Raymond Lei 581e7ff2aa drivers: spi: nxp: flexiospi spi_loopback test failed on flexio spi ... Several reason cause loopback test failed: a) FlexIO input frequency is not correct, on RT11xx, input freq is 24M, while max baud rate can reach 1/4 of input freq, so it can only support 6Mbps. b) Flexio shift register depend on correct timer output to triggger TX and RX, if timer comparison value is not accurate, RX error happens on high baud rate. This is the reason why test fails on RT1060. also fix a error on FlexIO clock ID calculation. Signed-off-by: Raymond Lei <raymond.lei@nxp.com>		2025-06-27 09:05:47 -10:00
..
adi/max32	soc: adi: max32: Add dependency to idle cpu hook	2025-05-28 01:46:50 +02:00
aesc	soc: Add aesc	2025-05-14 14:09:41 +02:00
ambiq	soc: ambiq: workaround for issue #90777	2025-06-17 07:22:44 +02:00
amd/acp_6_0
andestech	linker: move last section id constant to c-code	2025-05-08 15:55:40 +02:00
antmicro/myra
arm	boards: mps4: Add initial support for corstone315	2025-06-23 16:30:52 -05:00
aspeed
atmel
bflb	soc: bflb: enable clock_control for bl60x	2025-06-21 10:40:20 +02:00
brcm
cdns	xtensa: support for more than 32 interrupts	2025-06-27 08:59:56 -10:00
common
efinix/sapphire
ene	drivers: watchdog: watchdog driver	2025-06-27 10:57:20 +02:00
espressif	xtensa: support for more than 32 interrupts	2025-06-27 08:59:56 -10:00
gaisler
gd/gd32
infineon	board: infineon: add XMC7200 Eval board support	2025-05-28 21:29:20 +02:00
intel	soc: intel_adsp: (cosmetic) make a function static	2025-06-27 09:04:12 -10:00
ite/ec	drivers/espi: ite: Add it51xxx compatibility with it8xxx2 support retained	2025-06-16 14:12:44 +02:00
litex/litex_vexriscv
lowrisc/opentitan
mediatek/mt8xxx	soc: mediatek: fix typo in macro name	2025-06-17 17:45:47 +02:00
microchip	soc: microchip: sam: update NUM_IRQS default value for sama7g5	2025-06-27 09:42:36 +02:00
native/inf_clock	soc posix: Be explicit about wanting the function address	2025-05-13 12:09:30 +02:00
neorv32	soc: neorv32: list NEORV32 v1.11.6 as currently supported version	2025-06-26 10:52:21 -10:00
nordic	drivers: spi: Support spim01/spis01 instances for nordic devices	2025-06-27 10:58:02 +02:00
nuvoton	boards: npcx: add support for npck3m8k_evb	2025-06-26 09:39:11 +02:00
nxp	drivers: spi: nxp: flexiospi spi_loopback test failed on flexio spi	2025-06-27 09:05:47 -10:00
oct/osd32mp15x
openhwgroup/cva6	soc: cv32a6: Remove erroneous CPU_HAS_FPU configs	2025-04-18 17:46:30 +02:00
openisa/rv32m1	soc/openisa: Discard .note.GNU-stack sections while linking	2025-06-17 16:06:21 +02:00
qemu
quicklogic/eos_s3
raspberrypi/rpi_pico	soc: raspberrrypi: rp2350: Add missing FPU support	2025-06-11 16:19:59 -07:00
realtek/ec	driver: crypto: add crypto driver for rts5912	2025-06-07 13:29:07 +01:00
renesas	boards: renesas: Fix incorrect partnumber for RSK-RX130	2025-06-27 09:42:49 +02:00
renode
rockchip
sensry	soc/sensry: Discard .note.GNU-stack sections while linking	2025-06-17 16:06:21 +02:00
sifive/sifive_freedom	soc/sifive: differentiate between FE310-G000 and FE310-G002	2025-06-02 17:37:32 +02:00
silabs	soc: silabs: siwx91x: Clean output names	2025-06-27 10:06:16 -05:00
snps
st/stm32	bluetooth: stm32wbax: add temperature calibration of linklayer	2025-06-26 10:59:31 -05:00
starfive/jh71xx
telink/tlsr
ti	soc: ti: k3: Add AM64 R5F core support	2025-06-27 09:42:06 +02:00
wch/ch32v	soc: Add support for the WCH CH32V303	2025-05-24 18:03:53 +02:00
xen
xlnx	soc: xlnx: zynq7000: remove FPU FMAC support	2025-06-27 09:50:43 -05:00
CMakeLists.txt
Kconfig
Kconfig.v2