Adding just the cache flush function for x86. The name
arch_cache_flush comply with API names in include/cache.h
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
The p_memsz field which indicates the size of a segment in memory
isn't always a multiple of 8. Remove the assert and add padding if
necessary. Without this change it's not possible to generate EFI
binaries out of all samples & tests in the tree.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Zephyr applications will always use the VTOR register when it is
available on the CPU and the register will always be configured
to point to applications vector table during startup.
SW_VECTOR_RELAY_CLIENT is meant to be used only on baseline ARM cores.
SW_VECTOR_RELAY is intended to be used only by the bootloader.
The bootloader may configure the VTOR to point to the relay table
right before chain-loading the application.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Select either SW_VECTOR_RELAY or SW_VECTOR_RELAY_CLIENT
at the time.
Removed #ifdef-ry in irq_relay.S as SW_VECTOR_RELAY was
refined so it became reserved for the bootloader and it
conditionally includes irq_relay.S for compilation.
See SHA #fde3116f1981cf152aadc2266c66f8687ea9f764
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
This patch allows the `SW_VECTOR_RELAY` and
`SW_VECTOR_RELAY_CLIENT` pair to be
enabled on the ARMv7-M and ARMv8-M architectures
and covers all additional interrupt vectors.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The optional SOC_CONTEXT carries processor state registers that need to
be initialized properly to avoid uninitialized memory read as processor
state.
In particular on the RV32M1 the extra soc context stores a state for
special loop instructions, and loading non zero values will have the
core assume it is in a loop.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
The `TEXT_SECTION_OFFSET` symbol is used to specify the offset between
the beginning of the ROM area and the address of the first ROM section.
This commit renames `TEXT_SECTION_OFFSET` to `ROM_START_OFFSET` because
the first ROM section is not always the `.text` section.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The page table initialization needs a populated PCI MMIO
configuration, and that is lazy-evaluated. We aren't guaranteed that
a driver already hit that path, so be sure to call it explicitly.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The firmware on existing devices uses HPET timer zero for its own
purposes, and leaves it alive with interrupts enabled. The Zephyr
driver now knows how to recover from this state with fuller
initialization, but that's not enough to fix the inherent race:
The timer can fire BEFORE the driver initialization happens (and does,
with certain versions of the EFI shell), thus flagging an interrupt to
what Zephyr sees as a garbage vector. The OS can't fix this on its
own, the EFI bootloader (which is running with interrupts enabled as
part of the EFI environment) has to do it. Here we can know that our
setting got there in time and didn't result in a stale interrupt flag
in the APIC waiting to blow up when interrupts get enabled.
Note: this is really just a workaround. It assumes the hardware has
an HPET with a standard address. Ideally we'd be able to build zefi
using Zephyr kconfig and devicetree values and predicate the HPET
reset on the correct configuraiton.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Right now x86_64 doesn't install handlers for vectors that aren't
populated by Zephyr code. Add a tiny spurious interrupt handler that
logs the error and triggers a fatal error, like other platforms do.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This patch is almost entirely aesthetics, designed to isolate the
variant configurations to a simple macro API (just IN/OUT), reduce
complexity derived from code pasted out of the larger ns16550 driver,
and keep the complexity out of the (very simple!) core code. Useful
when hacking on the driver in contexts where it isn't working yet.
The sole behavioral change here is that I've removed the runtime
printk hook installation in favor of defining an
arch_printk_char_out() function which overrides the weak-linked
default (that is, we don't need to install a hook, we can be the
default hook at startup).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Various cleanups to the x86 early serial driver, mostly with the goal
of simplifying its deployment during board bringup (which is really
the only reason it exists in the first place):
+ Configure it =y by default. While there are surely constrained
environments that will want to disable it, this is a TINY driver,
and it serves a very important role for niche tasks. It should be
built always to make sure it works everywhere.
+ Decouple from devicetree as much as possible. This code HAS to work
during board bringup, often with configurations cribbed from other
machines, before proper configuration gets written. Experimentally,
devicetree errors tend to be easy to make, and without a working
console impossible to diagnose. Specify the device via integer
constants in soc.h (in the case of IOPORT access, we already had
such a symbol) so that the path from what the developer intends to
what the code executes is as short and obvious as possible.
Unfortunately I'm not allowed to remove devicetree entirely here,
but at least a developer adding a new platform will be able to
override it in an obvious way instead of banging blindly on the
other side of a DTS compiler.
+ Don't try to probe the PCI device by ID to "verify". While this
sounds like a good idea, in practice it's just an extra thing to get
wrong. If we bail on our early console because someone (yes, that's
me) got the bus/device/function right but typoed the VID/DID
numbers, we're doing no one any favors.
+ Remove the word-sized-I/O feature. This is a x86 driver for a PCI
device. No known PC hardware requires that UART register access be
done in dword units (in fact doing so would be a violation of the
PCI specifciation as I understand it). It looks to have been cut
and pasted from the ns16550 driver, remove.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The default page table (the architecturally required one used for
entrance to long mode, before the OS page tables get assembled) was
mapping the first 4G of memory.
Extend this to 512G by fully populating the second level page table.
We have devices now (up_squared) which have real RAM mapped above 4G.
There's really no good reason not to do this, the page is present
always anyway.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
A last minute "cleanup" to the EFI startup path (on a system where I
had SMP disabled) moved the load of the x86_cpuboot[0] entry into RBP
into the main startup code, which is wrong because on auxiliary CPUs
that's already set up by the 16/32 bit entry code to point to the
OTHER entries.
Put it back where it belongs.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
* The stack pointer (SP) register points to the lowest-used address of
a downward-growing stack, so memory address [sp] is used, we can't
modify it.
* In firq_no_switch case, we need to pop sp, which pushed before
_isr_demux function in firq_nest function.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Define vector relay tables for bootloader only.
If an image is not a bootloader image (such as an MCUboot image)
but it is a standard Zephyr firmware, chain-loadable by a
bootloader, then this image will not need to relay IRQs itself.
In this case SW_VECTOR_RELAY_CLIENT should be used to setting the
vector table pointer in RAM so the parent image can forward the
interrupts to it.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Co-authored-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This is a first cut on a tool that will convert a built Zephyr ELF
file into an EFI applciation suitable for launching directly from the
firmware of a UEFI-capable device, without the need for an external
bootloader.
It works by including the Zephyr sections into the EFI binary as
blobs, then copying them into place on startup.
Currently, it is not integrated in the build. Right now you have to
build an image for your target (up_squared has been tested) and then
pass the resulting zephyr.elf file as an argument to the
arch/x86/zefi/zefi.py script. It will produce a "zephyr.efi" file in
the current directory.
This involved a little surgery in x86_64 to copy over some setup that
was previously being done in 32 bit mode to a new EFI entry point.
There is no support for 32 bit UEFI targets for toolchain reasons.
See the README for more details.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The traditional IO Port configuration mechanism was technically
deprecated about 15 years ago when PCI Express started shipping.
While frankly the MMIO support is significantly more complicated and
no more performant in practice, Zephyr should have support for current
standards. And (particularly complicated) devices do exist in the
wild whose extended capability pointers spill beyond the 256 byte area
allowed by the legacy mechanism. Zephyr will want drivers for those
some day.
Also, Windows and Linux use MMIO access, which means that's what
system vendors validate.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The existing minimal ACPI implementation was enough to find the MADT
table for dumping CPU info. Enhance it with a slightly less minimal
implementation that can fetch any table, supports the ACPI 2.0 XSDT
directory (technically required on 64 bit systems so tables can live
>4G) and provides definitions for the MCFG table with the PCI
configuration pointers.
Note that there is no use case right now for high performance table
searching, so the "init" step has been removed and tables are probed
independently from scratch for each one requested (there are only
two).
Note also that the memory to which these tables point is not
understood by the Zephyr MMU configuration, so in long mode all ACPI
calls have to be done very early, before z_x86_paging_init() (or on a
build with the MMU initialization disabled).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
If we get a page fault in early boot context, before
main thread is started, page faults were being
incorrectly reported as stack overflows.
z_x86_check_stack_bounds() needs to consider the
interrupt stack as the correct stack for this context.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Previously, DTS specification of physical RAM bounds did not
correspond to the actual bounds of system RAM as the first
megabyte was being skipped.
There were reasons for this - the first 1MB on PC-like systems
is a no-man's-land of reserved memory regions, but we need DTS
to accurately capture physical memory bounds.
Instead, we introduce a config option which can apply an offset
to the beginning of physical memory, and apply this to the "RAM"
region defined in the linker scripts.
This also fixes a problem where an extra megabyte was being
added to the size of system RAM.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Create macro for TCR_PS_BITS instead of programmatically looking up
a static value based on a CONFIG option. Moving to macro
removes logically dead code reported by Coverity static analysis tool.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
This helps distingush between fatal errors if logging isn't
enabled.
As detailed in comments, pass a reason code which controls
the QEMU process' return value.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
x86_64's __resume path 'poisons' the incoming thread's
saved RIP value with a special 0xB9 value, to catch
re-use of thread objects across CPUs in SMP. Add a check
and printout for this when handling fatal errors, and
treat as a kernel panic.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The ESF contains register file contents including program
counter when the exception happened. If non-NULL and we
have ARC_EXCEPTION_DEBUG enabled, dump its contents to the
log stream.
Other arches do this already.
There is no need to read ERET, the ESF already contains the
interrupted PC value.
A future enhancement could create an option to additionally
push callee-saved register context into the ESF so it can
also be dumped out, but this patch does not address this.
A future enhancement could also convert the syscall
stack frame pointer passed to arch_syscall_oops() into
an ESF so that context of the failed system call can be
inferred.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The workaround for ARMv7-M architecture (which proactively
decreases the available thread stack by the size of the MPU
guard) needs to be placed before we calculate the pointer of
the user-space local thread data, otherwise this pointer will
fall beyond the boundary of the thread stack area.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We fix (by inverting) the logic of the IS_MPU_GUARD_VIOLATION
macro, with respect to the value of the supplied 'fault_addr'.
We shall only be inspecting the fault_addr value if it is not
set to -EINVAL.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
It is possible that MMFAR address is not written by the
Cortex-M core; this occurs when the stacking error is
not accompanied by a data access violation error (i.e.
when stack overflows due to the exception entry frame
stacking): z_check_thread_stack_fail() shall be able to
handle the case of 'mmfar' holding the -EINVAL value.
Add this node in mem_manage_fault() function to clarify
that it is valid for z_check_thread_stack_fail() to be
called with invalid mmfar address value.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Because the issue of nsim, the sleep instruction doest not work
correctly when SMP is enabled. A workaround is introduced in commit
d56a12d955, this workaround should be enabled only for SMP case in
nsim.
For other cases, no need of this workaround.
This commit fixes#24276
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
If KPTI is not enabled, the current value of CR3 is the correct
page tables when the exception happened in all cases.
If KPTI is enabled, and the excepting thread was in user mode,
then a page table switch happened and the current value of CR3
is not the page tables when the fault happened. Get it out of the
thread object instead.
Fixes two problems:
- Divergent exception loop if we crash when _current is a dummy
thread or its page table pointer stored in the thread object is
NULL or uninitialized
- Printing the wrong CR3 value on exceptions from user mode in
the register dump
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In one of the ASSERT() statement, the PHYS_RAM_ADDR (alias
of DT_REG_ADDR()) may be interpreted by the compiler as
long long int when it's large than 0x7FFFFFFF, but is
paired with %x, resulting in compiler warning. Fix this
by type casting it to uintptr_t and use %lx instead.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
On x86_64, the arch_timing_* variables are not set which
results in incorrect values being used in the timing_info
benchmarks. So instrument the code for those values.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The SoCs usually have devices that are accessed through MMIO.
This requires the corresponding regions to be marked readable
and writable in the MMU or else accesses will result in page
faults.
This adds a function which can be implemented in the SoC code to
specify those pages to be added to MMU.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The integers used for pointer calculation were u32_t.
Change them to uintptr_t to be compatible with 64-bit.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
x86-32 thread objects require special alignment since they
contain a buffer that is passed to fxsave/fxrstor instructions.
This fell over if the dummy thread is created in a stack frame.
Implement a custom swap to main for x86 which still uses a
dummy thread, but in an unused part of the interrupt stack
with proper alignment.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This change enables specific compiler and linker options to be used in
the case that an arch/posix/os.arch.cmake file exists.
Note: os and arch in the above case are evaluations of
CMAKE_HOST_SYSTEM_NAME and CMAKE_HOST_SYSTEM_PROCESSOR.
Otherwise, the existing "generic" compiler and linker flags in
arch/posix/CMakeLists.txt are used.
Additional flags and checks are provided in
arch/posix/Linux.aarch64.cmake.
Added scripts/user_wordsize.py to detect if userspace is 64-bit or
32-bit, which should be consistent with the value of CONFIG_64BIT
for Aarch64 on Linux.
Fixes#24842
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
If IO APIC is in logical destination mode, local APICs compare their
logical APIC ID defined in LDR (Logical Destination Register) with
the destination code sent with the interrupt to determine whether or not
to accept the incoming interrupt.
This patch programs LDR in xAPIC mode to support IO APIC logical mode.
The local APIC ID from local APIC ID register can't be used as the
'logical APIC ID' because LAPIC ID may not be consecutive numbers hence
it makes it impossible for LDR to encode 8 IDs within 8 bits.
This patch chooses 0 for BSP, and for APs, cpu_number which is the index
to x86_cpuboot[], which ultimately assigned in z_smp_init[].
Signed-off-by: Zide Chen <zide.chen@intel.com>
Some wires were crossed when an older PR was merged that
had build conflicts with newer code. Update this header
to reflect were the 'nested' member is in the kernel CPU
struct.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit renames the x86 Kconfig `CONFIG_{EAGER,LAZY}_FP_SHARING`
symbol to `CONFIG_{EAGER,LAZY}_FPU_SHARING`, in order to align with the
recent `CONFIG_FP_SHARING` to `CONFIG_FPU_SHARING` renaming.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit renames the Kconfig `FP_SHARING` symbol to `FPU_SHARING`,
since this symbol specifically refers to the hardware FPU sharing
support by means of FPU context preservation, and the "FP" prefix is
not fully descriptive of that; leaving room for ambiguity.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This expands the early_serial to support MMIO UART, in addition to
port I/O, by duplicating part of the hardware initialization from
the NS16550 UART driver. This allows enabling of early console on
hardware with MMIO-based UARTs.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
ARC_MPU_VER 2 has a strong requirement in
* size, must be >= 2048 bytes and power of 2
* start address must be aligned to size
It may bring a big waste of memory.
On the other hand, GEN_PRIV_STACK is used for ARC_MPU_VER 2,
it conflicts with MPU_STACK_GUARD.
So considering the limmitations, remove MPU_STACK_GUARD for
ARC_MPU_VER 2
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Because ARC MPUv3 doesn't have a strong alignment requirement
as ARC MPUv2 does, no use of GEN_PRIV_STACK for it.
