO controller via Devicetree bindings.
Fixes#26477
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
The NPCX SMB modules provides full support for a two-wire SMBus/I2C
synchronous serial interface. Each SMBus/I2C interface is a two-wire
serial interface that is compatible with both Intel SMBus and Philips
I2C physical layer. There are 8 SMBus modules and 10 buses in NPCX7
series.
In NPCX7 series, the SMB5 and SMB6 modules contain a two-way switch to
support two separate SMBus/I2C buses (ports) with one SMB module
(controller) Please refer Section 4.7.2 in the datasheet. In order to
support it, this CL seperates the i2c driver into port and controller
drivers. The controller driver is in charge of i2c module operations
and internal state machine. The port driver is in charge of pin-mux
and connection between Zehpyr i2c api interface and controller driver.
All of modules have separate 32-byte transmit FIFO and 32-byte receive
FIFO buffers. These FIFO buffers reduce firmware overhead during long
SMBus transactions by allowing the Core to write or read more than one
data byte at a time to/from the SMB module.
The CL also includes:
— Add npcx i2c port/controller device tree declarations.
— Zephyr i2c api implementation.
— Add "i2c-0" aliases in npcx7m6fb.dts for i2c test suites.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
Documentation update with information on how to run twiter integration
testing on this board. Also elaborate the discussion of permissions
setup.
(Longer term, it would be better to include a udev example of how to
set permissions on those files rather than doing it manually, and to
include fuller instructions on how to build the needed SOF driver
instead of just priving a link to a github tree.)
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add script signing and flashing up_squared_adsp board. Can be used:
$ west flash \
<zephyr>/boards/xtensa/up_squared_adsp/tools/flash.sh
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The existing implementation of the adsplog.py script worked fine for
individual runs (e.g. when running specific code) but had no support
for detecting system reset events and thus could not be used for
monitoring applications like test automation. It also could not
handle the case where a rapid log burst would overflow the buffer
before being noticed at the client. Also, the protocol here was also
rife with opportunities for race conditions. Fix all that up via what
is mostly a rewrite of the script. The protocol itself hasn't
changed, just the handling.
Also includes some changes to the trace_out.c code on the device side.
These are required to get ordering correct to make race conditions
tractably handleable on the reader side.
Some of the specific cases that are managed:
* There is a 0.4s backoff when a reset is detected. Continuing to
poll the buffer has been observed to hang the device (I'm fairly
sure this is actually a hardware bug, reads aren't visible to the
DSP software).
* The "no magic number" case needs to be reserved for detecting system
reset.
* Slot data must be read BETWEEN two reads of the ID value to detect
the case where the slot gets clobbered while being read.
* The "currently being filled" slot needs to always have an ID value
that does not appear in sequence from the prior slot.
* We need to check the full history in the buffer at each poll to
detect resets, which opens up a race between the read of the "next
slot" (which is absent) and the full history retrieval (when it can
now be present!). Detect that.
* A null termination bug in the current output slot got fixed.
Broadly: this was a huge bear to make work. It sounds like this
should be a simple protocol, but it's not in practice.
Also: clean up the error reporting in the script so it can handle new
PCI IDs being added, and reports permissions failures on the required
sysfs file as a human-readable error.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Change-Id: I211817620db2130ffb275a5962a24bf90aad57e9
Co-authored-by: Kevin Townsend <kevin@ktownsend.com>
Signed-off-by: David Vincze <david.vincze@linaro.org>
Musca-S1 is a Cortex-M33 based SoC. It's similar to the
Musca-B1, but among other things the embedded flash has
been replaced with embedded MRAM (eMRAM) memory.
The Musca-S1 files have been created based on the Musca-B1
SoC and board files.
Add the Musca-S1 board to the list of allowed platforms
for the TF-M integration examples.
Change-Id: I4f517d28d0a5b8c4a3fc3fab73adb5519acfc3c2
Signed-off-by: David Vincze <david.vincze@linaro.org>
This branch adds support for the nucleo_f303k8 board.
The configuration is based on the nucleo_l011k4,
the f302r8 and the ST reference manual.
I had successfully tested the following sample code:
blinky
blink_led (uses TIM2_CH1 on PA0)
button
hello_world
Signed-off-by: Sebastian Schwabe <sebastian.schwabe@mailbox.tu-dresden.de>
Convert drivers to use pinmux devicetree node to create pinmux device
object.
On intel S1000 we add 'label' as a required property and set it to
'PINMUX' to match CONFIG_PINMUX_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Apart from the previously added pins, nRF21540's GPIO interface includes
also MODE pin. This commit adds this pin to relevant devicetree.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
The FEM requires a dedicated SPI interface. This commit puts it on SPI3,
removing the arduino SPI support.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Depending whether doorbell or plain versions are enabled, it will set
the right flags to qemu.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This commit adds more information about the litex_vexrscv board
target, including references to related projects and instruction
about generating bitstream for the Digilent Arty A7-35T Board.
