Fix Connected ISO implementation to correctly handle SN,
NESN and payload_count when prepare callback is aborted due
to CPU overhead related latencies.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the EVENT_OVERHEAD_START_US verbose assertion to each
state/role LLL implementation so that correct state/role
that is delayed is conveyed in the assertion message.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add -ECANCELED on return from lll_preempt_calc so that
assert check can be placed in the prepare callbacks of the
state/role implementations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix to not use pre-programmed PPI when NRF_TIMER0 is not
used as the radio event timer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix CIS create implementation to consider CIG events with
laziness before the new CIS in an already active CIG is
made active.
Previous laziness value of the CIG events is determined and
at the CIG event where the new CIS event_count is calculated
the lazy_active value determined is decremented from the
total lazy value.
Without this fix, event_count of the new active CIS events
where incorrect, causing CIS create resulting in fail to be
established.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move BT_CTLR_SCAN_SYNC_ISO_SET to Kconfig from Kconfig.ll_sw_split
This means it can be used by other controllers and alligns with location
of other iso configs - e.g. BT_CTLR_SYNC_ISO_STREAM_COUNT
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
Fixing error: undefined reference to 'vs_set_min_used_chans'
when building with 'BT_HCI_VS_EXT' option disabled.
Signed-off-by: Michał Grochala <michal.grochala@nordicsemi.no>
Setting default value for BT_BUF_ACL_TX/RX_SIZE and
BT_CTLR_DATA_LENGTH_MAX to 37, as this will process the
incoming data the most efficient way.
When GATT is enable BT_BUF_ACL_RX_SIZE does not have to be 73,
as this will just give segmented messages for the public keys
exchange during provisioning.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
The debug pins were configured in a board specific file, however, the
subsys/bluetooth/controller/ll_sw/openisa/hal/RV32M1/debug.h file
already contains board-specific pins, meaning there's no need to split
the information in 2 places. Move the GPIO configuration calls to the
DEBUG_INIT() macro in the controller debug header.
Note that in the future, Devicetree should be used to provide a
hardware-agnostic debug module.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When config BT_CTLR_PERIPHERAL_ISO_EARLY_CIG_START is enabled, the
minimum accepted offset value in the CIS_REQ is the minimum defined by
the spec.
Add define CIS_MIN_OFFSET_MIN with value 500 us, as defined in the Core
spec. The previously used value of 400 us was incorrect.
Signed-off-by: Morten Priess <mtpr@oticon.com>
BlueZ stack in Linux distributions use disable all
advertising sets when advertising is turned off.
Add missing implementation to support disabling all
active advertising sets.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rework internal header files to not have includes, rather
have the required includes in the c source files.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In order to have clean, self-contained HCI headers that do not have any
dependencies towards the Host or any other part of the system (except
types), reorganize the headers in the following way:
- Split out the macros and structs from hci.h to a new hci_types.h
- Merge the existing hci_err.h into the new hci_types.h
Fixes#58214.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
As the coarse tick of ACL prepare and CIG prepare jitter by
+/- 1 tick, hence when initially scheduling the CIG place it
with enough margin so that cis_offset_min calculated when
there already exists a CIG can be larger than peer's
cis_offset_min being negotiated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrectly stored Broadcast ISO interval in
microseconds instead of storing in 1.25 ms units.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Introduce a Kconfig BT_CTLR_ISOAL_SN_STRICT to relax the Tx
ISO Data SDUs being dropped due to strict check of sequence
numbers in ISOAL, i.e. dropped when ISO Data SDUs are
delayed from upper layer with respect to the current
payload number in the ISO radio events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
-- Implemented reporting of lost / missing SDUs for framed PDUs. This
should result in SDUs being released when only framed padding PDUs or
error PDUs are received.
-- Removed unused configuration params structure, storage and linked
APIs.
-- Reduced default logging level to INF instead of DBG.
-- Included debug logging messaged for framed consumption.
-- Removed separate latency_unframed and latency_framed and replaced
with a common sdu_sync_const as they are mutually exclusive for each
sink.
-- Restricted framed time stamp calculation only to situations where all
dependent information is available.
-- Corrected SDU sequence numbering to release starting at zero.
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Based on interpretation of Clarification Errata ES-22876 Request for
Clarification - Recombination actions when only padding unframed PDUs
are received, it was decided that an SDU should be released as "Missing"
when only padding PDUs are received for any SDU.
- https://bluetooth.atlassian.net/browse/ES-22876
This change will also assist streaming in the Common Central design
where the central was found to send only padding PDUs before streaming
starts.
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
On CIS disconnect, the peripheral will clear all data paths.
However ll_remove_iso_path will fail if attempting to remove a
data path that has not been setup, so if only the CTLR_TO_HOST
direction was set, and the HOST_TO_CTLR bit was set, the
function returned an error and never attempted to clear the other
direction.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Up until now, it has not been possible to reconfigure a CIG and its
CISes after initial configuration, without first removing the CIG.
With this commit, le_set_cig_parameters allows the following
reconfiguration operations in configuration state:
- Set new CIG configuration parameters on existing CIG
- Iteratively configure single CIS (of more CISes)
- Increment number of CISes via multiple configuration calls
- Keep handle- and CIS_ID relation
Changes:
- Pass handles in le_set_cig_parameters from ll_cig_parameters_commit
via output variable.
- Implement CIG state variable instead of 'started', with states
IDLE/CONFIGURABLE, ACTIVE and INACTIVE.
- Implement ll_conn_iso_stream_get_by_id for easier access to specific
CIS.
This fixes the following CIS Central EBQ tests:
- HCI/CIS/BI-10-C
- HCI/CIS/BI-11-C
- HCI/CIS/BI-13-C
- HCI/CIS/BV-05-C
Signed-off-by: Morten Priess <mtpr@oticon.com>
According to the Core spec, the direction parameter passed to this function
should be bitfields, i.e.:
- BIT(0) : DIR_HOST_TO_CTLR
- BIT(1) : DIR_CTLR_TO_HOST
Signed-off-by: Morten Priess <mtpr@oticon.com>
This ensures that when running a combined host + controller build, the
ISO features in the controller are enabled automatically.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
The BT_CTLR_DF_SUPPORTED KConfig was a wrapper for DF related features
set that are supported by Zephyr's BLE Controller. At the same time the
KConfig is used by Host in compound build to enable BT_DF. That makes
the whole thing a bit coupled with Zephyr's controller.
External implementations of controller must provide same feature set
as Zephyr's Controller or there will be an error during build.
The PR moves the Zephyr's Controller DF supported features set to
Kconfig.ll_sw_split, where it is included only when BT_LL_SW_SPLIT
is selected. BT_CTLR_DF_SUPPORTED is now a top DF_SUPPORTED KConfig
option that enables possibility to select actual DF features.
That allows to select individual set of DF features by any controller
implementation and makes possible to enable BT_DF and build selected
DF Host features.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The scope for the burst number for tx and rx is currently at module
level in both lll_central_iso.c and lll_peripheral_iso.c
This PR puts the scope to the lll level
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Fix BT_CTLR_SW_SWITCH_SINGLE_TIMER to correctly disable the
PPI group used to switch radio Tx/Rx. The issue was
uncovered when adding coverage in BabbleSim test.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Prepare to replace HAL_RADIO_ENABLE_ON_TICK_PPI with
independent use of HAL_RADIO_ENABLE_TX_ON_TICK_PPI and
HAL_RADIO_ENABLE_RX_ON_TICK_PPI.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Central CIS SN and NESN for skipped events during CIS
setup. It is possible that CIG event may overlap the ACL or
other events at the CIS create instant, and hence have non
zero lazy value during the CIS setup events until CIS is
established.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix CIS offset_min calculation to consider that ACL interval
and ISO interval can be dissimilar and the offset value has
to be compensated for the latency until the instant at which
the offset is used.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix SN value on Peripheral CIS event abort. Adjust the SN
value based on the burst number such that the ISO data where
transmitted as normal.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix peer ISO feature support check, by using feature support
bit instead of whether locally supported bit value.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use swapped role specific features bit to calculate features
usable by local device, on feature exchange procedure.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Central ISO assetion failure on being established due to
regression in commit a53d89450a ("Bluetooth: controller:
fixing CIS establish flow for refactored LLCP") that
required changes due to Create CIS LLCP being refactored.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
On connection clean-up release nodes held by LLCP. These are released
in two steps, first on LLCP terminate (in local/remote) by moving
to rx/tx_node_release chains, and then on conn_cleanup_finalize
nodes are released back to appropriate mem-pool/queue.
