Introduce BT_CTLR_CRYPTO_SUPPORT so that preliminary port to
support nRF54L15 SoC can be upstreamed without encryption
support.
ENTROPY_GENERATOR now selected when BT_CTLR_CRYPTO enabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit adds host support for the Path Loss Monitoring
feature see Bluetooth Core specification, Version 5.4,
Vol 6, Part B, Section 4.6.32.
Limited logic is required, just adding a wrapper around the
HCI command and callback for HCI event.
Add new zone - BT_CONN_LE_PATH_LOSS_ZONE_UNAVAILABLE, to
convert 0xFF path loss to a useful zone.
Add new Kconfigs and functionality to the bt shell.
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
The simulated targets support the same power levels as the
real targets. Let's correct the kconfig dependencies
accordingly.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Make `struct arch_esf` compulsory for all architectures by
declaring it in the `arch_interface.h` header.
After this commit, the named struct `z_arch_esf_t` is only used
internally to generate offsets, and is slated to be removed
from the `arch_interface.h` header in the future.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Fix missing validation of Connection Update Ind PDU. Ignore
invalid connection update parameters and force a silent
local connection termination.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Namespaced the generated headers with `zephyr` to prevent
potential conflict with other headers.
Introduce a temporary Kconfig `LEGACY_GENERATED_INCLUDE_PATH`
that is enabled by default. This allows the developers to
continue the use of the old include paths for the time being
until it is deprecated and eventually removed. The Kconfig will
generate a build-time warning message, similar to the
`CONFIG_TIMER_RANDOM_GENERATOR`.
Updated the includes path of in-tree sources accordingly.
Most of the changes here are scripted, check the PR for more
info.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Allocate the GPIOTE channels that the Bluetooth Controller needs to use
with the dedicated function provided by the nrfx_gpiote driver instead
of using hard-coded indexes of these channels, as now, when the driver
supports multiple GPIOTE instances, it would be much more difficult to
properly inform the driver which channels should be reserved.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The BIG handle for an ISO sync receiver is provided by the host. The
valid range is [0x00..0xEF], and this requires the controller to allow
non-consecutive handle numbering. This means that even if only one sync
set is supported, a BIG handle of ex. value 2 must be supported.
As the code uses indexing and range checking directly by handle, this
needs to be changed. Introducing the handle index, which sequnces the
handles such that index = 0 is always the "first handle", regardless
of value.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Support for using Link Time Optimization (LTO) when
building application with open source Bluetooth Low
Energy Controller. This reduces code space usage.
Current Memory Usage at the time of this PR (hci_ipc):
BT_CTLR_OPTIMIZE_FOR_SPEED:
Memory region Used Size Region Size %age Used
FLASH: 260112 B 256 KB 99.22%
RAM: 60136 B 64 KB 91.76%
SRAM1: 0 B 64 KB 0.00%
IDT_LIST: 0 B 32 KB 0.00%
BT_CTLR_OPTIMIZE_FOR_SIZE:
Memory region Used Size Region Size %age Used
FLASH: 232292 B 256 KB 88.61%
RAM: 60128 B 64 KB 91.75%
SRAM1: 0 B 64 KB 0.00%
IDT_LIST: 0 B 32 KB 0.00%
BT_CTLR_OPTIMIZE_FOR_APP_DEFAULT:
Memory region Used Size Region Size %age Used
FLASH: 232292 B 256 KB 88.61%
RAM: 60128 B 64 KB 91.75%
SRAM1: 0 B 64 KB 0.00%
IDT_LIST: 0 B 32 KB 0.00%
BT_CTLR_LTO:
Memory region Used Size Region Size %age Used
FLASH: 221484 B 256 KB 84.49%
RAM: 60120 B 64 KB 91.74%
SRAM1: 0 B 64 KB 0.00%
IDT_LIST: 0 B 32 KB 0.00%
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove legacy LL optimize for speed dependency required to
support encryption feature in Controller where crypto was
performed in highest priority ISRs to setup encryption in 3
radio events (this now requires 5 radio events in split LL).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a new option to split off the building of the HCI layer of the
controller. This layer is not needed by the controller unit tests, and
becomes problematic with the planned change to use devicetree for HCI
drivers.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Ensure that in LLCP reference to node_rx is cleared when
retention is NOT used, to avoid corruption of node_rx later
re-allocated
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
In case a CPR is intiated but rejected due to CPR active on
other connection, rx nodes are leaked due to retained node not
being properly released.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
The mic_state is a guarded field in event_done_extra where it was
accessed outside of its guard.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
For vendor datapaths that do not use a netbuffer to write SDUs
into, the callee of sdu_write currently has to keep track itself
of how much data has been written to the current SDU; This is wasteful
since ISOAL already keeps track of that. Add an sdu_written parameter
to the callback to inform the callee how much has been written to the
current SDU already so the callee can write using the correct offset
Signed-off-by: Troels Nilsson <trnn@demant.com>
This function was used to shortcut HCI for combined host + controller
builds. It doesn't provide much value and adds complexity to the HCI
driver interface, so just remove it. This means vendor-specific HCI
commands is now the only way for the host to access the same
information.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Enabling vendor-specific extensions also implies support for vendor
events, so a separate Kconfig option for that is unnecessary.
One small additional thing this requires is the use of the
__maybe_unused annotation, since there's no-longer a single Kconfig
option that the controller hci.c can use to know that the vendor event
helper symbols are needed.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
The naming of these two options was problematic, since it's both of them
are about vendor extensions, even though one has _EXT in the name and
the other doesn't. Just merge one option into the other. This has a
slight overhead on the controller side of enabling some more vendor
features if BT_HCI_VS is enabled, but that should hopefully be
acceptable.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Derive BT_CTLR_ISO_TX_BUFFER_SIZE from BT_ISO_TX_MTU to have
optimal Controller memory allocations.
