clock control is required for "fast instances" so assert clock
is enabled alongside PM DEVICE RUNTIME. Update UART tests to
reflect this requirenment.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Add test which is using two independent UART devices. Validate behavior of
asynchronous API.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
We fix 2 issues:
First issue: __aligned attribute is in bytes
second issue: we should align depending on the platform
Signed-off-by: Abderrahmane JARMOUNI <git@jarmouni.me>
Add overlays required to run the test on:
- nrf54l09pdk/nrf54l09/cpuflpr,
- nrf54l20pdk/nrf54l20/cpuflpr.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Explicitly disable device runtime PM since this test is expecting
it to be disabled and there are SoC now that turns on it by default.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Remove the support of the Nucleo WBA52CG board since it is NRND
(Not Recommended for New Design) and it is not supported anymore
in the STM32CubeWBA from version 1.1.0 (July 2023).
Signed-off-by: Nidhal BEN OTHMEN <nidhal.benothmen@st.com>
When CONFIG_COVERAGE is enabled then performance is degraded.
In that case higher baudrates shall be avoided because CPU may
not have enough time to handle UART interrupts. Limit baudrate
to 115200 when CONFIG_COVERAGE=y.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add ULP Coprocessor board support for C6.
This requires a change in the board qualifier depending on the build
target.
Update esp32c6 overlay and configuration files to the proper name.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Add some overlay files for the silabs xg29_rb4412a board to enable tests
on the board. Also add the platform to some testcase.yaml files.
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
The UART test for USART needs to move the console to an EUSART instance
in order to free up USART0 for the test. Since EUSART1 is configured for
SPI use by the board DTS, use EUSART0 for console.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Rename the driver from uart_native_posix to uart_native_pty.
Including renaming the DTS compatible, and kconfig options, deprecating
the old ones.
And refactor the driver, generalizing it, so we can have any number of
instances.
Note that, unfortunately generalizing to N instances cannot be done
without a degree of backwards compatibility breakage: This driver was
born with all its configuration and selection of the instances based on
kconfig.
When the driver was made to use DT, it was done in a way that required
both DT and kconfig needing to manually coherently enable the 2nd UART.
This has now been fixed, which it means only DT is used to decide how
many instances are avaliable, and UART_NATIVE_POSIX_PORT_1_ENABLE is
just ignored.
Including:
* Deprecate UART_NATIVE_WAIT_PTS_READY_ENABLE: the options is always on
now as it has no practical drawbacks.
* Deprecate UART_NATIVE_POSIX_PORT_1_ENABLE: DTS intanciation defines it
being available now.
* Rename a few functions and in general shorten pseudo-tty/pseudo-
terminal to PTY instead of PTTY.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This commit fixes the following
bug.Issue link:
https://github.com/zephyrproject-rtos/
zephyr/issues/86399.
Some users reported data access
violations due to the qualifier.
Removing static ensures proper memory
alignment and avoids potential
memory access issues.
Signed-off-by: S Swetha <s.swetha@intel.com>
This commit disables CONFIG_TEST_USERSPACE in
intel_rpl_s_crb.conf of uart_async_api
testcase.Enabling this config introduces
restrictions that interfere with cacheable
regions by blocking access and modifying
cache attributes.By disabling this
configuration, the following issues
are resolved:
-Cacheable region retain their attributes.
-Execution and data transactions work without
restrictions.
-System behavior align with expected
configuration in privileged mode.
-Some code primarily relying on non-cache
region continues to work.
This change is neccessary to ensure
cachebale memory regions function as intended
without interferance from user mode restrictions.
Signed-off-by: S Swetha <s.swetha@intel.com>
This commit aligns the buffers to 32 bytes in
uart_async_api testcases.This is because most
of the platform DMA operations are aligned to
32 bytes.This ensures proper memory alignment
for cache handling and avoid potential
unaligned access issues.
Signed-off-by: S Swetha <s.swetha@intel.com>
Add UART test overlays for Nucleo N657x0-Q and STM32N6570 DK boards.
Remove non serial boot conf file since they are now unnecessary.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Test was staring a TX transfer and aborting it after 300 us from
the timer handler. Test was assuming that ongoing transfer will
not finish in those 300 us. This might not be true for higher
baudrates. Instead of using fixed timeout, a value is calculated
from the baudrate and targets to abort the transfer after approx.
20 bytes of 95 byte long transfer.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Clean up after automatic merge. Some test configurations got removed
and multiple lines enabling test for nrf54l09pdk/nrf54l09/cpuapp
target remained at the bottom of the file.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
uart120 requires device runtime to be enable. Enable it for nrf54h20dk.
When device runtime PM is used for interrupt driven and polling API
then UART device is initially suspended. It means that RX is disabled.
In order to enable RX device must be explicitly resumed using PM API.
Test is enabling UART RX (uart_rx_enable) from counter callback
(interrupt handler context). For fast instance on nrf54h20dk (uart120)
it is not allowed because PM resume can only be called from the thread
context. Because of that, test is skipped for uart120 and asynchronous
API.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Move enabling of counter to the test instead of test setup. Test may be
skipped in some configurations and in that case counter shall not be
started so by moving setup to the test code allows skipping test before
counter is started.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add check for status okay for dut2. Compilation was failing if dut2
existed but was disabled.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Some time ago a new shim for nRF UARTE was added (uart_nrfx_uarte2.c)
which used nrfx_uarte.c driver underneath. It was supposed to support
nrf54x platforms. However, later on legacy driver (uart_nrfx_uarte.c)
was extended to support nrf54x platforms and it takes less code size,
has better performance and more features. Shim uart_nrfx_uarte2 will
no longer be supported. As new shim is the default and there is a
Kconfig to pick the legacy shim (CONFIG_UART_NRFX_UARTE_LEGACY_SHIM=y)
it cannot be deprecated in the normal way. Additional Kconfig option
is created (DEPRECATED_UART_NRFX_UARTE_LEGACY_SHIM) which is enabled
if CONFIG_UART_NRFX_UARTE_LEGACY_SHIM=n and it selects DEPRECATED.
A warning was also added to the CMakeLists.txt.
Patch removes use CONFIG_UART_NRFX_UARTE_LEGACY_SHIM in tests.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add new target to the following tests:
- uart_elementary
- uart_async_api
- uart_mix_fifo_poll
- uart_pm
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