Signed-off-by: Robert Winkler <rwinkler@antmicro.com>
In newer OpenOCD version from Zephyr's SDK v0.12, there are some
changes in OpenOCD scripts: JTAG probe interface (AKA "adapter")
setup, see http://openocd.zylin.com/#/c/5784/
And so we need to change OpenOCD scripts accordingly to match
newer OpenOCD version from Zephyr's SDK v0.12.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
OpenOCD cofig command: ftdi_device_desc description provides the
USB device description (the iProduct string) of the adapter. And If not
specified, the device description is ignored during device selection.
In newer OpenOCD version from Zephyr's SDK v0.12, there are some
changes in OpenOCD scripts.
In file interface/ftdi/digilent-hs1.cfg, ftdi_device_desc will be set to
"Digilent Adept USB Device", while we get the iProduct string
"Digilent USB Device" from em_starterkit adapter. it's better not
specify it and only use the vid and pid of the adapter for selection.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
XIP (eXecute In Place) is a method of executing programs directly
from long term storage (i.e flash memory). It allows us to
avoid copying text it into RAM, saving writable memory for dynamic
data and not the static program code.
We don't have such non-volatile memory capable for executing in
place on HSDK so we load Zephyr image to DDR memory with debugger
each time.
Disable XIP option for HSDK as we don't need it.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
On introduction of a "simplified" HSDK configuration where we only
use 2 cores out of 4 (in assumption that it will be working much
more reliably) we excluded a bit too much of details from OpenOCD script.
In particular we stripped not-used cores from JTAG chain description
which made OpenOCD quite unhappy:
----------------------------->8----------------------------
Info : ftdi: if you experience problems at higher adapter clocks, try the command "ftdi_tdo_sample_edge falling"
Info : clock speed 10000 kHz
Info : JTAG tap: arc-em.cpu2 tap/device found: 0x200c24b1 (mfg: 0x258 (ARC International), part: 0x00c2, ver: 0x2)
Warn : JTAG tap: arc-em.cpu2 UNEXPECTED: 0x200c24b1 (mfg: 0x258 (ARC International), part: 0x00c2, ver: 0x2)
Error: JTAG tap: arc-em.cpu2 expected 1 of 1: 0x200424b1 (mfg: 0x258 (ARC International), part: 0x0042, ver: 0x2)
Info : JTAG tap: arc-em.cpu1 tap/device found: 0x200824b1 (mfg: 0x258 (ARC International), part: 0x0082, ver: 0x2)
Warn : JTAG tap: arc-em.cpu1 UNEXPECTED: 0x200824b1 (mfg: 0x258 (ARC International), part: 0x0082, ver: 0x2)
Error: JTAG tap: arc-em.cpu1 expected 1 of 1: 0x200024b1 (mfg: 0x258 (ARC International), part: 0x0002, ver: 0x2)
Info : JTAG tap: auto0.tap tap/device found: 0x200424b1 (mfg: 0x258 (ARC International), part: 0x0042, ver: 0x2)
Info : JTAG tap: auto1.tap tap/device found: 0x200024b1 (mfg: 0x258 (ARC International), part: 0x0002, ver: 0x2)
Error: Trying to use configured scan chain anyway...
----------------------------->8----------------------------
That lead us to the situation when the target cores were programmed
in a wrong way effectively failing all tests. Fixing it now.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
During review of ARC port of OpenOCD some changes were requested
in particular:
1. L2 cache (SLC in ARC parlance) semantics, see
http://openocd.zylin.com/#/c/5688/
2. JTAG probe interface (AKA "adapter") setup, see
http://openocd.zylin.com/#/c/5784/
And so we need to change OpenOCD scripts accordingly to match
newer OpenOCD version from Zephyr's SDK v0.12.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
There are three groups of sensors on this board, each of which
requires a different I2C bus configuration and a different power
supply. Currently only the CCS811 is supported.
Change the board configuration to pull the necessary information about
the CCS811 supply switch from devicetree, and to supply power based on
whether the device is enabled in devicetree (rather than whether a
driver is selected). The implementation is designed to support
additional supply switches (there are at least six on the board, most
of which are dedicated).
Also document the I2C configuration necessary for the other sensors.
There is currently no way to select alternative configurations without
editing the devicetree binding, but at least they're available for use
in overlays.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This reverts commit 7492841dd1.
Enabling CONFIG_INTEL_VTD_ICTL on UP Squared board results
in tests and apps hanging. So revert this for now.
Relates to #30574
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Enable spi1 interface that connects to STM module SPBTLE-RFTR on the
stm32l562e_dk board.
Tested the configuration with st_ble_sensor sample + ST BLE Sensor
app on Android phone.
Signed-off-by: Yestin Sun <sunyi0804@gmail.com>