BT_CTLR_ISO_TX_BUFFER_SIZE can be set lower than
BT_ISO_TX_MTU in which case upper layer can send fragmented
SDU to the Controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rename struct bt_hci_iso_data_hdr to bt_hci_iso_sdu_hdr, and
struct bt_hci_iso_ts_data_hdr to bt_hci_iso_sdu_ts_hdr.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In ull_disable, it is imperative that the callback is set up before a
second reference counter check, otherwise it may happen that an LLL done
event has already passed when the disable callback and semaphore is
assigned.
This causes the HCI thread to wait until timeout and assert after
ull_ticker_stop_with_mark.
For certain compilers, due to compiler optimizations, it can be seen
from the assembler code that the callback is assigned after the second
reference counter check.
By adding memory barriers, the code correctly reorders code to the
expected sequence.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Implement LL_ASSERT_INFO1 and LL_ASSERT_INFO2 for triggering assertions
with parameter information provided for vendor core dump.
Adds Kconfig CONFIG_BT_CTLR_ASSERT_VENDOR by which the new LL asserts
map to BT_ASSERT_VND macros, which shall be implemented in the
debug_vendor_hal.h of the platform. If not enabled, LL_ASSERT_INFO will
map to existing BT_ASSERT_MSG with parameters printed.
Add use of LL_ASSERT_INFO2 where ull_ticker_stop_with_mark() result may
assert.
Signed-off-by: Morten Priess <mtpr@oticon.com>
When building ISO applications on a device that has the host
and controller on the same core, the application developer
shouldn't have to set controller specific configurations.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Use reschedule margin as minimum ticks_slot when ticker with
reschedule expires. This will ensure not too many unreserved
tickers expire in close proximity that can lead of pile up
of CPU processing time and eventually causing timeout
callbacks to be delayed. This mitigate possible LL asserts
due to overhead in start of radio events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable use of ticker slow window yield feature under mesh
usecase. This is make sure scan window either slides within
is window or skips to next interval so that it does not
lead to advertising event being skipped.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix short prepare preempt timeout start, such that if there
are any normal prepare before a short prepare in the
pipeline, then find the short prepare and start its preempt
timeout.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add prepare pipeline assertion checks to detect faults
like stopping preempt timeout without prior start. Also,
check if the preemptor param is correct when preemption
is performed. Check that the prepare pipeline is not
infinitely looping.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add assertion check for use of scan aux context so that
scan aux context is not assigned again while there is
already an existing LLL scheduling in use by the scan
context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix BT_CTLR_EARLY_ABORT_PREVIOUS_PREPARE to setup new
shorter preempt timeout irrespective of whether there
is a previous prepare enqueued in the prepare pipeline.
Relates to commit d573951f0d ("Bluetooth: Controller:
Revert back early abort of previous prepare").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When building ISO applications on a device that has the host
and controller on the same core, the application developer
shouldn't have to set controller specific configurations.
Without this change the samples iso_receive and iso_broadcast
will fail to run on NRF52 series devices as the samples
try to set up two streams but the controller is configured
to support only one.
Controller unit tests that were previously only enabling the
controller specific ISO configurations now also enable the
top-level ISO configurations to ensure that the default
stream count is properly configured.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Update the documentation of `BT_CTLR_ADV_DATA_CHAIN` Kconfig symbol to
say that it's only supported in *non-connectable* extended advertising.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Ignore failure to Broadcast ISO remove data path when
terminating a BIG without a data path being setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When multiple advertisers overlap over time, the random
delay being applied need many ticker operation context.
This causes the ticker_update interface to return error
causing assertion in the Controller.
This is fixed by not applying random_delay value to the
overlapping advertiser that does not get to use the radio.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add aux offset population assertion check, to ensure the
aux offset calculation is completed before the primary
PDU is setup for transmission.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Change default to using advertising coding in ACL connection
when establishing connections on Coded PHY.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add missing check for Coded PHY support when creating
extended advertising set.
Added a fallback in Controller for upper layers requesting
Coded PHY while Controller is implemented without Coded PHY.
In this case, 1M PHY will be used in extended advertising
for testing purposes.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Ignore LE 2M PHY being set in Initiating_PHYs of the
LE Extended Create Connection command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
UBSan was showing the following error:
```
runtime error: left shift of 137 by 24 places cannot be represented in
type 'int'
```
Cast the value to `uint32_t` to make UBSan happy.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Implement test version of the LE Create BIG command ll_big_test_create
(BT_HCI_OP_LE_CREATE_BIG_TEST) in the controller.
This enables use of CONFIG_BT_ISO_ADVANCED, which supports use of
the following BIG/QoS configuration parameters (otherwise derived):
- ISO_Interval
- NSE
- Max_PDU
- BN
- IRC
- PTO
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix regression in BT_RX_STACK_SIZE use due to
commit b91728619c ("Bluetooth: host: remove
`CONFIG_BT_RECV_BLOCKING`").
Profiling of Controller Rx thread has been mentioned in
commit 586ba9fd13 ("Bluetooth: Controller: Increase
BT_RX_STACK_SIZE for BT_HCI_RAW enabled").
Also, move the TX_STACK_SIZE value as default in Kconfig
from the explicit value being set in hci_ipc sample.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Generic node_rx_hdr struct contains data not used for done event, so this
pdu specific data is moved to node_rx_pdu to minimize memory usage for
MFIFO_done alloc.
