Add overlays required to run watchdog sample on:
- nrf54l09pdk/nrf54l09/cpuapp,
- nrf54l09pdk/nrf54l09/cpuflpr,
- nrf54l20pdk/nrf54l20/cpuflpr.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
The ADC and watchdog samples are not currently supported for the
non secure target of the nRF54L15 DK.
Add exclusions for these until they are supported.
Signed-off-by: Georgios Vasilakis <georgios.vasilakis@nordicsemi.no>
refactoring enable function into enable and disable increasing readability
and increasing coherence with other stepper apis in terms of
nomenclature
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
Use the `arduino,uno-adc` mapping to change the settings
to make it easier to understand.
Add available A4 and A5 pins.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
The mbox sample uses bellboard events enabled by default
in the nRF54H20dk board definition.
Thus, it's not easily obvious that IRQ bitmask must be aligned
when other mbox/bellboard channel is used.
Add comment to the nRF54H20 overlays.
Inform that bellboard channel used for RX must be enabled in
the 'nordic,interrupt-mapping' property.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Remove the support of the Nucleo WBA52CG board since it is NRND
(Not Recommended for New Design) and it is not supported anymore
in the STM32CubeWBA from version 1.1.0 (July 2023).
Signed-off-by: Nidhal BEN OTHMEN <nidhal.benothmen@st.com>
In 9d7ee123a5
the regex used to verify the sample is doing what it should was changed
in a way in which it cannot possibly pass.
Let's fix it.
While at it, in the same commit, the simulator version of the test was
merged with the real_hw version, but the test name kept "real_hw" which
is now missleading => let's fix it.
And let's set as integration platform the simulated target, so it
can actually be runtime tested in CI.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add support to work with the LCD-PAR-S035 display
that is connected over the PMOD interface.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Adds zephyr:board and zephyr:board-supported-hw directives to the
Arduino docs in order to generate more of the boards' documentation
automatically.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The Adafruit Feather ESP32S3 is a development board in the Feather
standard layout, sharing peripheral placement with other devices labeled
as Feathers or FeatherWings. The board is equipped with an ESP32-S3 mini
module, a lithium ion battery charger and a USB-C connector.
Signed-off-by: Leon Rinkel <leon@rinkel.me>
Rename the driver from uart_native_posix to uart_native_pty.
Including renaming the DTS compatible, and kconfig options, deprecating
the old ones.
And refactor the driver, generalizing it, so we can have any number of
instances.
Note that, unfortunately generalizing to N instances cannot be done
without a degree of backwards compatibility breakage: This driver was
born with all its configuration and selection of the instances based on
kconfig.
When the driver was made to use DT, it was done in a way that required
both DT and kconfig needing to manually coherently enable the 2nd UART.
This has now been fixed, which it means only DT is used to decide how
many instances are avaliable, and UART_NATIVE_POSIX_PORT_1_ENABLE is
just ignored.
Including:
* Deprecate UART_NATIVE_WAIT_PTS_READY_ENABLE: the options is always on
now as it has no practical drawbacks.
* Deprecate UART_NATIVE_POSIX_PORT_1_ENABLE: DTS intanciation defines it
being available now.
* Rename a few functions and in general shorten pseudo-tty/pseudo-
terminal to PTY instead of PTTY.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Pinoroni Pico Plus2 is an RP2350B based board that has
more rich I/O, RAM, and Flash than the original Raspberry Pi Pico2.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Including renaming the DTS binding and kconfig options
deprecating the old one.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
A macro introduced allows to log four-character-codes (FOURCC) as one
string instead of enumerating each individual character. This saves a bit
of room in the code and is less error-prone.
Signed-off-by: Josuah Demangeon <me@josuah.net>
For the CCM mode, increase slightly the output buffer size because
the cc23x0 directly fills this buffer with 16-byte blocks.
This prevents from doing unnecessary memcpy that would have an
impact on the driver's performance.
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Extend several flash samples and tests so that they can also be used
with "jedec,mspi-nor" devices.
