Lookup the address of the SNTP server through DNS instead of requiring
a server to be running locally.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Networking events may have been triggered before `wait_for_network` was
called. Resend the status events after the callbacks have been
registered.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Add a variant of the SNTP API that does not block while waiting for a
response from the SNTP server. Instead it takes advantage of
`CONFIG_NET_SOCKETS_SERVICE` to read the response asynchronously when
the response is received.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Extract the SNTP query send logic out of `sntp_query` so that it can be
used by functions that don't synchronously wait for the response.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The MAX14915 has eight high-side switches specified to deliver up to
700mA continuous current with simlar register map and diagnostics
parameters to MAX14916.
Documentation:
https://www.analog.com/en/products/max14915.html
Signed-off-by: Robert Budai <robert.budai@analog.com>
It shouldn't be possible to just 'enable' target mode of a device.
It is required by the specification to perform a handoff or request to
become a target or controller from the active controller. Not to just flip
a switch internally. Can the parameter from `enable` to `enabled` to report
if it is currently a target or a controller otherwise.
Also, add inline helpers for `i3c_config_get` and `i3c_configure` to ensure
the proper struct is passed in.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
Add test configuration on DMIC nodes that are compatible
with 'nordic_nrf_pdm'.
Add missing DTS definitions in a board overlay.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Incremental refactoring.
Fix PEP8 issues to make ruff green for config_parser.py module.
Add __init__.py to twister directory to make it a proper python package,
and make modules importable.
Signed-off-by: Lukasz Fundakowski <lukasz.fundakowski@nordicsemi.no>
The AM64x has two I2C interfaces located in the MCU domain and
uses mailbox6 to communicate with the A53 cores.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Add HCI IPC retry handling in case of full IPC
queue. This mechanism improves reliability.
The ipc_service_send can return -ENOMEM in case
of full queue. If this happens the retries are
executed in order to wait for queue to empty
and not drop messages.
If the retry mechanism reaches maximum then
the error code is passed back to the host.
The change should improve the handling of
passing messages to full ipc and reduce
dropping of packets.
Signed-off-by: Dominik Chat <dominik.chat@nordicsemi.no>
This board does not have Flash support enabled yet.
Re-enable this sample once Flash and MCUboot support is
added.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
This driver is no longer maintained. So remove the
error condition to have a build error for undefined
platforms.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
When a TCP connection is refused during zsock_connect, errno is set
to -ENOTCONN, but errno should be set to -ECONNREFUSED. This change
causes the ECONNREFUSED status to be propagated from tcp_in to
net_tcp_connect, which eventually causes errno to be set
to -ECONNREFUSED.
Signed-off-by: Noah Olson <noah@wavelynx.com>
Fixes test failures on up_squared caused by ACPI adding to
heap size (K_HEAP_MEM_POOL_SIZE). The test assumed the heap size
always matched the Kconfig CONFIG_HEAP_MEM_POOL_SIZE=256.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Allow to set attribute of the measurement rate of the apds9253. This
must be done setting the sampling frequency (in Hz).
Signed-off-by: Margherita Milani <margherita.milani@amarulasolutions.com>
Allow to set attribute of the gain of the apds9253. The gain
is applied to all the channels.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Margherita <margherita.milani@amarulasolutions.com>
`watchdog_start_tick` is a just wrapper for `tick_start`.
To simplify, changing it to call directly.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
In order to support new toolchains that are not compatible with
gcc/clang (e.g., IAR), we need to add a level of indirection for
the name of warnings.
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
For the CCM mode, increase slightly the output buffer size because
the cc23x0 directly fills this buffer with 16-byte blocks.
This prevents from doing unnecessary memcpy that would have an
impact on the driver's performance.
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Add support for AES module to cc23x0 SoC. The driver supports the
following modes:
- ECB encryption only (since decryption is not supported by the HW)
- CTR
- CCM
Signed-off-by: Stoyan Bogdanov <sbogdanov@baylibre.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Added option to retry message send over ipc when for example
there is -ENOMEM error (shared memory buffer full).
Number of max retries and delay between them are Kconfigs.
Fixed nrfs error reporting when sending directly over
ipc service, status was not correct when negative value
was returned from ipc service send function.
Signed-off-by: Łukasz Stępnicki <lukasz.stepnicki@nordicsemi.no>
Add a Kconfig BT_LIMITED_DISCOVERABLE_DURATION to set the timeout for
limited discoverable mode.
Add a argument `limited` to function `bt_br_set_discoverable()` to
support the limited discoverable mode.
When enabling discoverable mode with `limited` is true, both write
LIAC and GIAC to controller and set the bit 13 of COD in function
`bt_br_set_discoverable()`. And start a delay worker with the timeout
CONFIG_BT_LIMITED_DISCOVERABLE_DURATION to disable the discoverable
mode.
When disabling discoverable mode, only set GIAC to controller and
clear bit 13 of COD.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Use `k_sem_take(,K_FOREVER)` in the main thread to keep it sleeping
while worker threads are running. The last worker thread to finish
calculation wakes up the main thread.
Signed-off-by: William Tambe <williamt@cadence.com>
Modify the Cortex-M SysTick driver to work when the SoC resets SysTick
in low-power mode. This adds an invisible Kconfig symbol that must be
selected by SoCs with such behavior.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