This however calls for a considerable write-through replacing the generic
node_rx_hdr with node_rx_pdu when relevant and needed.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Use CONFIG_BT_CTLR_CENTRAL_ISO instead of CONFIG_BT_CENTRAL in
declaring central CIS CREATE procedure context data. In some configs the
size of this data structure is bound by central CIS CREATE, so doing it
correctly will save memory in the procedure context allocation.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
If central initiates incompatible procedure after having replied (with
_IND), peripheral fails to disconnect as spec'ed.
Fix by correctly setting the INCOMPAT flag to reserved on IND receipt to
enforce the disconnect.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
This commit removes `bt_hci_evt_get_flags`, and the associated flag
symbols. These symbols no longer serve a purpose in the driver interface
after the removal of `bt_recv_prio` from the interface.
The implementation of `bt_hci_evt_get_flags` is distributed to its
still-existing use sites, `hci_core` and the `hci_driver` in the
controller.
The duplication of code is intentional. This is no longer part of any
interface, and the host-developers expect the host copy of the function
to change or dissapear entierly. This will allow the host implementation
to progress without fear of breaking the controller implementation.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
This config selects a variant of the HCI driver interface that spills
out host internals unto the drivers and even the Zephyr controller. It
will now be removed in favor of driver interfaces that hide the
internals of the host.
The new default is `CONFIG_BT_RECV_WORKQ_BT`.
Any references to the removed kconfig are refactored out.
Any out-of-tree driver using the removed interface can be easily adapted
by copying the following implementations into the driver as private
functions:
- `hci_driver.h:BT_HCI_EVT_FLAG_RECV_PRIO`
- `hci_driver.h:BT_HCI_EVT_FLAG_RECV`
- `hci_driver.h:bt_hci_evt_get_flags`
- `hci_raw.c:bt_recv_prio`
In combination these symbols function as a interface adapter. These
symbols will be removed in this PR in subsequent commits.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
In the simulated bsim boards there is no jittery delay
from a (D)PPI event until a TIMER starts.
The timer starts instantaneously so we do not need to
compensate for it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Use the HAL always when setting the TIMERs CC registers,
(also for coded Phy) to ensure things work properly for simulation.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add HCI input parameter validation according to spec for passing
qualification tests.
- Conditional compile of LE Set PA Receive Enable feature
- Store BIGinfo encryption state and number of streams
- Do not report BIGinfo if phy is invalid or unsupported
- Return disallowed ll_read_iso_tx_sync uses sync recever handle
- Validate BIS indices in ll_big_sync_create
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix CIS accepted by Host being failed in the Controller with
reason 0x20 Unsupported LL Parameter Value, by relaxing the
check that the ACL connection is sufficiently placed such
that the time reservation using in the Controller
implementation does not overlap with the CIG event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add checks for vendor specific data path in ULL and HCI driver, to
enable use of vendor data path for BIS reception.
Signed-off-by: Morten Priess <mtpr@oticon.com>
- Calculate broadcaster channel for control subevent
- Calculate sync receiver channel for control subevent
- Fix broadcast CSTF only set in first subevent
- Remove ctrl_chan_use from LLL, as there is no longer a reason for
storing it.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Update the legacy low latency variant of the ticker
implementation to skip to next periodic interval when
ticks to expire is behind the current tick. This makes
the low latency variant of the implementation consistent
with the default ticker implementation.
Also, cleanup conditional compiles in the implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When the AUX_ADV_IND and AUX_SYNC_IND are close to each
other, the duration between them is not sufficient to
schedule a new instance of ticker to establish
synchronization. This processing time introduces latencies
detected by the prepare callback.
When the sync offset is low, schedule the start of the
reception to next periodic interval.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing PPI to timer start compensation and missing
inclusion of range delay in the calculation of packet
header receive timeout value.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Extended Advertising Parameter check to exclude legacy
high duty cycle directed advertising from validating the
intervals as advertising interval parameter values are not
applicable for high duty cycle directed advertising.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The BIGinfo PDU bitsets were not accessed in a portable maner for
endianness independence, and need to be handled as bit-manipulations.
Add utility functions to access PDU bitset variables independent of
endianness. Use macros to abstract the offsets and widths.
Conversion of BIG_Handle to LE in HCI layer incorrectly use
sys_cpu_to_le16, which fail because target type is 8-bit.
Signed-off-by: Morten Priess <mtpr@oticon.com>
A few paths used only when there is Coded Phy support were
still setting the subscribe registers directly.
Let's use the nRFx HAL for this so it works properly also
in simulation.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Quite a few paths used only when there is Coded Phy
support were still setting the PPI directly.
Let's use the nRFx HAL for this so it works properly also
in simulation.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Invalid values should result in BT_HCI_ERR_INVALID_PARAM
The interval check should only fail with
BT_HCI_ERR_UNSUPP_FEATURE_PARAM_VAL if the requested range
cannot be fulfilled by the controller (ie. there is no overlap
with the supported range)
Fixes EBQ tests HCI/DDI/BI-53-C through HCI/DDI/BI-61-C and
HCI/CCO/BI-64-C
Signed-off-by: Troels Nilsson <trnn@demant.com>
Out-of-tree controllers do not necessarily mark the LE Set Host Feature
command as experimantal.
Add an additional entry to solve this like done for other ISO entries.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Add support for vendor specific Set Scan Request Reports command and
Scan Request Received Event, available for legacy advertising.
Signed-off-by: Giancarlo Stasi <giancarlo.stasi.co@gmail.com>
The FICR is also modelled in simulation, but changing this
conditional compile was forgotten, so it was only being
built for real HW.
