Fix#32918 [Coverity CID :219528] "Arguments in wrong order
in tests/drivers/pwm/pwm_loopback/src/main.c"
Signed-off-by: Guðni Már Gilbert <gudni.m.g@gmail.com>
Test to ensure that a reset with a waiting thread properly aborts the
wait, and the semaphore remains functional after.
Signed-off-by: James Harris <james.harris@intel.com>
Debugging long-tail semaphore test failures currently is rather
annoying, both because many semaphore test failures do not print
their failing values, and because some semaphore tests do not
check return codes, leading to test failures well after the actual
failure.
Redo the semaphore tests to at least give consistent failure
messages including the actual return code and consistently check
return codes of k_sem_* APIs.
Also driveby-fix several places that used an insufficiently-
sized type to store k_uptime.
Signed-off-by: James Harris <james.harris@intel.com>
Currently there is no way to distinguish between a caller
explicitly asking for a semaphore with a limit that
happens to be `UINT_MAX` and a semaphore that just
has a limit "as large as possible".
Add `K_SEM_MAX_LIMIT`, currently defined to `UINT_MAX`, and akin
to `K_FOREVER` versus just passing some very large wait time.
In addition, the `k_sem_*` APIs were type-confused, where
the internal data structure was `uint32_t`, but the APIs took
and returned `unsigned int`. This changes the underlying data
structure to also use `unsigned int`, as changing the APIs
would be a (potentially) breaking change.
These changes are backwards-compatible, but it is strongly suggested
to take a quick scan for `k_sem_init` and `K_SEM_DEFINE` calls with
`UINT_MAX` (or `UINT32_MAX`) and replace them with `K_SEM_MAX_LIMIT`
where appropriate.
Signed-off-by: James Harris <james.harris@intel.com>
The test case suggests that "For most arch which support
userspace, derefencing NULL pointer will be caught by
exception.". This is certainly not true for Cortex-M, where
read access to address 0x0 is generally allowed. The reason
the test had been passing was either 1) because in many
Cortex-M platforms, including QEMU, address 0x0 is unmapped,
or 2) GCC is generating an undefining instruction. However,
now that we have activated the null pointer derefrencing
detection, we may end up with two exceptions and the test
would fail.
Change illegal access to something outside the mapped memory
area, e.g. 0xFFFFFFFF.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In the arch/arm test suite there are tests running with
CONFIG_NO_OPTIMIZATIONS enabled, and may require a
larger idle thread stack size.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Temporarily save and restore all callee-saved registers
in the sub-routine, not only the frame pointer, to avoid
errors if compiler chooses to use them in the alternative
thread function. The callee-saved regs are restored after
the alternative thread switches back in.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Its been 2 releases since we deprecated the old zephyr integer types.
We can now remove support for the Kconfig option, code, and, test to
allow the old int types to be supported.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Tests to exercise the new `cbprintf_package()`, `cbvprintf_package()`
and `cbpprintf()`.
[ Heavily based on a prior proposal from Peter Bigot. ]
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Improve dynamic interrupt test cases of interrupt for platform such as
x86, x86_64, native_posix, this improve code coverage of it.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
Enable the CONFIG_TEST switch in the test suite.
This allows certain required Kconfig settings for
ARM Cortex-M (which depend on TEST) to be enabled
when executing the test suite.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This kconfig isn't actually exercised in this test, it's just being
used to compute some sleep durations. Also I want it gone.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Instead of hardcoding the network interface value, use
net_if_ipv6_select_src_iface() so that proper network interface
gets used.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This sets the dts of dma for using the uart asynch api.
The stm32l475 has a dmamux with request 2 for Tx/Rx usart4
The Tx&Rx pins (PA0, PA1) of the usart4 are connected
on the disco_l475_iot1 board to pass the test.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
AArch64 has support for PSCI. This is especially useful for SMP because
PSCI is used to power on the secordary cores.
When the PSCI driver was introduced in Zephyr it was designed to rely on
a very PSCI-centric subsystem / interface.
There are two kinds of problems with this choice:
1. PSCI is only defined for the non-secure world and it is designed to
boot CPU cores into non-secure state (that means that PSCI is only
supposed to work if Zephyr is running in non-secure state)
2. There can be other ways or standards used to start / stop a core
different from PSCI
This patch is trying to fix the original wrong assumption by making the
interface / subsystem a generic one, called 'pm_cpu_ops', and using PSCI
only as an actual driver that is a user of this new interface /
subsystem.