Add configurations needed for the nrf54h20dk/nrf54h20/cpuapp target.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
native_posix is being removed as it has reached its end of life in 4.2,
after being deprecated since 4.0.
So these overlays will not serve any purpose anymore.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is being removed as it has reached its end of life in 4.2,
after being deprecated since 4.0.
Remove the twister support for native_posix[//64] and therefore all
references to them from the testcases and samples yamls, so twister
does not error out.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This updates the documentation of all the EnjoyDigital boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The harness was set to ztest, but the sample requires the console
harness to match on the "sample complete" line, its not actually
using ztest.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Allow user to add shell commands in testcase/sample yaml file
alongside the harness_config like in the console harness.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
This commit adds support for these multicore samples:
- samples/drivers/mbox
- samples/drivers/mbox_data
- samples/subsys/ipc/ipc_service/static_vrings
- samples/subsys/ipc/openamp
Signed-off-by: Tomas Galbicka <tomas.galbicka@nxp.com>
Add configuration and board overlay in the I2S audio codec sample to
demonstrate usage of the newly introduced audio output feature.
Signed-off-by: Titouan Christophe <moiandme@gmail.com>
The shell harness expects the UART can be routed to stdin/out on POSIX
arch based targets, but this is not the case for the bsim targets (at
least not yet, and not using the native_posix UART configuration option)
This causes these tests to fail timing out in CI => let's filter these
platforms by now.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add i2c_bus_short fixture to the rtio_loopback sample to ensure it
is only run on boards with the bus shorted. The i2c_bus_short
fixture is also used in the i2c_target_api test suite.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Enable spi_flash sample for MAX32655FTHR and MAX32655EVKIT
which have an external Winbond W25Q128jv external flash.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
Signed-off-by: Rob Cornall <Rob.Cornall@analog.com>
Signed-off-by: Yasin Ustuner <Yasin.Ustuner@analog.com>
Enable DAC entry in device tree and pinctrl (PB13/PB14).
Update doc/yaml files to include ADC info.
Update the sample for sam4s_xplained.
Signed-off-by: Ibe Van de Veire <ibe.vandeveire@basalte.be>
nucleo_C071rb overlay file contains all ADC node configurations
to be able to run the sample.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Move overlays and conf from boards to socs in following samples :
- samples/drivers/adc/adc_dt
- samples/drivers/counter/alarm
- samples/drivers/dac
- samples/subsys/settings
Signed-off-by: Marek Matej <marek.matej@espressif.com>
add more samples
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Add support for xg24_rb4187c to the ADC sample app. Configure two
channels, one measuring the AVDD supply against the 1.21V bandgap
reference, and one measuring pin PB1 (wired to button 0) against
the AVDD (VDDX) reference.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
The sample app draws rectangles in the corner of the display.
On devices with the SCREEN_INFO_X_ALIGNMENT_WIDTH capability,
each draw needs to transmit a complete line. Make the sample
work on such displays (e.g. the `ls0xx` driver) by making the
rectangles take up the full width of the display.
Co-authored-by: Benjamin Cabé <kartben@gmail.com>
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Remove ADC2 support (identified as adc1 entry)
for additional ESP32-C3 based board targets.
Other boards have those instances already deleted.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The user of the ft8xx driver can register a callback function called
on a touch detection interrupt event. This function is extended to
include a user-defined pointer. The user-defined pointer helps to share
a callback with multiple driver instances.
Signed-off-by: Hubert Miś <hubert.mis@gmail.com>
Improve the FT8xx display driver to support multiple driver instances.
The ft8xx_reference_api.h still follows the FT8xx programming guides,
limiting the usage of the driver to one instance.
Signed-off-by: Hubert Miś <hubert.mis@gmail.com>
Add overlays for nrf54h20dk_nrf54h20_cpuppr. Moved common configuration
for nrf54h20dk to nrf54h20dk_nrf54h20_common.dtsi. Add configuration
for vpr_launcher on nrf54h20dk_nrf54h20_cpuapp.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Rename video_fourcc() to VIDEO_FOURCC(), differing from the Linux
implementation, but more compliant with the coding style.