A test had provided its own version of this function so it would
avoid a runtime warning due to the lack of static address. But
this needs to be removed as it conflicts with the function
provided now always by the nordic controller SW.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Move the nordic and openisa vendor file under ll_sw and add them back to
the list when building for nRF platforms, this was inadvertently removed
in
7bd2804c24 Bluetooth: Controller: Build vendor LLL as library
and is currently causing a:
<wrn> bt_id: No static addresses stored in controller
and random address on nRF devices.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
* Implement LL/IST/SNC/BV-01-C ISO Test Receive
* Refactor data structure for common code between CIS and BIS
Signed-off-by: Mads Winther-Jensen <mdwt@demant.com>
Build vendor LLL as separate library so that independent
compiler flags can be supplied if required.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit adds tx power config options for nRF54Hx and nrf54Lx
SoCs, as well as the new radio defines.
Signed-off-by: Kyra Lengfeld <kyra.lengfeld@nordicsemi.no>
This patch allows selecting the combination of `CONFIG_BT_RECV_WORKQ_BT`
and `BT_LL_SW_SPLIT`. The implementation of `bt_recv_prio` is copied
from `hci_raw.c`. This ensures the order of packets is the same as when
the controller's `hci_driver.c` is off-chip and sends HCI over UART.
Without this patch, the Zephyr LL driver will duplicate some events on
behalf of `hci_core`. This duplication is not wanted when
`CONFIG_BT_RECV_WORKQ_BT=y`.
The above mentioned duplication is not sound and is evidenced in logged
warnings, e.g. in `tests/bsim/bluetooth/host/l2cap/stress` with
`CONFIG_BT_RECV_WORKQ_BT=y` logging "no transition".
This patch is a step towards the deprecation of
`CONFIG_BT_RECV_BLOCKING`. `CONFIG_BT_RECV_BLOCKING` is complicated and
tightly coupled to `hci_core`. In the future, removing
`CONFIG_BT_RECV_BLOCKING` will give a cleaner separation between
`hci_core` and the drivers and allow `hci_core` to evolve without
changes spilling out into the drivers.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Fix CONFIG_BT_CTLR_TIFS_HW conditional compile by replacing
DPPI_PRESENT with CONFIG_BT_CTLR_TIFS_HW.
HAL_SW_SWITCH_TIMER_CLEAR_PPI can be same as
HAL_RADIO_END_TIME_CAPTURE_PPI, and this is ok as same
bit will be used to disable PPI/DPPI.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix LLL ISO stream get by group to return stream context
sorted by CIS offset in ascending order.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Before a LL_FEATURE_REQ is sent, verify that the Data Length Update
procedure is still supported as it could have been unmasked as the result
of a previously completed Feature Exchange procedure.
Add unit test to verify the case of enqueuing both a
Feature Exchange procedure and Data Length Update procedure, where the
Feature Exchange procedure would result in the unmasking of the Data
Length Update procedure.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Resume the TX Data Q when a LL_UNKNOWN_RSP is recieved instead of a
LL_PHY_RSP.
Update PHY Update unit test with more coverage of the TX Data Q pause
state.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Advertising data has to be truncated at a PDU boundary
Similar to earlier fix for extended advertising reports
Found in several EBQ tests, including LL/DDI/SCN/BV-25-C,
LL/DDI/SCN/BV-21-C and LL/DDI/SCN/BV-46-C
Signed-off-by: Troels Nilsson <trnn@demant.com>
This commit updates nordic lll controller to use
IRQ_DIRECT_CONNECT where applicable instead of
using IRQ_CONNECT with ISR_FLAG_DIRECT.
Signed-off-by: Radosław Koppel <radoslaw.koppel@nordicsemi.no>
Fix Periodic Advertising Synchronization leading to
Peripheral ACL connection supervision timeout, due to
direction finding related radio hardware registers being
updated in the implementation that is not built for
direction finding feature support.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enfore a range for BT_CTLR_ADV_AUX_SYNC_OFFSET such that
it does not take negative integer values.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix MFIFO_DEFINE to reduce FLASH usage by moving the pool
outside the struct that is static initialized.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing call to ull_chan_reset(), this fixes
uninitialized channel map being used after LL reset.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix RXFIFO_DEFINE to reduce FLASH usage by moving the pool
outside the struct that is static initialized.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix radio packet length configuration when first subevent
has empty PDU in the BIG event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ISO Synchronized Receiver sequential packing BIS PDU
being dropped in the first repetation just after previous
BIS subevents where skipped.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Broadcast ISO Create Scheduling to consider reducing
Host requested RTN value. And also use maximum overhead
calculation when Extended Advertising and Periodic
Advertising have not been started before BIG create.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect HCI ISO data length check for Broadcast ISO
transmissions.
Removed initially added code when preliminary support for
Broadcast ISO was implemented.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix double prepare overhead considered in scheduling
extended, periodic and ISO broadcast radio events when using
LOW LAT variant.
ticks_slot maintained in ticker includes the overhead, the
ticks_slot stored in role/state context exclude the overhead
hence take care to include ticks_slot_overhead when value is
used from context and not when value used from ticker nodes.
Add jitter due to ticker resolution unit between scheduled
radio events. This will allow the synchronizing side too to
not overlap due to ticker resolution related jitter.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ISO Synchronized Receiver sequential packing subevent
skip to next BIS subevent, so that radio channel is
correctly calculated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix assertion due to LLL scheduling of auxiliary PDU
reception was not considered in the ULL when checking for
accumulated data length exceeding the supported maximum scan
data length. This caused the auxiliary context to be release
while LLL was still active with scheduled PDU reception.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Instead of asserting, handle CIS creation latency for the peripheral by
finding next valid ISO event at which to start the CIG ticker.
Refactored calculations of the cig_offset to separate functions, to be
used also when calculating a new start offset.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix missing ISO Synchronized Receiver radio event time
reservation that did not calculate for all the subevents.