Without GEN_PRIV_STACK, all stack elements can be in one stack object.
See #24048.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
drop the original C macro based allocation of privilged stack as
it may cause the waste of memory for ARC MPUv2.
now use the way of GEN_PRIV_STACK to generate privilege stack as
other archs did, e.g. ARM.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
x86_64 supports 4 levels of interrupt nesting, with
the interrupt stack divided up into sub-stacks for
each nesting level.
Unfortunately, the initial interrupt stack pointer
on the first CPU was not taking into account reserved
space for guard areas, causing a stack overflow exception
when attempting to use the last interrupt nesting level,
as that page had been set up as a stack guard.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We need to lock interrupts before setting the thread's
stack pointer to the trampoline stack. Otherwise, we
could unexpectedly take an interrupt on this stack
instead of the thread stack as intended.
The specific problem happens at the end of the interrupt,
when we switch back to the thread stack and call swap.
Doing this on a per-cpu trampoline stack instead of the
thread stack causes data corruption.
Fixes: #24869
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit cleans up the section name definitions in the linker
sections header file (`include/linker/sections.h`) to have the uniform
format of `_(SECTION)_SECTION_NAME`.
In addition, the scope of the short section reference aliases (e.g.
`TEXT`, `DATA`, `BSS`) are now limited to the ASM code, as they are
currently used (and intended to be used) only by the ASM code to
specify the target section for functions and variables, and these short
names can cause name conflicts with the symbols used in the C code.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Replace DT_PHYS_RAM_ADDR and DT_RAM_SIZE with DT_REG_ADDR/DT_REG_SIZE
for the DT_CHOSEN(zephyr_sram) node.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This implements a file descriptor used for event notification that
behaves like the eventfd in Linux.
The eventfd supports nonblocking operation by setting the EFD_NONBLOCK
flag and semaphore operation by settings the EFD_SEMAPHORE flag.
The major use case for this is when using poll() and the sockets that
you poll are dynamic. When a new socket needs to be added to the poll,
there must be some way to wake the thread and update the pollfds before
calling poll again. One way to solve it is to have a timeout set in the
poll call and only update the pollfds during a timeout but that is not
a very nice solution. By instead including an eventfd in the pollfds,
it is possible to wake the polling thread by simply writing to the
eventfd.
Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>
This commit reworks the symbol descriptions for `CONFIG_FPU` and
`CONFIG_FP_SHARING`, in order to provide more details and clarify any
ambiguity between the two symbols.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit renames the Kconfig `FLOAT` symbol to `FPU`, since this
symbol only indicates that the hardware Floating Point Unit (FPU) is
used and does not imply and/or indicate the general availability of
toolchain-level floating point support (i.e. this symbol is not
selected when building for an FPU-less platform that supports floating
point operations through the toolchain-provided software floating point
library).
Moreover, given that the symbol that indicates the availability of FPU
is named `CPU_HAS_FPU`, it only makes sense to use "FPU" in the name of
the symbol that enables the FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Adds handling of the FLOAT_64BIT option when determining the ISA
flags as well as introduces a new Kconfig option to enable/disable
the hard-float calling convention.
Signed-off-by: Corey Wharton <coreyw7@fb.com>
This change adds full shared floating point support for the RISCV
architecture with minimal impact on threads with floating point
support not enabled.
Signed-off-by: Corey Wharton <coreyw7@fb.com>
This operation is formally defined as rounding down a potential
stack pointer value to meet CPU and ABI requirments.
This was previously defined ad-hoc as STACK_ROUND_DOWN().
A new architecture constant ARCH_STACK_PTR_ALIGN is added.
Z_STACK_PTR_ALIGN() is defined in terms of it. This used to
be inconsistently specified as STACK_ALIGN or STACK_PTR_ALIGN;
in the latter case, STACK_ALIGN meant something else, typically
a required alignment for the base of a stack buffer.
STACK_ROUND_UP() only used in practice by Risc-V, delete
elsewhere.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The core kernel z_setup_new_thread() calls into arch_new_thread(),
which calls back into the core kernel via z_new_thread_init().
Move everything that doesn't have to be in z_new_thread_init() to
z_setup_new_thread() and convert to an inline function.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit reworks the ARM AArch32 non-Cortex-M (i.e. Cortex-A and
Cortex-R) exception handling to establish the base exception handling
framework and support detailed exception information reporting.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
In the ARM Cortex-M architecture implementation, the concepts of
"exceptions" and "interrupts" are interchangeable; whereas, in the
Cortex-A/-R architecture implementation, they are considered separate
and therefore handled differently (i.e. `z_arm_exc_exit` cannot be used
to exit an "interrupt").
This commit fixes all `z_arm_exc_exit` usages in the interrupt handlers
to use `z_arm_int_exit`.
NOTE: In terms of the ARM AArch32 Cortex-A and Cortex-R architecture
implementations, the "exceptions" refer to the "Undefined
Instruction (UNDEF)" and "Prefetch/Data Abort (PABT/DABT)"
exceptions, while "interrupts" refer to the "Interrupt (IRQ)",
"Fast Interrupt (FIQ)" and "Software Interrupt/Supervisor Call
(SWI/SVC)".
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The exception/fault handling mechanisms for the ARM Cortex-M and the
rest (i.e. Cortex-A and Cortex-R) are significantly different and there
is no benefit in having the two implementations in the same file.
This commit relocates the Cortex-M fault handler to
`cortex_m/fault_s.S` and the Cortex-A/-R generic exception handler to
`cortex_a_r/exc.S` (note that the Cortex-A and Cortex-R architectures
do not provide direct fault vectors; instead, they provide the
exception vectors that can be used to handle faults).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The amount of shared code in exc_exit.S between the ARM Cortex-M and
the rest (i.e. Cortex-A and Cortex-R) is minimal and there is little
benefit in having the two implementations in the same file.
This commit splits the interrupt/exception exit code for the
Cortex-A/-R and Cortex-M into separate files to improve readability as
well as maintainability.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Use calee saved register to preserve value accoss sequence.
Procedure calls are mandated to follow ABI spec and preserve
x19 to x29.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
Zephyr being an OS is typically expected to run at EL1. Arm core
can reset to EL3 which typically requires a firmware to run at EL3
and drop control to lower EL. In that case EL3 init is done by the
firmware allowing the lower EL software to have necessary control.
If Zephyr is entered at EL3 and it is desired to run at EL1, which
is indicated by 'CONFIG_SWITCH_TO_EL1', then Zephyr is responsible
for doing required EL3 initializations to allow lower EL necessary
control.
The entry sequence is modified to have control flow under single
'switch_el'.
Provisions added by giving weak funcions to do platform specific
init from EL3.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
Single mov instruction can not be used to move non-zero
64b immediate value to the 64b register.
Implement macro to generate mov/ movk and movz sequences
depending on immediate value width.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
Random readability improvements:
- avoid a stack trace on error by using sys.exit()
- include "error:" in the error() output, for grep
- print conflicting addresses on multiple IRQ registration
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
To remove the need to have DT_NUM_IRQ_PRIO_BITS defined in every
dts_fixup.h we can just handle the few variant cases in irq.h. This
allows us to remove DT_NUM_MPU_REGIONS from all the dts_fixup.h files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To remove the need to have DT_NUM_MPU_REGIONS defined in every
dts_fixup.h we can just handle the few variant cases in arm_mpu.c
directly. This allows us to remove DT_NUM_MPU_REGIONS from all the
dts_fixup.h files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The current implementation to preserve r0 and r3 registers around the
call to `read_timer_end_of_isr` function has the following problems:
1. STM and LDM mnemonics are used without proper suffixes, in attempt
to implement PUSH and POP (i.e. STMFD and LDMFD). The suffix-less
STM mnemonic is equivalent to STMEA (increment after), which clearly
is not a PUSH operation, and this corrupts the interrupt stack,
leading to crashes on the Cortex-R.
2. The current implementation unnecessarily preserves additional r1, r2
and lr registers. There is no need to preserve r1 and r2 because the
values contained in these registers are not used after the function
call; as for the lr register, it is already pushed to the stack when
the interrupt service routine enters.
This commit removes all the unnecessary register preservations and
fixes the incorrect STM and LDM usages.
Note that the PUSH and POP aliases are used in place of the STMFD and
LDMFD mnemonics because they are used throughout the rest of the code.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Currently, the Cortex-M SysTick-based timing info implementation is
incorrectly specified for all 32-bit ARM architectures.
This commit fixes that by restricting the SysTick-based implementation
to the ARM Cortex-M architectures only; in addition, it removes the
ARM64 timing info implementation as it is identical to the default
generic implementation and was previously added only as a workaround
for the aforementioned problem.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The selection of the Cortex M systick driver to be used as a system
clock driver is controlled by CONFIG_CORTEX_M_SYSTICK.
To replace it by another driver CONFIG_CORTEX_M_SYSTICK must be set
to 'n'. Unfortunately this also controls the interrupt vector for
the systick interrupt. It is now routed to z_arm_exc_spurious.
Remove the dependecy on CONFIG_CORTEX_M_SYSTICK and route to
z_clock_isr as it was before #24012.
Fixes#24347
Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com>
The ARM architecture root directory contains `aarch32.cmake` and
`aarch64.cmake` files whose contents are better suited to go into other
more purpose-specific files.
This commit removes the aforementioned files and moves their contents
to other files following the convention used by other architectures.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the GCC `-march` flag for the ARM Cortex-R5 targets.
Note that `armv7-r+idiv` must be specified instead of `armv7-r`,
because the GCC internally resolves `-mcpu=cortex-r5` to it.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This is a minor clean-up for the ARM architecture configurations.
Note that the `CPU_CORTEX_A` symbol is moved from the AArch64 to the
ARM root Kconfig because it can be selected from both AArch32 and
AArch64.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This bug is brought in commit 3f88ddd54999.
The cleanup of IRQ_ACT.U bit before thread switch is not done.
The bug comes out at the case where interrupt comes in user mode,
then a thread switch happens, and the target thread is to run in kernel
mode. Because the U bit is not sync up correctly, the stack operation
is wrong.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Those are used only in tests, so remove them from kernel Kconfig and set
them in the tests that use them directly.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In arch_irq_connect_dynamic the 'level' variable is only used on
platforms that define CONFIG_RISCV_HAS_PLIC. For the other platforms
we'll get a warning about an unused variable. Remove the need for
'level' and just call irq_get_level() where its needed to address the
issue.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix documentation in kernel_arch_data.h and kernel_arch_func.h
headers for ARM, to indicate that these are common headers for
all ARM architecture variants.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
z_isr_install is not suited to handle multi-level interrupt formats.
This update allows z_isr_install to accept irq numbers in zephyr format
and place them in the isr table appropriately.
Fixes issue #22145
Signed-off-by: Jaron Kelleher <jkelleher@fb.com>
This moves enabling XTENSA_HAL to the SoC definitions.
As Xtensa SoCs are highly configurable, it is possible
that the generic Xtensa HAL provided in the tree is
not suitable. So only enable XTENSA_HAL only if
the generic version can be used.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
In the Cortex-M exception table we rename z_arm_reserved()
function to z_arm_exc_spurious(), as it is invoked when
existing (that is, non-reserved) but un-installed exceptions
are triggered, accidentaly, by software, or hardware. This
currently applies to SysTick and SecureFault exceptions.
Since fault.S is shared between Cortex-M and other AARCH32
architectures, we keep z_arm_reserved as a defined symbol
there. This commit does some additional, minor, "no-op"
cleanup in #ifdef's for Cortex-M and Cortex-R.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
If the Cortex-M core does not implement the Security Extension,
we should not be adding z_arm_reserved in the corresponding
vector table entry. That is because the entry is reserved by
the ARM architecture.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
If the Cortex-M core does not implement the SysTick peripheral,
we should not be adding z_arm_reserved in the corresponding
vector table entry. If we do have SysTick implemented but we
are not using it as the system timer, we shall install the
reserved interrupt at the vector table entry.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Write 0x0 instead of z_arm_reserved to vector exception
entries that are always reserved for future use by the
ARM architecture. These vector table entries cannot be
fetched to be executed by the Cortex-M exception entry,
so having z_arm_reserved gives a false impression, since
it is a function that may be invoked in the code. This
modification is safe since these vector entries are also
not supposed to be read / written by the code.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The mabi and march options of the compiler and linker commands
were previously hardcoded and depended only on the 64BIT config
option. This update allows these flags to be set by the config
options currently available, plus an additional option to
specify the compressed ISA.
Signed-off-by: Jaron Kelleher <jkelleher@fb.com>
When SMP is enabled, the irq_lock/unlock will get and
release a global spin lock, but the codes changed in this
commit only need to lock the local cpu. No affect on
uniprocessor, but optimizations for SMP case.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* add interrupt lock in low level API to gurantee the
correctness of operations.
* make some functions as in-line functions
* clean up and optimize the code comments
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Now that all posix boards have a dts we can move the selection of
HAS_DTS to the arch level like it is for all the other architectures.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The current context preservation implementation saves the spsr and
lr_irq registers, which contain the cpsr and pc register values of the
interrupted context, in the thread callee-saved block and this prevents
nesting of interrupts because these values are required to be part of
the exception stack frame to preserve the nested interrupt context.
This commit reworks the AArch32 non-Cortex-M context preservation
implementation to save the spsr and lr_irq registers in the exception
stack frame to allow preservation of the nested interrupt context as
well as the interrupted thread context.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The timer counter for ticks on MEC1501 SoC is based on the RTOS
timer which runs at 32kHz. This is too slow for timing benchmarks
as most cases can be finished within one or two ticks. Since
the SoC has higher frequency timers running at 48MHz, add
the necessary bits to use these for timing benchmarks.
Fix#23414
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
In the current implementation both SPSR and ELR registers are saved with
the callee-saved registers and restored by the context-switch routine.
To support nested IRQs we have to save those on the stack when entering
and exiting from an ISR.
Since the values are now carried on the stack we can now add those to
the ESF and the initial stack and take care to restore them for new
threads using the new thread wrapper routine.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The current `z_isr_install` implementation asserts that the IRQ to
which the ISR will be installed must be disabled.
This commit disables that assertion for the ARM GIC because the SGI-
type IRQs can never be disabled as per the specifications and this
causes the assertion to fail for them.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Out-of-tree code can still be using the old file locations. Introduce
header shims to include the headers from the new correct location and
print a warning message.
These shims should be removed after two releases.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit renames the `cortex_r` directory under the AArch32 to
`cortex_a_r`, in preparation for the AArch32 Cortex-A support.
The rationale for this renaming is that the Cortex-A and Cortex-R share
the same base design and the difference between them, other than the
MPU vs. MMU, is minimal.
Since most of the architecture port code and configurations will be
shared between the Cortex-A and Cortex-R architectures, it is
advantageous to have them together in the same directory.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit re-organises AArch32 configurations for consistency.
