add the nucleo_C071rb overlay file and enable different types of timers
that support counters.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Add test support for Counter driver of RZ/G3S-SMARC
Signed-off-by: Hieu Nguyen <hieu.nguyen.ym@bp.renesas.com>
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
Changes introduced in 293b9a16ca didn't
verify correct behaviour when running `TIMER1` with `TIMER0` is paused,
and was reporting the wrong tick counter being incremented. Correct this
and extend the testing to verify correct behaviour.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
Rename the following properties in binding and overlay:
-- primary_source => primary-source
-- secondary_source => secondary-source
-- filter_count => filter-count
-- filter_period => filter-period
Signed-off-by: James Roy <rruuaanng@outlook.com>
Convert qspi and hyperflash to variants instead of revisions by popular
demand.
And convert evkb into a revision instead of a different board.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Clock source is changed from RC_SLOW to RC_FAST_D256 in order
to improve clock precision and avoid tests failing due to
lower precision of RC clock (around 10%).
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
A bunch of copy-paste mistakes when adding the nRF54L15 DK added stale
references to the Preview DK (PDK).
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In the test scenario without alarms, it might
be the case that counter is already running and
it will not match the expected tick.
This adds a tick offset into the expected value
based on current counter reading.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Some counter drivers do not support alarms, so I added testcase which
starts the counter, checks if the value is in range after certain time and
stops the counter, to check if the counter is running correctly.
Signed-off-by: Krystof Sadlik <krystof.sadlik@nxp.com>
Co-authored-by: Michal Smola <michal.smola@nxp.com>
This reverts commit 331442f059.
Change was introduced because it was failing on slow core
(nrf54h20/cpuppr) however it turned out that there was a bug in the
driver and now test passes without this tweak which make the test
last twice longer.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Move samples config files from 'boards' to 'socs' in order to
remove multiple files with the same configuration and render
available samples for new boards. Only changed sample files
which are not board or hardware specific.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Increase the counter timer prescaler for some instances of NXP System
Timer Module, so that late alarms and short relative alarms are
excercised.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Convert NXP System Timer Module driver to a native driver.
Timer prescaler in tests is updated because short relative alarms
sometimes give false positives.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Rework configuration so that it does not require special treatment
in testcase.yaml.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
`checkpatch.pl` requires that dts sources are indented with tabs,
fix all the spaces that slipped in while checkpatch wasn't watching.
Signed-off-by: Jordan Yates <jordan@embeint.com>
When running this test with multiple counter instances enabled that
support different capabilities, if one of the instances does not
support the test required capabilities, the test will be
immediately skipped not giving the chance to run to the subsequent
instances.
Fix this by marking the test as skipped, only of all counter instances
under test were skipped.
Fixes#74358
Signed-off-by: Manuel Argüelles <marguelles.dev@gmail.com>
This commit adds a missing #ifdef check which prevents building the
'counter_basic_api' test for boards under the following conditions:
* RTC node is defined in device tree (compatible = "st,stm32-rtc")
* RTC node is disabled in device tree (status = "disabled")
* Kconfig "CONFIG_COUNTER_RTC_STM32=n" is specified
This check matches the ones done a few lines above for NXP MCUs.
Without this check, building the test under the conditions listed above
failed with the infamous `undefined reference to '__device_dts_ord_N'`
linker error, because the test attempts to obtain RTC's `struct device`
despite CONFIG_COUNTER_RTC_STM32=n, which ultimately fails because the
RTC driver is not built unless there is an enabled RTC node in DT.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Add google_dragonclaw board definition and allow running the
drivers.counter.basic_api.stm32_subsec test on the board.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