Introduce BT_CTLR_SYNC_ISO_RESERVE_MAX Kconfig option to
allow using a minimal time reservation if needed to allow
other role to pre-empt ISO Synchronized Receiver in
pre-transmission and control subevents.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for DYNAMIC_INTERRUPTS and ARM specific
DYNAMIC_DIRECT_INTERRUPTS.
Co-authored-by: Radosław Koppel <radoslaw.koppel@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ull_prepare_dequeue to not skip events when preempt
does not match the event in the head of the prepare queue.
The head of the prepare queue does not match when
ull_prepare_dequeue has put the head of the queue to the
last of the queue when it is calling lll_resume interface.
This happens when there is already an active event which
needs a preempt timeout to be setup and there is another
non-resume event in the pipeline which now becomes the
head. The fix ensure to restore the order of the events
if a preempt timeout was to be setup.
Currently ull_prepare_dequeue loops through all events
before stopping at the original way the queue was. This is
not efficient and is a scope for improvement in future.
This reverts commit 91781306e9 ("Revert "Bluetooth:
Controller: Fix ull_prepare_dequeue for skipped events"").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add functions to do XOR on arrays of memory, with one that
takes arbitrary sizes and one for 32 bits and 128 bits as
those are common sizes for this functionality.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If an instant based remote procedure 'overtakes' a local ditto
the local procedure will be 'completed' by remote rejection
but collision flag would not get set ensuring that a new local
conflicting procedure cannot be started before the remote is completed.
This can thus lead to invalid local initiation.
Added unittest to cover case
Fix by ensuring collision flag is set also in the above mentioned
scenario.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Revert back to implementation that did early abort of
previous prepare when a short prepare is enqueued.
Adds back implementation deleted in
commit 7f388bb70a ("Bluetooth: Controller: Fix short
prepare when many enqueued in pipeline").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Minor refactor of Kconfig order such that the advanced
feature Kconfig is just above the enabling/visible of the
advanced features menu.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to reduce CIG's CIS retransmissions so as
to meet the Host requested Maximum Transport Latency.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixes failing EBQ test LL/DDI/SCN/BV-88-C Extended Scanning,
Active, Properly Ignore RFU Fields
Several minor modifications made to le_ext_adv_report() to
properly ignore any invalid fields present in the received PDUs
Signed-off-by: Troels Nilsson <trnn@demant.com>
radio_pkt_big_ctrl_get() returns a statically allocated
buffer of type pdu_big_ctrl, but the callers expect a
buffer where a whole PDU for a BIG control packet can fit
(not just space for the payload),
and use it as such, overflowing this statically
allocated buffer, and smashing other variables after.
Let's fix it by allocating a buffer of the correct size
to fit a BIG control PDU.
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/64497
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
With very fast HCI interfaces (for ex. in the simulated nrf5340)
the tx_rate calculation can do a division by 0
(if to packets are enqueued in the same 32KHz clock period).
Let's avoid it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix missing Extended Advertising terminate event and
advertising scheduling not being stopped.
Under race conditions, auxiliary event is aborted without
the generation of done extra event which is suppose to
stop the scheduling when max events count is used.
The fix now generates the done extra event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix periodic advertising sync window calculation to include
the scheduling resolution margin, i.e. be double as with
the event jitter value.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix bitfield crossing byte boundary - replaced with macros for
setting/getting the values
Fix missing endianness conversion for evt_cntr
Changed aa from uint32_t to uint8_t[4] to align with the rest of
the code and avoid any potential endianness issues
Signed-off-by: Troels Nilsson <trnn@demant.com>
BT_CTLR_ISOAL_LOG_DBG_VERBOSE, BT_CTLR_ISO_TX_SEG_PLAYLOAD_MIN, and
BT_CTLR_CONN_ISO_AVOID_SEGMENTATION are very tied to the BT_LL_SW_SPLIT
implementation. It is very unlikely that these will ever be used by
another controller
Therefore move them out to the BT_LL_SW_SPLIT specific configuration
file. This will likely create less confusion when using another
controller.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Fix hung Controller when establishing CIS on an encrypted
ACL connection with Controller built with direction finding
support enabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The existing formula for the amount of data that can be filled
in in the current PDU is correct but confusing. Replace it with
a simpler formula.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Updates the chaining for advertising.
Instead of unconditionally adding a new PDU when new data
is added we now instead fill the last PDU in the chain with
the incoming data, only adding a new PDU when there is
not enough room.
This reduces the nr. of PDUs used for advertising, and also
fixes some qualification failures
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Fix leak in scheduled ticker node when rescheduling ticker
nodes.
Applications having active Extended Advertising or Observer
role with the use of ticker reschedule in window feature
would experience assertion check failure due to delayed
radio event preparation or stalled controller with no active
roles.
Fix updating of the ticker linked list when handling
rescheduled tickers.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When the legacy LLCP implementation was removed this Kconfig option was
mistakenly left over. Remove it now with all its users.
Fixes#63212.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Make the aa argument const to solve a Coverity issue
that assumes that any value that is being byteswapped
is tainted. Making the argument const should avoid
this assumption from Coverity.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix the coverity issue CWE570, comparison of unsigned int to 0
in the definition of IS_SYNC_ISO_HANDLE
There is a potentially the same issue for IS_ADV_ISO_HANDLE,
fixed that as well
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
In ll_setup_iso_path cis is only ever set if CONFIG_BT_CTLR_CONN_ISO
is enabled, and similarly adv_stream is only ever set if
CONFIG_BT_CTLR_ADV_ISO is enabled.