1. Move Cortex-M-specific includes to `cortex_m/Kconfig`.
2. Relocate the "TrustZone" configurations to `cortex_m/tz/Kconfig`
since these are really the TrustZone-M configurations and do not
apply to the TrustZone-A.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Under multi-processing, only the first CPU#0 needs to go through
setting up the kernel structs and clearing out BSS (among others).
There is no need for other CPUs to do those tasks. Since each
Xtensa core starts using the same boot vector, CPUs other than #0
need to skip all the startup tasks by not calling to z_cstart().
So provide another entry point for those CPUs. Note that Xtensa
arch is highly configurable. So the implementation of the entry
point is up to each individual SoC config.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Under SMP, the main BSS section only needs to be zero-ed on CPU #0.
Other CPUs should not zero out BSS, or else it may cause CPU #0 to
crash on invalid data.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Rewrite the comments for the swap routine removing the references to the
old aarch32 code and rename z_arm64_pendsv() ->
z_arm64_context_switch().
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Rework the assembly code for the ISR wrapper and SVC to share the
entry/exit code that is currently scattered amoung several files /
places. No functional changes.
Rename also macro.h -> macro.inc to fool the CI.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
z_CpuIdleInit has been renamed to z_arm_cpu_idle_init, so
we need to correct that function's name in the documentation
of arch_cpu_atomic_idle.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds the required memory barriers to the `arch_cpu_idle`
function in order to ensure proper idle operation in all cases.
1. Add ISB after setting BASEPRI to ensure that the new wake-up
interrupt priority is visible to the WFI instruction.
2. Add DSB before WFI to ensure that all memory transactions are
completed before going to sleep.
3. Add ISB after CPSIE to ensure that the pending wake-up interrupt
is serviced immediately.
Co-authored-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The current AArch32 `arch_cpu_idle` implementation enables interrupt
before executing the WFI instruction, and this has the side effect of
allowing interruption and thereby calling wake-up notification
functions before the CPU enters sleep.
This commit fixes the problem described above by ensuring that
interrupt is disabled when the WFI instruction is executed and
re-enabled only after the processor wakes up.
For ARMv6-M, ARMv8-M Baseline and ARM-R, the PRIMASK (ARM-M)/
CPSR.I (ARM-R) is used to lock interrupts and therefore it is not
necessary to do anything before executing the WFI instruction.
For ARMv7-M and ARMv8-M Mainline, the BASEPRI is used to lock
interrupts and the PRIMASK is always cleared in non-interrupt context;
therefore, it is necessary to set the PRIMASK to mask interrupts,
before clearing the BASEPRI to configure wake-up interrupt priority to
the lowest.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This never needed to be put in a separate gperf table.
Privilege mode stacks can be generated by the main
gen_kobject_list.py logic, which we do here.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The nRF53 has different region size than nRF91.
This patch is aware of Erratum 19 (wrong SPU region size).
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
The set of interrupt stacks is now expressed as an array. We
also define the idle threads and their associated stacks this
way. This allows for iteration in cases where we have multiple
CPUs.
There is now a centralized declaration in kernel_internal.h.
On uniprocessor systems, z_interrupt_stacks has one element
and can be used in the same way as _interrupt_stack.
The IRQ stack for CPU 0 is now set in init.c instead of in
arch code.
The extern definition of the main thread stack is now removed,
this doesn't need to be in a header.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
z_arm_exc_exit (z_arm_int_exit) requires the current execution mode to
be specified as a parameter (through r0). This is not necessary because
this value can be directly read from CPSR.
This commit modifies the exception return function to retrieve the
current execution mode from CPSR and removes all provisions for passing
the execution mode parameter.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Change to code to use the automatically generated DT_INST_*
defines and remove the now unneeded configs and fixups.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
The existing isr_tables implementation does not allow enabling only
hardware interrupt vector table without software isr table.
This commit ensures that CONFIG_GEN_IRQ_VECTOR_TABLE can be used
without setting CONFIG_GEN_SW_ISR_TABLE.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The current AArch64 interrupt system relies on the multi-level
interrupt mechanism and the `irq_nextlevel` public interface to invoke
the Generic Interrupt Controller (GIC) driver functions.
Since the GIC driver has been refactored to provide a direct interface,
in order to resolve various implementation issues described in the GIC
driver refactoring commit, the architecture interrupt control functions
are updated to directly invoke the GIC driver functions.
This commit also adds support for the ARMv8 cores (e.g. Cortex-A53)
that allow interfacing to a custom external interrupt controller
(i.e. non-GIC) by mapping the architecture interrupt control functions
to the SoC layer interrupt control functions when
`ARM_CUSTOM_INTERRUPT_CONTROLLER` configuration is enabled.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The current AArch32 (Cortex-R and to-be-added Cortex-A) interrupt
system relies on the multi-level interrupt mechanism and the
`irq_nextlevel` public interface to invoke the Generic Interrupt
Controller (GIC) driver functions.
Since the GIC driver has been refactored to provide a direct interface,
in order to resolve various implementation issues described in the GIC
driver refactoring commit, the architecture interrupt control functions
are updated to directly invoke the GIC driver functions.
This commit also adds support for the Cortex-R cores (Cortex-R4 and R5)
that allow interfacing to a custom external interrupt controller
(i.e. non-GIC) by introducing the `ARM_CUSTOM_INTERRUPT_CONTROLLER`
configuration that maps the architecture interrupt control functions to
the SoC layer interrupt control functions.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
We rename the z_arm_int_lib_init() function to
z_arm_interrupt_init(), aligning to how other
ARCHes name their IRQ initialization function.
There is nothing about 'library' in this
functionality, so we remove the 'lib' in-fix.
The commit does not introduce any behavior changes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
the old codes just work for single core, we need to consider
the case of SMP.
In SMP, it's not easy to get current thread of current cpu in
assembly, so we'd better do it in C.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* update comments to match latest codes
* add extra comments for some assembly, macros
* use macro to replace duplcated codes
* remove unused codes, lables, symobols
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
overhaul the thread switch code in epilogue of irq and
exception handling:
* add z_arch_get_next_switch_handle to call z_get_next_switch_handle,
let the scheduler to decide the switch thread. This will also cover
the case of SMP.
* put lots of common codes in macros for thread switch to improve
the maintainablity, readability.
* clean up of some lables to make codes easier to understand
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
for smp target, there is a case where just one core is running, then:
* during init, the master core will run, others cores will halt/sleep
* use timer driver for single core
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
We align the implementation of z_irq_spurious() handler
with the other Zephyr ARCHEs, i.e. we will be calling
directly the ARM-specific fatal error function with
K_ERR_SPURIOUS_IRQ as the error type. This is already
the case for aarch64.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Correct documentation note in z_irq_spurious() definition,
stressing that the function is installed in _sw_isr_table
entries at boot time (which may be or not be used for
dynamic interrupts).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The ARMv7-R architecture supports both Thumb-2 (T32) and ARM (A32)
instruction sets.
This commit selects the `ISA_THUMB2` symbol to indicate that the
ARMv7-R architecture supports the Thumb-2 instruction set, which can
be enabled by selecting the `COMPILER_ISA_THUMB2` symbol.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit introduces the `COMPILER_ISA_THUMB2` symbol to allow
choosing either the ARM or Thumb instruction set for C code
compilation.
In addition, this commit introduces the `ASSEMBLER_ISA_THUMB2` helper
symbol to specify the default target instruction set for the assembler.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
when MPU_GAP_FILLING is configured, the default mpu entry
(kernel read + kernel write) will be used to fill the gaps
among mpu entires to avoid dynamic mpu region splitting.
This will bring better performance in thread switch but fewer
constraints on privileged codes.
when MPU_GAP_FILLING is not configured, a sw-based mpu dynamic
region splitting is used to bypass the limitation of no mpu region
overlap in hardware. This approach will consume more hardware
mpu entries and more time in thread switch.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
arc mpu ver3 does not allow mpu region overlap, so need to enable
MPU_REQUIRES_NON_OVERLAPPING_REGIONS.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
blt is signed comparsion, if r6 is a negative number created by
malicious code, it will pass the check, bring a secure risk.
use blo (unsinged comparison) to do the check.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This function is widely used by functions that validate memory
buffers. Macros used to check permissions, like Z_SYSCALL_MEMORY_READ
and Z_SYSCALL_MEMORY_WRITE, use these functions to check that a
pointers passed by user threads in a syscall.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
We need an unsigned comparison when evaluating whether
the supplied syscall ID is lower than the syscall ID limit.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The ARMv7-M MPU requires power-of-two alignment, not the ARMv8-M MPU, as
noted a few lines later.
Signed-off-by: Anders Montonen <Anders.Montonen@iki.fi>
Upon reset, the CONTROL.FPCA bit is, normally, cleared. However,
it might be left un-cleared by firmware running before Zephyr boot,
for example when Zephyr image is loaded by another image.
We must clear this bit to prevent errors in exception unstacking.
This caused stack offset when booting from a build-in EFM32GG bootloader
Fixes#22977
Signed-off-by: Luuk Bosma <l.bosma@interay.com>
Upon reset, the Co-Processor Access Control Register is, normally,
0x00000000. However, it might be left un-cleared by firmware running
before Zephyr boot.
This restores the register back to reset value, even if CONFIG_FLOAT
is not set.
Clearing before setting supports switching between Full access
and Privileged access only.
Refactor enable_floating_point to support initialize
floating point registers for every CPU that has a FPU.
Signed-off-by: Luuk Bosma <l.bosma@interay.com>
Xtensa uses two instructions to perform atomic compare-and-set
instruction: first the comparison register, then the actual
instruction to do compare-and-set. There is a potential that
context switching is performed before these two instructions.
A restored context may have the wrong value in the comparison
register. So we need to save and restore the comparison
register during context switching.
Fixes#21800
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add zephyr execution regions(text, rodata, data, noinit, bss, etc.)
with proper attributes to translation tables.
Linker script has been modified a little to align these sections to
minimum translation granule(4 kB).
With this in place, code cannot be overwritten accidently as it is
marked read only. Similarly, execution is prohibited from data/RW
section as it is marked execute-never.
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
Add MMU support for ARMv8A. We support 4kB translation granule.
Regions to be mapped with specific attributes are required to be
at least 4kB aligned and can be provided through platform file(soc.c).
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
We lock IRQs around writing to RNR and immediate reading of RBAR
RASR in ARMv7-M MPU driver. We do this for the functions invoked
directly or undirectly by arch_buffer_validate(). This locking
guarantees that
- arch_buffer_validate() calls by ISRs may safely preempt each
other
- arch_buffer_validate() calls by threads may safely preempt
each other (i.e via context switch -out and -in again).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When entering user mode, and before the privileged are dropped,
the thread switches back to using its default (user) stack. For
stack limit checking not to lead to a stack overflow, the PSPLIM
and PSP register updates need to be done with PendSV IRQ locked.
This is because context-switch (done in PendSV IRQ) reprograms
the stack pointer limit register based on the current PSP
of the thread. This commit enforces PendSV locking and
unlocking while reprogramming PSP and PSPLIM when switching to
user stack at z_arm_userspace_enter().
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Modifying the PSP via an MSR instruction is not subject to
stack limit checking so we can remove the relevant code
block in the begining of z_arm_userspace_enter(), which clears
PSPLIM. We add a comment when setting the PSP to the privilege
stack to stress that clearing the PSPLIM is not required and it
is always a safe operation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When returning from a system call, the thread switches back
to using its default (user) stack. For stack limit checking
not to lead to a stack overflow, the updates of PSPLIM and
PSP registers need to be done with PendSV IRQ locked. This
is because context-switch (done in PendSV IRQ) reprograms
the stack pointer limit register based on the current PSP
of the thread. This commit enforces PendSV locking and
unlocking while reprogramming PSP and PSPLIM when returning
from a system call.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In this commit we remove the PSPLIM clearing when entering
z_arm_do_syscall(), since we want PSPLIM to keep guarding
the user thread stack, until the thread has switched to its
privileged stack, for executing the system call.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Thread will be in privileged mode after returning from SCVall. It
will use the default (user) stack before switching to the privileged
stack to execute the system call. We need to protect the user stack
against stack overflows until this stack transition. We update the
note in z_arm_do_syscall(), stating clearly that it executing with
stack protection when building with stack limit checking support
(ARMv8-M only).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When configuring the built-in stack guard, via setting the
PSPLIM register, during thread context-switch, we shall only
set PSPLIM to "guard" the thread's privileged stack area when
the thread is actually using it (PSP is on this stack).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We do not need to have the PSPLIM clearing directly inside
the PendSV handler and outside the function that configures
it, configure_builtin_stack_guard(), since the latter is also
invoked inside the PendSV handler. This commit moves the
PSPLIM clearing inside configure_builtin_stack_guard(). The
patch is not introducing any behavioral change on the
stack limit checking mechanism for Cortex-M.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We add the mechanism to generate offset #defines for
thread stack info start, to be used directly in ASM.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We introduce a macro to define the IRQ priority level for
PendsV, and use it in arch/arm/include/aarch32/exc.h
to set the PendSV IRQ level. The commit does not change
the behavior of PendSV interrupt.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds some documentation for the exception
priority scheme for 32-bit ARM architecture variants.
In addition we document that SVCall priority level for
ARMv6-M is implicitly set to highest (by leaving it as
default).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
If IO APIC is in logical destination mode, local APICs compare their
logical APIC ID defined in LDR (Logical Destination Register) with
the destination code sent with the interrupt to determine whether or not
to accept the incoming interrupt.
This patch programs LDR in xAPIC mode to support IO APIC logical mode.
The local APIC ID from local APIC ID register can't be used as the
'logical APIC ID' because LAPIC ID may not be consecutive numbers hence
it makes it impossible for LDR to encode 8 IDs within 8 bits.
This patch chooses 0 for BSP, and for APs, cpu_number which is the index
to x86_cpuboot[], which ultimately assigned in z_smp_init[].
Signed-off-by: Zide Chen <zide.chen@intel.com>
* for COOP_SCHED case, i.e., PREEMPT_ENABLED is not enabled, the
idle thread will block other threads which is not correct.
* remove the check of PREEMPT_ENABLED in the epilogue of irq and
exception handling. Let the scheduler (should_preempt()) decide
whether the thread should be preempted.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Same deal as in commit eddd98f811 ("kconfig: Replace some single-symbol
'if's with 'depends on'"), for the remaining cases outside defconfig
files. See that commit for an explanation.
Will do the defconfigs separately in case there are any complaints
there.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
* remove irq lock/unlock which is not needed because of
the protection of offload_sem in irq_offload
* simplify the assembly codes related irq_offload, remove
the thread switch logic
* the old codes may do thread switch in the epilogue of
irq_offload handling with int locked, this is not correct
may cause irq_offload related codes crash.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This commit fixes incorrect Cortex-R interrupt lock, unlock and state
check function implementations.
