Introduce BT_CTLR_PERIPHERAL_RESERVE_MAX Kconfig option so
that disabling this option will use minimum time reservation
and exercise the peripheral connection event continuation
using is_abort_cb mechanism.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
* Setting the adv data, scan rsp and adv aux ad data can happen on
overlapping buffers
* There can be other memcpy's that need to be changed to memmove but
these are the only ones I could reproduce the issue and since memmove
has a performance penalty, I left the others as is.
Signed-off-by: Yago Fontoura do Rosario <yafo@demant.com>
Some enums have been renamed:
- NRF_CCM_EVENT_ENDCRYPT -> NRF_CCM_EVENT_END
- NRF_CCM_TASK_CRYPT -> NRF_CCM_TASK_START
Also adjust some TX power level settings (26/28dBm not always available
depending on the SoC revision).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Fix assertion when enabling simultaneous multiple Extended
Advertising chain reception that is enabled by increasing
supported auxiliary scan contexts.
ULL sets the association of aux context to scan and sync
context, and LLL resets the association; this is safer
compared to earlier implementation where ULL did both the
association and reset which caused aux context memory
leak.
Supported auxiliary scan contexts can be increased using
CONFIG_BT_CTLR_SCAN_AUX_SET value.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
If a connection update (from central) overlaps a peripheral initiated
conneection param request, then central rejects peripheral request
and continues central procedure. This lead to an assert in peripheral
On instant there would not be an rx_node for notification, as this
would have been discarded by the reception of the REJECT.
This fix ensures that once an rx_node has been 'accepted' for retention
it will not be discarded/overwritten by future rx_nodes
The test will trigger the assert without the fix in.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Because timing of the pause/resume for peripheral/sync is based on
central/broadcaster active clock, the sleep-clock jitter shall not be
added.
Signed-off-by: Morten Priess <mtpr@oticon.com>
- Add next pointer to node_rx_iso_meta for pre-transmission linked
list (does not increase memory usage as union is larger).
- Fix broadcaster not setting PTC with test configuration
- Refactor stopping of sync ISO tickers to separate function
Signed-off-by: Morten Priess <mtpr@oticon.com>
Share pause/resume functionality by moving resume ticker handling to
ull_iso. Rename interface function to ull_conn_iso_resume_ticker_start,
and provide handles instead of instance pointer.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Remove unused nRF21 FEM SPI CSN control as the Zephyr
Controller does not implementation SPI control for Tx/Rx
nor for Tx gain settings.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit makes the device tree configuration decide
which link layer is compiled in. We do this to avoid
hard-to-understand linker errors referencing device tree nodes.
The following configuration creates a difficult to parse
linker error:
* BT_LL_CHOICE contains multiple entries, BT_LL_SW_SPLIT
is selected.
* Each BT_LL_CHOICE has its own unique device tree node with its
own "compatible".
* Only one of the link layer device tree nodes has status "okay",
but not the one corresponding to BT_LL_SW_SPLIT.
The linker error indicates that code using the HCI driver fails
to link with the controller. This because the HCI driver device
tree node references the link layer selected in devicetree which
is not compiled in.
By adding a dependendency to the device tree node, this can no longer
happen. Instead, if BT_LL_SW_SPLIT is now selected in a configuration
file, a Kconfig warning will be issued:
```
warning: The choice symbol BT_LL_SW_SPLIT
(defined at subsys/bluetooth/controller/Kconfig:129) was
selected (set =y), but BT_LL_SOFTDEVICE (defined at
/home/ruge/ncs/nrf/subsys/bluetooth/controller/Kconfig:11)
ended up as the choice selection.
```
This should be easier to understand than:
```
...(hci_core.c.obj):(.data.bt_dev+0x16c):
undefined reference to `__device_dts_ord_132'
```
After this commit we should consider getting rid of link layer
selection from Kconfig completely as the link layer is in practice
selected through device tree.
Unit tests have been updated to satisfy the dts dependency.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Moves around the shell files so that they are placed nearer
to the features they expose access to.
