The Adafruit Feather ESP32S3 is a development board in the Feather
standard layout, sharing peripheral placement with other devices labeled
as Feathers or FeatherWings. The board is equipped with an ESP32-S3 mini
module, a lithium ion battery charger and a USB-C connector.
Signed-off-by: Leon Rinkel <leon@rinkel.me>
Rename the driver from uart_native_posix to uart_native_pty.
Including renaming the DTS compatible, and kconfig options, deprecating
the old ones.
And refactor the driver, generalizing it, so we can have any number of
instances.
Note that, unfortunately generalizing to N instances cannot be done
without a degree of backwards compatibility breakage: This driver was
born with all its configuration and selection of the instances based on
kconfig.
When the driver was made to use DT, it was done in a way that required
both DT and kconfig needing to manually coherently enable the 2nd UART.
This has now been fixed, which it means only DT is used to decide how
many instances are avaliable, and UART_NATIVE_POSIX_PORT_1_ENABLE is
just ignored.
Including:
* Deprecate UART_NATIVE_WAIT_PTS_READY_ENABLE: the options is always on
now as it has no practical drawbacks.
* Deprecate UART_NATIVE_POSIX_PORT_1_ENABLE: DTS intanciation defines it
being available now.
* Rename a few functions and in general shorten pseudo-tty/pseudo-
terminal to PTY instead of PTTY.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Pinoroni Pico Plus2 is an RP2350B based board that has
more rich I/O, RAM, and Flash than the original Raspberry Pi Pico2.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Including renaming the DTS binding and kconfig options
deprecating the old one.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
A macro introduced allows to log four-character-codes (FOURCC) as one
string instead of enumerating each individual character. This saves a bit
of room in the code and is less error-prone.
Signed-off-by: Josuah Demangeon <me@josuah.net>
For the CCM mode, increase slightly the output buffer size because
the cc23x0 directly fills this buffer with 16-byte blocks.
This prevents from doing unnecessary memcpy that would have an
impact on the driver's performance.
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Extend several flash samples and tests so that they can also be used
with "jedec,mspi-nor" devices.
Add configurations needed for the nrf54h20dk/nrf54h20/cpuapp target.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
native_posix is being removed as it has reached its end of life in 4.2,
after being deprecated since 4.0.
So these overlays will not serve any purpose anymore.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is being removed as it has reached its end of life in 4.2,
after being deprecated since 4.0.
Remove the twister support for native_posix[//64] and therefore all
references to them from the testcases and samples yamls, so twister
does not error out.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This updates the documentation of all the EnjoyDigital boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The harness was set to ztest, but the sample requires the console
harness to match on the "sample complete" line, its not actually
using ztest.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Allow user to add shell commands in testcase/sample yaml file
alongside the harness_config like in the console harness.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
This commit adds support for these multicore samples:
- samples/drivers/mbox
- samples/drivers/mbox_data
- samples/subsys/ipc/ipc_service/static_vrings
- samples/subsys/ipc/openamp
Signed-off-by: Tomas Galbicka <tomas.galbicka@nxp.com>
Add configuration and board overlay in the I2S audio codec sample to
demonstrate usage of the newly introduced audio output feature.
Signed-off-by: Titouan Christophe <moiandme@gmail.com>
The shell harness expects the UART can be routed to stdin/out on POSIX
arch based targets, but this is not the case for the bsim targets (at
least not yet, and not using the native_posix UART configuration option)
This causes these tests to fail timing out in CI => let's filter these
platforms by now.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add i2c_bus_short fixture to the rtio_loopback sample to ensure it
is only run on boards with the bus shorted. The i2c_bus_short
fixture is also used in the i2c_target_api test suite.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Enable spi_flash sample for MAX32655FTHR and MAX32655EVKIT
which have an external Winbond W25Q128jv external flash.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
Signed-off-by: Rob Cornall <Rob.Cornall@analog.com>
Signed-off-by: Yasin Ustuner <Yasin.Ustuner@analog.com>
Enable DAC entry in device tree and pinctrl (PB13/PB14).
Update doc/yaml files to include ADC info.