The issues can be summarised as follows:
1. The current implementation of 'z_arch_irq_lock' returns the value
of CPSR as the IRQ key and, since CPSR contains many other state
bits, this caused 'z_arch_irq_unlocked' to return false even when
IRQ is unlocked. This problem is fixed by isolating only the I-bit
of CPSR and returning this value as the IRQ key, such that it
returns a non-zero value when interrupt is disabled.
2. The current implementation of 'z_arch_irq_unlock' directly updates
the value of CPSR control field with the IRQ key and this can cause
other state bits in CPSR to be corrupted. This problem is fixed by
conditionally enabling interrupt using CPSIE instruction when the
value of IRQ key is a zero.
3. The current implementation of 'z_arch_is_in_isr' checks the value
of CPSR MODE field and returns true if its value is IRQ or FIQ.
While this does not normally cause an issue, the function can return
false when IRQ offloading is used because the offload function
executes in SVC mode. This problem is fixed by adding check for SVC
mode.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The callee-saved registers have been separated out and will not
be saved/restored if exception debugging is shut off.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The context switch implementation forgot to save the current flag
state of the old thread, so on resume the flags would be restored to
whatever value they had at the last interrupt preemption or thread
initialization. In practice this guaranteed that the interrupt enable
bit would always be wrong, becuase obviously new threads and preempted
ones have interrupts enabled, while arch_switch() is always called
with them masked. This opened up a race between exit from
arch_switch() and the final exit path in z_swap().
The other state bits weren't relevant -- the oddball ones aren't used
by Zephyr, and as arch_switch() on this architecture is a function
call the compiler would have spilled the (caller-save) comparison
result flags anyway.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Use of the _current_cpu pointer cannot be done safely in a preemptible
context. If a thread is preempted and migrates to another CPU, the
old CPU record will be wrong.
Add a validation assert to the expression that catches incorrect
usages, and fix up the spots where it was wrong (most important being
a few uses of _current outside of locks, and the arch_is_in_isr()
implementation).
Note that the resulting _current expression now requires locking and
is going to be somewhat slower. Longer term it's going to be better
to augment the arch API to allow SMP architectures to implement a
faster "get current thread pointer" action than this default.
Note also that this change means that "_current" is no longer
expressible as an lvalue (long ago, it was just a static variable), so
the places where it gets assigned now assign to _current_cpu->current
instead.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The existing stack_analyze APIs had some problems:
1. Not properly namespaced
2. Accepted the stack object as a parameter, yet the stack object
does not contain the necessary information to get the associated
buffer region, the thread object is needed for this
3. Caused a crash on certain platforms that do not allow inspection
of unused stack space for the currently running thread
4. No user mode access
5. Separately passed in thread name
We deprecate these functions and add a new API
k_thread_stack_space_get() which addresses all of these issues.
A helper API log_stack_usage() also added which resembles
STACK_ANALYZE() in functionality.
Fixes: #17852
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This reverts commit 9987c2e2f9
which spills SoC configs into architecture files and is not
exactly desirable. So revert it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
All SoCs must now 'select' one of the CONFIG_<arch> symbols. Add an
ARCH_IS_SET helper symbol that's selected by the arch symbols and
checked in CMake, printing a warning otherwise.
Might save people some time until they're used to the new scheme.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
All board defconfig files currently set the architecture in addition to
the board and the SoC, by setting e.g. CONFIG_ARM=y. This spams up
defconfig files.
CONFIG_<arch> symbols currently being set in configuration files also
means that they are configurable (can be changed in menuconfig and in
configuration files), even though changing the architecture won't work,
since other things get set from -DBOARD=<board>. Many boards also allow
changing the architecture symbols independently from the SoC symbols,
which doesn't make sense.
Get rid of all assignments to CONFIG_<arch> symbols and clean up the
relationships between symbols and the configuration interface, like
this:
1. Remove the choice with the CONFIG_<arch> symbols in arch/Kconfig and
turn the CONFIG_<arch> symbols into invisible
(promptless/nonconfigurable) symbols instead.
Getting rid of the choice allows the symbols to be 'select'ed (choice
symbols don't support 'select').
2. Select the right CONFIG_<arch> symbol from the SOC_SERIES_* symbols.
This makes sense since you know the architecture if you know the SoC.
Put the select on the SOC_* symbol instead for boards that don't have
a SOC_SERIES_*.
3. Remove all assignments to CONFIG_<arch> symbols. The assignments
would generate errors now, since the symbols are promptless.
The change was done by grepping for assignments to CONFIG_<arch>
symbols, finding the SOC_SERIES_* (or SOC_*) symbol being set in the
same defconfig file, and putting a 'select' on it instead.
See
https://github.com/ulfalizer/zephyr/commits/hide-arch-syms-unsquashed
for a split-up version of this commit, which will make it easier to see
how stuff was done. This needs to go in as one commit though.
This change is safer than it might seem re. outstanding PRs, because any
assignment to CONFIG_<arch> symbols generates an error now, making
outdated stuff easy to catch.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
CUSTOM_SECTION_ALIGN is already defined within an 'if ARM_MPU', so it
does not need a 'depends on ARM_MPU'.
Flagged by https://github.com/zephyrproject-rtos/ci-tools/pull/128.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add TRACING_ISR Kconfig to help high latency backend working well.
Currently the ISR tracing hook function is put at the begining and
ending of ISR wrapper, when there is ISR needed in the tracing path
(especially tracing backend), it will cause tracing buffer easily
be exhausted if async tracing method enabled. Also it will increase
system latency if all the ISRs are traced. So add TRACING_ISR to
enable/disable ISR tracing here. Later a filter out mechanism based
on irq number will be added.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
if USERSPACE is configured, it needs to record the user/kernel mode
of interrupted thread, because the switch of aux_sec_k_sp/aux_user_sp
depends on the aux_irq_act's U bit.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Use BOOTLOADER definition to separate bootloader code. This allows to
use the same file reset-vector.S when building bootloader and when
CONFIG_XTENSA_RESET_VECTOR is enabled.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
There was a bug where double-dispatch of a single thread on multiple
SMP CPUs was possible. This can be mind-bending to diagnose, so when
CONFIG_ASSERT is enabled add an extra instruction to __resume (the
shared code path for both interupt return and context switch) that
poisons the shared RIP of the now-running thread with a recognizable
invalid value.
Now attempts to run the thread again will crash instantly with a
discoverable cookie in their instruction pointer, and this will remain
true until it gets a new RIP at the next interrupt or switch.
This is under CONFIG_ASSERT because it meets the same design goals of
"a cheap test for impossible situations", not because it's part of the
assertion framework.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Enable the shared IRQ for the UART line and enable the remaining tasks
that depends on a separated declaration of the TX/RX/Err/... IRQs.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The cmsis_rtos tests are failing because the stack size used by CMSIS is
too small. Customize the stack size for the aarch64 architecture and
re-enable the tests.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
ARMv8-A SoCs enter EL3 after reset. Add a new config option
(CONFIG_SWITCH_TO_EL1) to switch from EL3 to EL1 at boot and default it
to 'y'.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
While QEMU's Cortex-A53 emulation by default only emulates a CPU in EL1,
other QEMU forks (for example the QEMU released by Xilinx) and real
hardware starts in EL3.
To support all the ELn we introduce a macro to identify at run-time the
Exception Level and take the correct actions.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
To be able to pass the unit test we need to add a set of defines for the
ARM64 architecture. Fix this.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
To be able to successfully compile the kernel for the ARM64 architecture
we have to tweak the compiler-related files to be able to use the
AArch64 GCC compiler.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Introduce the basic ARM64 architecture support.
A new CONFIG_ARM64 symbol is introduced for the new architecture and new
cmake / Kconfig files are added to switch between ARM and ARM64.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Dynamic MPU regions are used in build configurations with User
mode or MPU-based stack-overflow guards. If these features are
disabled, we skip calling the ARM function for re-programming
the MPU peripheral during context-switch. We also skip doing
this when jumping to main thread (although this brings limited
performace gain as it is called once in the boot cycle)
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Users are reportedly not able to understand how to debug the following
error message from gen_isr_tables:
gen_isr_tables.py: multiple registrations at table_index 8 for irq 8
Debugging issues these kinds of issues is difficult so we need to give
users as much information as possible.
To make it clearer that it could be an abuse of the 'IRQ_CONNECT' API
that is causing the issue we add this to the error message.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
In zephyr_linker_sources().
This is done since the point of the location is to place things at given
offsets. This can only be done consistenly if the linker code is placed
into the _first_ section.
All uses of TEXT_START are replaced with ROM_START.
ROM_START is only supported in some arches, as some arches have several
custom sections before text. These don't currently have ROM_START or
TEXT_START available, but that could be added with a bit of refactoring
in their linker script.
No SORT_KEYs are changed.
This also fixes an error introduced when TEXT_START was added, where
TEXT_SECTION_OFFSET was applied to riscv's common linker.ld instead of
to openisa_rv32m1's specific linker.ld.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
openocd linker sections are not supposed to be part of the
vector table sections. Place the sections after we define
the _vector_end linker symbol.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The original intent was that the output handle be written through the
pointer in the second argument, though not all architectures used that
scheme. As it turns out, that write is becoming a synchronization
signal, so it's no longer optional.
Clarify the documentation in arch_switch() about this requirement, and
add an instruction to the x86_64 context switch to implement it as
original envisioned.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Define there options for runtime error handling:
- assert on all errors (ASSERT_ON_ERRORS)
- no runtime checks (no asserts, no runtime error handling)
(NO_RUNTIME_CHECKS)
- full runtime error handling (the default) (RUNTIME_ERROR_CHECKS)
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds a Kconfig symbol for specifying whether the SoC
implements the CPU DWT feature.
The Data Watchpoint and Trace (DWT) is an optional debug unit for the
Cortex-M family cores (except ARMv6-M; i.e. M0 and M0+) that provides
watchpoints, data tracing and system profiling capabilities.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Implement a set of per-cpu trampoline stacks which all
interrupts and exceptions will initially land on, and also
as an intermediate stack for privilege changes as we need
some stack space to swap page tables.
Set up the special trampoline page which contains all the
trampoline stacks, TSS, and GDT. This page needs to be
present in the user page tables or interrupts don't work.
CPU exceptions, with KPTI turned on, are treated as interrupts
and not traps so that we have IRQs locked on exception entry.
Add some additional macros for defining IDT entries.
Add special handling of locore text/rodata sections when
creating user mode page tables on x86-64.
Restore qemu_x86_64 to use KPTI, and remove restrictions on
enabling user mode on x86-64.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
generated_dts_board.h is pretty redundant and confusing as a name. Call
it devicetree.h instead.
dts.h would be another option, but DTS stands for "devicetree source"
and is the source code format, so it's a bit confusing too.
The replacement was done by grepping for 'generated_dts_board' and
'GENERATED_DTS_BOARD'.
Two build diagram and input-output SVG files were updated as well, along
with misc. documentation.
hal_ti, mcuboot, and ci-tools updates are included too, in the west.yml
update.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
KPTI is still work-in-progress on x86_64. Don't allow
user mode to be enabled unless the SOC/board configuration
indicates that the CPU in use is invulnerable to meltdown
attacks.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
See CVE-2019-1125. We mitigate this by adding an 'lfence'
upon interrupt/exception entry after the decision has been
made whether it's necessary to invoke 'swapgs' or not.
Only applies to x86_64, 32-bit doesn't use swapgs.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
- In early boot, enable the syscall instruction and set up
necessary MSRs
- Add a hook to update page tables on context switch
- Properly initialize thread based on whether it will
start in user or supervisor mode
- Add landing function for system calls to execute the
desired handler
- Implement arch_user_string_nlen()
- Implement logic for dropping a thread down to user mode
- Reserve per-CPU storage space for user and privilege
elevation stack pointers, necessary for handling syscalls
when no free registers are available
- Proper handling of gs register considerations when
transitioning privilege levels
Kernel page table isolation (KPTI) is not yet implemented.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This code:
1) Doesn't work
2) Hasn't ever been enabled by default
3) We mitigate Spectre V2 via Extended IBRS anyway
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We use a fixed value of 32 as the way interrupts/exceptions
are setup in x86_64's locore.S do not lend themselves to
Kconfig configuration of the vector to use.
HW-based kernel oops is now permanently on, there's no reason
to make it optional that I can see.
Default vectors for IPI and irq offload adjusted to not
collide.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is causing problems, as if we create a thread in
a system call we will *not* be using the kernel page
tables if CONFIG_KPTI=n.
Just don't fiddle with this page's permissions; we don't
need it as a guard area anyway since we have a stack
guard placed immediately before it, and this page
is unused if user mode isn't active.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Nothing too fancy here, we try as much as possible to
use the same register layout as the C calling convention.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These are now common code, all are related to user mode
threads. The rat's nest of ifdefs in ia32's arch_new_thread
has been greatly simplified, there is now just one hook
if user mode is turned on.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
z_x86_thread_page_tables_get() now works for both user
and supervisor threads, returning the kernel page tables
in the latter case. This API has been up-leveled to
a common header.
The per-thread privilege elevation stack initial stack
pointer, and the per-thread page table locations are no
longer computed from other values, and instead are stored
in thread->arch.
A problem where the wrong page tables were dumped out
on certain kinds of page faults has been fixed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add two new non-static APIs for dumping out the
page table entries for a specified memory address,
and move to the main MMU code. Has debugging uses
when trying to figure out why memory domains are not
set up correctly.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We don't need to set up GDT data descriptors for setting
%gs. Instead, we use the x86 MSRs to set GS_BASE and
KERNEL_GS_BASE.
We don't currently allow user mode to set %gs on its own,
but later on if we do, we have everything set up to issue
'swapgs' instructions on syscall or IRQ.
Unused entries in the GDT have been removed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These were previously assumed to always be fatal.
We can't have the faulting thread's XMM registers
clobbered, so put the SIMD/FPU state onto the stack
as well. This is fairly large (512 bytes) and the
execption stack is already uncomfortably small, so
increase to 2K.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit addresses the following issues:
1. Add a new Kconfig configuration for specifying Dual-redundant Core
Lock-step (DCLS) processor topology.
2. Register initialisation is only required when Dual-redundant Core
Lock-step (DCLS) is implemented in hardware. This initialisation is
required on DCLS only because the architectural registers are in an
indeterminate state after reset and therefore the initial register
state of the two parallel executing cores are not guaranteed to be
identical, which can lead to DCCM detecting it as a hardware fault.
A conditional compilation check for this hardware configuration
using the newly added CONFIG_CPU_HAS_DCLS flag has been added.
3. The existing CPU register initialisation code did not take into
account the banked registers for every execution mode. The new
implementation ensures that all architectural registers of every
mode are initialised.
4. Add VFP register initialisation for when floating-point support is
enabled and the core is configured in DCLS topology. This
initialisation sequence is required for the same reason given in
the first issue.
5. Add provision for platform-specific initialisation on Cortex-R
using PLATFORM_SPECIFIC_INIT config and z_platform_init function.