A few changes as possible has been made.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
For code clarity, this commit adjusts the use of `return` statements
in functions with a void return type as follows:
- Transform `return foo();` into separate statements:
`foo();`
`return;`
- Remove unnecessary `return` statements when
they don't affect control flow.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Define a macro to validate aux offset value as it is checked
both in LLL and ULL execution contexts.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Controller hang due to infinite looping caused by
duplicate node_rx enqueued in auxiliary context.
When LLL scheduling is not applied due to invalid aux offset
then ULL scheduling too would skip setting up the reception
after similarly checking the validity of aux offset required
to schedule the reception of auxiliary PDU. This check in
ULL was after the received node_rx being enqueued into the
auxiliary context causing a loop in the list of node_rx.
Dequeue of a list with a loop of node_rx caused an infinite
loop execution in the Controller.
Regression introduced in commit 3590bd648f ("Bluetooth:
Controller: Fix missing invalid aux offset check").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add assertion check to catch infinite loop due to incorrect
node_rx release.
If same node_rx is released twice then it can lead to
infinite looping when releaseing link or node_rx buffers.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rework comment text for FAKE_ENTROPY_NATIVE_POSIX used as
entropy driver for the Controller on BOARD_NRF54L15BSIM.
Relates to commit 34b6b3d9eb ("Bluetooth: Controller:
Support FAKE_ENTROPY_NATIVE_POSIX").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for use of FAKE_ENTROPY_NATIVE_POSIX as entropy
driver for the Controller on BOARD_NRF54L15BSIM.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Behaviour is unchanged for max_skip == 0
For max_skip > 0, use a slightly different calculation to ensure
we can pass LL/DDI/ADV/BV-28-C
Signed-off-by: Troels Nilsson <trnn@demant.com>
CONFIG_SOC_COMPATIBLE_* is not configurable but CONFIG_BT_LLL_VENDOR_* is.
This allows an alternate LLL to be built on nordic and OpenISA chips.
Signed-off-by: Félix Piédallu <felix@piedallu.me>
Use SW_SWITCH_SINGLE_TIMER for nRF54Lx so that fast ramp
can be used, and hence support assymmetric PHYs in ACL
connections.
nRF54Lx radio domain does not have second timer instance
to efficiently implement software switch unless a second
time is used from a different power domain needed use of
PPIB for the double buffered switch timer compares.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use NRF_GRTC, Global real-time counter, instead of NRF_RTC.
NRF_GRTC is present in a different power domain in the SoC.
Also, NRF_GRTC provide microsecond resolution timing units,
in the future use of NRF_TIMER for packet timer can also be
replaced.
Use of NRF_RTC would keep Radio power domain ON in addition
to already ON NRF_GRTC's power domain, hence switch to using
NRF_GRTC on nRF54Lx SoC to have lower power consumptions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
nRF54Lx have updated Data Whitening register settings, add
implementation to correctly set them up.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor sw_switch hal interface use and document why some
PPI/DPPI channel group related subscriptions are not
disabled explicitly.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix software tIFS switching using single timer from
triggering spurious TXEN/RXEN if the first remainder is
shorter than the tIFS delay calculated in the sw_switch()
function.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The BIG info new Framing Mode field was not initialiazed, so
random garbage was being sent to the air in this field.
For the controller this field is still RFU.
The spec specifies RFU fields must be initialiazed to
0. So let's do so to avoid sending invalid data,
and avoid having random data in the air which can cause
random differences in testcases.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix missing implementation to handle Broadcast ISO MIC
failure during Broadcast ISO establishment, and during an
already established Broadcast ISO sync.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
- got rid of "Others" menu
- JK I made a new one: "Common"
- moved all host-related opts to "Host" instead of "Others"
- moved all audio-related opts behind `if BT_AUDIO`
- moved only controller kconfig to controller/Kconfig.ll_sw_split
- it had a dependency there already
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Path loss monitoring does not work without LE Power Control
also enabled in the controller, so update the dependencies
in the kconfigs so path loss monitoring selects power
control.