The two assignments were reported as dead code by Coverity due
to this, which has been fixed by guarding the code with
the respective Kconfigs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove the terminate_ack from struct ll_conn since it is
not used anywhere, and results in dead code.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix number of completed packets generated when BIS HCI ISO
Data packets sent to Controller are in fragments. Use the
ISOAL stored sdu_fragment count to generate the number of
completed packets count.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Kconfig option to turn off ISO Data Packet Sequence Number
use to place the ISO Data in the correct radio event,
instead simply buffer it to next radio event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ISO data timestamp to reflect the SDU reference point
and not the ISO event anchor point when PDUs received after
retransmissions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use of payload_count for supporting flush timeout in
Central and Peripheral ISO Lower Link Layer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix a clang warning
ull.c:1235: warning: use of bitwise '|' with boolean operands
The result of ({1/0} &&(int)) is either true(1) or false(0),
not the int and therefore bm is not a bitmask, but just true(1)
or false(0) all together.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For asymetrical features there needs to be a separate mechanism to
unmask features in peer. This must be used in central for unmasking in case
of 'unsupported in peer' condition for CIS Create.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
If a CIS create is requested prior to having a complete feature exchange
the central will initiate a feat exch before enqueing the CIS create.
IF then the feature exchange results in peripheral NOT supporting
CIS create the central needs to allocate an RX node for the NTF
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Fix ULL_HIGH ticker operations count, it is discovered in
new BabbleSim test implementations that mesh tests using
Extended Advertising and Scanning enqueue upto 4 ticker
operations before ULL_LOW ticker_job could process it.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix BIS implementation for checking overrun of the BIS PDU
sliding window buffer overrun.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add BT_CTLR_EVENT_OVERHEAD_RESERVE_MAX Kconfig to allow the
omit of EVENT_OVERHEAD_START_US and EVENT_OVERHEAD_END_US in
the time reservation calculations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Back-to-back Tx Rx implementation was incorrect for nRF53
that uses DPPI. Both current and next DPPI channels where
enabled in the implementation which only worked correctly
to have the right tIFS when current and next PDU length
were same.
Fix ensures that the correct current DPPI is subscribed
to by the radio subscribe.
The implementation has been refactor to be able to use the
current sw_tifs_toggle value in the HAL implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix CIS assymmetric PHY usage by adding implementation to
use correct PHY in radio when switching transceiver.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing NRF_CCM subscribe clear which can lead to
spurious trigger of TASK_CRYPT in NRF_CCM. This may
lead to corruption of Rx PDU buffers.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
hal_radio_tx_chain_delay_ns_get() was incorrectly
returning the microsecond value, resulting in a 1us
error in the timing => Fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Align the header a bit with the one for the real radio,
adding missing Tx power levels and removing TODO which did not
need doing.
The old one originated as a copy of the nrf52833 one, and did not
evolve like the real ones.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Remove a few macros which are not used anywhere in the tree.
For the sake of simplifying the header and easing its understanding.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The following changes have been done:
1.
HAL_SW_SWITCH_GROUP_TASK_DISABLE_PPI_REGISTER_TASK(index)
= HAL_SW_SWITCH_GROUP_TASK_DISABLE_PPI_TASK(channel)
has been convered into
HAL_SW_SWITCH_GROUP_TASK_DISABLE_PPI_REGISTER_TASK(index, channel)
2.
HAL_SW_SWITCH_GROUP_TASK_ENABLE_PPI_REGISTER_TASK(index)
= HAL_SW_SWITCH_GROUP_TASK_ENABLE_PPI_TASK
Which was only used in one place, has been replaced with the
equivalent HAL call
3.
HAL_SW_SWITCH_GROUP_TASK_ENABLE_PPI_REGISTER_TASK(index) = 0
was replaced with the HAL subscribe clear function
nrf_dppi_subscribe_clear(NRF_DPPIC,
HAL_SW_DPPI_TASK_EN_FROM_IDX(SW_SWITCH_TIMER_TASK_GROUP(index)));
4.
NRF_DPPIC->SUBSCRIBE_CHG[group].EN/DIS = 0;
have been replaced with the equivalent HAL clear call
5.
NRF_DPPIC->TASKS_CHG[group].DIS = 1;
have been replaced with the equivalent hal task_trigger() call
6.
Manually setting the CHG registers, has been replaced with a
clear + add (because the hal does not have a set function yet)
So,
NRF_DPPIC->CHG[group] = value
has been replaced with
nrf_dppi_group_clear(NRF_DPPIC, group);
nrf_dppi_channels_include_in_group(NRF_DPPIC, value, group);
(A set function has been requested from the HAL team)
Note: There is other direct registes writes to the dppi subscribe and CHG
registers in the coded phy parts which have not been changed yet.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix regression in sw switch single timer id use for nRF53x
series SoC.
Regression introduced in commit cfcbe5d68e ("Bluetooth:
Controller: Remove redudant header file includes").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rename the bsim header in preparation for having more
simulated targets.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
To avoid a build error when coded phy is not enabled
for a nrf53: These three functions are only used for coded phy,
and depend on macros which are only defined if coded phy
is enabled.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch use of kconfig:
* SOC_SERIES_NRF53X -> SOC_COPATIBLE_NRF53X
* SOC_NRF5340_CPUNET -> SOC_COMPATIBLE_NRF5340_CPUNET
to also select those options/code when building for
the nrf53 simulated targets.