For now the new subsystem is only exposing two methods: cpu_on and
cpu_off, others will probably follow according to the needs.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The way these scripts looked for the current working directory
was not correct or reliable. With this change it should
work properly.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
When the kernel links in virtual address space, the data
structures needed for the z_phys_map() no longer point to physical
addresses (which are required for z_phys_map() to work). So skips
these tests if CONFIG_KERNEL_LINK_IN_VIRT=y.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Now that the old API has been reimplemented with the new API remove
the old implementation and its tests.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The new API cannot be used from userspace because it is not merely a
wrapper around existing userspace-capable objects (threads and
queues), but instead requires much more complex and lower-level access
to memory that can't be touched from userspace. The vast majority of
work queue users are operating from privileged mode, so there's little
motivation to go through the pain and complexity of converting all
functions to system calls.
Copy the necessary pieces of the existing userspace work queue API out
and expose them with new names and types:
* k_work_handler_t becomes k_work_user_handler_t
* k_work becomes k_work_user
* k_work_q becomes k_work_user_q
etc. Because the replacement API cannot use the same types new API
names are also introduced to make it more clear that the userspace
work queue API is a separate functionality.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This is needed because Zephyr libraries created after
`find_package(Zephyr)` are not pure Zephyr libraries, as they are not
in the `whole-archive` linking grouping.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Set integration_platforms on these samples to a single platform, we
prefer native_posix, than a qemu platform mps2_an385 and finally a
hardware platform.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Set integration_platforms on these tests to just native_posix. This
should be sufficient to make sure these tests build and run.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Set integration_platforms on these tests to just mps2_an385. This
should be sufficient to make sure these tests build and run.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Set integration_platforms on these tests to just native_posix. This
should be sufficient to make sure these tests build and run.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Set SEARCH_PATH to "." instead of `pwd` if not set explicitly. This
avoids the construction of paths that contain `pwd` twice in test
scripts such as ll.1.sh.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Add a test case for the null pointer dereferencing detection
feature in Cortex-M. The test case is added in arm_interrupt
test suite and the README file is updated accordingly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Enable the null-pointer dereferencing detection by default
throughout the test-suite. Explicitly disable this for the
gen_isr_table test which needs to perform vector table reads.
Disable null-pointer exception detection on qemu_cortex_m3
board, as DWT it is not emulated by QEMU on this platform.
Additionally, disable null-pointer exception detection on
mps2_an521 (QEMU target), as DWT is not present and the MPU
based solution won't work, since the target does not have
the area 0x0 - 0x400 mapped, but the QEMU still permits
read access.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The stream_flash_buffered_write, when invoked to do flush write, will
attempt to write the tail bytes from the buffer, filling the required
minimal write block size with erase value bytes; after write it rewinds
the buffer offset, bytes_written, by number of the "filler bytes".
Doe to lack of return code processing from flash_sync call, two things
would happen to context in case of failure:
1) the ctx->bytes_written would be rewind pass the value it had before
function call as it gets decremented by "filler bytes" even if write
failed;
2) the ctx->buf_bytes offset would be accounting for added "filler
bytes" which should not be counted as data in buffer.
Proper processing of return code has been added to remove effects
described above.
Unit tests have been expended to cover the scenarios.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The flash_sync function is able to call, if specified, write
verification callback to check whether data flash has been correctly
written to a flash. Part of that procedure is to read date back of
the flash and call the verification callback on the buffer;
in case if the read would fail, the flash_sync would return,
with an error code, without updating stream_flash_ctx.
The same logic should be applied to failed verification, but, due to
missing return, the stream_flash_ctx gets updated with probably
incorrectly written bytes added to total bytes_written and buf_bytes,
representing number of bytes awaiting in buffer, being zeroed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The stream_flash_erase_page would update stream_flash_ctx member
last_erased_page_start_offset, to page offset it attempted to erase,
even if such operation failed.
The commit changes this behaviour so that in case of failure the
last_erased_page_start_offset would still hold previously, successfully,
erase page offset.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Such instance is needed for building drivers that use DEVICE_DT_GET()
to get the pointer to the GPIO controller device structure.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add some testcases to tesing different condition of mailbox
API. Check API robust in different input parameters is handled.
such as invoke API to get data with NULL input.