Update the sample for sam4s_xplained.
Signed-off-by: Ibe Van de Veire <ibe.vandeveire@basalte.be>
nucleo_C071rb overlay file contains all ADC node configurations
to be able to run the sample.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Move overlays and conf from boards to socs in following samples :
- samples/drivers/adc/adc_dt
- samples/drivers/counter/alarm
- samples/drivers/dac
- samples/subsys/settings
Signed-off-by: Marek Matej <marek.matej@espressif.com>
add more samples
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Add support for xg24_rb4187c to the ADC sample app. Configure two
channels, one measuring the AVDD supply against the 1.21V bandgap
reference, and one measuring pin PB1 (wired to button 0) against
the AVDD (VDDX) reference.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
The sample app draws rectangles in the corner of the display.
On devices with the SCREEN_INFO_X_ALIGNMENT_WIDTH capability,
each draw needs to transmit a complete line. Make the sample
work on such displays (e.g. the `ls0xx` driver) by making the
rectangles take up the full width of the display.
Co-authored-by: Benjamin Cabé <kartben@gmail.com>
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Remove ADC2 support (identified as adc1 entry)
for additional ESP32-C3 based board targets.
Other boards have those instances already deleted.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The user of the ft8xx driver can register a callback function called
on a touch detection interrupt event. This function is extended to
include a user-defined pointer. The user-defined pointer helps to share
a callback with multiple driver instances.
Signed-off-by: Hubert Miś <hubert.mis@gmail.com>
Improve the FT8xx display driver to support multiple driver instances.
The ft8xx_reference_api.h still follows the FT8xx programming guides,
limiting the usage of the driver to one instance.
Signed-off-by: Hubert Miś <hubert.mis@gmail.com>
Add overlays for nrf54h20dk_nrf54h20_cpuppr. Moved common configuration
for nrf54h20dk to nrf54h20dk_nrf54h20_common.dtsi. Add configuration
for vpr_launcher on nrf54h20dk_nrf54h20_cpuapp.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Rename video_fourcc() to VIDEO_FOURCC(), differing from the Linux
implementation, but more compliant with the coding style.
Also introduce a VIDEO_FOURCC_FROM_STR() to generate a FOURCC format
code out of a 4-characters string.
Signed-off-by: Josuah Demangeon <me@josuah.net>
This commit adds support for these multicore samples:
- samples/drivers/mbox
- samples/drivers/mbox_data
- samples/subsys/ipc/ipc_service/static_vrings
- samples/subsys/ipc/openamp
Signed-off-by: Tomas Galbicka <tomas.galbicka@nxp.com>
This examples shows how to use the AD4114 ADC on a
stm32f3_disco board.
As the AD4114 is a 24bits ADC resolution we need to be able
to pass 32bits buffer to get the samples.
CONFIG_SEQUENCE_RESOLUTION is set to 12 instead of 24, and the
gain zephyr,vref-mv is adapted to avoid overflows using the
exisiting adc_raw_to_millivolts function.
Signed-off-by: Pierrick Curt <pierrickcurt@gmail.com>
Adjust the Kconfig symbols of the capture to lvgl sample. LV_MEM_CUSTOM has
been removed in v9.0 and LV_USE_IMG has been changed to LV_USE_IMAGE.
Fix the changed fields for the image descriptor struct.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
The RP2350's PWM peripheral is largely unchanged from the RP2040's, but
the higher clock frequency means the long blink delay must be lower.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
The Raspberry Pi Pico 2's device is compatible with the existing Pico 1.
The build system requires a `<board>.overlay` file, but these use the
pre-processing to #include the sibling rpi_pico.overlay files rather
than duplicating the contents as an attempt to keep things DRY.
Tested locally.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
The LoRa driver does not allow to pass void* user_data to callback in
lora_recv_async function. This leads to complex way of using the API. This
commit fixes the issue and adds the field to the function and to the
callback.
Signed-off-by: Aleksander Dejewski <aleksander.dejewski@gmail.com>
Convert qspi and hyperflash to variants instead of revisions by popular
demand.
