Generator was enabled some time ago to use sys_rand32_get() however this
function is no longer in use.
Signed-off-by: Bartlomiej Buczek <bartlomiej.buczek@nordicsemi.no>
Loopback with D4 <-> D5 to avoid a failed test with the error
"physical pull-down does not read low."
It looks like pins D2-D3 couldn't be configured to pull-up
for some reason.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Add overlay required to run gpio_basic_api test on
- nrf54l09pdk/nrf54l09/cpuflpr and
- nrf54l20pdk/nrf54l20/cpuflpr.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Add gpio driver testcase support for kv260. The overlay will select the
PS gpio bank to be tested.
For running this testcase on kv260 PS gpio bank 3 has been chosen
because it is EMIO and design is required to connect pins together.
Signed-off-by: Paul Alvin <alvin.paulp@amd.com>
Refactor the existing NEORV32 board to become a UP5KDemo board variant for
the NEORV32 board. The software configuration of this board matches the
NEORV32 "UP5KDemo" processor template.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add some overlay files for the silabs xg29_rb4412a board to enable tests
on the board. Also add the platform to some testcase.yaml files.
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
Add GPIO driver support for RZ/A3UL
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
Signed-off-by: Quang Le <quang.le.eb@bp.renesas.com>
Signed-off-by: Tien Nguyen <tien.nguyen.zg@renesas.com>
Pinoroni Pico Plus2 is an RP2350B based board that has
more rich I/O, RAM, and Flash than the original Raspberry Pi Pico2.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Added gpio expander pca6416 support on the board, it use i2c bus to
expand IO ports.
Added GPIO test case overlay for the board.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Added gpio expander pca6416 support on the board, it use i2c bus to
expand IO ports.
Added GPIO test case overlay for the board.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Current test gpios conflict with I2C SCL and SDA lines. In order to run
both I2C and GPIO test on hardware, change pins used used in
gpio_basic_api test.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
Added device tree nodes in imx8mp_evk_mimx8ml8_a53.dts, and also
added board overlay in gpio_basic_api test case.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Convert qspi and hyperflash to variants instead of revisions by popular
demand.
And convert evkb into a revision instead of a different board.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
To avoid compilation on boards that do not have arduino_i2c defined,
we will clarify that it is dependent on it.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Add test configuration for Awinic AW9523B.
This device is a GPIO Expander, and no boards currently implement it.
Define the connection that connects it via the Arduino header and
define a fixture to enable it.
This has been confirmed with nucleo_h503rb.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Enable this test, and provide overlays, in the nrf5340bsim
Note this test specs 2 GPIO pins to be shorted. This can be done
for the simulation target by calling zephyr.exe with the option
`-gpio_conf_file=shorts_config.txt`
Where that file would contain this one line (for the provided overlay),
for the cpunet:
---- shorts_config.txt
short 1.1 1.2
----
And this for the cpuapp:
---- shorts_config.txt
short 3.1 3.2
----
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this test, and provide overlays, in the nrf54l15bsim
Note this test specs 2 GPIO pins to be shorted. This can be done
for the simulation target by calling zephyr.exe with the option
`-gpio_conf_file=shorts_config.txt`
Where that file would contain this one line (for the provided overlay)
---- shorts_config.txt
short 1.1 1.2
----
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
1. add delay read config for platforms that has capacitor with pin
2. add dts pin flags to gpio_pin_config when output.
Signed-off-by: Hake Huang <hake.huang@nxp.com>