Rename abort functions to refer to terminate.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Instead of using the node ref used for TX ack for storing a TX node
pre-allocated in case of NTF RX node availability delay, introduce a
separate store to TX node. This to avoid misunderstanding on clean-up
in terminate flow.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Latest modification to LLCP removed 'monitoring' of cis->established
flag in LLCP, relying instead on signal through ULL.
For this to work properly the signal must also be generated, so this is
introduced. Note - checking of cis->established flag could be removed
if caller ensures only calling once (on establish condition)
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
When possible re-use the already allocated RX node for notifications.
Store (retain) RX node and Link element on RX if NTF could occur.
Pass link element to LLCP (ull_cp_rx()) together with RX node.
New RX node type RETAIN introduced to signal retention
When no RX node is available allocate one and hold off TX on procedures
until such time that a node is available for NTF.
In case waiting for NTF buffer avail is needed, allocate and store TX
node to use for TX once NTF becomes available.
CIS Established (incl. timeout handling) is now handled entirely as a
specific event driven by ull_conn_iso - ie removal of procedure check
of cis->established and cis->expire, as this is doubling mechanism
in the conn_iso context.
Unit test and helpers updated to handle new node type.
Function ull_cp_release_ntf() was used only in unit test, so moved to
helper context.
Updating release_ntf to handle the fact that with piggy-backing in test
context the node used for NTF can be from two different memory pools
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
BT Core Spec states that feature exchange should be initiated if
not already performed. So in this case initiate feature exchange
and 'abort' enqueued CIS create if peer doesn't support CIS peripheral
feature
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Fix peripheral CIS receive window to consider that the
peripheral ACL could drift at the instant the CIS is being
established.
Hence add additional EVENT_TICKER_RES_MARGIN_US as receive
window length.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix use of uninitialized ticks_slot value in calculation of
cis_offset_min when creating CIS. Calculate the ticks_slot
value earlier when committing the CIG parameters.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Do not enqueue node rx buffers for generating invalid ISO
data from Tx ISR while supplying the node rx buffer to
Radio. This causes node rx pool corruption and also MIC
failures in the central ISO LLL.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix peripheral ISO data ack mechanism to correctly update
the SN when PDUs fail to be received.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When there is an active CIG for a new CIS create, then use
strict cis_offset_min/cis_offset_max so that the new CIS
is scheduled inside the active CIG event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Bitsets across byte boundaries does not work properly for big-endian;
Converted to use two uint8's instead
Signed-off-by: Troels Nilsson <trnn@demant.com>
Updated nRF5 Series LLL implementation to support multiple
peripheral CIS establishment from peer central devices.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Central multiple CIS create implementation using advanced
scheduling to find the active CIG events and calculate the
CIS offset to be used in the LL_CIS_REQ PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use accumulated connected ISO LLL prepare callback latencies
to check supervision timeout.
Also use the accumulated connected ISO LLL prepare callback
latencies to adjust SN and NESN values.
Connection establishment can cause short prepare callbacks
inserted before Connected ISO group prepare callbacks, that
cause the Connected ISO group prepare callbacks being
cancelled while being in prepare pipeline. Hence, it is
necessary to accumulate prepare callback latencies wherein
ticker callbacks are executed but prepare callbacks are
cancelled in the prepare pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implementation of preliminary Central with multiple CIS
create support in Lower Link Layer. Uses a simple CIS
offset calculation that works when ACL are created with
connection interval that is multiple of CIG ISO interval.
Each ACLs are offset using BT_CTLR_CENTRAL_SPACING hence
having the same CIG sync delay values for all the ACLs.
Advanced Scheduling to setup CIS in any order of ACL and
CIS combination, ACL placed anywhere in timeline and CIS
creation will come therein will be implemented in later
Pull Requests.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Include ticker expire remainder value when calculating the
cis_offset to acheive fine timing in scheduling the CIG
radio events relative to its associated ACL radio events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use the ticker_start_us() interface for Central and Central
ISO setup to acheive fine timing for the first expire
timeout.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
To acheive microsecond or fine timing for first expire
timeout, pass remainder value of the coarse tick to a new
ticker_start_us() interface. The new interface is available
with BT_TICKER_EXT feature enabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix implementation of CIS Null PDU Indicator use to meet the
BT Specification statement, that, if the source of the data
fails to provide a payload in time for a CIS subevent, then
the link layer shall transmit a CIS Null PDU instead.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is re-introduction of Extended, Periodic Advertising
and Broadcast ISO using ticker expire info feature to get
the aux, sync and BIG offsets.
Relates to commit 714d74b77b ("Bluetooth: controller: Use
new ticker feature to get offsets").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Ticker remainder and lazy get depends on match get interface
provided by BT_TICKER_NEXT_SLOT_GET_MATCH.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove redundant range and default for BT_CTLR_ADV_AUX_SET
when supporting BT_CTLR_ADV_PERIODIC.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
BT_TICKER_EXT is not supported with BT_TICKER_LOW_LAT.
Remove redundant select of BT_TICKER_EXT for
BT_CTLR_ADV_EXT.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Start/pause encryption should not be initiated on ACL with CIS
established (BT Core Spec 5.4, Vol 6, Part B, Sect. 5.1.3)
Adding test for the added procedure peek function
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Adds a Kconfig symbol which contains the default controller TX power
directly in dBm. This allows code to directly display/use the configured
power, instead of having to manually iterate over all the
`BT_CTLR_TX_PWR` options.
```
LOG_INF("BT controller configured for %ddBm TX power",
CONFIG_BT_CTLR_TX_PWR_DBM);
```
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Prevent referencing inactive CISes by clearing state variables
after teardown. This was seen as necessary when having CISes on
different ACLs, and disconnecting ACLs in random order.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Adds API for Periodic Advertising with Responses - Scanner:
- Synchronize to a PAwR train
- Choose which subevents to synchronize to
- Receive advertising reports from subevents
- Send responses
The support is enabled by CONFIG_BT_PER_ADV_SYNC_RSP, and requires
a controller that selects CONFIG_BT_CTLR_SYNC_PERIODIC_RSP_SUPPORT.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
Adds API for Periodic Advertising with Responses - Advertiser:
- Configure parameters
- Receive subevent data requests
- Set subevent data
- Receive response reports
The support is enabled by CONFIG_BT_PER_ADV_RSP, and requires
a controller that selects CONFIG_BT_CTLR_ADV_PERIODIC_RSP_SUPPORT.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
Use the minimum supported cis_offset_min considering that
ACL radio event does not overlap with CIG event. Use the
calculated maximum of local and remote cis_offset_min in the
Response PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Advertising PDU size calculation when direction finding
feature is enabled and PDU fragment count includes the
maximum CTE PDU chained. Fix removes redundant PDU count
included for Extended Advertising. Only Periodic advertising
PDUs chain CTE requires number of additional PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
A case of an invalid PDU was seen leading to a hit on this ASSERT, ie
this COULD happen. Refactoring of the state handling re. expectedness
in remote vs local request machines combined with ensuring the local
request machine ceases to expect PDUs when remote procedure 'takes over'
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Fix regression in refactored LLCP using uint16_t instead of
uint32_t in storing the win_offset_us value. This caused
connection update to fail with incorrect window offset being
used to schedule the connection radio events.