Signed-off-by: Jian Kang <jianx.kang@intel.com>
Conver the NIOS-II mSGDMA driver to be devicetree based. Add node for
dma controller into nios2f.dtsi.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add some testcases to test some unnormal branches,
for covering branches that not covered.Meanwhile,
Using the public fatal handler function to handle
fatal errors.
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
Convert how the dma test gets the dma device to use DEVICE_DT_GET
and remove use of CONFIG_DMA_0_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver and users of pinmux on mcux lpc platforms to getting
basic port info from devicetree (register address, label)
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Enable CONFIG_TEST in the message_capture test suite.
This allows certain Kconfig configurations, depending
on TEST, to be enabled.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Allow the test to run for non-secure firmware builds, by
removing the test-case for nonsense string, as this test-case
will likely produce a secure fault which will crash the kernel.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
tests/kernel/interrupt tests interrupt trigger functionality,
however, the Non-Secure Cortex-M mode does not have full control
of the interrupt handling, so this test cannot be guaranteed to
pass when executing in Non-Secure mode. Filter the test out for
Non-Secure Cortex-M builds.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Exclude the test_null_dynamic_name test-suite from running the
test, in Non-Secure mode (Cortex-M), because passing a NULL
device name de-references memory at 0x0 which is likely to
cause a SecureFault and crash the kernel.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The default shell configuration has heavy flash and memory requirements,
requiring project maintainers to set many configuration options to "n"
to keep flash and memory requirements within reason.
This adds a new configuration option, CONFIG_SHELL_MINIMAL, which will
disable flash and memory heavy options by default, and allow project
maintainers to select/imply only the options they want.
On a quick test from an ARM board I'm working on, enabling this option
cut flash space requirements by ~8 KB, and memory requirements by ~1 KB.
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
The test_timeout_abs case had baked in similar mistakes to the
off-by-one in the absolute timer implementation. FOR THE RECORD:
If you have an absolute timeout expiration set for a tick value "N",
and the current time returned by k_uptime_ticks() is "T", then the
time returned (at the same moment) by any of the *_remaining_ticks()
APIs must ALWAYS AND FOREVER BE EXACTLY "N - T" (also: "N - T > 0"
always, until the moment the kernel ISR hands off control to the first
timeout handler expiring at that tick).
The tick math is exact. No slop is needed on any systems, no matter
whether their clocks divide by milliseconds or not.
The only gotcha is that we need to be sure that the calls don't
interleave with a real time tick advance, which we do here with a
simple retry loop.
But, about slop... This patch also includes a related fix for the
test_sleep_abs(). On an intel_adsp (which has 50 kHz ticks, a
comparatively slow idle resume and interrupt entry, and even has two
CPUs to mess with latency measurements) I would occasionally see the
k_sleep() take more than a tick to wake up from the interrupt handler
until the return to application code. Add some real time slop there
(just 100us) to handle systems like this.
Fixes#32572
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This macro returns a node's name with unit-adddress, given its node
identifier.
The node name is useful information for the user to utilize for debug
information, similar to DT_NODE_PATH, or DT_LABEL.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The test defines driver instances for the devices in the tree, but
there's now a dummy driver for vnd,i2c that would also attempt to
define the same device on any platform that defaults CONFIG_I2C=y,
resulting in multiply-defined symbol errors.
native_posix does not default CONFIG_I2C=y, and because
CONFIG_I2C_TEST is hidden there's no way to turn it on or off at the
driver level, so disable the subsystem to mask the driver, leaving the
test code as the only place the devices are defined.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
THIS COMMIT DELIBERATELY BREAKS BISECTABILITY FOR EASE OF REVIEW.
SKIP IF YOU LAND HERE.
Remove the existing implementatoin of k_thread_abort(),
k_thread_join(), and the attendant facilities in the thread subsystem
and idle thread that support them.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
When the kernel is TICKLESS, timeouts are set as needed, and drivers
all have some minimum amount of time before which they can reliably
schedule an interrupt. When this happens, drivers will kick the
requested interrupt out by one tick. This means that it's not
reliably possible to get a timeout set for "one tick in the
future"[1].
And attempting to do that is dangerous anyway. If the driver will
delay a one-tick interrupt, then code that repeatedly tries to
schedule an imminent interrupt may end up in a state where it is
constantly pushing the interrupt out into the future, and timer
interrupts stop arriving! The timeout layer actually has protection
against this case.