Also switch three kconfig range dependencies from
SOC_SERIES_NRF52X to SOC_COPATIBLE_NRF52X
(IRQ priority related) for consistency. These sound
not really have an impact.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix assertion due to late Peripheral CIS active flag being
initialized. CIS active flag shall be initialized when it is
acquired.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Maximize BIG event length to extend upto ISO interval, and
allow PTO and Control subevents to be pre-emptible.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Calculate Broadcast ISO event overheads due to extended and
periodic advertising events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing Coded PHY implementation conditional compile
causing compile error when disabling Coded PHY support in
SoCs that have radio that support Coded PHY.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Revert EVENT_OVERHEAD_START_US value for Coded PHY support,
needed to pass LL/DDI/SCN/BV-21-C and LL/DDI/SCN/BV-25-C.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Reduce number of successive calls to ticker_job() by
disabling mayflies in the ULL_HIGH priority, enqueue
ticker_yield_abs() and ticker_start() before re-enabling
so that single ticker_job() handles both yield and start.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix short prepare handling when more than one event is
enqueued in the pipeline and the short prepare is placed at
the end of the prepare pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ticks_slot_window use in Observer, do not use for
unreserved continuous scanning, and do not use when scanning
on both 1M and Coded PHY simultaneously.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use ticker_ticks_diff_get consistently when calculating
difference between ticker ticks when determining short
prepare requests.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use the state/role context parameter in prepare pipeline
to identify the preempt timeout that was setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
These change are reverted as part of fixing regression
failure in LL/DDI/SCN/BV-21-C and LL/DDI/SCN/BV-25-C.
This reverts commit 0d54ca8761.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the order of setting the flag that indicates that
preempt timeout has been successfully requested versus
the request is waiting to be scheduled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ticker implementation to prefer to keep ticker node
started in case of race condition to start and stop.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Intent is to pass Ellisys ISOAL quality tests for framed TX scenarios
where the TX SDU includes a time stamp that is not based on the
controller's clock.
Changes:
-- Include controller's reception time as a separate field in the TX SDU
information
-- Include decision on whether SDU time stamp is valid and based on the
controller's clock
-- Arbitrate and select / compute time stamp for the SDU
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Changes:
-- Corrected reading and writing time offset in framed segment header to
account for endianness
-- Corrected bit positioning of time offset bit field in the segment
header structure definition
-- Fixed upstream Zephyr BSIM test build failure due to debug logging
39-bit variable
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Changes:
-- Disregards target event after segmenting the first TX SDU and instead
decide event based on the next payload and feasibility to fragment
for that event (time-offset > 0)
-- Corrected error SDU release logic when an error occurs while
expecting the start of a new SDU, to avoid releasing an SDU which
could be received in the next payload or event
-- Included additional debug logging
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Revert back the EVENT_OVERHEAD_END_US value to original
value in initial commit 5c3709c13f ("bluetooth:
controller: Add def's re. update to slot reservation calc").
40 us is a sufficient margin considering ~30 us being the
worst case Rx chain delay for S8 Coded PHY on nRF5x SoCs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Convert the driver to a dt-based device. Also update Kconfig so that it
depends on the right compatible being enabled, initialize in POST_KERNEL
(APPLICATION should not be used for devices) and remove one redundant
include.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Fix missing lazy calculation when using ticker interface
required for Central CIS create.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix initialization of CIS lazy_active event count used when
first CIS event is active. Now initialization for first and
any subsequent CISes made active.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix some compiler instruction re-ordering. Mayfly code with
cpu_dmb() help avoid stalled memq_ull_rx processing when
rx_demux is to be executed using mayfly.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use the HAL event clear functions to clear EVENTS
instead of accessing the registers directly.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Use the HAL event clear function to clear the RTC EVENT
instead of accessing the register directly.
This allows using an updated version of the RTC HW models
which generate level interrupts (as the real HW) and in
which if the EVEN register is not properly cleared,
the interrupts are kept high, resulting in the interrupt
handler reentering immediately after exiting.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The CIS Central uses the algorithm described in BT Core 5.4 Vol 6,
Part G, Section 2.2 to calculate the Max_PDU value for framed mode.
However, HAP needs the Max_PDU to be calculated according to "Core
enhancement for ISOAL CR" coming with the "Atlanta" update. With this
update, the fragmentation is controlled via a parameter at CIG creation.
Enabling CONFIG_BT_CTLR_CONN_ISO_AVOID_SEGMENTATION will set the
ISO_Interval to 7.5 ms for a 10 ms framed CIG, and calculate Max_PDU to
45/65 for 16/24 kHz.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Use NRF_CCM HEADERMASK register to use correct Additional
Authentication Data (AAD) from ISO PDU header.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix timestamp calculation to use CIS reference anchor point
instead of incorrectly used CIG reference anchor point.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect use of Max_SDU_Size and SDU_Interval parameters in
ISO Transmit Test Mode code.
Fixes EBQ test LL/CIS/PER/BV-08-C.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Added optional support for read ISO link quality command.
Added link quality member in struct ll_iso_stream_hdr.
Signed-off-by: Mads Winther-Jensen <mdwt@demant.com>
If there are duplicate handles the Controller shall return the
error code Invalid HCI Command Parameters (0x12)
Fixes a failure in the EBQ test LE/AdvExt/Req-01 (part of the Ellisys
quality test suite)
Signed-off-by: Troels Nilsson <trnn@demant.com>
Fixes some incorrect assertions in ull_adv.c on connection establishment
Note that the usual checks using adv->lll.conn doesn't work here,
since ull_periph_setup() NULLs the lll's conn structure pointer
before stopping the ticker
Signed-off-by: Troels Nilsson <trnn@demant.com>
rp_enc_state_wait_ltk_reply() is executed in thread context, so
it is not allowed to move the encryption state machine forward.
Defer LTK reply handling to next prepare event by introducing a continue
state.