6. Remove seemingly pointless and inadequately defined STACK_MARGIN.
Not only does it violate the 8-byte stack alignment rule, it does
not provide any form of real stack protection.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The atomic_cas function was using incorrect register when determining
whether value was swapped. The swapping instruction s32c1i in
atomic_cas stores the value at memory location in register a4
regardless of whether swapping is done. In this case, the register a4
should be used to determine whether a swap is done. However, register
a3 (containing the oldValue as function argument) is used instead.
Since register a5 contains the old value at address loaded before
the swapping instruction, a3 and a5 contain the same value.
Since a3 == a5 is always true in this case, the function will always
return 1 even though values are not swapped. So fix it by using
the correct register.
Also, in case the value is not swapped, it jumps to where it returns
zero instead of loading from memory and comparing again.
The function was simply looping until swapping was done, which did not
align with the API where it would return 0 when swapping is not done
(regardless whether the memory location contains the old value or not).
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commits implements the support for dynamic direct
interrupts for the ARM Cortex-M architecture, and exposes
the support to the user as an ARM-only API.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
With this commit we add support for Dynamic Direct interrupts
for the ARM Cortex-M architecture. For that we introduce a new,
user-enabled, Kconfig symbol, DYNAMIC_DIRECT_INTERRUPTS.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The system power management handling code in the '_isr_wrapper' enables
interrupts by executing the 'cpsie i' instruction, which causes a
system crash on the Cortex-R devices because the Cortex-R arch port
does not support nested interrupts at this time.
This commit restricts the interrupt state manipulations in the system
power management code to the Cortex-M arch, in order to prevent
interrupt nesting on other AArch32 family archs (only Cortex-R for
now).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The SRAM address and size are currently available as both
DT_SRAM_{BASE_ADDRESS,SIZE} and as CONFIG_SRAM_{BASE_ADDRESS,SIZE} (via
the Kconfig preprocessor).
Use the CONFIG_SRAM_* versions everywhere, and remove generation of the
DT_SRAM_* versions from gen_defines.py.
The Kconfig symbols currently depend on 'ARC || ARM || NIOS2 || X86'.
Not sure why, so I removed it.
It looks like no configuration files set CONFIG_SRAM_* at the moment, so
another option might be to use the DT_* symbols everywhere instead. Some
Kconfig.defconfig.series files add defaults to them though.
Also improve the help texts for CONFIG_SRAM_* to say that they normally
come from devicetree rather than configuration files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This is no longer needed, since all in-tree platforms are only using
the standard mstatus formats. Remove it to avoid the complexity.
Signed-off-by: Olof Johansson <olof@lixom.net>
Same deal as in commit 41713244b3 ("kconfig: Remove '# Hidden' comments
on promptless symbols"). I forgot to do a case-insensitive search.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit enables the CMSIS-Core(R) processor interface driver for
the Cortex-R platforms by default.
The CMSIS-Core component provides a set of standard interface functions
to control the Cortex-R series processor cores and will be required by
the arch port as well as other CMSIS library components (e.g. CMSIS-DSP
and CMSIS-NN).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
How prompts work is better documented nowadays, and these comments might
not be that helpful if you don't know.
There are lots promptless symbols that don't have a comment.
Also fix up some comments in arch/Kconfig that seem misplaced/redundant,
and clean up some whitespace (no blank line after a comment makes it
look like it only applies to the symbol directly after it to me).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Same deal as in commit bd6e04411e ("kconfig: Clean up header comments
and make them consistent") and commit 1f38ea77ba ("kconfig: Clean up
'config FOO' (two spaces) definitions"), for some newly-introduced
stuff.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
A single menu within an if like
if FOO
menu "blah"
...
endmenu
endif
can be replaced with
menu "blah"
depends on FOO
...
endmenu
Fix up all existing instances.
Also remove redundant extra menus underneath 'menuconfig' symbols.
'menuconfig' already creates a menu.
Also remove the menu in arch/arm/core/aarch32/Kconfig around the
"Floating point ABI" choice. The choice depends on FLOAT, which depends
on CPU_HAS_CPU, so remove the 'depends on CPU_HAS_FPU' too.
Piggyback removing a redundant 'default n' for BME280.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Out-of-tree code can still be using the old file locations. Introduce
header shims to include the headers from the new correct location and
print a warning message.
Add also a new Kconfig symbol to suppress such warning.
The shim will go away after two releases, so make sure to adapt your
application for the new locations.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Before introducing the code for ARM64 (AArch64) we need to relocate the
current ARM code to a new AArch32 sub-directory. For now we can assume
that no code is shared between ARM and ARM64.
There are no functional changes. The code is moved to the new location
and the file paths are fixed to reflect this change.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
to its own linker file snippet so snippets can be placed before it.
Using zephyr_linker_sources().
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
This adds the necessary bits to build the Xtensa HAL as
a module, and removes the bits to use the HAL built with
the Zephyr SDK.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
To be able to define main() in C++ code we need to have its
prototype defined somewhere visibly. Otherwise name mangling
will prevent the linker from finding it.
Zephyr assumes a void main(void) prototype and therefore
this will be the prototype after renaming:
void zephyr_app_main(void);
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Runtime stack traces (at least as currently implemented)
don't work on x86_64 normally as RBP is treated as a general-
purpose register. Depend on CONFIG_NO_OPTIMIZATIONS to enable
this on 64-bit.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
qemu_x86_64 will exit the emulator on a fatal system error,
like qemu_x86 already does.
Improves CI times when tests fail since sanitycheck will not
need to wait for the timeout to expire.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We now dump more information for less common cases,
and this is now centralized code for 32-bit/64-bit.
All of this code is now correctly wrapped around
CONFIG_EXCEPTION_DEBUG. Some cruft and unused defines
removed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We need a size_t and not a u32_t for partition sizes,
for 64-bit compatibility.
Additionally, app_memdomain.h was also casting the base
address to a u32_t instead of a uintptr_t.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This is causing problems, as if we create a thread in
a system call we will *not* be using the kernel page
tables if CONFIG_KPTI=n, resulting in a crash when
the later call to copy_page_tables() tries to initialize
the PDPT (which is in the same page as the privilege
stack).
Just don't fiddle with this page's permissions; we don't
need it as a guard area anyway since we have a stack
guard placed immediately before it, and this page
is unused if user mode isn't active.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Also replace some
config
prompt "foo"
bool/int
with the more common shorthand
config
bool/int "foo"
See the 'Style recommendations and shorthands' section in
https://docs.zephyrproject.org/latest/guides/kconfig/index.html.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix misspellings in docs (and Kconfig and headers processed into docs)
missed during regular reviews.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
When we build without support for user mode, we do not need
a large number of MPU regions, so we should not allow having
MPU_GAP_FILLING unset. This would allow PRIV code execute from
SRAM, which is an unnecessary compromise on ARMv8-M builds
without USERSPACE support. We update the Kconfig dependencies
and add a sentence for clarification.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For some reason, some users have been facing a bizarre issue
in which the -m32 option was not being passed to the linker
by cmake when building for the POSIX arch as a 32bit target,
even though the option was actually supported.
Instead of using zephyr_ld_options() which checks if an
option is supported and drops it otherwise, use
zephyr_link_libraries()
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
It's found that in nsim_hs_smp, sometimes the cpu
doesn't response inter-core interrupt after executing sleep
instruction.
It may be a bug of nsim, but needs more time to
investigate the root of this issue.
This commit is a workround for this, as nsim is just an
instruction simulator, no direct impact.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* necessary fixes after commit 11bd67db where ipi interrupt is used
to notify other cores to do a thread switch if necessary
* then for arc, it's needed to ignore swap_ok and check whether thread
switch is needed in the exit of irq handling.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
dyn_reg_info has MPU_DYNAMIC_REGION_AREAS_NUM elements, just changing
the if check to be greater equal to this number to avoid access
MPU_DYNAMIC_REGION_AREAS_NUM element causing an out-of-bounds write.
CID: 205648
Fixes#20487
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The races are believed to be resolved with the patch to
irq_offload(). Allow the MMU to be turned on and enable
it for qemu_x86_64.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Move PLATFORM_SPECIFIC_INIT declaration from Cortex-M Kconfig to the
ARM arch Kconfig in order to make it available for all ARM variants.
The rationale is that there is really no good reason why
platform-specific initialisation should be a Cortex-M-specific feature
and that Cortex-R port is expected to utilise this in a near future.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit inlines the direct ISR functions that were previously
implemented in irq_manage.c, since the PR #20119 resolved the circular
dependency between arch.h and kernel_structs.h described in the issue
#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit inlines arch_isr_direct_header function that was previously
placed in irq_manage.c for no good reason (possibly in relation to the
FIXME for #3056).
In addition, since the PR #20119 resolved the header circular
dependency issue described in the issue #3056, this commit removes the
references to it in the code.
The reason for not inlining _arch_is_direct_pm as the #3056 FIXME
suggests is that there is little to gain from doing so and there still
exists circular dependency for the headers required by this function
(#20119 only addresses kernel_structs.h, which is required for _current
and _kernel, which, in turn, is required for handling interrupt nesting
in many architectures; in fact, Cortex-A and Cortex-R port will require
it as well).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Mark the old time conversion APIs deprecated, leave compatibility
macros in place, and replace all usage with the new API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These are not part of the generic kernel to
architecture interface, rename appropriately to
reflect they are ARC-specific.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This API was only created to facilitate testing of kernel
objects in IRQ context, never for actual applications.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We allow the run-time, full paritioning of the SRAM space by the
ARMv8-M MPU driver to be an optional feature.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit moves the function mpu_configure_regions(.) from
arm_mpu_v7_internal.h to arm_mpu.c. The function is to be used
by the both ARMv7-M MPU driver, as well as the ARMv8-M MPU
driver (when it behaves like the ARMv7-M driver).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We introduce MPU_GAP_FILLING Kconfig option that instructs
the MPU driver to enforce a full SRAM partitioning, when it
programs the dynamic MPU regions (user thread stack, PRIV stack
guard and application memory domains) at context-switch. We
allow this to be configurable, in order to increase the number
of MPU regions available for application memory domain programming.
This option is introduced in arch/Kconfig, as it is expected
to serve as a cross-ARCH symbol. The option can be set by the
user during build configuration.
By not enforcing full partition, we may leave part of kernel
SRAM area covered only by the default ARM memory map. This
is fine for User Mode, since the background ARM map does not
allow nPRIV access at all. The difference is that kernel code
will be able to attempt fetching instructions from kernel SRAM
area without this leading directly to a MemManage exception.
Since this does not compromize User Mode, we make the skipping
of full partitioning the default behavior for the ARMv8-M MPU
driver. The application developer may be able to overwrite this.
In the wake of this change we update the macro definitions in
arm_core_mpu_dev.h that derive the maximum number of MPU regions
for application memory domains.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Some code for unwinding stacks and z_x86_fatal_error()
now in a common C file, suitable for both modes.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When compiling the components under the arch directory, the compiler
include paths for arch and kernel private headers need to be specified.
This was previously done by adding 'zephyr_library_include_directories'
to CMakeLists.txt file for every component under the arch directory,
and this resulted in a significant amount of duplicate code.
This commit uses the CMake 'include_directories' command in the root
CMakeLists.txt to simplify specification of the private header include
paths for all the arch components.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).
Go for the most common style:
- Indent properties with a single tab, including for choices.
Properties on choices work exactly the same syntactically as
properties on symbols, so not sure how the no-indentation thing
happened.
- Indent help texts with a tab followed by two spaces
- Put a space between 'config' and the symbol name, not a tab. This
also helps when grepping for definitions.
- Do '# A comment' instead of '#A comment'
I tweaked Kconfiglib a bit to find most of the stuff.
Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In the cortex-r port we are currently using GIC as a fake cascade
controller hooked to a fake parent IRQ #0. And in gic_init() we use
IRQ_CONNECT() to connect this dummy IRQ.
Unfortunately this value is shifted and offset when calling
irq_set_priority_next_level() that tries to set the IRQ priority on a
value of 0xffffffff.
This value is offset again in gic_irq_set_priority() that actually sets
the priority on the PPI #31.
Fix this avoiding to set any priority for IRQ #0.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Existed already in commit 8ddf82cf70 ("First commit"). Has never been
used.
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Existed already in commit 8ddf82c ("First commit"). Has never been
used.
Found with a script.
Also remove some pointless menus that have no visible symbols in them.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Adding r0 to the clobber list in the inline ASM block of
z_arch_switch_to_main_thread(). This instructs assembler
to not use r0 to store ASM expression operands, e.g. in
the subsequent instruction, msr PSR %1.
We also do a minor optimization with the clearing of R1
before jumping to main.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a common definition for NUM_IRQS in arch/arm/core/Kconfig and
arch/riscv/Kconfig. That way, the type doesn't have to be given for
NUM_IRQS in all the Kconfig.defconfig files.
Trying to get rid of unnecessary "full" symbol definitions in
Kconfig.defconfig files, to make the organization clearer. It can also
help with finding unused symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
There are two set of code supporting x86_64: x86_64 using x32 ABI,
and x86 long mode, and this consolidates both into one x86_64
architecture and SoC supporting truly 64-bit mode.
() Removes the x86_64:x32 architecture and SoC, and replaces
them with the existing x86 long mode arch and SoC.
() Replace qemu_x86_64 with qemu_x86_long as qemu_x86_64.
() Updates samples and tests to remove reference to
qemu_x86_long.
() Renames CONFIG_X86_LONGMODE to CONFIG_X86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Define FP_FPU_DA in arch/arc/Kconfig to make it always available. That
way, the Kconfig.defconfig definitions can skip the type, making them
incomplete if the base definition of the symbol disappears. That makes
the organization easier to understand and errors easier to spot.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Define CPU_EM4* and CPU_EM6 in arch/arc/Kconfig to make them always
available. That way, the Kconfig.defconfig definitions can skip the
type, making them incomplete if the base definition of the symbol
disappears. That makes the organization easier to understand and errors
easier to spot.
The help texts were taken from
https://gcc.gnu.org/onlinedocs/gcc/ARC-Options.html. Help texts for
invisible symbols can be checked in the menuconfig too if you go into
show-all mode, so they're better than adding a comment.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
posix_soc_if.h is meant to be a private header between
the POSIX ARCH, SOC, and maybe boards,
it should not contain definitions meant to be used directly
by the kernel or app.
Some definitions were placed here due to a dependency moebius
loop.
Unravel that by removing all header dependencies in posix_soc_if.h,
move those definitions out to a more logical place,
and while we are here reduce the amount of users of
irq_offload.h in POSIX arch related code
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The page tables to use are now stored in the cpuboot struct.
For the first CPU, we set to the flat page tables, and then
update later in z_x86_prep_c() once the runtime tables have
been generated.