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
Fix missing invalid aux offset check that was being caught
in a development assertion check. If aux offset where less
than the PDU time of the primary channel PDU, radio was
redundantly being setup delayed for reception that was
being caught in an assertion check.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Introduce Controller dependent EVENT_MAFS_MIN_US value to
use as the value when populating the aux offset between
Extended Advertising primary and auxiliary channel PDUs.
This can be used as workaround for peers having difficulty
receiving Extended Advertising PDUs with near 300 us MAFS
values used in aux offset calculations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Relax the radio packet pointer assignment deadline assertion
until access address being transmitted. The PDU buffer is
probably only needed just after access address is being
transmitted or received by the radio. This will give some
more breathing room for slow CPUs like in nRF51x SoCs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression using speed optimization introduced in
commit 1b7fe792e0 ("Bluetooth: Controller: Support Link
Time Optimizations (LTO)").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression in encrypted connection introduced in
commit f3deccda91 ("Bluetooth: Controller: CCM read data
to early when DF enabled on PHY 1M").
Due to this nRF51x SoC hang waiting to encrypt and/or
check MIC.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In case of ISR latencies, if packet pointer has not been
set on time then we do not want to check uninitialized
length in rx buffer that did not get used by Radio DMA.
This would help us in detecting radio ready event being
set? We can not detect radio ready if it happens twice
before Radio ISR executes after latency.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Only 3 bytes (PDU_EM_LL_SIZE_MAX) is required for empty PDU
transmission, but in case of Radio ISR latency if rx packet
pointer is not setup then Radio DMA will use previously
assigned buffer which can be this empty PDU buffer. Radio
DMA will overrun this buffer and cause memory corruption.
Any detection of ISR latency will not happen if the ISR
function pointer in RAM is corrupted by this overrun.
Increasing ISR latencies in OS and CPU usage in the
ULL_HIGH priority if it is same as LLL priority in
Controller implementation then it is making it tight to
execute Controller code in the tIFS between Tx-Rx PDU's
Radio ISRs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ISR profiling when using single timer for tIFS radio
switching wherein in the timer is cleared on every radio
end. Hence, the captured timer value is the latency and
does not required the radio end timestamp to be subtracted.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use uint16_t to store ISR profiling value to avoid overflow
in case of higher latencies.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix in-system ISR profiling for advertiser and connection
role for the missing implementation when there is CRC error.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When periodic scanning reaches timeout and BIGinfo has not yet been
received, notify with BT_HCI_ERR_CONN_FAIL_TO_ESTAB for sync receiver.
Signed-off-by: Morten Priess <mtpr@oticon.com>
When an ISO stream fails to sync to a broadcaster within the first 6
events, the establishment fails (as expected). However, it did not stop
the ticker, and subsequently it was impossible to establish a new sync
after this.
Make asynchronous call to ticker_stop when establishment fails, and exit
done handling. Cleanup is handled via ll_rx_dequeue().
Signed-off-by: Morten Priess <mtpr@oticon.com>
When the ISO sync receiver has been disabled (terminted), ULL now calls
lll_sync_iso_flush in lower link layer, to allow cleanup and releasing
of resources.
Make sure ISO sync LLL flush is also called when terminating a stream
from local side (app). Add blocking mayfly call to lll_sync_iso_flush in
ll_big_sync_terminate.
Signed-off-by: Morten Priess <mtpr@oticon.com>
If a race condition occurs between stopping CIS stream and tearing down
data path, releasing TX PDUs was not possible for vendor data path, as
the DP configuration is gone.
In that case, call a new vendor specific function for cleaning up and
returning PDUs to correct pool.
Signed-off-by: Morten Priess <mtpr@oticon.com>
The MFIFO holding TX nodes on the ack path back to the host was only
sized to hold the possible number of ACL TX nodes. However, additional
TX nodes are allocated for LLCP and use the same FIFO.