Finally getting to the point: in recent changes, the timeslice layer
lost its integration with the "imminent" test in the timeout code, so
it's now able to run into this situation: very rapidly context
switching code (or rapidly arriving interrupts) will have the effect
of infinitely[2] delaying timeouts and stalling the whole timeout
subsystem.
Don't try to be fancy. Just clamp timeslice duration such that a
slice is 2 ticks at minimum and we'll never hit the problem. Adjust
the two tests that were explicitly requesting very short slice rates.
[1] Of course, the tradeoff is that the tick rate can be 100x higher
or more, so on balance tickless is a huge win.
[2] Actually it only lasts until a 31 bit signed rollover in the HPET
cycle count in practice.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
gen_isr_table uses 6 IRQs for testing. Originally, it uses IRQ 41-36.
However, the IRQ37 & 36 are enabled by other modules in NPCX chips.
Change TEST_NUM_IRQS to use 45-40 for the test.
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
The timeout might take more than 10ms in a heavily loaded system,
so increase the timeout to 20ms.
For example this is often seen for mps2_an385 platform.
Assertion failed at \
WEST_TOPDIR/zephyr/tests/net/socket/select/src/main.c:101: \
test_select: (tstamp <= FUZZ is false)
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This returns the available contingous space in the packet starting from
the current cursor position.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
This makes cbprintf_nano.c much closer to the standard printf and
therefore more useful. The following are now implemented:
- right justification for everything (only for numbers previously)
- precision value for numbers, chars and strings
- width/precision passed as arguments with *
- "unlimited" padding length
- lower/uppercase hex output
- the #, + and ' ' flags are supported
And the code was heavily reworked to reduce its size as much as
possible to mitigate the size growth. Still, the binary resulting
from cbprintf_nano.c is now between 10% and 20% bigger depending on
the architecture. This is still far smaller than cbprintf_complete.c
which remains about twice as big on average even without FP support.
Many unit tests that were skipped with CONFIG_CBPRINTF_NANO are now
enabled, and a few more were added for good measure.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The test infrastructure uses EXTRA_CPPFLAGS to control which
configuration is used, but this was also added to CMakeLists to ensure
a common optional infrastructure was always available. Since unit
tests don't use Kconfig, this actually prevented the test variants
from being selected.
Add the flag in the test itself, which works correctly since the test
includes the implementation directly.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When calculating the expected interval for threads other than
the first one, the test uses ms->ticks->cycles conversion to
figure out the bound of cycles permitted. Both lower and upper
bound conversions are using the k_*_to_*_floor32(). When
numbers involved are not wholly divisible, decimal points are
being truncated, resulting in incorrect intervals, and thus
failing tests. So change the calculation to appropriate
floor() or ceil() based on the boundary.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add two new macros for getting the chip select GPIO controller from a
SPI device:
- DT_SPI_DEV_CS_GPIOS_CTLR()
- DT_INST_SPI_DEV_CS_GPIOS_CTLR()
Now that we can get struct device pointers at build time directly from
a devicetree node identifier, it's useful to be able to get a
node_id for a CS GPIO controller from the SPI device, because that's
necessary for setting up the gpio_dev in a struct spi_cs_control.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This returns the node identifier for a node's bus. For example, for a
device on an I2C bus, it would return a node identifier for the I2C
bus controller.
We already have a DT_BUS() and DT_INST_BUS_LABEL(), but there hasn't
been a request or need for DT_INST_BUS() up until now, so it didn't
exist yet.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Extended test to check that multiple arguments are passed in
UTIL_LISTIFY macro.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In NPCX7 series, it contains two tachometer (TACH) modules that contains
two Independent timers (counter 1 and 2). They are used to capture a
counter value when an event is detected via the external pads (TA or
TB).
The CL also includes:
— Add npcx tachometer device tree declarations.
— Zephyr sensor api implementation for tachometer.
— Enable "tach1" device in npcx7m6fb.dts for testing.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This commit fixes some edge cases when using net_bufs with reserved
bytes (headroom) as fragments of a net_pkt.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
When operating on a net_pkt using the cursor functionality, reserved
bytes (headroom) are currently not respected.