Regression since commit e1c2c36f56 ("Bluetooth: controller:
llcp: set refactored as default").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix window offset calculation which is missing the radio
rx ready delay timing be subtracted because the connection
offset from the start of the radio for scan window to the
end of the ADV_IND PDU includes the radio rx ready delay
timing, where as the determined window offset by advanced
scheduling calculates the offset from the ticks_at_expire
of the scan window to an active central connection's
ticks_at_expire.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update Advanced Scheduling implementation to use remainder
value in precisely calculating the connection request window
offset in microseconds.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the use of rx chain delay value used to calculate the
window offset into lll_scan_prepare_connect_req() instead of
current two places, one for legacy and other for extended
connection setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Find and match only Central role ticker when applying the
BT_CTLR_CENTRAL_SPACING value.
Use the EVENT_TICKER_RES_MARGIN_US value as +/- jitter
margin when ticker advanced scheduling is used to group
radio events.
When using CONFIG_BT_CTLR_CENTRAL_SPACING, do not add the
+/- jitter to the ticks_slot.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Included consideration for the packet sequence number and time stamps
together with the SDU interval in matching the event for fragmentation
of SDUs to unframed PDUs.
Implemented:
-- Increase in kconfig limit of BT_CTLR_ISO_TX_BUFFERS to allow full 32
buffers to be available for LL/CIS/PER/BV-39C
-- ISO-AL microsecond time wrapping exposed to be used externally to
adjust incoming Group Reference Points and Time-stamps where required
-- Function that handles adjustment of payload number according to
incoming SDU exposed for external use to allow next payload number to
be accessed by ISO transmit tests
-- Changed internal fragmentation source identification parameter from
the source structure pointer to the source handle so that only the
source handle needs to be used for external calls
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Many areas of Zephyr divide and round up without using the DIV_ROUND_UP
macro. Make use of it, so that we make use of a tested system macro and
at the same time we make code more readable.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The init infrastructure, found in `init.h`, is currently used by:
- `SYS_INIT`: to call functions before `main`
- `DEVICE_*`: to initialize devices
They are all sorted according to an initialization level + a priority.
`SYS_INIT` calls are really orthogonal to devices, however, the required
function signature requires a `const struct device *dev` as a first
argument. The only reason for that is because the same init machinery is
used by devices, so we have something like:
```c
struct init_entry {
int (*init)(const struct device *dev);
/* only set by DEVICE_*, otherwise NULL */
const struct device *dev;
}
```
As a result, we end up with such weird/ugly pattern:
```c
static int my_init(const struct device *dev)
{
/* always NULL! add ARG_UNUSED to avoid compiler warning */
ARG_UNUSED(dev);
...
}
```
This is really a result of poor internals isolation. This patch proposes
a to make init entries more flexible so that they can accept sytem
initialization calls like this:
```c
static int my_init(void)
{
...
}
```
This is achieved using a union:
```c
union init_function {
/* for SYS_INIT, used when init_entry.dev == NULL */
int (*sys)(void);
/* for DEVICE*, used when init_entry.dev != NULL */
int (*dev)(const struct device *dev);
};
struct init_entry {
/* stores init function (either for SYS_INIT or DEVICE*)
union init_function init_fn;
/* stores device pointer for DEVICE*, NULL for SYS_INIT. Allows
* to know which union entry to call.
*/
const struct device *dev;
}
```
This solution **does not increase ROM usage**, and allows to offer clean
public APIs for both SYS_INIT and DEVICE*. Note that however, init
machinery keeps a coupling with devices.
**NOTE**: This is a breaking change! All `SYS_INIT` functions will need
to be converted to the new signature. See the script offered in the
following commit.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
init: convert SYS_INIT functions to the new signature
Conversion scripted using scripts/utils/migrate_sys_init.py.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
manifest: update projects for SYS_INIT changes
Update modules with updated SYS_INIT calls:
- hal_ti
- lvgl
- sof
- TraceRecorderSource
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: devicetree: devices: adjust test
Adjust test according to the recently introduced SYS_INIT
infrastructure.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: kernel: threads: adjust SYS_INIT call
Adjust to the new signature: int (*init_fn)(void);
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fix the BIG handle in the HCI LE BIG Sync Established event
when BIG Create Sync operation is cancelled by Host.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ticker to explicitly trigger worker when ticks_to_expire
is less than or equal to elapsed time.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update ticker implementation to reschedule unreserved ticker
that use ticks_slot_window.
This will avoid unreserved ticker from continuously
overlapping with reserved tickers. And the change is
required to reduce processing overheads before reserve
ticker timeout callback executes.
Unreserved tickers with ticks_slot_window will always yield
to any colliding reserved or unreserved tickers.
The implementation moves unreserved tickers (no ticks_slot
value, in this case continuous scan window) to end of a
colliding reserved/unreserved ticker so that reserved
tickers (like central role) do not have high overheads due
to unreserved ticker's prepare (scanner) be preempted
everytime before reserved ticker's prepare (central).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated the 3 places in extended advertising where the ticker was
previously inquired about the expiration of another ticker ID in a
separate mayfly (adv_aux, adv_sync and adv_iso). It will now use the
new ticker feature where another ticker IDs expiration info will be
added to the callback.
Channel map updates are now handled in ticker_cb and applied immediately
if the ticker is not running
Signed-off-by: Troels Nilsson <trnn@demant.com>
It is now possible (via the extended ticker interface) to ask for
expiration information for another ticker ID to be returned in the
ticker callback. This utilises the extended ticker interface and a
callback function with a different context to keep the current ticker
interface as unchanged as possible.
Signed-off-by: Troels Nilsson <trnn@demant.com>
Move the SoC Flash nRF sync ticker implementation into
Bluetooth Controller Subsystem folder, as internal headers
are included.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the Bluetooth Controller's CMakelists.txt to
consistently use zephyr_library_sources_ifdef() and
zephyr_library_include_directories_ifdef().
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add check in CMake files to prevent resource overlap for
TIMER0, TIMER1, RTC0.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In general, RTC and TIMER driver implements counter API but there
are exception when those peripherals are used in a custom way
(e.g. for system timer or bluetooth). In that case, system must
prevent using counter based on a reserved instance. Previously,
it was managed by Kconfig options but that cannot be maintained
when switching to devicetree configuration of the counter driver.
A new approach removes Kconfig options and instead adds static
asserts in the files which are using direct peripherals. Those
asserts check if given node is not enabled in the device tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Implement a custom abort_cb callback to perform Tx and Rx
flush and adjust the SN/NESN values.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ull_prepare_dequeue to not skip events when preempt
does not match the event in the head of the prepare queue.
The head of the prepare queue does not match when
ull_prepare_dequeue has put the head of the queue to the
last of the queue when it is calling lll_resume interface.
This happens when there is already an active event which
needs a preempt timeout to be setup and there is another
non-resume event in the pipeline which now becomes the
head. The fix ensure to restore the order of the events
if a preempt timeout was to be setup.
Currently ull_prepare_dequeue loops through all events
before stopping at the original way the queue was. This is
not efficient and is a scope for improvement in future.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Connected ISO time reservation that was missing the
event start and end overhead values.
Fix missing event end overhead values in ACL connection
time reservation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Calculate CIS offset of secondary CIS(es) using CIG reference point.
This fixes issue with e.g. two CISes associated with separate ACL
connections.