And convert evkb into a revision instead of a different board.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add an integration platform to the LoRa samples so that changes to these
applications are checked in the PR CI.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Add sample which clearly and thorougly shows how to use RTIO with
I2C controllers, both synchronously and async, comparing it with
the "standard" I2C API, in an controlled environment. Both the I2C
controller and I2C target are managed by the sample, using loopback
to monitor and control the I2C transfers.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Add a new option to control usage of DT nodelabel board_power. This
option also allows to select GPIO when needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add options to control the behavior of sw0/sw1. These options also allow
to select GPIO when needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add Devicetree overlay for sample drivers/led/pwm and fix the one in
basic/blinky_pwm for nucleo_l4r5zi board to set appropriate to enable
pwdleds and set appropriate timer prescaler.
Signed-off-by: Yishai Jaffe <yishai1999@gmail.com>
The Adafruit QT Py ESP32-S3 needs to have GPIO hogs enabled in order to
use the onboard RBG LED with the led_strip sample code.
Signed-off-by: Ian Wakely <raveious.irw@gmail.com>
Do hflipping at camera level to avoid using PxP which impacts camera
framerates on RT10xx. Moreover, on RT11xx, PxP is already reserved
for 90 CCW image rotation.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Add an option to mirror the video image horizontally. This helps
to avoid doing so at the post-processing step by using additional
HW such as PxP on i.MX RT platforms.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Make APP_CPU board name auto generated and remove the related config.
Remove the boards overlay and replace with a socs overlays.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
This PR fixes a blocking call to video_buffer_alloc in case of memory
shortage by addign a timeout parameter to the API.
Signed-off-by: Armin Kessler <ake@espros.com>
Commit 55d9d1c6ba
("samples: led: consolidate LED samples under same directory")
moved the led_strip sample from samples/drivers to samples/drivers/led.
But commit f54a53b4b3
("drivers: ws2812_gpio: Make timing configurable and less hardware
dependend") was merged at the same time and added the bbc_microbit.conf
file to the old location.
This patch moves bbc_microbit.conf to its correct location.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
It is no longer needed to enable a specific flash driver in the sample
configuration. An appropriate driver (together with its dependecies,
like the SPI bus) for a given target will be enabled automatically
based on what is enabled in DTS.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
It is no longer needed to enable a specific flash driver in the sample
configuration. An appropriate driver (together with its dependencies,
like the SPI bus) for a given target will be enabled automatically
based on what is enabled in DTS.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Correct "zephyr,sram" property under /chosen node to make board and samples
compatible with new SoC memory description.
Signed-off-by: Marcio Ribeiro <marcio.ribeiro@espressif.com>
Signal-to-noise ratio is a unitless quantity, so its unit is dB, not
dBm (dBm is the power relative to 1 milliwatt). At the same time output
the received payload using `LOG_HEXDUMP_INF`, instead of limiting the
sample solely to string payloads.
Fixes#82414
Signed-off-by: Jordan Yates <jordan@embeint.com>
Convert them to native YAML lists. Support for space-separated
lists was deprecated in Twister a long time ago.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Change `GPIO39` to `GPIO38` in overlay.
The esp32s3_devkitc rgb led is connected to GPIO38, not 39.
Tested change on board and verified to function as intended.
Signed-off-by: david burke <david@aheng.io>
This uses Linux V4L2 controls as a reference to give names to the
CIDs. Apply the renaming down to the drivers that use them.
Signed-off-by: Josuah Demangeon <me@josuah.net>
add display type for fixtures to avoid conflcts
in NXP platform
1. add required regex for console harness.
2. add message after processing, ensure the flow is OK
3. reduce the test time in TEST mode
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Add a simple demonstration of the led_write_channels api on the lp5569
driver sample.
The demonstration simply turns on all of the channels with a single call to
led_write_channels. Then the same is done for turning off the channels.
Thus, it doesn't add much visually, but it shows the usage of the api.
Signed-off-by: Emil Dahl Juhl <emdj@bang-olufsen.dk>
This PR adds arduino giga r1 overlay in the dac sample.
Arduino Giga R1 has a 3.5mm audio jack connected to the
dac.