This commit adds test cases exposing this problem. Fix will be
introduced in a later commit.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Absolute timeouts were covered, but nothing was testing their actual
expiration time and there was an off-by-one.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Besides implementing a customized pm_policy_next_state() in the
application layer, a customized device policy handler of power
management, pm_policy_low_power_devices(), is also needed if
CONFIG_PM_POLICY_APP is enabled. This CL adds this function to prevent
build errors.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This adds qemu_x86_lakemont to the platform allow list
for the FPU sharing tests. Since Lakemont supports SSE3
and SSSE3, it is better to test them also.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This driver emulates a EEPROM device in flash.
Reworked implementation with modified flash layout.
The emulation represents the EEPROM in flash as a region that is a
direct map of the eeprom data followed by a region where changes to
the eeprom data is stored. Changes are written as address-data
combinations. The size of such a combination is determined by the
flash write block size and the size of the eeprom (required address
space), with a minimum of 4 byte.
The eeprom page needs to be a multiple of the flash page. Multiple
eeprom pages is also so supported and increases the number of writes
that can be performed.
The eeprom size, pagesize and the flash partition used for the eeprom
are defined in the dts. The flash partition should allow at least two
eeprom pages. For fast read access a rambuffer can be enabled for the
eeprom (by setting the option rambuf in the dts).
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
arm_psci test suite is specific to ARM64, while
all other test suites in tests/arch/arm directory
are supported in Cortex-M architecture only. We
move arm_psci to arm64 directory, effectively,
separating tests suites for AARCH32 and AARCH64.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
If user sets CONFIG_NUM_PREEMPT_PRIORITIES=0, then the priority
of the net_mgmt thread will be -1 which is the same as idle thread.
This will trigger assert in kernel as then the minimum coop priority
is -2 in this case. Remove the net_mgmt thread priority setting from
Kconfig file as it is low value and set the coop thread priority
the same way as other network threads are doing it.
Fixes#32375
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Provide a helper to extract the devicetree node_id for a CLOCKS
controller from a clocks phandle array. This can be used with
DEVICE_DT_GET() to directly reference the corresponding controller
device.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Co-authored-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Correct a bunch of precision/analysis errors in this test:
* Test items weren't consistent about tick alignment and resetting of
the timestamp, so put these steps into init_timer_data() and call
that immediately before k_timer_start().
* Many items would calculate the initial timestamp AFTER
k_timer_start(), leading to an extra (third!) point where the timer
computation could alias by an extra tick. Always do this
consistently before the timer is started (via init_timer-data()).
* Tickless systems with high tick rates can easily advance the system
uptime while the timer ISR is running, so the system can't expect
perfect accuracy even there (this test was originally written for
ticked systmes where the ISR was by definition happening "at the
same time").
(Unfortunately our most popular high tick rate tickless system,
nRF5, also has a clock that doesn't divide milliseconds exactly, so
it had a special path through all these precision comparisons and
avoided the bugs. We finally found it on a x86 HPET system with 10
kHz ticks.)
* The interval validation was placing a minimum bound on the interval
time but not a maximum (this mistake was what had hidden the failure
to reset the timestamp mentioned above).
Longer term, the millisecond precision math in these tests is at this
point an out of control complexity explosion. We should look at
reworking the core OS tests of k_timer to use tick precision (which is
by definition exact) pervasively and leave the millisecond stuff to a
separate layer testing the alternative/legacy APIs.
Fixes#31964 (probably -- that was reported against up_squared, on
which I had trouble reproducing, but it was a common failure on
ehl_crb).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This adds X86 keyword to the kconfigs to indicate these are
for x86. The old options are still there marked as
deprecated.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The app_kernel benchmarking app has the config file for benchmarking
with floating point enabled, but it was never used. So add it
to the testcase.yaml.
Note that this also limits to run on one CPU on a SMP system as
the resulting numbers would be more consistent among runs.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Even though ARC QEMU has received advanced multiplication
instructions support recently the ARC QEMU in the latest
Zephyr SDK still misses them, so tinycrypt may execute
too long and reach timeout in case of execution on
slow host.
Disable tinycrypt for ARC QEMU platforms till we update
ARC QEMU in Zephyr SDK.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Move common code that may be used by different test units
from main.c to common.c. Main.c should be clean and responsible
for unit tests executioon only. Common functionalities should be
stored in separate file and provided to test source files by
appropriate header file.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add set of functions that will make possible to configure
radio Direction Finding Extension to transmit CTE for periodic
advertising.