Signed-off-by: Morten Priess <mtpr@oticon.com>
This commit enables having multiple CIS/CIG setups/connects and
teardowns in sequence.
- For central, cig->lll.num_cis is initialized to cis_count and
untouched until ll_cig_remove. The value shall indicate number of
allocated instances, to ensure correct CIG traversal.
- Keep CIG/CIS instances for central until ll_cig_remove
- Initialize CIS instance state vars in ll_cis_create, similar to the
peripheral flow.
- In ll_cig_remove, always release streams and CIG instance. Do not
remove paths, as this is done from host at bt_iso_chan_disconnected.
- Remove unsued cis_count member in ll_conn_iso_group.
- Use correct function ull_iso_lll_ack_enqueue at LLL flush to have
data path respected.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Some recent PRs included conditional compilation for
KCONFIG_BT_LL_SW_LLCP_LEGACY, which must be removed.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
The slot reservation code is only valid for the refactored LLCP;
a guard was in place to ensure that it was not compiled in for
legacy controller code. This commit removes this guard
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
This commit removes the code related to advanced scheduling from
ull_sched.c, since this code only works for the legacy controller.
Implementing advanced scheduling for the refactored LLCP is tracked
in its own issue
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
The code that was added for delaying notifications to the host,
which was only implemented for legacy controller, is removed
in this commit
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
This commit removes the legacy LLCP code including the
Kconfig option
It also updates the babblesim tests, and removes the
tests for the legacy controller
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Remove redundant use of local variable chan_idx in the
lll_chan_iso_subevent() function.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
For ISO-subevents channel selection must use remap table always
-regardless of channel is a mapped or unmapped channel.
Signed-off-by: Henrik Møller <heml@demant.com>
To enable Bluetooth controller coexistence feature, there is
implementation of ticker task, which aborts any ongoing radio events
during assertion of the grant pin. This solves the co-existence issue
in the role of the subordinate transceiver.
Signed-off-by: Tomáš Beneš <tomas@dronetag.cz>
Remove redundant EVENT_IFS_US used in Control PDU timing
calculation. The BIG radio event ends with Control Subevent
and hence there is no need to add EVENT_IFS_US at the end
of the BIG event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ISO Sync Receiver PDU reception to enqueue towards ULL
any PDUs that where received before the BIG event in
unreserved timespace is aborted due to overlap with other
radio events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Avoid the use of weak functions and call the respective functions only
if vendor-specific data path is supported. The weak dummy functions
will not implement the desired behavior anyway. This change makes it
explicit that these functions need to be implemented by the vendor.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Implemented:
-- Released framed padding PDUs when data received in SDUs for a given
event do not fully utilise BN.
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Inherit BT_ISO_TX_BUF_COUNT value when BT_ISO is enabled
to set BT_CTLR_ISO_TX_BUFFERS count.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing radio configuration that limits the maximum PDU
len on reception to consider that Control PDU can be larger
than the max PDU size in the BIS parameters.
Use dedicated PDU buffer for transmission and reception of
BIG Control PDUs so that it is independent of maximum ISO
PDU length which can be less than BIG Control PDU length.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When vendor specific commands are disabled by setting
BT_HCI_VS=n the host still calls bt_read_static_addr,
but that function is not compiled in, resulting in a
build error.
Fixed by moving the code in controller/hci/hci.c
outside of the conditional compile
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
[216/319] Building C object zephyr/subsys/bluetooth/controller/
CMakeFiles/subsys__bluetooth__controller.dir/hci/hci.c.obj
zephyrproject/zephyr/subsys/bluetooth/controller/hci/hci.c:
In function 'hci_vendor_cmd_handle_common':
zephyrproject/zephyr/subsys/bluetooth/controller/hci/hci.c:5459:17:
warning: implicit declaration of function 'vs_set_min_used_chans';
did you mean 'll_set_min_used_chans'? [-Wimplicit-function-declaration]
5459 | vs_set_min_used_chans(cmd, evt);
| ^~~~~~~~~~~~~~~~~~~~~
| ll_set_min_used_chans
....
zephyr-sdk-0.15.0/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.1.0/../
../../../arm-zephyr-eabi/bin/ld.exe: zephyr/subsys/bluetooth/controller/
libsubsys__bluetooth__controller.a(hci.c.obj): in function
`hci_vendor_cmd_handle_common':
zephyrproject/zephyr/subsys/bluetooth/controller/hci/hci.c:5459: undefined
reference to `vs_set_min_used_chans'
collect2.exe: error: ld returned 1 exit status
ninja: build stopped: subcommand failed.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Fix scan window value corruption due to modification of
stored ticks_window value when enabling continuous scan.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Latest modification to LLCP removed 'monitoring' of cis->established
flag in LLCP, relying instead on signal through ULL.
For this to work properly the signal must also be generated, so this is
introduced. Note - checking of cis->established flag could be removed
if caller ensures only calling once (on establish condition)
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
When possible re-use the already allocated RX node for notifications.
Store (retain) RX node and Link element on RX if NTF could occur.
Pass link element to LLCP (ull_cp_rx()) together with RX node.
New RX node type RETAIN introduced to signal retention
When no RX node is available allocate one and hold off TX on procedures
until such time that a node is available for NTF.
In case waiting for NTF buffer avail is needed, allocate and store TX
node to use for TX once NTF becomes available.
CIS Established (incl. timeout handling) is now handled entirely as a
specific event driven by ull_conn_iso - ie removal of procedure check
of cis->established and cis->expire, as this is doubling mechanism
in the conn_iso context.
Unit test and helpers updated to handle new node type.
Function ull_cp_release_ntf() was used only in unit test, so moved to
helper context.
Updating release_ntf to handle the fact that with piggy-backing in test
context the node used for NTF can be from two different memory pools
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Fix Extended Scanning support for BT_CTLR_LOW_LAT variant
of the Controller implementation by closing the scan window
for every ADV_EXT_IND PDU received that that ULL_LOW context
is enabled back and ticker job can process the request to
start auxiliary PDU reception. Without the change the
ticker job would only run at the end of the scan window that
caused the auxiliary scan prepare to assert due to delayed
ticker timeout expiry callback.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In ull_llcp* some functions used in unittesting did not have
the llcp_ prefix
Although this is not a big issue since they are only used when
testing the module this commit adds the prefix so that we
have a more consistent naming
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Update unittests for the following areas/controll procedures
- API
- collision handling
- invalid PDUs
- unsupported procedures
- buffer allocation
- TX queue
- Data Length Update
- PHY update
- Encryption
- Ping
- Version
- Channel map update
- Min. used channels
- Connection update
- SCA
- Terminate connection
- CTE request
- CIS create
- CIS terminate
Also moved the internal API tests from the ull_llcp* files
to the proper unittest C-file
Unused files are removed
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Fix mayfly_prio_is_equal() function when BT_CTLR_ZLI is
enabled.
When Zero Latency IRQs are used, LLL execution priority
is the Zero Latency IRQ priority and will not be equal
to ULL execution priority.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Peripheral CIS supervision timeout due to missing access
address timestamp capture in subsequent subevents when
anchor point was not sync in the first subevent.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The Bluetooth 5.4 specification was recently released, and has a new
version identifier (0x0D or decimal 13) assigned to it in the
Bluetooth Assigned Numbers.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
In the switch statement there are two cases guarded by ifdef's.
These cases are not compiled in for the following Kconfig settings:
BT_PERIPHERAL=n
BT_CTRL_PER_INIT_FEAT_XCHG=n
The following function call then becomes dead code
This is fixed here by adding the proper guards around the whole case
statement
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Fix AUX_ADV_IND AUX_SYNC_IND radio utilization by having a
configurable offset.