Signed-off-by: Mario Paja <mariopaja@hotmail.com>
The nRF54L05 and nRF54L10 are identical to the nRF54L15 except for their
memory sizes. Add support for emulating those ICs on the nRF54L15DK.
This commit only adds support for the main application core. Support for
the FLPR core may be added later.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
A valid device tree configuration is provided for the ADCs of the 8 input
channels and the sample adc_dt works out of the box. Obviously this is
not the only possible configuration but it provides a good template for
further customization without the need to lookup the ADC GPIOs and
connections in the schematics.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
Add `hifive_unmatched//s7` (earlier selected by default, using
`hifive_unmatched`) and `hifive_unmatched//u74` targets.
Define work-area for other 4 cores in openocd.cfg
Update twister platform white/black lists, to support new targets
Signed-off-by: Jakub Wasilewski <jwasilewski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add `hifive_unleashed//e51` (earlier selected by default, using
`hifive_unleashed`) and `hifive_unleashed//u54` targets.
Define work-area for other 4 cores in openocd.cfg
Update twister platform white/black lists, to support new targets
Signed-off-by: Jakub Wasilewski <jwasilewski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
ARGB8888 values all had alpha '0x00' (=transparent).
Changed them to '0xFF' and added a transparency test patch in the middle
of the screen.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
The newly introduced `frame_incomplete` flag of
`display_buffer_descriptor` needed to be added at several places to
avoid uninitialized memory.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
Updates and fixes to support IPM sample on ESP32:
- fix IPM sample code for APPCPU and PROCPU
- align with memory layout, add flash awarenes
- shell commands to stop/start APPCPU
- reorganize overlays
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Twister's extra arguments feature only works correctly if the fully
qualified platform name is given, which was not the case. Make all
platform names for the shield testcase fully qualified to resolve this.
Fixes#80876
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
LPC54114 does not define arduino_header nodelabel, so it cannot be
supported by the shield test within the display sample. Replace with
mimxrt1010_evk, which is supported.
Fixes#80876
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Led blinking period was made configurable and time unit changed
from sec to msec recently in the source code of the sample.
Console harness regex was not changed accordingly in sample.yaml.
Device testing fails when run with twister.
Change the regex to accept any period and change the units to msec.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
The default frame rate is printed as a floating point number. Without
enabling CONFIG_REQUIRES_FLOAT_PRINTF, it is not printed at all. Fix it.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
In preparation of adding a check for dead references, this commit fixes
currently broken zehpyr_file: links.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Without this, check_compliance.py suggests to run clang-format on the
changed code lines.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This change extends what e1e19732bc
(samples: drivers: crypto: Aligned AES key) has started: For certain
architectures (i.e. Si32), the alignment of the used buffers is
important as the AES HW engine uses DMA and inherits its restrictions.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Commit e1e19732bc (samples: drivers:
crypto: Aligned AES key) introduced the alignment for the key. According
to the commit message, the intention was to align the variable at 32 bit
boundaries. For this reason, passing 32 to __aligned seems like an
error, as its argument is denoted in byte and not bits.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
- Modify the macro in source code AGT to get the right data from
device tree
- Modify name of agt node
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
Add the Kconfig menu to the sample configuration.
Update sample.yaml by adding the shield configuration.
Signed-off-by: Charles Dias <charlesdias.cd@outlook.com>
This updates the documentation of all the WeAct boards
to use the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Longan boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the UDOO boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the STM32 boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Quicklogic boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the NXP boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the GigaDevice boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Ezurio boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The CONFIG_DUMMY_DISPLAY is now enabled in conjunction with devicetree,
So, no need to be explicitly enabled.
Remove the setting.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
For the "References" section to be useful, it needs to include a call to
the target-notes directive, which is the one that actually generates the
list of references made in the current document.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This commit fixes the following issues for adp_xc7k/ae350
1. Incorrect copyright due to copy-paste error
2. Separate RAM region for the host and remote clusters
3. Allocate hart 0 for host and hart 1 for remote cluster
4. Use mbox channel 9, 10 for the sample, leaving channel/irq source
1 ~ 8 for ae350 8-core IPI
Signed-off-by: Jimmy Zheng <jimmyzhe@andestech.com>
Enable support for FRDM_RW612 with memc driver sample, using attached
aps6404l PSRAM.