Some of the new Radio API functions are provided as separate
functions changing the same Radio peripheral registers, e.g.
radio_df_mode_set_aoa, radio_df_mode_set_aod. This is done on
purpose and is related with lack of DFE in nrf52_bsim.
To avoid use of conditionally compiled constants to represent
e.g. CTE mode; separate functions were introduced.
Thanks to that DF unit tests are able to compile successfully
without changes in nrf52_bsim platform. Also if DFE is added
to nrf52_bsim there is no need to change the code until it is
desired.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
New test that verifies CoAP Acknowledgement initialization function
that create a response packet for given request. Both request and
expected response packets are given in the test as PDU.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Clear Floating Point Status and Control Register (FPSCR),
to prevent from having the interrupt line set to pending again,
in case FPU IRQ is selected by the test as "Available IRQ line"
Fixes#31982
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
A fairly common idiom in our test code is to put test-local data
structures onto the stack, even when they are to be used from another
thread. But stacks are incoherent memory on some platforms, which
means that such things may not get a consistent view of memory between
threads.
Just make these things static. A few of these spots were causing test
failures on intel_adsp_cavs15. More were found by inspection while
hunting for mistakes.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Thread stack memory on coherence platforms needs to be linked into a
special section (so it can be cached).
Also, the test_idle_stack case just can't work with coherence. It's
measuring the CPU's idle stack's unused data, which was initialized at
boot from CPU0, and not necessarily the CPU on which the test is
running. In practice on intel_adsp_cavs15, our CPU has stale zeroes
in the cache for its unused stack area (presumably from a firmware
memory clear at boot or something?). Making this work would require a
cache invalidate on all CPUs at boot time before the idle threads
start, we can't do it here in the test because we don't know where the
idle stack pointer is.
Too much work for an esoteric stack size test, basically. Just
disable on these platforms.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
ATT channels do support queueing buffer so it no longer need to block
waiting the tx_sem besides the buffer allocation already serves the
same purpose as the application will not be able to have more requests
than there are buffers available.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the prescaler is zero in the test, a div by zero would happen.
Add an assert to check for zero prescaler.
Fix CID 216790
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
There are several different issues when trying to build the icm42605
sensor driver:
* Missing entry in drivers/sensor/CMakeLists.txt
* Issues with #ifndef in header files
* Issues with const usage
* Missing function prototypes in headers
* Fix use of LOG_MODULE_REGISTER v LOG_MODULE_DECLARE
* Add missing dts node to tests/drivers/build_all/spi.dtsi
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Zephyr does not currently allow deviation from standard terminology
for a technology even if it is non-inclusive, until the corresponding
standards body has confirmed intent to change that terminology. The
terms used in a previous attempt to be inclusive do not match the
expected forthcoming standard terms.
Revert to standard terms until the new ones have been announced and
the switch made throughout Zephyr.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
It was discovered that TLS data/bss in stack need to be
aligned correctly or else incorrect variables would be
accessed. This makes tdata and tbss sections to have
odd sizes to make sure everything still works.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Two .conf files had enabled the CONFIG_BT_AUDIO_UNICAST config, but
without the CONFIG_BT_AUDIO which is a dependecy.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fixes problem when fs_opendir invoked on fs_dir_t object,
which is already holding information on opened directory,
overwrites references to other memory objects within
the fs_dir_t object causing resource leak.
If fs_opendir is invoked on already used fs_dir_t object,
it will return
-EBUSY.
Note: The change requires that all fs_dir_t objects should be
initialized to 0.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
That whether a FS implementation allow to open
same directory multiple time is FS implementation
dependent. It shouldn't be tested. Such test was removed.
However need to test whether API transfers failures from
underlying FS properly.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The commit adds initializations of fs_dir_t variables in preparation
for fs_opendir function change that will require fs_dir_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The commit adds initializations of fs_dir_t variables in preparation
for fs_opendir function change that will require fs_dir_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The commit adds initializations of fs_dir_t variables in preparation
for fs_opendir function change that will require fs_dir_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The commit adds initializations of fs_dir_t variables in preparation
for fs_opendir function change that will require fs_dir_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The commit adds initializations of fs_dir_t variables in preparation
for fs_opendir function change that will require fs_dir_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The fs_dir_t_init() function has been added that should be used
for initialization of fs_dir_t structures before passing them
to fs_open and other functions.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Enlarge the test thread stack size, to fix test case fail
in some board which need more stack size for testing, when
CONFIG_EXCEPTION_DEBUG is enabled.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
Start using DTS values for PCI Vendor ID and PCI BDF. For the PCI
Device ID we do not use DTS since this would require changing overlay
for different SKU board.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fix issue #31339 and #31419, test case fail due to access NULL did not
trigger a fatal error in some platform such as nsim_em and iotdk.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
The deadline scheduler as of commit ef626571b2 ("kernel/sched:
Optimize deadline comparison") got an optimization that requires that
the the cycle difference of the deadline time of the "first" and
"last" runnable thread never be higher than 2^31.