By adding LLCP_TX_CTRL_BUF_COUNT to the size, the FIFO will be able to
hold the worst-case number of TX nodes.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Rename to BT_TICKER_START_REMAINDER better reflect what it
means in terms of providing remainder parameter to ticker
start interface.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Score was never increased for scan_aux events since they are
one-shot events; Fixed by keeping the scan_aux score as part
of the scan structure
Signed-off-by: Troels Nilsson <trnn@demant.com>
Support for separate SDU interval for C_to_P and P_to_C
directions when setting CIG parameters.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Since HWMv1, we also have CONFIG_$BOARD Kconfig symbols defined, ie, no
SoC/core/variant needed.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Fix implementation to consider event latencies due to
BIG events being skipped due to overlap with other state or
role, and generate any received/buffered pre-transmissions
towards the Host.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing PTO subevent reception for second or more BISes
when current payload count associated PDUs where already
received in previous ISO events as pre-transmissions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This fixes a bug where the stack may get stuck in the
POWER_CLOCK ISR after enabling and disabling the Bluetooth
stack a couple of times. It happens after calling
`onoff_request()` after a failing call to `onoff_release()`.
Then the `lf_cli`s next points to itself, generating a
circular list of clients.
Calling `onoff_release()` may fail if there is an outstanding
request. By calling `onoff_cancel()` we enter a state where
we can safely remove the client.
This was not seen earlier because the return value
from `ll_deinit()` in `hci_driver_close()` was ignored.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Fix Advertising PDU memory allocation for redundant Periodic
Advertising related PDU allocations. The buffer count
related to Periodic Advertising was included twice.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Utilize a code spell-checking tool to scan for and correct spelling errors
in all files within the subsys/bluetooth/controller directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Use PDU_BIS_LLID_FRAMED in empty PDUs for framed BIS
Allocate room for header when calculating max_pdu for framed BIS
Set group_sync_delay, stream_sync_delay and framed properly for BIS
broadcaster
Add missing call to isoal_tx_event_prepare() for BIS
Signed-off-by: Troels Nilsson <trnn@demant.com>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
- Assign sync_delay parameters for ISO-AL sink creation
- Store framing information from BIGinfo for use in sink creation
- Set max_octets for sink creation
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix BT_CTLR_ISOAL_PSN_IGNORE implementation when adjusting
Sequence Number during overlap with current CIG event.
Reuse the implementation from non-PSN ignore implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Troels Nilsson <trnn@demant.com>
Nordic devices are commonly used with the nRF Connect SDK.
There the SoftDevice Controller is set as the default
Bluetooth Controller. To avoid confusion when reading DTS
and Kconfig files, clarify this by adding a note.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Fix regression due to use of HAL_RADIO_TMR_START_DELAY_US
introduced in commit 11bae5cfa9 ("Bluetooth: Controller:
Fix missing radio timer comp and range delay").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update the native controller to the new HCI driver API. The devicetree
node is placed under existing `radio` nodes, which seemed like the most
intuitive option.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
ull_adv_sync_pdu_set_clear does pretty much everything, causing
it to be very complex and awkward to use. In addition, it only handles
a single PDU, meaning callers have to handle the chain.
It has been replaced with simpler, more complete functions for handling
the relevant operations
Fixed issues include:
- Fragmentation of adv data over HCI is now decoupled from PDU
fragmentation, fixing HCI/DDI/BI-13-C, LL/DDI/ADV/BV-26-C and
LL/DDI/ADV/BV-55-C
- Adding BigInfo now preserves the PDU chain
- Enabling periodic advertising with ADI on would sometimes fail
due to insufficient space in a single PDU to add ADI
Signed-off-by: Troels Nilsson <trnn@demant.com>
Use the compatible kconfig option so that for the simulated
nRF54L15 we build the same code as for the real platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For the Nordic HW, the BT_CTLR_DATA_LEN_UPDATE_SUPPORT
does not require CCM HW enabled, hence support Data Length
Update if Encryption Support is disabled.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In some nRF54 devices, DATAWHITEIV was renamed to
DATAWHITE,
and the CRCCNF SKIADDR field was renamed OFFSET.