Signed-off-by: David Missael Maciel <davidmissael.maciel@nxp.com>
Output the timestamp of the PPS timepulse when printing the fix
information, if the driver support the timepulse and it has started
toggling.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Consolidate the testcase.yaml definition for the display sample where
possible to use a single testcase for all shields. This won't work for
all testcases, but helps avoid the pattern where a new testcase using
"platform-allow" is added for every shield/board combination that needs
to be run with this sample.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
- boards: renesas: Add support for agt.
- drivers: counter: Add support for counter driver use agt
- dts: arm: Add support for agt.
- dts: bindings: Add support for agt counter driver.
- soc: renesas: Add support for agt counter driver.
- samples: drivers: counter: alarm: Add support for RA8
This is initial support with only basic functionality for counter
operation on Zephyr using AGT hardware, current support for
count source is limited to LOCO and PCLKB, other count source
like underflow signal external pin or AGTIO from another AGT
channel will be added in later support
Signed-off-by: Ha Nguyen <ha.nguyen.fz@bp.renesas.com>
Signed-off-by: Thao Luong <thao.luong.uw@renesas.com>
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
Currently, the camera fixture test can only tell whether data are dumped
onto memory. This is to check further if the image content is correct.
The algorithm is rather simple: compare the average color of each bar
of a generated pattern with a predefined target in CIELAB76 color
space (which is nearly perceptually uniform).
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
The logs that the fixture test are based on are not printed anymore due
to recent changes from "printk" to "LOG_DBG". Change the log level so
that it can work again.
Remove "Capture started" as it is not a relevant test regex. Logs are
sometimes not correctly printed in the console, for example, we can see:
DEBUG - DEVICE: muart:~$ [mapture started
As "Capture started" is a one-time log, fixture test will then fail due
to timeout.
Also, consolidate other regex.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Use EXTRA_CONF_FILE in sample yaml files,
that replaced deprecated OVERLAY_CONFIG
since the Zephyr v3.4 release.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
SAADC peripheral for nRF54L Series allows to choose internal
voltages as positive inputs and samples shall showcase that.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Do not apply format setting unless needed. Also, correct the check for
the RGB565 format setting- the zephyr display API treats RGB565 and
BGR565 as big endian, so the format needed here is BGR565.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add support for using the SMARTDMA engine on the FRDM-MCXN947 board with
the video capture sample.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Handle line_offset field within video capture sample. Other samples do
not support partial framebuffers and therefore can ignore this field.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove the unnecessary video-controls header included in video.h.
Drivers, applications should explicitly include it when needed.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Make the blinking and fading parameters adjustable so that samples
can be run on devices that support only short periods.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Disable CDC ACM logging in the configuration overlays used to select the
CDC ACM UART as the shell backend.
The build warning was introduced by the commit e8c4867806
("usb: cdc_acm: disable logging if used for shell with logging")
to prevent recursive logging when using the CDC ACM UART as shell or
logging backend
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add sample application to capture an image frame from a camera
and send it for display on LCD via the LVGL library.
Signed-off-by: Charles Dias <charlesdias.cd@outlook.com>
Align all existing samples/tests/applications which
contains nrf54l15pdk/nrf54l15/* by adding
nrf54l15dk/nrf54l15/* to enable twister builds.
Signed-off-by: Katarzyna Giądła <katarzyna.giadla@nordicsemi.no>
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Add code to get the current frame rate and enumerate all supported frame
rates (frame intervals) of the current format.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
This commit uses the new .. zephyr:code-sample-category directive to
categorize code samples across the tree.
Updates existing legacy references to manually defined targets to now
use :zephyr:code-sample-category: role instead.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add Devicetree overlay for samples basic/blinky_pwm and drivers/led/pwm
for frdm_mcxc242 board to set appropriate tpm clock source and
to enable pwmleds.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Commit 911abc33e6 did move the samples
from subsys/ to drivers/, and more contribution came in parallel.