Define an offset between AUX_ADV_IND and AUX_SYNC_IND when
using Advertising Interval for the Extended Advertising and
Periodic Advertising that are same or multiple of each
other, respectively.
Note, to get advertising intervals that are same or
multiple, the Periodic Advertising Interval shall be 10
millisecond more than the Extended Advertising Interval;
this is because the AUX_ADV_IND PDUs are scheduled as
periodic events of Extended Advertising Interval plus 10
milliseconds (Advertising Random Delay) as the periodic
interval.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the Close Isochronous Event (CIE) implementation so that
it follows the Bluetooth Core Specification definition:
Link Layer implementations will normally end a CIS event
early when all scheduled payloads in both directions have
been transmitted and acknowledged.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rename lll_df_conf_cte_tx_disable() to lll_df_cte_tx_disable()
so that it can be used as a common function between connection
and connectionless implementations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a DSB before doing WFE in cpu_sleep(), to ensure the
memory transactions are complete.
Add a note clarifying a dependency for the existing solution
(dependency is satisfied by ARCH code but is good to state
clearly).
Relates to commit f1264b7e47 ("drivers: entropy: nrf5: add
docs and a DSB in get_entropy_isr").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixing typo in llcp_lp_cc_established revealed the need for completing
the CIS establishment procedure by additional call to local/remote
check_done function.
Fixed by exposing lr_check_done and rr_check_done with naming update and
calling after injecting the CIS_ESTABLISHED event.
Signed-off-by: Morten Priess <mtpr@oticon.com>
If CIS offset in LL_CIS_IND is less than EVENT_OVERHEAD_START_US, the
controller is not able to establish the CIS in the ACL connection event
specified, but needs to start setup one connection event earlier.
With this commit, if offset is larger than EVENT_OVERHEAD_START_US the
first CIS event can be prepared in due time immediately.
This enables the controller to setup first CIS, even when instant is
equal to the ACL event_counter.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix Periodic Advertising time reservation when enabling with
ADI support. As the PDU is updated, use the updated PDU to
calculate the time reservation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to schedule BIG events after Periodic
Advertising when Periodic Advertising is enabled after
Extended Advertising has already been enabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
As the range of ticker_id has been checked, context specific
get interface be used instead of doing range check again in
ull_hdr_get_cb().
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix auxiliary PDU time reservation calculation to reserve
for possible increase in PDU len due to updates to data in
the Common Extended Header Format of the PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix assertion due to delayed prepare of first BIG event when
supporting encryption. Crypto calculation introduce extra
processing delay causing the scheduling of first BIG event
to be delayed. Detect such delay and skip to next ISO
interval.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the access address and radio ready timestamp to derive
the value of the first subevent, so that correct anchor
point reference is used in scheduling subsequent subevents.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix uninitialized CIS LLL structure member variables,
uninitialised CIS acl_handle causes HCI command disallowed
for acl_handle's other than 0x0000.
Initialize other variables like sn, nesn etc. when create
CIS control procedure is performed.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Redefine mask of host-controlled feature bits to include only features
that are supported by the controller. This fixes a conformance test
failure where setting an unsupported host-controlled feature bit was
not rejected as it should.
Set the Connected Isochronous Streams (Host Support) bit from the host
only if unicast support is configured to avoid failures in
broadcast-only configurations.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Fix advanced scheduling to consider active BIG events when
establishing new Central connections. This will schedule
AUX_ADV_IND, AUX_SYNC_IND and Central connections of similar
interval to be non-overlapping.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update advanced scheduling implementation to consider other
active BIG events when scheduling new BIG instances.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix sn and nesn values of ISO data when starting a new burst.
When central retransmitted but did not get an ack, it did
not update the sn correctly causing the peripheral to drop
the next ISO data PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The address type in the periodic adveritising sync
established event is incorrectly set to 0x01
(BT_ADDR_LE_RANDOM) when the address is a resolved one,
where it should have been BT_ADDR_LE_RANDOM_ID.
The address type has been fixed by offsetting by 2 to get
BT_ADDR_LE_PUBLIC_ID or BT_ADDR_LE_RANDOM_ID when the
address has been resolved.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing DF related Radio register reset on radio_reset().
Regression in commit 465a96181d ("Bluetooth: Controller:
Explicitly set all bits of used radio registers") due to the
removal of NRF_RADIO->POWER register use that was used to
reset all Radio registers on every new Radio Event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Workaround sequence number misalignment to ISO event count
when ISO data is supplied in bursts, example through USB.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove BT_HCI_DATAPATH_ID_DISABLED define as 0xFF, which is
reserved for future value for Data_Path_Id parameter.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
- Include ISO stream count in ISO streams definitions in
controller.
- Create ISOAL source on controller when ISO data path is
setup.
- Send broadcast data buffers transferred from host over
HCI to ISOAL as ISO SDU fragments.
- Allow bot conn and ISO data to use data_buf_overflow.
- Store ISO interval during BIG create.
- Remove ISO data path for each BIS during BIG terminate
procedure.
- Set value (temporarily) for ISOAL target_event enabling
it to Tx data.
- Check status of data fragment sent to ISOAL for memory
allocation and other errors.
- Destroy ISOAL source when ISO stream released.
- Use ISO Advertising handle, not stream handle to destroy
ISO data path.
- Remove extra ISOAL sink destroy call when removing ISO
data path.
- Add FIXME comment as reminder to address LL_ASSERT on
isoal_status error.
Signed-off-by: Carl Stehle <droid@appception.com>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix calculation of ISO interval such that multiple bursts
can be transmitted per ISO interval. This means we can now
have SDU_Interval < ISO_Interval and more than one SDU will
be transmitted in each ISO_Interval.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing jump to Rx ISR done that caused the Control PDU
to be enqueued as ISO data PDU, causing the ISOAL to assert
on receiving invalid LLID.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ISO timestamp wrap around which caused ISOAL to assert
checking for valid timestamp.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Define a internal BT_CTLR_ISO_TX_BUFFERS to allocate ISO Tx
buffers used for Broadcast and Connected ISO.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix race between isoal_source_deallocate() and
isoal_tx_pdu_emit(). Initiating a local initiated terminate
triggers NULL pointer dereference.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor ll_setup_iso_path to support Synchronous Receiver
and Connected ISO to be built together.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix uninitialized CIG ULL reference count when creating a
CIG after a previous disconnection.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix CIS and CIG teardown in Central and Peripheral Role.
cig->lll.num_cis value is used in peripheral role to count
active CISes, and cig->cis_count is used in central role.
Both central and peripheral will stop ticker for CIG when
num_cis and/or cis_count is zero, respectively, but only
peripheral role will release a CIG context. The Central
will keep the CIG context allocated and only mark it as
not started. Remove CIG command will be used for central
role to release a CIG context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix CIS ISO Tx buffer leak on terminate when the datapath
has been deallocated.
Add a FIXME comment regarding ll_tx_ack_put() being called
from LLL execution context, while it is a ULL callable used
by ACL connections to dispatch ack.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Do not call util_aa_le32() from ISR context as random number
generation in entropy driver on nRF5x series invokes
k_sem_take.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix assertion check on link_tx_free when CIS is created a
second time. The Tx mem queue has to be initialized on every
new CIS create as CIS disconnect does the deinitialization.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Reorder the functions in ull_central_iso file to match the
order of HCI commands in the BT Spec.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Workaround the access that check if datapath is NULL when
the stream has already been released. Memory Pool overwrites
first 8 bytes to maintain the free list and free count. This
causes the datapath fields if placed in the first 8 bytes to
not be NULL after the memory is freed.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add code to generate ISO data buffer overflow event if more
than allocated ISO data PDU buffers are tried to be
requested by host or for SDU fragmentation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use instant_latency at the CIG start event count to detect
skipped connection event around the instant. In the future
add implementation to compensate for skipped ACL connection
event and adjust the CIS event count at CIG start.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Reuse ull_conn_event_counter() function in LLCP
implementation to get the current radio event counter value.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix CIG offset such that it follows after the ACL connection
time reservation to avoid overlapping.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add LLL interfaces implemented by ULL to get group by stream
and to get stream by group iterator functions.