Also introduce a VIDEO_FOURCC_FROM_STR() to generate a FOURCC format
code out of a 4-characters string.
Signed-off-by: Josuah Demangeon <me@josuah.net>
This commit adds support for these multicore samples:
- samples/drivers/mbox
- samples/drivers/mbox_data
- samples/subsys/ipc/ipc_service/static_vrings
- samples/subsys/ipc/openamp
Signed-off-by: Tomas Galbicka <tomas.galbicka@nxp.com>
This examples shows how to use the AD4114 ADC on a
stm32f3_disco board.
As the AD4114 is a 24bits ADC resolution we need to be able
to pass 32bits buffer to get the samples.
CONFIG_SEQUENCE_RESOLUTION is set to 12 instead of 24, and the
gain zephyr,vref-mv is adapted to avoid overflows using the
exisiting adc_raw_to_millivolts function.
Signed-off-by: Pierrick Curt <pierrickcurt@gmail.com>
Adjust the Kconfig symbols of the capture to lvgl sample. LV_MEM_CUSTOM has
been removed in v9.0 and LV_USE_IMG has been changed to LV_USE_IMAGE.
Fix the changed fields for the image descriptor struct.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
The RP2350's PWM peripheral is largely unchanged from the RP2040's, but
the higher clock frequency means the long blink delay must be lower.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
The Raspberry Pi Pico 2's device is compatible with the existing Pico 1.
The build system requires a `<board>.overlay` file, but these use the
pre-processing to #include the sibling rpi_pico.overlay files rather
than duplicating the contents as an attempt to keep things DRY.
Tested locally.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
The LoRa driver does not allow to pass void* user_data to callback in
lora_recv_async function. This leads to complex way of using the API. This
commit fixes the issue and adds the field to the function and to the
callback.
Signed-off-by: Aleksander Dejewski <aleksander.dejewski@gmail.com>
Convert qspi and hyperflash to variants instead of revisions by popular
demand.
And convert evkb into a revision instead of a different board.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add an integration platform to the LoRa samples so that changes to these
applications are checked in the PR CI.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Add sample which clearly and thorougly shows how to use RTIO with
I2C controllers, both synchronously and async, comparing it with
the "standard" I2C API, in an controlled environment. Both the I2C
controller and I2C target are managed by the sample, using loopback
to monitor and control the I2C transfers.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Add a new option to control usage of DT nodelabel board_power. This
option also allows to select GPIO when needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add options to control the behavior of sw0/sw1. These options also allow
to select GPIO when needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add Devicetree overlay for sample drivers/led/pwm and fix the one in
basic/blinky_pwm for nucleo_l4r5zi board to set appropriate to enable
pwdleds and set appropriate timer prescaler.
Signed-off-by: Yishai Jaffe <yishai1999@gmail.com>
The Adafruit QT Py ESP32-S3 needs to have GPIO hogs enabled in order to
use the onboard RBG LED with the led_strip sample code.
Signed-off-by: Ian Wakely <raveious.irw@gmail.com>
Do hflipping at camera level to avoid using PxP which impacts camera
framerates on RT10xx. Moreover, on RT11xx, PxP is already reserved
for 90 CCW image rotation.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Add an option to mirror the video image horizontally. This helps
to avoid doing so at the post-processing step by using additional
HW such as PxP on i.MX RT platforms.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Make APP_CPU board name auto generated and remove the related config.
Remove the boards overlay and replace with a socs overlays.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
This PR fixes a blocking call to video_buffer_alloc in case of memory
shortage by addign a timeout parameter to the API.
Signed-off-by: Armin Kessler <ake@espros.com>
Commit 55d9d1c6ba
("samples: led: consolidate LED samples under same directory")
moved the led_strip sample from samples/drivers to samples/drivers/led.
But commit f54a53b4b3
("drivers: ws2812_gpio: Make timing configurable and less hardware
dependend") was merged at the same time and added the bbc_microbit.conf
file to the old location.