This covers extra board configurations added later which also need
moving.
Signed-off-by: Josuah Demangeon <me@josuah.net>
Fixes bad usage of single backticks in lieu of double backticks for
rendering inline literals, or simple '*' for italics.
When appropriate, a better construct than double backticks has been
selected (ex. :file:, :kconfig:option:, :c:func:, ...), or proper :ref:
have been used if the original intention was to have a link.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
As there is no check (yet!) in the directive, many
.. zephyr-app-commands:: in the documentation are pointing to
non-existing sample applications, which is problematic for users who
typically expect to just copy-paste the commands and have them work.
This commit fixes all offending references to point to existing samples,
or converts them to simple ":app:" instead of ":zephyr-app:" when the
intent wasn't to refer to in-tree samples.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Use generic hook infrastrucutre instead of custom Kconfig and hooks for
ARM.
Replace z_arm_platform_init() with platform_reset().
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- Add overlay for the FRDM MCXN947 qspi variant
- Fix the overlay file name for the default variant
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
The current driver contains assembly code which is specific for the nRF51
SOC which makes it incompatible with other SOC's. This patch adds support
for other nRF SOC's as well. The timing is calucated based on the CPU clock
frequency, but can be configured manually as well if needed.
Changes have been verified on a Adafruit Feather nRF52840 Express board,
which contains a single NeoPixel RGB LED. Timings have been verified using
a scope connected to the WS1812 data line.
Signed-off-by: Chaim Zax <chaim.zax@zaxx.pro>
With over a dozen LED samples, grouping them in a common drivers/led/
folder helps keep things tidy and lays the groundwork for further
improvements in the way samples are showing up in the docs.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The flash controller is nowadays supported on the M4 core.
Add the bank2-flash-size property to the board definitions as required
by the STM32 H7 flash driver.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
New file with ADC configuration for UCANS32K1SIC evb.
Add ucans32k1sic_s32k146 to platform_allow.
Signed-off-by: Marcin Wierzbicki <marcin.wierzbicki@accenture.com>
This example demonstrates I2S audio playback combined with the codec
API. It can use the dmic API for audio input.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>
Commit consists of minimal set of overlays need to run tests
and samples. Additionally disables nRF54L15 platform in cpp98
tests, because unnamed unions are not supported.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
Remove `SPI_NOR_IDLE_IN_DPD` to simplify the possible transition states
in the `spi_nor` driver. This option was originally added 5 years ago
when device runtime PM was in a much less mature state.
I do not believe having a separate power management implementation for
this one in-tree driver is in the interests of the project.
The behaviour of `SPI_NOR_IDLE_IN_DPD` leads to extremly suboptimal
behaviour in use cases where multiple small reads are performed
sequentially, see #69588.
Removal of this option does not break the behaviour of any existing
applications, only increases current consumption in idle by ~10uA until
device runtime PM is enabled.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The driver in tree is for u-blox M8 devices, not M10. The M10 series
devices (from Protocol Version 23.01) use a different, non backwards
compatible interface for configuring the modem behaviour.
Of the two boards tested in the original PR, the "VMU RT1170" is
explicitly listed as having a u-blox NEO-M8N modem, while I have
been unable to find any information online about the "FMURT6" board.
Leaving the naming as-is will cause problems when M10 drivers are
contributed.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Exclude the nucleo_h755i_q m4 core from the flash_shell samples,
as the m4 core in stm32h7 parts does not have flash support in Zephyr.
Signed-off-by: Mike Banducci <michael.banducci@sandc.com>
Nrf54h20dk and nrf54l15 have UART Flow Control enabled
by default on all cores.
It's a source of problem when mbox sample is run in Twister.
Twister opens serial port only on host core,
thus nobody confirms reception of logs from remote core.
As a result, remote core stucks on printing boot banner.
Twister fails sample due to the timeout while waiting for messages
from remote to host.