Rename function to set CIS established to reflect that it is
LLL accessible.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix channel indices calculation implementations conditional
compile so that it can be reused for Connection ISO events
and subevents.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add interface to have separate Tx and Rx packet timer status
reset, so that packet timer can be setup ahead in time for
starting the Tx or Rx subevent and status reset only clears
the respective PPI/DPPI that was used when Tx or Rx
completes.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use BT Spec. defined abbreviations for number of subevents
(nse), burst number (bn), flush timeout (ft) etc.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update Kconfig to list Central and Peripheral ISO as
supported. Will continue to be listed as Experimental.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add conditional compilation for Peripheral ISO support,
use CONFIG_BT_CTLR_PERIPHERAL_ISO.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Re-arrange include in ull_peripheral_iso file to be
consistent with other similar files (ull_central_iso).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rename LAST_VALID_CIS_HANDLE to LL_CIS_HANDLE_LAST, to be
consistent naming with LL_CIS_HANDLE_BASE.
Add IDX_FROM_HANDLE defines.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the Connected ISO group and Connected ISO stream
context to be consistent in defining the bitfields and also
rearrange structure members.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing BT_LL_SW_LLCP_LEGACY cond compile causing
compile error when building Peripheral ISO samples with
legacy control procedure implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When a maximum duration or number of advertisements has been set for an
advertisement set, we will exceed that limit if the last advertisements
happen to be overlapping (ie. we have two primary advertisements pointing
to the same AUX_ADV_IND).
We now have a check in the ticker_cb that will ignore the callback if the
state is such that advertisement would have been stopped if ull_adv_done()
had been allowed to run in the meantime.
Signed-off-by: Troels Nilsson <trnn@demant.com>
Implementation of Broadcast ISO encryption using crypto
toolbox function h8. And support for encryption in lower
link layer for nRF5x series.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Make Data, ISO, BIS and CIS PDU structure's octet 3 vendor
specific.
This will allow vendors not supporting the octet 3 or
CTEInfo (8 bits) to save 1 octet in their PDU structures.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to parse ACAD and find the BIGInfo before
setting up Broadcast ISO Synchronization.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The nRF HW models have been updated to correspond to a 52833 instead
of a 52832. Let's follow them.
The motivation for the change is to enable proper BIS encryption support
(for BT LE Audio ISO).
Changes:
* Point in manifest to latest HW models
* SOC_COMPATIBLE_NRF52832 has been removed, and SOC_COMPATIBLE_NRF52833
added in its place (with no uses at this point)
* Where SOC_COMPATIBLE_NRF52832 was used to set encryption like for a 52832
(to avoid using the MAXPACKETLENGHT), we set the condition to just
SOC_NRF52832.
Note: The MAXPACKETLENGHT register exists in the new simulated nrf52833,
thought it does nothing.
* In the BLE ctrl LLL radio HAL, all macros are renamed accordingly
(timings are NOT changed).
* Board dts definition now refers to the 52833 soc definition. New 52833
features set as not supported by now.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Legacy Control Procedure fix. Fix missing release of the
node rx allocation that was reserved at the start of the
LE Connection Parameter Request procedure and the procedure
ends with reject indication transmitted to the initiating
peer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix filter accept list and privacy feature Kconfig default
based on whether host has them enabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When removing a CIG, the instance and associated CIS instances were not
always released. This causes repeated Create_CIG/Remove_CIG operations
to fail assertion with resource error.
Enables CONFIG_BT_CTLR_CENTRAL_ISO in bsim_test_audio.
Fixes issue #53301.
Signed-off-by: Morten Priess <mtpr@oticon.com>
New LLCP will process the CIS establishement in the TX path, meaning it
will only process once every ACL connection interval.
If ACL connection interval is significantly longer than the ISO
interval, CIS packets corresponding to the ACL connection interval will
be lost. This may cause latency in audio rendition.
By processing the CIS establishment in the RX path, notification will be
sent immediately, and audio path is enabled fast to reduce latency.
When a CIS fails to establish, the controller shall complete the
procedure by sending a CIS_ESTABLISHED event containing the error.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Disconnect CIS immediately if event done extra status indicates MIC
failure. Return reason BT_HCI_ERR_TERM_DUE_TO_MIC_FAIL.
Fixes EBQ test /LL/CIS/PER/BV-27-C.
Signed-off-by: Morten Priess <mtpr@oticon.com>
When the 'instant' of a CIS is postponed by increasing the conn_event of
the CIS_RSP compared to CIS_REQ, the CIS offset shall be calculated as
an equivalent window offset by an integer number of ISO intervals.
This is obtained by increasing the CIS_Offset_Min and CIS_Offset_Max by
the modulus of the connection interval delay time.
Signed-off-by: Morten Priess <mtpr@oticon.com>
To be able to timely start the first CIS/CIG, if the requested instant
is the next connection event, call ull_peripheral_iso_start directly
from rp_cc_state_wait_rx_cis_ind instead of waiting for next time
through the state machine.
To enable ULL/LLL to prevent adding latency when LLCP is waiting for
instant, local- and remote procedures with instant now expose a function
for checking this state.
Fixed event_counter function to prevent one-off in RX path. Unified to
use single function ull_conn_event_counter.
Fixed LLCP unit tests and added new mock function.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Add check preventing Out of band access. There are tests trying to
access out of band handle like:
test_sink_invalid_ref and test_source_invalid_ref trying to access
handle 99.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use the maximum data PDU size time reservation space
considering the Data length could be updated from default
27 bytes to maximum support size.
If maximum time reservation is disabled then time space
reservation corresponding to the default data length at the
time of the start/enable of Central role is used.
Note, currently this value is only used to space multiple central
connections and not for actual ticker time reservations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix connection parameter request procedure to be cacheable
if a remote control procedure is in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix legacy control procedure implementation to avoid
connection update procedure with reason instant passed
(0x28).
Connection Update Indication PDU is enqueued after data
enqueue to LLL context is paused and the enqueue resumes
when already enqueued data PDUs are all acknowledged.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Since the event length update is not necessarily an improvement
in all situations a Kconfig option is added so that it can
be disabled for the users that do not need it.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Fix the controller implementation to perform connection
event length reservation based on the completed Data Length
Update and/or PHY Update Procedure.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Proper handling re. non-supported CIS TERMINATE
This fixes EBQ test LL/PAC/CEN/BV-01-C on the general level.
'Replaces' #ee2a43b5dcf884730130345c402d87b2bce9dba1
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Fixes#53786
The variable slot_plus_us is assumed to be a number in us unit.
To assign the maximum possible CTE length to this variable,
BT_HCI_LE_CTE_LEN_MAX has been used while this parameter is defined
in a 8us units (it's 0x14=20 that corresponds to 160us).
To convert this number to us, it's needed to be multiplied by 8.
Signed-off-by: Saleh Mehdikhani <saleh.mehdikhani@unikie.com>
Fixes two issues with the JIT scheduler:
Rescheduling of primary advertising packets for extended advertising
when using the JIT scheduler did not work, since the done events for
the primary events never made it into the reschedule logic
The EVENT_DONE_EXTRA_TYPE_ADV_AUX event (for auxillary packets) could
cause a "reschedule" for a primary event that was actually sent
successfully (causing it to be sent twice)
Signed-off-by: Troels Nilsson <trnn@demant.com>
The status field is currently a uint32_t even though there are only
3 possible values. Reducing it to a uint8_t allows status to fit in
existing padding in the struct, saving 4 bytes per ticker_user_op
Updated function signatures to match; ticker_op_func left as-is
to avoid having to update a whole bunch of files for no real benefit
Signed-off-by: Troels Nilsson <trnn@demant.com>
Fix MIC failure transmitting LL_CIS_REQ PDU.