This patch moves bbc_microbit.conf to its correct location.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
It is no longer needed to enable a specific flash driver in the sample
configuration. An appropriate driver (together with its dependecies,
like the SPI bus) for a given target will be enabled automatically
based on what is enabled in DTS.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
It is no longer needed to enable a specific flash driver in the sample
configuration. An appropriate driver (together with its dependencies,
like the SPI bus) for a given target will be enabled automatically
based on what is enabled in DTS.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Correct "zephyr,sram" property under /chosen node to make board and samples
compatible with new SoC memory description.
Signed-off-by: Marcio Ribeiro <marcio.ribeiro@espressif.com>
Signal-to-noise ratio is a unitless quantity, so its unit is dB, not
dBm (dBm is the power relative to 1 milliwatt). At the same time output
the received payload using `LOG_HEXDUMP_INF`, instead of limiting the
sample solely to string payloads.
Fixes#82414
Signed-off-by: Jordan Yates <jordan@embeint.com>
Convert them to native YAML lists. Support for space-separated
lists was deprecated in Twister a long time ago.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Change `GPIO39` to `GPIO38` in overlay.
The esp32s3_devkitc rgb led is connected to GPIO38, not 39.
Tested change on board and verified to function as intended.
Signed-off-by: david burke <david@aheng.io>
This uses Linux V4L2 controls as a reference to give names to the
CIDs. Apply the renaming down to the drivers that use them.
Signed-off-by: Josuah Demangeon <me@josuah.net>
add display type for fixtures to avoid conflcts
in NXP platform
1. add required regex for console harness.
2. add message after processing, ensure the flow is OK
3. reduce the test time in TEST mode
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Add a simple demonstration of the led_write_channels api on the lp5569
driver sample.
The demonstration simply turns on all of the channels with a single call to
led_write_channels. Then the same is done for turning off the channels.
Thus, it doesn't add much visually, but it shows the usage of the api.
Signed-off-by: Emil Dahl Juhl <emdj@bang-olufsen.dk>
This PR adds arduino giga r1 overlay in the dac sample.
Arduino Giga R1 has a 3.5mm audio jack connected to the
dac.
Signed-off-by: Mario Paja <mariopaja@hotmail.com>
The nRF54L05 and nRF54L10 are identical to the nRF54L15 except for their
memory sizes. Add support for emulating those ICs on the nRF54L15DK.
This commit only adds support for the main application core. Support for
the FLPR core may be added later.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
A valid device tree configuration is provided for the ADCs of the 8 input
channels and the sample adc_dt works out of the box. Obviously this is
not the only possible configuration but it provides a good template for
further customization without the need to lookup the ADC GPIOs and
connections in the schematics.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
Add `hifive_unmatched//s7` (earlier selected by default, using
`hifive_unmatched`) and `hifive_unmatched//u74` targets.
Define work-area for other 4 cores in openocd.cfg
Update twister platform white/black lists, to support new targets
Signed-off-by: Jakub Wasilewski <jwasilewski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add `hifive_unleashed//e51` (earlier selected by default, using
`hifive_unleashed`) and `hifive_unleashed//u54` targets.
Define work-area for other 4 cores in openocd.cfg
Update twister platform white/black lists, to support new targets
Signed-off-by: Jakub Wasilewski <jwasilewski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
ARGB8888 values all had alpha '0x00' (=transparent).
Changed them to '0xFF' and added a transparency test patch in the middle
of the screen.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
The newly introduced `frame_incomplete` flag of
`display_buffer_descriptor` needed to be added at several places to
avoid uninitialized memory.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
Updates and fixes to support IPM sample on ESP32:
- fix IPM sample code for APPCPU and PROCPU
- align with memory layout, add flash awarenes
- shell commands to stop/start APPCPU
- reorganize overlays
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Twister's extra arguments feature only works correctly if the fully
qualified platform name is given, which was not the case. Make all
platform names for the shield testcase fully qualified to resolve this.
Fixes#80876
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
LPC54114 does not define arduino_header nodelabel, so it cannot be
supported by the shield test within the display sample. Replace with
mimxrt1010_evk, which is supported.
Fixes#80876
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