The nrf HAL hid this change internally,
so let's use it so we don't need to ifdef these
in the Bluetooth Controller HAL code.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add preliminary support for nRF54L15 SoC. This commit does
not support Controller Random Number Generation and
Controller Cryptography (AES-128 encryption) commands, nor
does it support encrypted connections.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use NRF_RTC and NRF_RADIO_SHORTS_TRX_END_DISABLE_Msk instead
to prepare towards using configurable use of RTC and Radio
hardware defines.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add unit tests to cover explicit LLCP error code check and
cover the same in the Controller implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
A Host shall consider any error code that it does not
explicitly understand equivalent to the error code
Unspecified Error (0x1F).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Introduce BT_CTLR_CRYPTO_SUPPORT so that preliminary port to
support nRF54L15 SoC can be upstreamed without encryption
support.
ENTROPY_GENERATOR now selected when BT_CTLR_CRYPTO enabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit adds host support for the Path Loss Monitoring
feature see Bluetooth Core specification, Version 5.4,
Vol 6, Part B, Section 4.6.32.
Limited logic is required, just adding a wrapper around the
HCI command and callback for HCI event.
Add new zone - BT_CONN_LE_PATH_LOSS_ZONE_UNAVAILABLE, to
convert 0xFF path loss to a useful zone.
Add new Kconfigs and functionality to the bt shell.
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
The simulated targets support the same power levels as the
real targets. Let's correct the kconfig dependencies
accordingly.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Make `struct arch_esf` compulsory for all architectures by
declaring it in the `arch_interface.h` header.
After this commit, the named struct `z_arch_esf_t` is only used
internally to generate offsets, and is slated to be removed
from the `arch_interface.h` header in the future.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Fix missing validation of Connection Update Ind PDU. Ignore
invalid connection update parameters and force a silent
local connection termination.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Namespaced the generated headers with `zephyr` to prevent
potential conflict with other headers.
Introduce a temporary Kconfig `LEGACY_GENERATED_INCLUDE_PATH`
that is enabled by default. This allows the developers to
continue the use of the old include paths for the time being
until it is deprecated and eventually removed. The Kconfig will
generate a build-time warning message, similar to the
`CONFIG_TIMER_RANDOM_GENERATOR`.
Updated the includes path of in-tree sources accordingly.
Most of the changes here are scripted, check the PR for more
info.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Allocate the GPIOTE channels that the Bluetooth Controller needs to use
with the dedicated function provided by the nrfx_gpiote driver instead
of using hard-coded indexes of these channels, as now, when the driver
supports multiple GPIOTE instances, it would be much more difficult to
properly inform the driver which channels should be reserved.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The BIG handle for an ISO sync receiver is provided by the host. The
valid range is [0x00..0xEF], and this requires the controller to allow
non-consecutive handle numbering. This means that even if only one sync
set is supported, a BIG handle of ex. value 2 must be supported.
As the code uses indexing and range checking directly by handle, this
needs to be changed. Introducing the handle index, which sequnces the
handles such that index = 0 is always the "first handle", regardless
of value.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Support for using Link Time Optimization (LTO) when
building application with open source Bluetooth Low
Energy Controller. This reduces code space usage.