The MAXPACKETSIZE value was not set with using Long Control
PDUs.
Relates to commit e895948047 ("Bluetooth: Controller: Add
Long Control PDU support").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove duplicate PPI/DPPI configuration in
radio_tmr_start_now() which reuses radio_tmr_start_us().
And other minor refactor to remove unnecessary conditional
compilation of a define.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix compilation error for ISO Broadcaster with dynamix Tx
power support, and remove setting tx power for ISO
Synchronized Receiver.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated implementation to save power consumption by
scheduling BIG event starting at the first BIS selected for
synchronization. Also, skip reception of any unselected
BISes in between multiple BISes that the Broadcaster is
transmitting. Added advance calculation of next subevent
channel index.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
From Bluetooth Core Specification v5.3 Vol 6 Part B Section
4.4.6.8 Channel indices,
The subevent number se_n shall be set to the values 1 to
NSE, in order, for the subevents on a given BIS - the same
values shall be used for all the BISes in a BIG - and to 1
for the control subevent.
Hence, fix implementation to reset back to se_n to 1 when
next BIS PDUs are transmitted in the subevents.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix broadcast ISO PDU receive connection handle. The look up
was using BIS index instead of the index of the selected
stream that is being received.
Example, when receiving BISes 2 and 4, only the connection
handle for BIS 2 was correct and connection handle lookup
was out-of-bounds for BIS 4; symptoms being that Host
dropped the received ISO PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Budget for one extra ISO Rx PDU buffer for empty/NULL PDU
reception that has to always remain free in order to be able
to setup radio h/w for new PDU receptions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix compile error building application with
BT_LL_SW_LLCP_LEGACY. Request Peer SCA command is not
supported in legacy control procedure implementation.
Relates to commit 76439d0ba4 ("Bluetooth: controller:
integrating SCA procedure and adding HCI API").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Introducing common pdu struct declarations for conn param req/rsp and
data length req/rsp to utilize identicality for optimal pdu handling
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
If a central or peripheral is not configured for ISO connected streams,
reject a remote LL_CIS_TERMINATE_IND procedure, responding with an
unsupported feature error (BT_HCI_ERR_UNSUPP_FEATURE).
This fixes EBQ test /LL/PAC/CEN/BV-01-C.
Signed-off-by: Morten Priess <mtpr@oticon.com>
For making handle available in vendor sink creation, add ISO handle
to function prototype.
Expose datapath allocation via new ull_iso_datapath_alloc function.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Function ll_setup_iso_path has a construction which causes proprietary
compiler to generate incorrect code. As a workaround, local data path
pointer variables are eliminated.
Signed-off-by: Morten Priess <mtpr@oticon.com>
For framed case, the internal RX SDU counter would increment regardless
of whether the first valid SDU was received or not. According to spec,
SDU counter synchronization is done from first valid SDU.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Make sure ll_iso_stream_connected_get returns NULL until CIS is
established. Always return DISALLOWED when trying to disconnect a CIS
which is not connected.
Signed-off-by: Morten Priess <mtpr@oticon.com>
When a CIS is terminated, the associated link pool must be de-
initialized to be ready for next creation of the corresponding
instance in memory.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Do not assert on invalid PDU in CIS create procedure. Instead terminate
with reason BT_HCI_ERR_LMP_PDU_NOT_ALLOWED
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Corrected an omission in the ISO-AL that required an SDU interval to
be added to the reconstructed RX time stamps for each SDU after the
first.
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
- New calculation of Max_PDU for framed case according to BT Core 5.4
- Fix CIS_Offset calculation for multiple CIS usecase
- Fix resume ticker setup for central
Signed-off-by: Morten Priess <mtpr@oticon.com>
An LE controller shall no longer support HCI_Read_Local_Supported_Codecs
[v1] according to BT Core 5.3.
Command bit and support code removed.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Adding a bit-mask to the 'extra' data structure allowing passing info
re. active CIS's to the ull_conn_iso_done handling. Per CIS storing
an expiration time counter, monitoring in done handling. Adding
establishment timeout monitor in CIS Create procedure, completing
and ntf'ing accordingly.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
If a CIS is in teardown state, the data in structure should not be
trusted, so skip passing data to ISOAL
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Instead of storing the calculated reload value (in conn intervals) in
the conn object, now store the timeout value, and perform calculation
when used. This allows using the timeout value across all CIS's without
having to re-calc and store on change of TO
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Missing decode of conn_event_count on CIS_IND
Peripheral Suggest update to conn_event_count in case of a delayed
CIS_IND, allowing CIS peripheral more time to setup
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Add mayfly locking around the access to the local pending procedure list
as it is accessed by both thread and mayfly.
Fixes#45427
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
When generating notification for Sleep clock accuracy, check for
success on rx_node allocation was left out. This is added.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
The `bluetooth/common/log.h` and `bluetooth/common/log.c` files have been
removed. Files that were using them have been updated to use
`zephyr/logging/log.h` instead.
Those replacement have been done consequently:
- `/BT_DBG/LOG_DBG/`
- `/BT_ERR/LOG_ERR/`
- `/BT_WARN/LOG_WRN/`
- `/BT_INFO/LOG_INF/`
- `/BT_HEXDUMP_DBG/LOG_HEXDUMP_DBG/`
- `/BT_DBG_OBJ_ID/LOG_DBG_OBJ_ID/`
Also, some files were relying on the `common/log.h` include to include
`zephyr/bluetooth/hci.h`, in those cases the include of `hci.h` has
been added.
For files that were including `common/log.h` but not using any logs,
the include has been removed and not replaced.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Implement HCI commands HCI_Read_Connection_Accept_Timeout and
HCI_Write_Connection_Accept_Timeout, and enable the feature in
supported commands.
Remove hardcoded use of default accept timeout in new LLCP code, and
use configurable value instead.
This makes EBQ test /HCI/CIN/BV-03-C pass.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Adjust skip value so that there is minimum of 6 events that can be
listened to before Sync_Timeout occurs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Ensure maximum size of common extended header format be
reserved when CONFIG_BT_CTLR_ADV_RESERVE_MAX=n is used so
that changes to ACAD, like channel map update does not need
frequent update to periodic advertising auxiliary channel
PDU time reservations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When calculating the offsets between primary advertising
PDU, auxiliary PDU, Periodic Advertising PDU, and BIS PDU,
the values used as anchor points for starting the periodic
interval for auxiliary, periodic and BIG events, should be
ensured to have the minimum auxiliary frame spacing T_MAFS
between the PDUs. EVENT_OVERHEAD_START_US has to be reduced
as this value is used to offset the start of the radio
event on air.
Reverts commit b867f0e8a6 ("Bluetooth: Controller: Fix
T_MAFS between broadcasting roles").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The default number of buffers (contexts) for locally initiated
procedures was 4. Per default the host initiates 3 procedures
when opening a connection, allowing the application to initiate
only 1 additional procedure in parallel.
