The hawkbit subsystem was erroneously using DNS_MAX_NAME_SIZE as the
maximum query length. This limited query strings to only 20 bytes,
truncating many domain names.
Signed-off-by: Neal Jackson <neal@blueirislabs.com>
Because this is a common testing scenario, almost any counter instance
should be able to run. Some counter instances cannot run this sample
should be filtered by platform_exclude or filter keywords.
Signed-off-by: The Nguyen <the.nguyen.yf@renesas.com>
Migrate renesas,ra-agt-counter implementation to use hal_renesas.
Add additional AGT_CLOCK_SUBCLOCK count source.
Add constraint for counter resolution to 32 or 16 bit variant.
Signed-off-by: The Nguyen <the.nguyen.yf@renesas.com>
Updated set_drp_toggle to handle differences in TCPCI revisions.
Added a macro for TCPCI revision and read it from the chip register
during initialization.
Signed-off-by: Jianxiong Gu <jianxiong.gu@outlook.com>
When TF-M is enabled, Mbed TLS's MD module (which is used to generate
v5 UUIDs) will dispacth hash operations to TF-M. Unfortunately TF-M
does not support SHA-1 (because it's a weak algorithm) so the
computation will fail.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
- "bt_le_adv_update_data()" func calls just after bt_enable() call
without completion of bt_ready() which is called as part of worker
thread within init_work() causes issue where bluetooth controller
has not been initialized and provides cb to app before app requests
advertise_update to the stack.
- remove bt_ready() func and place content within main() post
bt_enable() fixes this issue.
Signed-off-by: Nirav Agrawal <nirav.agrawal@nxp.com>
Some IPM devices return an error if we request to transfer data.
Use IPM_MAX_DATA_SIZE to determine if the virtio ID can be transferred
through the IPM device.
Send data to IPM only if CONFIG_IPM_MAX_DATA_SIZE is not zero.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
The ipm_send() allows transferring data through the IPM device.
However, depending on the platform, the mailbox peripheral may either
transmit a limited amount of data or not transfer data at all.
Introducing this configuration allows exposing the IPM capability to the
application.
This commit defines a default value of 1024 bytes to avoid impacting
existing IPM drivers and sets the value to 0 for the STM32 IPCC and
STM32 HSEM devices.
This allows, in a next step, other devices to use this configuration to
expose their capabilities instead of using proprietary configuration or
a static definition.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
The name of the boards was incorrect in the documentation,
Fix the name of the board according to the official name.
Signed-off-by: Miguel Gazquez <miguel.gazquez@bootlin.com>
In almost all WCH boards doc, the name of the processor had a typo:
QingKe 32-bit RISC-V4F instead of QingKe V4F 32-bit RISC-V
Fix the doc for all relevant boards.
Signed-off-by: Miguel Gazquez <miguel.gazquez@bootlin.com>
Fix issues reported by string validation which was added to strings
used in zassert macros.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
In enum tcp_state {}, the CLOSED state was put at the last one.
When we do Sequence & Ack validation, we will need to skip the
CLOSED, LISTEN, SYNSENT states. It is easier for coding if we
put the CLOSED to the front, e.g. if state > SYNSENT. And, in
other OSes, the state sequence is normally defined like this.
Signed-off-by: Shrek Wang <inet_eman@outlook.com>
Update to a revision of the manifest action that includes:
https://github.com/zephyrproject-rtos/action-manifest/pull/21
Also add the corresponding binary blobs labels parameters to the
workflow.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This test only works for 64-bit values. On targets which use 32 bits for
double, skip this version. The float test will check the 32-bit math for
that.
This is the 'nicer' version of this fix which uses sizeof rather than
relying on __SIZEOF_DOUBLE__.
Signed-off-by: Keith Packard <keithp@keithp.com>
When both CONFIG_NET_IPV6_DAD and CONFIG_NET_IPV4_ACD are disabled, the
anonymous union in struct net_if_addr ends up with no members, which
results in a different struct layout between C and C++.
In C, an empty union has size 0, while in C++ it has size >=1, which
shifts the offsets of the following fields.
Add a 1-byte dummy member to the union to ensure consistent layout
across both compilers.
Signed-off-by: Adrian Gielniewski <adrian.gielniewski@nordicsemi.no>
The spi_loopback_transceive() helper currently only prints a
message if a configuration is invalid, continuing the test
case as if it succeeded. This results in the test case using the
helper trying to validate the result from a spi transaction that
was skipped.
Fix this by explicitly skipping the test using the ztest
framework's ztest_test_skip() function, which skips the entire
test case.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
- Add devicetree for AM6232, the dual core AM62 processor without GPU
- Used in revision A0 of PocketBeagle 2
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
- AM6232 is a dual core variant of AM6234 with everything being same.
- Used in the first batch of PocketBeagle 2
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
With e337b7b65d, the test started to
fail with stack overflows in the no_optimizations scenario, so give
the ztest thread a little more space.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Update the lfxo node load-capacitance-femtofarad to
match the chosen external lfxo on the nRF54L15-DK design.
Previous stray capacitance value was incorrect, which
resulted in a too low load capacitance.
Signed-off-by: Håkon Alseth <haal@nordicsemi.no>
- Setting default value of passive scan
dwell time of 400ms as SDK doesn't
configure default value.
Signed-off-by: Nitin Pandey <nitin.pandey@silabs.com>
Add cmake linker generator things for .last_section.
Follow up to #88970. Fixes bug #89719, for gcc/ld & iar
Signed-off-by: Björn Bergman <bjorn.bergman@iar.com>
This is a host driver for ESP32 chips running the esp-hosted
firmware, which turns ESP32s into a WLAN/BT co-processor.
Signed-off-by: Ibrahim Abdalkader <i.abdalkader@gmail.com>
As TinyCrypt gets deprecated, we need to remove all bsim tests that use
it. This commit switches all Bluetooth mesh bsim tests to PSA as a
default crypto backend.
This includes:
- removing `CONFIG_BT_MESH_USES_TINYCRYPT` as PSA is default crypto
backend for mesh. `CONFIG_BT_MESH_USES_MBEDTLS_PSA` is not required to
be enabled;
- merging `overlay_psa.conf` into `prj.conf` as this configuration
becomes default for all mesh bsim tests;
- merging `overlay_ss.conf` into `overlay_pst.conf` as secure storage is
required for running persistent storage bsim tests with PSA;
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This is a preparation commit for switching all bsim tests to PSA as
TinyCrypt will be removed soon.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