Current Memory Usage at the time of this PR (hci_ipc):
BT_CTLR_OPTIMIZE_FOR_SPEED:
Memory region Used Size Region Size %age Used
FLASH: 260112 B 256 KB 99.22%
RAM: 60136 B 64 KB 91.76%
SRAM1: 0 B 64 KB 0.00%
IDT_LIST: 0 B 32 KB 0.00%
BT_CTLR_OPTIMIZE_FOR_SIZE:
Memory region Used Size Region Size %age Used
FLASH: 232292 B 256 KB 88.61%
RAM: 60128 B 64 KB 91.75%
SRAM1: 0 B 64 KB 0.00%
IDT_LIST: 0 B 32 KB 0.00%
BT_CTLR_OPTIMIZE_FOR_APP_DEFAULT:
Memory region Used Size Region Size %age Used
FLASH: 232292 B 256 KB 88.61%
RAM: 60128 B 64 KB 91.75%
SRAM1: 0 B 64 KB 0.00%
IDT_LIST: 0 B 32 KB 0.00%
BT_CTLR_LTO:
Memory region Used Size Region Size %age Used
FLASH: 221484 B 256 KB 84.49%
RAM: 60120 B 64 KB 91.74%
SRAM1: 0 B 64 KB 0.00%
IDT_LIST: 0 B 32 KB 0.00%
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove legacy LL optimize for speed dependency required to
support encryption feature in Controller where crypto was
performed in highest priority ISRs to setup encryption in 3
radio events (this now requires 5 radio events in split LL).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a new option to split off the building of the HCI layer of the
controller. This layer is not needed by the controller unit tests, and
becomes problematic with the planned change to use devicetree for HCI
drivers.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Ensure that in LLCP reference to node_rx is cleared when
retention is NOT used, to avoid corruption of node_rx later
re-allocated
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
In case a CPR is intiated but rejected due to CPR active on
other connection, rx nodes are leaked due to retained node not
being properly released.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
The mic_state is a guarded field in event_done_extra where it was
accessed outside of its guard.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
For vendor datapaths that do not use a netbuffer to write SDUs
into, the callee of sdu_write currently has to keep track itself
of how much data has been written to the current SDU; This is wasteful
since ISOAL already keeps track of that. Add an sdu_written parameter
to the callback to inform the callee how much has been written to the
current SDU already so the callee can write using the correct offset
Signed-off-by: Troels Nilsson <trnn@demant.com>
This function was used to shortcut HCI for combined host + controller
builds. It doesn't provide much value and adds complexity to the HCI
driver interface, so just remove it. This means vendor-specific HCI
commands is now the only way for the host to access the same
information.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Enabling vendor-specific extensions also implies support for vendor
events, so a separate Kconfig option for that is unnecessary.
One small additional thing this requires is the use of the
__maybe_unused annotation, since there's no-longer a single Kconfig
option that the controller hci.c can use to know that the vendor event
helper symbols are needed.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
The naming of these two options was problematic, since it's both of them
are about vendor extensions, even though one has _EXT in the name and
the other doesn't. Just merge one option into the other. This has a
slight overhead on the controller side of enabling some more vendor
features if BT_HCI_VS is enabled, but that should hopefully be
acceptable.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Derive BT_CTLR_ISO_TX_BUFFER_SIZE from BT_ISO_TX_MTU to have
optimal Controller memory allocations.
BT_CTLR_ISO_TX_BUFFER_SIZE can be set lower than
BT_ISO_TX_MTU in which case upper layer can send fragmented
SDU to the Controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rename struct bt_hci_iso_data_hdr to bt_hci_iso_sdu_hdr, and
struct bt_hci_iso_ts_data_hdr to bt_hci_iso_sdu_ts_hdr.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In ull_disable, it is imperative that the callback is set up before a
second reference counter check, otherwise it may happen that an LLL done
event has already passed when the disable callback and semaphore is
assigned.
This causes the HCI thread to wait until timeout and assert after
ull_ticker_stop_with_mark.
For certain compilers, due to compiler optimizations, it can be seen
from the assembler code that the callback is assigned after the second
reference counter check.
By adding memory barriers, the code correctly reorders code to the
expected sequence.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Implement LL_ASSERT_INFO1 and LL_ASSERT_INFO2 for triggering assertions
with parameter information provided for vendor core dump.
Adds Kconfig CONFIG_BT_CTLR_ASSERT_VENDOR by which the new LL asserts
map to BT_ASSERT_VND macros, which shall be implemented in the
debug_vendor_hal.h of the platform. If not enabled, LL_ASSERT_INFO will
map to existing BT_ASSERT_MSG with parameters printed.
Add use of LL_ASSERT_INFO2 where ull_ticker_stop_with_mark() result may
assert.