Update the unit test to reflect this, and remove the TODO that actually
said there was an issue in the first place.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Prevent compiler optimizations from changing the order of assignments in
the ticker API transactions. This could cause lost operation requests
and unexpected behavior under certain race conditions.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Adds a target RPA known unknown cache; it fulfills a similar function
to the existing peer RPA cache, used for scanning of directed
advertisements
Signed-off-by: Troels Nilsson <trnn@demant.com>
- Fix masking for no coded phy
- Allow ISO_Interval < SDU_Interval for framed mode
- Change BT_HCI_ERR_INSUFFICIENT_RESOURCES to
BT_HCI_ERR_CONN_LIMIT_EXCEEDED.
- Prevent starting same CIS twice
- Cancel an initiated CIS creation procedure if terminated before
sending CIS_IND.
- Implement canceling of local CC procedure. Respond to CIS_RSP with
REJECT, if canceled after CIS_REQ was sent.
- Introduce state CIG_STATE_INITIATING for central, to keep track of
initiating CIS connection, in transition between CONFIGURABLE and
ACTIVE.
Fixes EBQ test /HCI/CIS/BC-03-C.
Signed-off-by: Morten Priess <mtpr@oticon.com>
When using the JIT scheduler (CONFIG_BT_CTLR_JIT_SCHEDULING), doing
ticker updates which only change the slot reservation, will fail.
For compatibility, the updates to ull.ticks_slot are preserved, as some
link layer implementations use this to predict collisions.
Signed-off-by: Morten Priess <mtpr@oticon.com>
When executing a local CIS_TERMINATE procedure, the reason sent to the
host must be changed to match the perspective of the initiator.
According to BT Core 5.4 Vol 4, Part E, section 7.1.6, the disconnect
reason must be BT_HCI_ERR_LOCALHOST_TERM_CONN for a local disconnect.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Do not assert in case of race conditions or asymmetric CIS
create/release. There are cases where ll_conn_iso_stream_get_by_group
legally returns NULL, and this should just cause for-loop continuing to
next iteration.
Signed-off-by: Morten Priess <mtpr@oticon.com>
To keep track of requested/pending CIS LLL flushing, change 'flushed'
binary state to 'flush' with states NONE, PENDING and COMPLETE.
This enables CIS teardown to know that a CIS already has a pending LLL
flush, and ULL does not need to initiate it.
Signed-off-by: Morten Priess <mtpr@oticon.com>
While the maximum sizes were already correctly checked by the code, the
minimum sizes of the PDUs were not. This meant that PDUs smaller than
the minimum required length (typically 6 bytes for AdvA) were
incorrectly forwarded up to the Host.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
To prevent failure stopping a ticker node after starting it within the
same ticker_job execution (queued operations), defer the stopping until
after start. This will sequence the operations correctly and prevent
failures.
Signed-off-by: Morten Priess <mtpr@oticon.com>
For config CONFIG_BT_CTLR_CONN_ISO_RELIABILITY_POLICY, set
CIG_Sync_Delay fixed as high as possible, and calculate FT by iteration.
This favors utilizing as much as possible of the Max_Transport_latency,
and spreads out payloads over multiple CIS events (if necessary).
Add exit with cleanup as ll_cig_parameters_commit may fail after
creating new CIG/CIS instances.
Fixes issue #59605.
Fixes EBQ test HCI/CIS/BI-12-C.
Signed-off-by: Morten Priess <mtpr@oticon.com>
There are some calls to ull_adv_aux_pdu_set_clear that are set to 0
but the argument is actually unsigned. This PR replaces the '0'
with '0U'
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
First implementation had a math error where the offset would be the
remainder from division (modulo). It should have been an ISO interval
minus the remainder. Refactored to not use modulo.
Signed-off-by: Morten Priess <mtpr@oticon.com>
In certain scenarios, the semaphore sem_ticker_api_cb may be taken
during attempt to complete a synchronous ticker operation such as start
or stop, but is never released via ull_ticker_status_give. This could
happen if ticker temporarily runs out of ticker operation slots for any
ticker client.
The consequence of ULL stuck waiting in semaphore is anything from
allocation assertions to watchdog timeouts.
This commit also sets a timeout on ull_disable calls, which relies on
the disable callback being invoked from 'done'. Invocation of 'done' is
mandatory, and code shall not allow that not to happen, but to avoid
hiding the real cause, the semaphore now has a timeout which causes
assertion in the location the issue occurred.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Check mayfly_is_running() to determine use of blocking- or non-blocking
version of lll_csrand, instead of k_is_in_isr().
As mayflies run in ISR context for Nordic platform, change will have no
impact on Nordic configuration.
For vendors using META_IRQ mayflies, implementation will now prevent
blocking and reduce latencies and jitter in soft-realtime code.
Signed-off-by: Morten Priess <mtpr@oticon.com>
The separate done memq was introduced to handle the old LLCP
stalling processing of the rx queue; This is no longer an issue with
the new LLCP, so we can remove it
Signed-off-by: Troels Nilsson <trnn@demant.com>
These configs are very tied to the BT_LL_SW_SPLIT implementation,
so it makes sense that these are only visible when that link layer is
used.
For the ones that may be used by other controllers in the future,
a dependency has been added.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Truncation of advertising data has to be done at a PDU
boundary; Including only part of a PDUs advertising data is
not allowed
Signed-off-by: Troels Nilsson <trnn@demant.com>
If the aux scanner already has CONFIG_BT_CTLR_SCAN_DATA_LEN_MAX
advertising data, there is no point in following an aux ptr -
instead flush the data and produce an incomplete report
Signed-off-by: Troels Nilsson <trnn@demant.com>
This commit adds missing tx power config options for nRF53x SoCs, as
well as the missing Radio defines for nRF53x SoCs.
Signed-off-by: Kyra Lengfeld <kyra.lengfeld@nordicsemi.no>