The test code here was masking off the bottom 31 bits of the generated
deadlines, so it looked OK. But because the actual setting of the
deadline values takes time too, it was still possible to select values
that would roll over. The window was VERY small, but the RNG on one
platform (up_squared) hit it.
Shrink the selected deadlines to live in a 30 bit space for safety.
Fixes#31508
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This reverts commit 79d73063af.
The issue #31333 is fixed so this can be reverted to
enable tests/kernel/context to run with demand paging enabled.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The definition for realloc() says that it should return a pointer
to the allocated memory which is suitably aligned for any built-in
type.
Turn sys_heap_realloc() into a sys_heap_aligned_realloc() and use it
with __alignof__(z_max_align_t) to implement realloc() with proper
memory alignment for any platform.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This patch replaces magic numbers with COAP_TOKEN_MAX_LEN value and
removes unnecessary castings of token buffer type.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
RFC 7252 (CoAP) specifies value of the Version (Ver) field in the
protocol header to value 1. This patch defines value of the Version
field to make packet initialization easier. All samples and tests
are updated to use the new COAP_VERSION_1 field when initializing
a CoAP packet.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
The inheritance test first creates a parent thread, and then
creates a child thread inside this parent thread. At the same
time inside the main thread, a resource pool is assigned to
the parent thread. However, when under SMP, it is possible
that the pool assignment is done between both parent/child
threads are getting pointers to the pool, due to multiple
threads are running. So when doing pool pointer comparison,
there is a mismatch between those pointers (like parent has
a null pool pointer while child is pointing to the actual
pool), and thus failing the test. So fix this by delaying
the parent from running under after pool assignment is done.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When coverage is enabled on x86_64, GCC uses relative addressing
to increment the gcov counters. The generated code of the test
function assumes execution is in the same location where
the linker places the test function. This does not work with
the execution test as it copies the function into another part
of memory and tries to execute from there. When the copied
function starts to run, the instruction pointer is at the newly
copied function. So any relative addressing with regard to
the instruction pointer now is invalid. Instead of
<generated code RIP + offset> for gcov counter as it should be,
now the copied code is trying to access the counter at
<copied code RIP + offset>, which points to incorrect
memory location (and possibly invalid/non-mapped memory).
To fix this, we need to tell GCC not to use relative addressing.
This can be accomplished by telling GCC to use the large memory
model. This is only used for this test as this option increases
code size quite a bit, and should not be used in general.
Fixes#30434
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This puts the transplanted_function into its own section so that
z_phys_map() can correctly map the whole range of memory used
by the function, in case someone decides to expand the function
to be bigger than a MMU page.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Review tests applicability so that it only relies on watchdog
compatible availability. Additionally, tweak APB prescaler
in case of window watchdog test, so that timeout value can be
achieved.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Set maximum window value as a test variable.
This allows to set a much shorter value that is compatible with
use in stm32 window watchdog.
Additionally, tweak test configuration so that it is applied on
compatible base (when available).
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Verify that we can open at least as many files, and at least as many
directories, as the configuration specifies.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The file cache allocation infrastructure changes if multiple file
systems are present with different configurations. Make sure both
allocation schemes are tested.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The mem_pool Kconfig API is deprecated as allocation now uses a k_heap.
Update to allocate a heap with the same amount of memory as was
defaulted with mem_pool customization.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
As some tests are enabling CONFIG_NEWLIB_LIBC, we need to
filter out that tests in case of missing NEWLIB support
in toolchain.