Signed-off-by: Morten Priess <mtpr@oticon.com>
When building ISO applications on a device that has the host
and controller on the same core, the application developer
shouldn't have to set controller specific configurations.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Use reschedule margin as minimum ticks_slot when ticker with
reschedule expires. This will ensure not too many unreserved
tickers expire in close proximity that can lead of pile up
of CPU processing time and eventually causing timeout
callbacks to be delayed. This mitigate possible LL asserts
due to overhead in start of radio events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable use of ticker slow window yield feature under mesh
usecase. This is make sure scan window either slides within
is window or skips to next interval so that it does not
lead to advertising event being skipped.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix short prepare preempt timeout start, such that if there
are any normal prepare before a short prepare in the
pipeline, then find the short prepare and start its preempt
timeout.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add prepare pipeline assertion checks to detect faults
like stopping preempt timeout without prior start. Also,
check if the preemptor param is correct when preemption
is performed. Check that the prepare pipeline is not
infinitely looping.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add assertion check for use of scan aux context so that
scan aux context is not assigned again while there is
already an existing LLL scheduling in use by the scan
context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix BT_CTLR_EARLY_ABORT_PREVIOUS_PREPARE to setup new
shorter preempt timeout irrespective of whether there
is a previous prepare enqueued in the prepare pipeline.
Relates to commit d573951f0d ("Bluetooth: Controller:
Revert back early abort of previous prepare").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When building ISO applications on a device that has the host
and controller on the same core, the application developer
shouldn't have to set controller specific configurations.
Without this change the samples iso_receive and iso_broadcast
will fail to run on NRF52 series devices as the samples
try to set up two streams but the controller is configured
to support only one.
Controller unit tests that were previously only enabling the
controller specific ISO configurations now also enable the
top-level ISO configurations to ensure that the default
stream count is properly configured.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Update the documentation of `BT_CTLR_ADV_DATA_CHAIN` Kconfig symbol to
say that it's only supported in *non-connectable* extended advertising.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Ignore failure to Broadcast ISO remove data path when
terminating a BIG without a data path being setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When multiple advertisers overlap over time, the random
delay being applied need many ticker operation context.
This causes the ticker_update interface to return error
causing assertion in the Controller.
This is fixed by not applying random_delay value to the
overlapping advertiser that does not get to use the radio.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add aux offset population assertion check, to ensure the
aux offset calculation is completed before the primary
PDU is setup for transmission.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Change default to using advertising coding in ACL connection
when establishing connections on Coded PHY.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add missing check for Coded PHY support when creating
extended advertising set.
Added a fallback in Controller for upper layers requesting
Coded PHY while Controller is implemented without Coded PHY.
In this case, 1M PHY will be used in extended advertising
for testing purposes.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Ignore LE 2M PHY being set in Initiating_PHYs of the
LE Extended Create Connection command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
UBSan was showing the following error:
```
runtime error: left shift of 137 by 24 places cannot be represented in
type 'int'
```
Cast the value to `uint32_t` to make UBSan happy.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Implement test version of the LE Create BIG command ll_big_test_create
(BT_HCI_OP_LE_CREATE_BIG_TEST) in the controller.
This enables use of CONFIG_BT_ISO_ADVANCED, which supports use of
the following BIG/QoS configuration parameters (otherwise derived):
- ISO_Interval
- NSE
- Max_PDU
- BN
- IRC
- PTO
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix regression in BT_RX_STACK_SIZE use due to
commit b91728619c ("Bluetooth: host: remove
`CONFIG_BT_RECV_BLOCKING`").
Profiling of Controller Rx thread has been mentioned in
commit 586ba9fd13 ("Bluetooth: Controller: Increase
BT_RX_STACK_SIZE for BT_HCI_RAW enabled").
Also, move the TX_STACK_SIZE value as default in Kconfig
from the explicit value being set in hci_ipc sample.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Generic node_rx_hdr struct contains data not used for done event, so this
pdu specific data is moved to node_rx_pdu to minimize memory usage for
MFIFO_done alloc.
This however calls for a considerable write-through replacing the generic
node_rx_hdr with node_rx_pdu when relevant and needed.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