Disable Flow Control on remote core when mbox sample is executed
on nrf54h20 or nrf54l15.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Move samples config files from 'boards' to 'socs' in order to
remove multiple files with the same configuration and render
available samples for new boards. Only changed sample files
which are not board or hardware specific.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Add support for testing IPC between cpuapp<>cpuflpr. Some adjustments
have been done to be able to support two different remote targets for
the nrf54h20dk cpuapp.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
"Video subsystem for Zephyr" is actually only defined as a driver
and the examples actually include <zephyr/drivers/video.h>.
Signed-off-by: Josuah Demangeon <me@josuah.net>
The commit fixes soc_flash_nrf sample documentation where incorrect
partition names has been used and removes information of
CONFIG_TRUSTED_EXECUTION_NONSECURE affecting which partition is used
as this is no longer true.
The printf message reporting start of sample has been modified
to print "Nordic nRF5 Flash Sample" instead of
"Nordic nRF5 Flash Testing", which is more accurate for code
residing in samples.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This has been renamed in b6ed4ba761, the current entry is causing a CI
breakage for unrecognized platform.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
In the sample, print the jesd216_bfp_density is expressed
in bits. add the unit to avoid confusion with the Flash
density expressed in bytes (dw2 entry)
Page size is for programming expressed in bytes, meaning
program execution on bytes basis or here page basis.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Now that flash controller driver is supported on M4 of stm32h745i_disco,
remove it from platform_exclude list and add an overlay for flash_shell
sample.
Signed-off-by: Murali Karicheri <murali.karicheri@sandc.com>
Now that flash controller driver is supported on M4 of stm32h747i_disco,
remove it from platform_exclude list and add an overlay for flash_shell
sample
Signed-off-by: Murali Karicheri <murali.karicheri@sandc.com>
Added i2c configuration to test target_eeprom case for frdm_ke17z
Added `sample.drivers.i2c.target.kinetis` in sample.yaml for frdm_ke17z
and frdm_ke17z512 automatically run the tests
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
The sample will print a ping-pong message indefinitely on both,
application (or main) core and remote core. When twister is run in
device testing mode, only one terminal is evaluated (application), so
the regex just needs to account for the application core output, not
remote.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Fix build error due to cmake requiring a separate
overlay for each of this target's SOCs.
Error being fixed:
```
-- Board: sam_v71_xult, qualifiers: samv71q21
CMake Error at cmake/modules/extensions.cmake:2742 (message):
Board sam_v71_xult defines multiple SoCs.
Shortened file name (sam_v71_xult.overlay) not allowed, use
'<board>_<soc>.overlay' naming
```
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Uses the variable for the default image when adding sysbuild
dependencies so that they can be copied out-of-tree and still work
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Print on what board/core sample is executing.
Print how many bytes of data can be sent
in the mbox message (show use of mbox_mtu_get_dt()).
Print how many channels are available for incoming and/or
outgoing messages (show use of mbox_max_channels_get_dt()).
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
`checkpatch.pl` requires that dts sources are indented with tabs,
fix all the spaces that slipped in while checkpatch wasn't watching.
Signed-off-by: Jordan Yates <jordan@embeint.com>
A specific test case for STM32 RTC is needed because of the way Counter
node is selected in preprocessing.
Tests STM32 RTC_Alarm using counter_ll_stm32_rtc driver.
This also clarifies how STM32 RTC Alarm can be used in this test.
Signed-off-by: Abderrahmane Jarmouni <abderrahmane.jarmouni-ext@st.com>
The overlay was in the root of the sample folder instead of the boards
folder. This is clearly a mistake.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Define the configuration to run the test on the external memory
xspi flash of the stm32h573i_dk disco kit in MemoryMapped Mode
Reading is done with memcopy and erase/write are aborting operation
to send the appropriate command
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The sample is added to demonstrate mspi_transceive asynchronously.
Apollo3 MSPI controller has hardware command queue and supports
scatter IO and callback management, so no additional software queue
is required.
Signed-off-by: Swift Tian <swift.tian@ambiq.com>
The sample code is copied from spi_flash. To flash API, there is no
difference if the bus is spi or mspi.
Signed-off-by: Swift Tian <swift.tian@ambiq.com>