For other CPUs, by the time we get to z_arch_start_cpu()
the runtime tables are ready do go, and so we just install
them directly.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
- Bring in CONFIG_X86_MMU and some related defines to
common X86 Kconfig
- Don't set ARCH_HAS_USERSPACE for intel64 yet when
X86_MMU is enabled
- Uplevel x86_mmu.c to common code
- Add logic for handling PML4 table and generating PDPTs
- move z_x86_paging_init() to common kernel_arch_func.h
- Uplevel inclusion of mmustructs.h to common x86 arch.h,
both need it for memory domain defines
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Program text, rodata, and data need different MMU
permissions. Split out rodata and data from the program
text, updating the linker script appropriately.
Region size symbols added to the linker script, so these
can later be used with MMU_BOOT_REGION().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Same deal as in commit 7fdb525754 ("kconfig: Use 'default' instead of
'def_bool' in Kconfig.defconfig files"), but I hacked Kconfiglib to also
find cases where the type is given separately as e.g.
config FOO
int
default 3
Motivation (from a note in
https://docs.zephyrproject.org/latest/guides/kconfig/index.html):
For a symbol defined in multiple locations (e.g., in a
Kconfig.defconfig file in Zephyr), it is best to only give the
symbol type for the "base" definition of the symbol, and to use
'default' (instead of 'def_<type>' value) for the remaining
definitions. That way, if the base definition of the symbol is
removed, the symbol ends up without a type, which generates a
warning that points to the other definitions. That makes the extra
definitions easier to discover and remove.
It's also nice if 'def_bool' and the like turn into a semi-reliable flag
that the symbol is only defined in Kconfig.defconfig files. That might
be a sign that things could be cleaned up.
Will do a separate pass later to remove some symbols only defined in
Kconfig.defconfig files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
We add an ARM internal API which allows the kernel to
infer the execution mode we are going to return after
the current exception.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We introduce a Kconfig option to signify whether
an Architecture has the capability of detecting
whether execution is, currently, in a nested
exception.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We re-implement the z_arch_is_in_isr function
so it aligns with the implementation for other
ARCHEs, i.e. returning false whenever any IRQ
or system exception is active.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit refactors and cleans up __fault, so the function
- reduces to supplying MSP, PSP, and EXC_RETURN to the C
function for fault handling
- simplifies itself, removing conditional
implementation, i.e. based on ARM Secure firmware,
The reason for that is simple: it is much better to write the
fault handling in C instead of assembly, so we really do only
what is strictly required, in assembly.
Therefore, the commit refactors the z_arm_fault() function
as well, organizing better the different functional blocks,
that is:
- unlocking interrupts
- retriving ESF
- asserting for HW errors
- printing additional error logs
The refactoring unifies the way the ESF is retrieved for the
different Cortex-M variants and security execution states.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add some documentation for ARM-specific function
z_do_kernel_oops, stating clearly that it is only
invoked inside SVC context. We also comment on
the validity of the supplied ESF.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We add a useful inline comment in the SVC handler (written in
assembly), which identifies one of the function return points
a bit more clearly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Replace:
dt_chosen_reg_addr
dt_chosen_reg_size
dt_node_reg_addr
dt_node_reg_size
with:
dt_chosen_reg_addr_int
dt_chosen_reg_size_int
dt_chosen_reg_addr_hex
dt_chosen_reg_size_hex
dt_node_reg_addr_int
dt_node_reg_size_int
dt_node_reg_addr_hex
dt_node_reg_size_hex
So that we get the proper formatted string for the type of symbol.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
"brk" is a break-point instruction which among other things
halts ARC core. As compared to pure halt (which is "flag 1" for ARC)
it is much more convenient as it might be executed from either
secure mode or normal mode (with SecureShield enabled), while "flag"
instruction will raise privilege violation exception if SecureShield
is enabled and we're in "normal" mode.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Unused since commit 6fd6b7e50a ("xtensa: remove legacy arch
implementation").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Unused since commit 6fd6b7e50a ("xtensa: remove legacy arch
implementation").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Duplicate definitions elsewhere have been removed.
A couple functions which are defined by the arch interface
to be non-inline, but were implemented inline by native_posix
and intel64, have been moved to non-inline.
Some missing conditional compilation for z_arch_irq_offload()
has been fixed, as this is an optional feature.
Some massaging of native_posix headers to get everything
in the right scope.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* implement DIRECT IRQ support both for normal irq and fast irq.
* add separate interrupt stack for fast irq and use CONFIG_ARC_
_FIRQ_STACK to control it. This will bring shortest interrupt
latency for fast irq.
* note that scheduing in DIRECT IRQ is not supported.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Unused after commit 71ce8ceb18 ("kernel: consolidate error handling
code").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The PDPT was moved to the stack area since it has alignment
requirements, but never removed from here.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The intel64 switch implementation doesn't actually use a switch handle
per se, just the raw thread struct pointers which get stored into the
handle field. This works fine for normally initialized threads, but
when switching out of a dummy thread at initialization, nothing has
initialized that field and the code was dumping registers into the
bottom of memory through the resulting NULL pointer.
Fix this by skipping the load of the field value and just using an
offset instead to get the struct address, which is actually slightly
faster anyway (a SUB immediate instruction vs. the load).
Actually for extra credit we could even move the switch_handle field
to the top of the thread struct and eliminate the instruction
entirely, though if we did that it's probably worth adding some
conditional code to make the switch_handle field disappear entirely.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This commit updates all references to HAS_CMSIS to use HAS_CMSIS_CORE
instead. With the changes introduced to allow multiple CMSIS variants
to be specified, the latter is semantically equivalent to the former.
For more details, see issue #19717.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
In this commit we implement the assembly functions in userspace.S
- z_arm_userspace_enter()
- z_arm_do_syscall()
- z_arch_user_string_nlen()
for ARMv6-M and ARMv8-M Baseline architecture. We "inline" the
implementation for Baseline, along with the Mainline (ARMv7-M)
implementation, i.e. we rework only what is required to build
for Baseline Cortex-M.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In this commit we implement the assembly functions in
swap_helper.S, namely
- z_arm_pendsv()
- z_arm_svc()
for ARMv6-M and ARMv8-M Baseline architecture. We "inline" the
implementation for Baseline, along with the Mainline (ARMv7-M)
implementation, i.e. we rework only what is required to build
for Baseline Cortex-M.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We do not support HW Stack protection capabilities in
Cortex-M Baseline CPUs (unless they have built-in stack
overflow detection capability). We adapt the Kconfig
option to reflect this.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove the
# Omit prompt to signify a "hidden" option
comments that appear on some symbols. They seem to have been copy-pasted
at random, as there are lots of promptless symbols that don't have them
(that's confusing in itself, because it might give the idea that the
ones with comments are special in some way).
I suspect those comments wouldn't have helped me much if I didn't know
Kconfig either. There's a lot more Kconfig documentation now too, e.g.
https://docs.zephyrproject.org/latest/guides/kconfig/index.html.
Keep some comments that give more information than the symbol having no
prompt.
Also do some minor drive-by cleanup.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This is an optional feature and no logic for it should
be present unless CONFIG_IRQ_OFFLOAD is enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Line up everything nicely, add leading '0x' to hex
addresses, and remove redundant newlines. Add
whitespace between the register name and contents
so the contents can be easily selected from a terminal.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The struct definitions for pdpt, pd, and pt entries has been
removed:
- Bitfield ordering in a struct is implementation dependent,
it can be right-to-left or left-to-right
- The two different structures for page directory entries were
not being used consistently, or when the type of the PDE
was unknown
- Anonymous structs/unions are GCC extensions
Instead these are now u64_t, with bitwise operations used to
get/set fields.
A new set of inline functions for fetcing various page table
structures has been implemented, replacing the older macros.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This hasn't been necessary since we dropped support for 32-bit
non-PAE page tables. Replace it with u64_t and scrub any
unnecessary casts left behind.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This will be used for both 32-bit and 64-bit mode.
This header gets pulled in by x86's arch/cpu.h, so put
it in include/arch/x86/.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some assembly simplifications, to make code common for ARMv6
and ARMv7 architecture.
We can use ldrb, directly for reading the SVC encoding; this
removes the need for ANDing the result with 0xff right below.
We remove an immediate value of 0 from an str instruction, as
it's redundant.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add more documentation and inline explanatory comments in
assembly sources swap_helper.S and userspace.S and remove
redundant/wrong documentation when applicable.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
ARM user space requires ARM_MPU. We can, therefore,
remove the unnecessary #ifdef CONFIG_ARM_MPU blocks
in userspace.S. In addition, we do minor refactoring
in z_arm_userspace_enter(), and z_arm_pendsv(), and
z_arm_svc(), aiming at reducing the push/pop overhead
as much as possible.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
include/sys/arch_inlines.h will contain all architecture APIs
that are used by public inline functions and macros,
with implementations deriving from include/arch/cpu.h.
kernel/include/arch_interface.h will contain everything
else, with implementations deriving from
arch/*/include/kernel_arch_func.h.
Instances of duplicate documentation for these APIs have been
removed; implementation details have been left in place.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Set the NXE bit in the EFER MSR so that the NX bit can
be set in page tables. Otherwise, the NX bit is treated
as reserved and leads to a fault if set.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
arch/arm/core is shared between Cortex-M and Cortex-R, so
enhance the file description headers accordingly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
A clean-up commit that removes unnecessary inclusions from
assembly files in arm/core and arm/core/cortex_m. It also
ogranizes the inclusions based on the following order and
set of rules:
- never include kernel_structs.h
- include toolchain.h and linker/sections.h in all ASM files
- include offsets-short.h, if ASM accesses offset constants
- include arch/cpu.h, if ASM accesses CMSIS constants
(defined locally in include/arch/arm)
- include file-specific headers, if needed (e.g. vector-table.h)
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
after recent changes in zephyr's fault handling, e.g. use log
to repace printk, it requires more stack to exception handling, or
the stack overflow may happen and crash the system.
this commit adds a kconfig option for exception stack size with
a larger default size.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
The POSIX ARCH delegates some of the tasks which normally
are taken care of by the ARCH to the SOC or BOARD levels.
To avoid changes in the kernel-arch IF propagating into
the arch-soc and arch-board interfaces (which would break
off-tree posix boards) isolate them.
Also move arch inlined functions into the arch.h header,
and out from the headers which specify the posix arch-soc
and arch-board interfaces.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
arch/cpu.h and kernel_arch_func.h are expected to define different
functions, per the architecture interface.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There's no compelling reason why this should be inline unlike all
other arches, it's a large function, called exactly once.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The specification for these arch APIs is to have them inline,
and the bodies were just oneliners calling another function
anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add in-line documentation describing the process of register
preservation and exception handling on Cortex-R.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The interrupt exit and swap service routines for Cortex-R
unnecessarily preserve r0 and lr registers when making function calls
using bl instruction.
In case of _IntExit in exc_exit.S, the r0 register containing the
caller mode is preserved at the top, and the lr register can safely be
assumed to have been saved into the system mode stack by the interrupt
service routine.
In case of __svc in swap_helper.S, since the function saves lr to the
system mode stack at the top and exits through _IntExit, it is not
necessary to preserve lr register when executing bl instructions.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
It's possible to have multiple processors configured without using the
SMP scheduler, so don't make definitions dependent on CONFIG_SMP.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
In non-SMP MP situations, the interrupt stacks might not exist, so
do not assume they do. Instead, initialize the TSS IST1 from the
cpuboot[] vector (meaning, on APs, the stack from z_arch_start_cpu).
Eliminates redundancy at the same time.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This is the Wrong Thing(tm) with SMP enabled. Previously this
worked because interrupts would be re-enabled in the interrupt
entry sequence, but this is no longer the case.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
was ignoring the rest of the expression, though the effect was
harmless (including unreachable code in some builds).
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Trivial change to the Kconfig: the first 32 vectors are reserved,
so it's not possible to have 256 IRQ vectors. Change max to 224.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Add duplicate per-CPU data structures (x86_cpuboot, tss, stacks, etc.)
for up to 4 total CPUs, add code in locore and z_arch_start_cpu().
The test board, qemu_x86_long, now defaults to 2 CPUs.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Take a dummy first argument, so that the BSP entry point (z_x86_prep_c)
has the same signature as the AP entry point (smp_init_top).
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
A new 'struct x86_cpuboot' is created as well as an instance called
'x86_cpuboot[]' which contains per-CPU boot data (initial stack,
entry function/arg, selectors, etc.). The locore now consults this
table to set up per-CPU registers, etc. during early boot.
Also, rename tss.c to cpu.c as its scope is growing.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
There's no need to qualify the 64-bit CS/DS selectors, and the GS and
TR selectors are renamed CPU0_GS and CPU0_TR as they are CPU-specific.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
In some places the code was being overly pedantic; e.g., there is no
need to load our own 32-bit descriptors because the loader's are fine
for our purposes. We can defer loading our own segments until 64-bit.
The sequence is re-ordered to faciliate code sharing between the BSP
and APs when SMP is enabled (all BSP-specific operations occur before
the per-CPU initialization).
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This is really just to facilitate CPU bootstrap code between
the BSP and the APs, moving the clear operation out of the way.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
In the general case, the local APIC can't be treated as a normal device
with a single boot-time initialization - on SMP systems, each CPU must
initialize its own. Hence the initialization proper is separated from
the device-driver initialization, and said initialization is called
from the early startup-assembly code when appropriate.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The 32-bit and 64-bit assembly startup sequences share quite a
bunch of common code, so it's factored out into one file to avoid
repeating ourselves (and potentially falling out of sync).
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The linker script was missing symbols that defined the boundaries
of kernel memory segments (_image_rom_end, etc.). These are added
so that core/memmap.c can properly account for those segments.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Elevate the previously 32-bit-only z_x86_prep_c() function to common
code, so both 32-bit and 64-bit arches now enter the kernel this way.
Minor changes to prep_c.c to make it build with the SMP scheduler on.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
And set qemu_x86_long board to build with CONFIG_SMP=y by default.
Apparently two benchmark tests - latency_measure and sys_kernel -
do not work with the SMP scheduler, so those tests are disabled.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This patch is a preparatory step in enabling the MMU in
long mode; no steps are taken to implement long mode support.
We introduce struct x86_page_tables, which represents the
top-level data structure for page tables:
- For 32-bit, this will contain a four-entry page directory
pointer table (PDPT)
- For 64-bit, this will (eventually) contain a page map level 4
table (PML4)
In either case, this pointer value is what gets programmed into
CR3 to activate a set of page tables. There are extra bits in
CR3 to set for long mode, we'll get around to that later.
This abstraction will allow us to use the same APIs that work
with page tables in either mode, rather than hard-coding that
the top level data structure is a PDPT.
z_x86_mmu_validate() has been re-written to make it easier to
add another level of paging for long mode, to support 2MB
PDPT entries, and correctly validate regions which span PDPTE
entries.
Some MMU-related APIs moved out of 32-bit x86's arch.h into
mmustructs.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch re-namespaces global variables and functions
that are used only within the arch/arm/ code to be
prefixed with z_arm_.