It can be done with 'filter: TOOLCHAIN_HAS_NEWLIB == 1'
filter in testcase.yaml
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
The test_mem_domain_migration test creates a new thread with
different priority based on whether SMP is enabled. This causes
an issue where SMP=y and MP_NUM_CPUS=1 where the spin_entry()
would spin forever (with k_busy_wait()) and not yielding since
it has cooperative priority. Fix this by using MP_NUM_CPUS to
figure out which priority to use, as it is valid configuration
to have SMP=y and MP_NUM_CPUS=1.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fixes problem when fs_open invoked on fs_file_t object, which is already
holding information on opened file, overwrites references to other
memory objects within the fs_file_t object causing resource leak.
If fs_open is invoked on already used fs_file_t object, it will return
-EBUSY.
Note: The change requires that all fs_file_t objects should be
initialized to 0.
Fixes: #29478
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds initializations of fs_file_t variables in preparation
for fs_open function change that will require fs_file_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds initializations of fs_file_t variables in preparation
for fs_open function change that will require fs_file_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds initializations of fs_file_t variables in preparation
for fs_open function change that will require fs_file_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds initializations of fs_file_t variables in preparation
for fs_open function change that will require fs_file_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds initializations of fs_file_t variables in preparation
for fs_open function change that will require fs_file_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The fs_file_t_init() function has been added that should be used
for initialization of fs_file_t structures before passing them
to fs_open and other functions.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Basic explanation of what this test is doing, was missed in the commit
where the test was added.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The commit fixes three things:
- the order of zassert_* checks has been often incorrect, and some
checks of values have been done after some other operations has
been performed;
- some operations have been missing checks at all;
- most of zassert_* messages have been given ret parameter to be
printed but it has been missing from format string.
This addresses:
Coverity CID :215714
GH Issue: #31668
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Increase thread counter before the assert, otherwise in case of fail
the output will give the impression that the same thread ran more than
once.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Adjusting the tick alignment of this test caused it to start breaking
on nRF5 platforms, which use a 32768 Hz clock that doesn't divide
evenly into the millisecond precision used by the test. The "half
slice" math ended up being wrong by a bit.
Convert to ticks first before computing the cycle delay needed.
Fixes#29705
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Confirm that several ways of producing formatted output on the console
all work, and support evaluating the relative space requirements for
each.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
cbprintf should not pull in stdio.h unless it needs to, specifically
to get the FILE type for prototyping the stream substitutions. The
unit test assumes that these functions are always declared. For unit
testing where Kconfig isn't involved we need to tell the build system
to always provide them.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
../src/main.c:662:13: warning: cast from pointer to integer of different
size [-Wpointer-to-int-cast]
662 | int sock = (int)p1;
| ^
../src/main.c: In function 'spawn_child':
../src/main.c:671:4: warning: cast to pointer from integer of different
size [-Wint-to-pointer-cast]
671 | (void *)sock, NULL, NULL, 0, K_USER,
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
the implementation of spinlock validation uses two LSB bits in the
bottom of a pointer union to store a CPU index, which only has space
for 4 CPUS. the MP_NUM_CPUS should be <= 4.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
The way the test is implemented requires some adaptation to
be effective on all STM32 boards.
I'm not adding per board code on purpose, as this would be a
never ending story.
Fixes#31582
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Fix BIG Sync Terminate Command to generate Sync Established
event if Sync initiation is in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Clean up logging menuconfig by grouping configuration into
sections like: mode, processing configuration, backends.
Additionlly, removed LOG_ENABLE_FANCY_OUTPUT_FORMATTING which is no
longer in use.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The DF tests are implemented to be executed with nrf52_bsim platform.
The nrf52_bsim platform does not include Direction Finding Extenstion.
Due to that, radio_df.c compilation failed with error about missing
antenna configuration in DTS.
To solve the problem, I've changed nrf.cmake to include radio_df.c
file when CONFIG_BT_CTLR_DF is defined and CONFIG_SOC_SERIES_BSIM_NRFXX
is not definded.
Thanks to that any other platform is not affected. The file will not
build if there is no appropriate configuration or there are missing
features in a hardwared.
Unit tests have provided stub imlpementation or radio functionality.
If nrf52_bsim has implemented Direction Finding Extension, the
DF unit tests code will stil work and will not require additional
changes. Also content of the file is not affected by contional
compilation entries.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add some error condition of testcases to verify whether the
robustness of API. Such as give a NULL to some API and check
the response if get result that we were expacted.
Signed-off-by: Jian Kang <jianx.kang@intel.com>