Some instances of CamelCase have been corrected.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* the old codes may not save the caller saved regs correctly,
e.g. r7- r12. Because the sys call entry is called in the form
of static inline function. The compiler optimizations may not save
all the caller saved regs.
* new codes use the irq stack frame as the sys call frame and gurantee
all the called saved regs are pushed and popped correctly.
* the side effect of new codes are more stack operations and a little
overhead.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This makes it clearer that this is an API that is expected
to be implemented at the architecture level.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The main and idle threads, and their associated stacks,
were being referenced in various parts of the kernel
with no central definition. Expose these in kernel_internal.h
and namespace with z_ appropriately.
The main and idle threads were being defined statically,
with another variable exposed to contain their pointer
value. This wastes a bit of memory and isn't accessible
to user threads anyway, just expose the actual thread
objects.
Redundance MAIN_STACK_SIZE and IDLE_STACK_SIZE defines
in init.c removed, just use the Kconfigs they derive
from.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This metric shows when the system first enters an idle
state, which has already been recorded in the arch-
independent implementation of the idle thread.
Only x86 was doing this.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of the core kernel -> architecture interface and
has been renamed z_arch_kernel_init().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
z_set_thread_return_value is part of the core kernel -> arch
interface and has been renamed to z_arch_thread_return_value_set.
z_set_thread_return_value_with_data renamed to
z_thread_return_value_set_with_data for consistency.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
k_cpu_idle() and k_cpu_atomic_idle() were being directly
implemented by arch code.
Rename these implementations to z_arch_cpu_idle() and
z_arch_cpu_atomic_idle(), and call them from new inline
function definitions in kernel.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of the core kernel -> architecture interface
and is appropriately renamed z_arch_is_in_isr().
References from test cases changed to k_is_in_isr().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of the core kernel -> architecture interface
and should have a leading prefix z_arch_.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Global variables related to timing information have been
renamed to be prefixed with z_arch, with naming arranged
in increasing order of specificity.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
ACPI is predominantly x86, and only currently implemented on x86,
but it is employed on other architectures, so rename accordingly.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Simple naming change, since MULTIBOOT is clear enough by itself and
"namespacing" it to X86 is unnecessary and/or inappropriate.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
x86 has more complex memory maps than most Zephyr targets. A mechanism
is introduced here to manage such a map, and some methods are provided
to populate it (e.g., Multiboot).
The x86_info tool is extended to display memory map data.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Originally, the multiboot info struct was copied in the early assembly
language code. This code is moved to a C function in multiboot.c for
two reasons:
1. It's about to get more complicated, as we want the ability to use
a multiboot-provided memory map if available, and
2. this will faciliate its sharing between 32- and 64-bit subarches.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Implement a simple ACPI parser with enough functionality to
enumerate CPU cores and determine their local APIC IDs.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
* In ARC, pop reg ==> sp=sp-4; *sp= b; The original codes have bug that
the save of ilink (st ilink [sp]) will crash the interruptted stack's
content. This commit fixes this bug and makes the codes easier to
understand
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Various C and Assembly modules
make function calls to z_sys_trace_*. These merely call
corresponding functions sys_trace_*. This commit
is to simplify these by making direct function calls
to the sys_trace_* functions from these modules.
Subsequently, the z_sys_trace_* functions are removed.
Signed-off-by: Mrinal Sen <msen@oticon.com>
- Remove redundant inclusions in irq_init.c
- Remove comment about thread_abort function,
which does not belong in this file (probably
left-out during code refactoring)
- Include arm cmsis.h only under #ifdef CONFIG_ARM
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This used to be part of the "restore always" set of registers because
__swap was expected to return a value. No longer required, so RAX is
moved to the volatile registers and we save a few cycles occasionally.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
A space is allocated in the TSS for per-CPU variables. At present,
this is only a 'struct _cpu *' to find the _kernel CPU struct. The
locore routines are rewritten to find _current and _nested via this
pointer rather than referencing the _kernel global directly.
This is obviously in preparation for SMP support.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This function call was erroneously inserted between the instruction
that set the Z flag and the instruction that tested the Z flag. The
call is moved up a few instructions where it can't junk CPU state.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Declare the 64-bit TSS as a struct, and define the instance in C.
Add a data segment selector that overlaps the TSS and keep that
loaded in GS so we can access the TSS via a segment-override prefix.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This is moved from arch/x86/include/ia32/kernel_arch_func.h to the
common header arch/x86/include/kernel_arch_func.h so it can be shared.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This is largely a conceptual change rather than an actual change.
Instead of using an array of interrupt stacks (one for each IRQ
nesting level), we use one interrupt stack and subdivide it. The
effect is the same, but this is more in line with the Zephyr model
of one ISR stack per CPU (as reflected in init.c).
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Like its 32-bit sibling, the 64-bit code should EOI inline rather than
invoking a function. Defeats the performance advantages of x2APIC.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The boot time measurement sample was giving bogus values on x86: an
assumption was made that the system timer is in sync with the CPU TSC,
which is not the case on most x86 boards.
Boot time measurements are no longer permitted unless the timer source
is the local APIC. To avoid issues of TSC scaling, the startup datum
has been forced to 0, which is in line with the ARM implementation
(which is the only other platform which supports this feature).
Cleanups along the way:
As the datum is now assumed zero, some variables are removed and
calculations simplified. The global variables involved in boot time
measurements are moved to the kernel.h header rather than being
redeclared in every place they are referenced. Since none of the
measurements actually use 64-bit precision, the samples are reduced
to 32-bit quantities.
In addition, this feature has been enabled in long mode.
Fixes: #19144
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
There are not enough bits in k_thread.thread_state with SMP enabled,
and the field is (should be) private to the scheduler, anyway. So
move state bits to the _thread_arch where they belong.
While we're at it, refactor some offset data w/r/t _thread_arch
because it can be shared between 32- and 64-bit subarches.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
k_thread.thread_state (or rather, _thread_base.thread_state) should be
private to the kernel/scheduler, so flags previously stored there are
moved to _thread_arch where the belong.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
when enable CONFIG_CUSTOM_SECTION_ALIGN, it need less alignment
memory for image rom region. But that needs carefully configure
MPU region and sub-regions(ARMv7-M) to cover this feature.
Fixes: #17337.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
The GNU ARM Embedded "8-2019-q3-update" toolchain
erroneously uses "typeof" instead of "__typeof__".
To work around this we define typeof to be able to
support it.
This reverts commit 01a71eae3d.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We don't need to save the ABI caller-save registers here, because
we don't preempt threads from nested IRQ contexts.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This is a naive implementation which does "eager" context switching
for floating-point context, which, of course, introduces performance
concerns. Other approaches have security concerns, SMP implications,
and impact the x86 arch and Zephyr project as a whole. Discussion is
needed, so punting with the straightforward solution for now.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Fleshed out z_arch_esf_t and added code to build this frame when
exceptions occur. Created a separate small stack for exceptions and
shifted the initialization code to use this instead of the IRQ stack.
Moved IRQ stack(s) to irq.c.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The IRQ_OFFLOAD_VECTOR config option is also moved to the arch level,
as it is shared between both 32- and 64-bit subarches.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Using the arch Kconfig here, instead of kernel/Kconfig. Intel64 with
the SysV ABI requires some pretty big stacks. These 4K-8K defaults
are arguably a bit small, but the Zephyr defaults are REALLY too small.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
First "complete" version of Intel64 support for x86. Compilation of
apps for supported boards (read: up_squared) with CONFIG_X86_LONGMODE=y
is now working. Booting, device drivers, interrupts, scheduling, etc.
appear to be functioning properly. Beware that this is ALHPA quality,
not ready for production use, but the port has advanced far enough that
it's time to start working through the test suite and samples, fleshing
out any missing features, and squashing bugs.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Widen the integer to pointer size before conversion, to make
explicit the intent (and silence the compiler warning). Also
fix a minor bug involving a duplicate (and thus dead) store.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This patch adds basic build infrastructure, definitions, a linker
script, etc. to use the Zephyr and 0.10.1 SDK to build a 64-bit
ELF binary suitable for use with GRUB to minimally bootstrap an
Apollo Lake (e.g., UpSquared) board. The resulting binary can hardly
be called a Zephyr kernel as it is lacking most of the glue logic,
but it is a starting point to flesh those out in the x86 tree.
The "kernel" builds with a few harmless warnings, both with GCC from
the Zephyr SDK and with ICC (which is currently being worked on in
a separate branch). These warnings are either related to pointer size
differences (since this is an LP64 build) and/or dummy functions
that will be replaced with working versions shortly.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Use different headers for kernel_arch_{func,thread}.h when in
CONFIG_X86_LONGMODE, and add placeholders for Intel64 versions.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Some definitions may be shared between subarchitectures, so refactor
accordingly. The definitions are also modified to separate bits. A
placeholder is created for the Intel64 definitions.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The IA32 and Intel64 subarchitectures will generate different offset
symbols, so they are refactored. No functional change.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The _irq_to_interrupt_vector[] array shouldn't be accessed directly,
as there is a macro for this.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Convert how we get the various chosen properties like "zephyr,console"
to use the new kconfig functions like dt_chosen_to_label.
Because of how kconfig parses things we define a set of variables of the
form DT_CHOSEN_Z_<PROP> since comma's are parsed as field seperators in
macros.
This conversion allows us to remove code in gen_defines.py for the
following chosen properties:
zephyr,console
zephyr,shell-uart
zephyr,bt-uart
zephyr,uart-pipe
zephyr,bt-mon-uart
zephyr,uart-mcumgr
zephyr,bt-c2h-uart
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We re-wrote the xtensa arch code, but never got around
to purging the old implementation.
Removed those boards which hadn't been moved to the new
arch code. These were all xt-sim simulator targets and not
real hardware.
Fixes: #18138
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
From the Jailhouse days, this has been a function call. That's silly.
We now inline the EOI in the ISR when in x2APIC mode. Also clean up
z_irq_controller_eoi(), so it now uses the inline macros.
Also, we now enable x2APIC on up_squared by default.
Fixes: #17133
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Use enumerate() to fix this pylint warning:
C0200: Consider using enumerate instead of iterating with range and
len (consider-using-enumerate)
enumerate() is handy when the loop body needs both the element and its
index. It returns (index, element) tuples.
Also use a tuple unpacking to extract 'handler' from the elements in
'vector'.
Piggyback a slightly simpler way to build a list of num_chars 0s.
Getting rid of warnings for a CI check.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Accidentally passed two arguments instead of one. Fixes this pylint
error:
arch/x86/gen_idt.py:132:8: E1121: Too many positional arguments for
function call (too-many-function-args)
Fixing pylint warning for a CI check.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix this warning, as a preparation for a CI check:
arch/common/gen_isr_tables.py:167:11: C0123: Using type() instead of
isinstance() for a typecheck. (unidiomatic-typecheck)
isinstance() has the advantage that it also handles inheritance, though
it doesn't really matter here. It's more common at least.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Getting slightly subjective, but fixes this pylint warning:
arch/x86/gen_idt.py:281:11: R1714: Consider merging these
comparisons with "in" to 'handler not in (spur_code, spur_nocode)'
(consider-using-in)
Getting rid of pylint warnings for a CI check. I could disable any
controversial ones (it's already a list of warnings to enable anyway).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Promote a handy and often-overlooked sys.exit() feature: Passing it a
string (or any other non-int object) prints it to stderr and exits with
status 1.
See the documentation at
https://docs.python.org/3/library/sys.html#sys.exit.
This indirectly prints some errors to stderr that previously went to
stdout.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This adds a simple infinite loop when double exception is raised.
Without this, if double exception occurs, it would execute
arbitrary code.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This follows the z_arch_irq_en-/dis-able() so that the SoC
definitions are responsible for functions related to multi-level
interrupts.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Currently, the interrupt service code manually raises the CPU task
priority to the priority level of the vector being serviced to defer
any lower-priority interrupts. This is unnecessary; the local APIC
is aware that an interrupt is in-service and accounts for its priority
when deciding whether to issue an overriding interrupt to the CPU.
Signed-off-by: Charles E. Youse <charles@gnuless.org>
Use the 'not in' operator. Fixes this pylint warning:
arch/xtensa/core/xtensa_intgen.py:77:7: C0113: Consider changing
"not lvl in ints_by_lvl" to "lvl not in ints_by_lvl" (unneeded-not)
Fixing pylint warnings for a CI check.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Reported by pylint's 'bad-whitespace' warning.
Not gonna enable this warning in the CI check, because it flags stuff
like deliberately aligning assignments and gets too cultish. Just a
cleanup pass.
For whatever reason, the common convention in Python is to skip spaces
around '=' when passing keyword arguments and giving default arguments:
f(x=3, y=4)
def f(x, y=8):
...
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The code in question is very non-trivial so without good explanation
it takes a lot of time to realize what's done there and why
it still works in the end.
Here I'm trying to save a couple of man-days for the next developers
who's going to touch that piece of code.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
This commit makes it possible to infer Z_ARCH_EXCEPT()
calls in SVCs that escalate to HardFault due to being
invoked from priority level equal or higher to the
interrupt priority level of the SVC Handler.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
commit 780324b8ed ("cleanup: rename fiber/task -> thread")
seems to be done by a script and in that particular case turned
menaingful sentence into nonsense. Alas, threads might be in all
four states.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anas Nashif <anas.nashif@intel.com>
We manage IRQs in a quite a different way now since
commit f8d061faf7 ("arch: arc: add nested interrupt support")
so that comment not only makes no sense but also may fool a reader
as disabling of interrupts happens in the very beginning of
_rirq_exit() but not here.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
we should not rely on that eret has a copy of ilink in fast
irq handling. This will cause crash for hs cores.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
For the old codes, if nest interrupts come out after _isr_wrapper
and before _check_nest_int_by_irq_act, then multi-bits in irq_act
will be set, this will result irq stack will not be switched in
correctly
As a fix, it's still need to use nest interrupt counter to do
interrupt stack switch as before
The difference is in the past exc_nest_count is used, but here
_kernel.nested/_kernel.cpus[cpu_id].nested is used.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* in arc secureshield interrupts can be configured
as secure or normal
* in sw design, high interrupt priorites are allocated to
secure world, low priorities are allocated to normal world.
* secure interrupt > secure thread > normal interrupt > normal
thead
So, here secure world/firmware only checks secure interrupt
priorities
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
it's not allowed to switch to thread preempted by exception as
its context is not saved.
So if a thread switch is required in exception handling, e.g.
kill a thread, the old thread cannot be switched back
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
For arc processor equiped with secureshield, SEC_STAT.IRM
bit should be recorded, it determins which mode irq should
return
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Set the recommended thread stack size to 40 bytes in case a build is
made for a 64-bit native posix board
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Update the xtensa backend to work better with the new fatal error
architecture. Move the stack frame dump (xtensa uses a variable-size
frame becuase we don't spill unused register windows, so it doesn't
strictly have an ESF struct) into z_xtensa_fatal_error(). Unify the
older exception logging with the newer one (they'd been sort of glomed
together in the recent rework), mostly using the asm2 code but with
the exception cause stringification and the PS register field
extraction from the older one.
Note that one shortcoming is that the way the dispatch code works, we
don't have access to the spilled frame from within the spurious error
handler, so this can't log the interrupted CPU state. This isn't
fixable easily without adding overhead to every interrupt entry, so it
needs to stay the way it is for now. Longer term we could exract the
caller frame from the window state and figure it out with some
elaborate assembly, I guess.
Fixes#18140
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
It was discovered that the xtensa version of
z_arch_irq_connect_dynamic() was being removed along with the old
xtensa architecture support, because it was never included in the asm2
builds.
But there's no xtensa-specific code in it at all. Architectures that
use the existing sw_isr_table mechanism and don't (or can't, in the
case of xtensa which has fixed interrupt priority) interpret the other
parameters might as well have access to a working generic
implementation.
Fixes#18272
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Remove extern "C" support from files that don't declare objects or
functions.
In arch/arc/arch.h the extern "C" in the including context is left
active during an include to avoid more complex restructuring.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Remove extern "C" support from files that don't declare objects or
functions.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
In arch.h the extern "C" in the including context is left active during
include of target-specific mpu headers to avoid more complex
restructuring.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
'recoverable' is a value passed by reference and we
should be dereferencing the pointer, to check if the
fault has been classified as recoverable.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Remove extern "C" support from files that don't declare objects or
functions.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
SR and LR were used as global names for load and store RISC-V assembler
operations, colliding with other uses such as SR for STATUS REGISTER in
some peripherals. Renamed them to a longer more specific name to avoid
the collision.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
When coming out of an exception, we need to mask interrupts
to avoid races when decrementing the nested count. Move
the instruction that does this earlier.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Related to #17997, for the POSIX arch:
* Remove some unnecessary extern "C" and ifdef blocks
* Move an include out of one of these blocks
* Add a missing extern "C" block
Background:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
* it's based on ARC SecureShield
* add basic secure service in arch/arc/core/secureshield
* necesssary changes in arch level
* thread switch
* irq/exception handling
* initialization
* add secure time support
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
according to high-level design,in user mode software-triggered system
fatal exceptions only allow oops and stack check failure
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
exception, different with irq offload, may be raised interrupt
handling, e.g.
* z_check_stack_sentinel
* wrong code
we need to add specific handling of this case in exception handling
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
after appling the new "_get_curr_cpu_irq_stack" in _exc_entry,
the caculation of exception stack is wrong, this will
cause stack overflow, make the exception handling corrupt.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This commit enables the option to route the BusFault,
HardFault, and NMI exceptions in Secure state, when
building for Cortex-M CPUs with ARM_SECURE_FIRMWARE=y.
This allows the various test to utilize BusFault,
HardFault and NMI exceptions during testing.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For now we enforce the medany code model for 64-bit builds as we get
reloc issues otherwise. The instruction set and ABI are also set to
soft-float usage.
The ilp32 ABI is explicitly specified on 32-bit build to make sure
it is not using a wrong default if the same toolchain is used for both
32- and 64-bit builds. The archittecture options are the same as the
SDK's riscv32 toolchain default in that case.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Since commit c535300539 ("drivers/timer: New ARM SysTick driver"),
_NanoIdleValGet and _NanoIdleValClear have been unused.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Assembly language start code will enter here, which sets up
early kernel initialization and then calls z_cstart() when
finished.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Removes very complex boot-time generation of page tables
with a much simpler runtime generation of them at bootup.
For those x86 boards that enable the MMU in the defconfig,
set the number of page pool pages appropriately.
The MMU_RUNTIME_* flags have been removed. They were an
artifact of the old page table generation and did not
correspond to any hardware state.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* modify the reset flow for SMP
* add smp related initialization
* implement ipi related functions
* implement thread switch in isr/exception
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* arc connect is a component to connect multiple arc cores
* it's necessary for arc smp support
* the following features are implemented
* inter-core interrupt unit
* gloabl free running counter
* inter-core debug unit
* interrupt distribute unit
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Makes the code that defines stacks, and code referencing
areas within the stack object, much clearer.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Previously, context switching on x86 with memory protection
enabled involved walking the page tables, de-configuring all
the partitions in the outgoing thread's memory domain, and
then configuring all the partitions in the incoming thread's
domain, on a global set of page tables.
We now have a much faster design. Each thread has reserved in
its stack object a number of pages to store page directories
and page tables pertaining to the system RAM area. Each
thread also has a toplevel PDPT which is configured to use
the per-thread tables for system RAM, and the global tables
for the rest of the address space.
The result of this is on context switch, at most we just have
to update the CR3 register to the incoming thread's PDPT.
The x86_mmu_api test was making too many assumptions and has
been adjusted to work with the new design.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The current API was assuming too much, in that it expected that
arch-specific memory domain configuration is only maintained
in some global area, and updates to domains that are not currently
active have no effect.
This was true when all memory domain state was tracked in page
tables or MPU registers, but no longer works when arch-specific
memory management information is stored in thread-specific areas.
This is needed for: #13441#13074#15135
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These turned out to be quite useful when debugging MMU
issues, commit them to the tree. The output format is
virtually the same as gen_mmu_x86.py's verbose output.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Currently page tables have to be re-computed in
an expensive operation on context switch. Here we
reserve some room in the page tables such that
we can have per-thread page table data, which will
be much simpler to update on context switch at
the expense of memory.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Has the same effect of catching stack overflows, but
makes debugging with GDB simpler since we won't get
errors when inspecting such regions. Making these
areas non-present was more than we needed, read-only
is sufficient.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There are two aspects to this: CPU registers are twice as big, and the
load and store instructions must use the 'd' suffix instead of the 'w'
one. To abstract register differences, we simply use a ulong_t instead
of u32_t given that RISC-V is either ILP32 or LP64. And the relevant
lw/sw instructions are replaced by LR/SR (load/store register) that get
defined as either lw/sw or ld/sd. Finally a few constants to deal with
register offsets are also provided.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
With the upcoming riscv64 support, it is best to use "riscv" as the
subdirectory name and common symbols as riscv32 and riscv64 support
code is almost identical. Then later decide whether 32-bit or 64-bit
compilation is wanted.
Redirects for the web documentation are also included.
Then zephyrbot complained about this:
"
New files added that are not covered in CODEOWNERS:
dts/riscv/microsemi-miv.dtsi
dts/riscv/riscv32-fe310.dtsi
Please add one or more entries in the CODEOWNERS file to cover
those files
"
So I assigned them to those who created them. Feel free to readjust
as necessary.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The ARM specific _impl_k_thread_abort function only applies to Cortex-M
so move it to the cortex_m specific directory.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Adapted from similar code in the x86_64 port.
Useful when debugging boot problems on actual x86
hardware if a JTAG isn't handy or feasible.
Turn this on for qemu_x86.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* when fpu is configured or mpy_option > 6,
accl regs (r58, r59) will be configured,
they are used by fpu and mac, and are caller
-saved scratch regs, so need to be saved before
jumping to interrupt handlers
* r25 and r30 are also caller-saved scratch reg.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
for arc, floating point support cannot be enabled
automatically, so k_float_enable is requred.
z_arch_float_enable is for k_float_enable
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
The ARC HS is a family of high performance CPUs from Synopsys
capable of running wide range of applications from heavy DPS
calculation to full-scale OS.
Still as with other ARC cores ARC HS might be tailored to
a particular application.
As opposed to EM cores ARC HS cores always have support of unaligned
data access and by default GCC generates such a data layout with
so we have to always enable unaligned data access in runtime otherwise
on attempt to access such data we'd see "Unaligned memory exception".
Note we had to explicitly mention CONFIG_CPU_ARCEM=y in
all current defconfigs as CPU_ARC{EM|HS} are now parts of a
choice so we cannot simply select ether option in board's Kconfig.
And while at it change "-mmpy-option" of ARC EM to "wlh1"
which is the same as previously used "6" but matches
Programmer's Reference Manual (PRM) and is more human-friendly.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
ARCv2 cores may access data not aligned by the data size boundary.
I.e. read entire 32-bit word from address 0x1.
This feature is configurable for ARC EM cores excluding those with
secure shield 2+2 mode. When it's available in hardware it's required
to enable that feature in run-time as well setting status32.AD bit.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
KFLAG instruction might affect multiple flags in STATUS32 register
and so when we need just AE-bit to be reset we need first read current
state of STATUS32, then change our bit and set STATUS32 again.
Otherwise critical flags including stack checking, unaligned access etc
will be dropped for good.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Up until now only ARC EM family has been supported in Zephyr
which don't support atomic operations other than
compare-and-excange, so custom atomic ops with load-locked(LLOCK)/
store-conditional(SCOND) were never used that's how we never
realised CONFIG_ATOMIC_OPERATIONS_CUSTOM points to the wrong file:
"atomic.c" while real implementation is in "atomic.S".
Fix that now.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
It looks like, at some point in the past, initializing thread stacks
was the responsibility of the arch layer. After that was centralized,
we forgot to remove the related conditional header inclusion. Fixed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
* use IRQ_ACT to check nest interrupt
* implement an asm macro for nest interrupt check
* no need to use exc_nest_count, remove it
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* do not use a specific variable (saved_r0/saved_sp) to free r0
/exchange sp, but use stack to do that.
* it will make code scalable, e.g. for SMP, no need to define
variables for each core
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* as ilink has a copy in ERET, it can be reused as a gp
* use ilink to do the job of arc_exc_saved_sp to save 4 bytes
and save some cycles because no load/store of memory
* it will make code scalable, e.g. for SMP, no need to
define variables for each core
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
User mode is only allowed to induce oopses and stack check
failures via software-triggered system fatal exceptions. This
commit forces a kernel oops if any other fatal exception reason
is enforced.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This is now called z_arch_esf_t, conforming to our naming
convention.
This needs to remain a typedef due to how our offset generation
header mechanism works.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We had a function that did this, but it was dead code.
Move to fatal.c and call from z_arm_fatal_error().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We introduce a new z_fatal_print() API and replace all
occurrences of exception handling code to use it.
This routes messages to the logging subsystem if enabled.
Otherwise, messages are sent to printk().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* z_NanoFatalErrorHandler() is now moved to common kernel code
and renamed z_fatal_error(). Arches dump arch-specific info
before calling.
* z_SysFatalErrorHandler() is now moved to common kernel code
and renamed k_sys_fatal_error_handler(). It is now much simpler;
the default policy is simply to lock interrupts and halt the system.
If an implementation of this function returns, then the currently
running thread is aborted.
* New arch-specific APIs introduced:
- z_arch_system_halt() simply powers off or halts the system.
* We now have a standard set of fatal exception reason codes,
namespaced under K_ERR_*
* CONFIG_SIMPLE_FATAL_ERROR_HANDLER deleted
* LOG_PANIC() calls moved to k_sys_fatal_error_handler()
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We are standardizing to a arch-independent set of exception
reason codes, don't overload it with internal state of
the ARM fault handling code.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
sw_isr_table has two entries, an argument and an ISR function. The
comment on struct _isr_table_entry in include/sw_isr_table.h says that
"This allows a table entry to be loaded [...] with one ldmia
instruction, on ARM [...]". Some arch, e.g. SPARC, also has a double
word load instruction, "ldd", but the instruct must have address align
to double word or 8 bytes.
This commit makes the table alignment configurable. It allows each
architecture to specify it, if needed. The default value is 0 for no
alignment.
Signed-off-by: Yasushi SHOJI <y-shoji@ispace-inc.com>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Fix a race which seems to have been presenting itself
very sporadically on loaded systems.
The race seems to have caused tests/kernel/sched/schedule_api
to fail at random on native_posix.
The case is a bit convoluted:
When the kernel calls z_new_thread(), the POSIX arch saves
the new thread entry call in that new Zephyr thread stack
together with a bit of extra info for the POSIX arch.
And spawns a new pthread (posix_thread_starter()) which
will eventually (after the Zephyr kernel swapped to it),
call that entry function.
(Note that in principle a thread spawned by pthreads may
be arbitrarily delayed)
The POSIX arch does not try to synchronize to that new
pthread (because why should it) until the first time the
Zephyr kernel tries to swap to that thread.
But, the kernel may never try to swap to it.
And therefore that thread's posix_thread_starter() may never
have got to run before the thread was aborted, and its
Zephyr stack reused for something else by the Zephyr app.
As posix_thread_starter() was relaying on looking into that
thread stack, it may now be looking into another thread stack
or anything else.
So, this commit fixes it by having posix_thread_starter()
get the input it always needs not from the Zephyr stack,
but from its own pthread_create() parameter pointing to a
structure kept by the POSIX arch.
Note that if the thread was aborted before reaching that point
posix_thread_starter() will NOT call the Zephyr thread entry
function, but just cleanup.
With this change all "asynchronous" parts of the POSIX arch
should relay only on the POSIX arch own structures.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Qemu is already updated past 2.9 release, so this
workaround for QEMU_CORTEX_M3 is now obsolete and
can be removed.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Before, attempting to induce a kernel oops would instead
lead to a general protection fault as the interrupt vector
was at DPL=0.
Now we allow by setting DPL=3. We restrict the allowable
reason codes to either stack overflows or kernel oops; we
don't want user mode to be able to create a kernel panic,
or fake some other kind of exception.
Fixes an issue where the stack canary test case was triggering
a GPF instead of a stack check exception on x86.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We need to pass -m64 instead of -m32 when CONFIG_64BIT is set.
This is pretty x86 centric. Many platforms don't have the ability
to select between 32-bits or 64-bits builds and either of those should
be dropped in that case with restriction on the available configuration
done elsewhere. But for the time being this allows for testing both.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Correct the storage type of the thread status pointer
not assuming 32bit pointer and integer size
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
For the x86 architecture the z_arch_float_disable() is only
implemented when building with CONFIG_LAZY_FP_SHARING, so we
make z_arch_float_disable() return -ENOSYS when we build with
FLOAT and FP_SHARING but on an x86 platform where
LAZY_FP_SHARING is not supported.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The current version is 32-bit specific, so move it to ia32/
and add a layer of indirection via an arch-level header file.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Refactoring 32- and 64-bit subarchitectures, so this file is moved
to ia32/ and a new "redirector" header file is introduced.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This data is subarchitecture-specific, so move it to ia32/
and add a layer of indirection at the architecture level.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Some of this is 32-bit specific, some applies to all subarchitectures.
A preliminary attempt is made to refactor and place 32-bit-specific
portions in ia32/kernel_arch_data.h.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This file merely declares external functions referenced only
by ia32/cache.c, so the declarations are inlined instead.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This file was used to generate offsets for host tools that are no
longer in use, so it's removed and the offsets are no longer generated.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