This commit increases the default to 6, if auto phy-update and
dle is enabled, increasing the robustness for an application.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
- Add CIS Create policy config choices
- Implemented CIS Central in ULL following proposed setup/commit flow
- Full support for HCI_LE_Set_CIG_Parameters_Test
- Extend ull_conn_iso_start and ull_conn_iso_ticker_cb to handle
central role
- Partial support for HCI_LE_Set_CIG_Parameters. TODOs:
* Drop suggested retransmissions if Max_Transmission_Latency is
exceeded
* Calculate ISO interval based on policy
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix issues with referencing invalid netbuf data and add missing
parameter. Removed returning of handle in setup functions, as handles
are not available until commit.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Move ull_peripheral_iso_start ull_peripheral_iso_ticker_cb to
ull_conn_iso, to share code between CIS peripheral and central.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Local procedure for CIS central establishment. Calls yet unimplemented
functions in ull_central. Changes are guarded by
CONFIG_BT_CTLR_CENTRAL_ISO.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Replace the BT_CTLR_ADVANCED_SCHEDULING_CENTRAL_CONN_SPACING
Kconfig with BT_CTLR_CENTRAL_SPACING to configure the
the spacing from the beginning of a central connection event
to beginning of the next central connection when supporting
multiple simulataneous central connections.
If the BT_CTLR_CENTRAL_SPACING in microseconds is smaller
then the required time reservation for a connection event,
for given maximum data length and PHY in use, then the
calculated time reservation will be used as the spacing
between consecution central connection events.
The change fixes an issue wherein use of old Kconfig with
higher values causes new central connections to be placed
in between already connected central role if there was
free time space available to fit the new connections time
reservation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Explicitly set all bits of used radio registers when
configuring radio events, removing the dependency on having
the power-on reset value and removing the need to ensuring
power-on reset values being set in the radio peripheral.
This will ensure the Controller has radio register value
correctly configured irrespective of changes across SoCs'
radio register power-on reset values.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix advertising set's is_enabled flag to be reset when
connection complete is dequeued for connectable advertising
started using legacy advertising enable HCI commands. And
reset the is_enabled flag when advertising set terminated
is dequeued for connectable advertising enabled using
Extended Advertising HCI commands.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ticks difference calculation to determine delayed
prepare callback. Without the use of masking by
ticker_ticks_diff_get, the diff value can be higher than
the supported 24-bit value. i.e. ticker_ticks_now_get()
rolls over in 24-bit value, whereas ticks_at_event is
free running value of 32-bits.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add long control PDU size support, also the implementation
now allocates control PDU size restricted to the supported
biggest control PDU that is enabled in the application
build. Features that are covered based on the increasing
control PDU sizes are ClearText connections, Encrypted
Connections, Connection Parameter Request support and
Create CIS control Procedure (Connected Central ISO)
support.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
-- Handle time calculations across the point at which the controller's
time information from the controller's clock will wrap (in the
microsecond range)
-- Use wrapped time in all ISO-AL time calculations
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Adding support for allowing user extension code to support deferring
anchor point moves. Refactored LLCP only.
Note: This is NOT supported by LEGACY LLCP impl.
KConfig'd by BT_CTLR_USER_CPR_ANCHOR_POINT_MOVE
Modified ll_conn_update API, to accommodate passing offsets
Modified CPR/CU context data structure
Modified CPR/CU procedure to handle anchor point move wait state
Fixed up unit tests, adding anchor point move cases to CPR/CU test
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Using a macro instead of repeated identical code for validation
Use macro for pdu length field encoding
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Adding controller support for updating SCA in ACL and ISO peripherals
Adding HCI API support for le_request_peer_sca and complete event.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Check LE event mask state as well as host controlled feature mask state
and reject CIS request accordingly.
Release pre-allocated ISO resources on rejection of request
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Program CIG ticker with window widening drift. Introduce vendor specific
conversion macros allowing sub-microsecond resolution in the
accumulation of window widening drift per interval.
Calculation of window_widening_max_us is done for NSE<3, and must be
adjusted in the LLL before use, if the first CIS in the CIG has a
NSE>=3. In that case window_widening_max_us shall be limited to one sub
interval.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Functions related to string manipulation that were defined in
`common/log.h` has been moved to the `common/bt_str.h` file and their
implementation in `common/bt_str.c`.
Files that were using those functions has been updated consequently.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Fix ticker slot reserved check to handle deferred execution
of ticker worker where ticks_elapsed is greater than
ticks_slot_previous. In which case, each ticker expiring be
checked for overlap with previous slot reservation.
This fixes:
ASSERTION FAIL [0] @ WEST_TOPDIR/zephyr/subsys/bluetooth/
controller/ll_sw/nordic/lll/lll.c:476
lll_preempt_calc: Actual EVENT_OVERHEAD_START_US = 3906
Flash erase operation exposed the assertion, CPU being
halted deferred the ticker_worker collision resolution and
ticker expiry was not individually checked for overlap with
previous expired ticker reservation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing first connection event due to first connection
event ticks_slot of central and peripheral overlapping with
the initiator window ticks_slot and advertising ticks_slot,
respectively.
Use ticker_stop_abs interface so that when the ticker is
stopped the ticks_slot_previous is truncated to the actual
ticks used as requested by the supplied absolute ticks.
Relates to commit 8a294a62d4 ("Bluetooth: controller:
legacy: Fix missing first conn event").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ticker instance ticks_current initialization to be
acquired from the RTC counter value. The RTC counter may
have run in previous use of ticker before bt_disable hence
keep the instance ticks_current equal to RTC counter value
when ticker_init() is called again.
Relates to commit 4349a475a8 ("Bluetooth: Controller: Add
deinit() infrastructure").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In order to avoid using multiple sources of truth for the platfom's
endianness, convert the in-tree code to use the (BIG|LITTLE)_ENDIAN
Kconfig variables exclusively, instead of the compiler's
__BYTE_ORDER__.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
According to specification, when executing a remote procedure the
rx parameters used need to be updated when the REQ from the peer
is received. Currently this is done only when an ACK is
received on the RSP PDU send out.
This commit updates the RX parameters upon receipt of the REQ PDU
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Macro that was defined in the `common/log.h` has been moved to the newly
created `common/assert.h` file.
Files that were using those macro has been updated consequently. Also, the
include of `common/log.h` has been removed of files that were actually not
using any logging methods.
Some `#include "common/log.h"` have been removed. Those were required
before when including `hal/debug.h`. With this change, `hal/debug.h` no
longer has this requirement, because the replacement, `common/assert.h`
includes what it uses.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Change automated searching for files using "IRQ_CONNECT()" API not
including <zephyr/irq.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Adds proper support for having more than one PDU pool for the advertising
PDUs (to save memory)
- Introduces lll_adv_aux_data_init, lll_adv_aux_scan_rsp_alloc and
lll_adv_sync_data_init to indicate if the PDU is a primary/legacy PDU
or secondary/auxillary PDU
- Scan response PDUs are initialized later, since the correct pool to draw
from depends on whether the advertising is extended or legacy
Signed-off-by: Troels Nilsson <trnn@demant.com>
There is access to the procedure context after a potential release
of the context, which (in theory) can lead to incorrect behaviour
There is no good way of testing this with a unittest without adding
specal debug code to the ull_llcp_local module
After code-inspection no other location has been found with
potential access after context release
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
According to Core 5.3 Vol 4, Part E, section 7.8.82 slot_durations,
switch_pattern_len and ant_ids are used only for AoA and do not affect
reception of AoD CTE.
To improve interoperability checking of correctness of these parameters
is not required. It will not affect lower link layer in case the AoA
CTE reception feature is not enabled in Kconfig.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The sys* ops like sys_clear_bit are indirectly included via arch CPU
header. Other stuff like find_msb_set end up included via this header as
well.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Account for the added random delay when updating remaining duration
- Re-worked JIT re-scheduling update a bit to keep the random delay
information and remaining duration correct
Signed-off-by: Troels Nilsson <trnn@demant.com>
- Remaining duration is now in us instead of ticks to avoid
overflow when ticks have higher resolution
- First advertising event should not reduce remain duration
Signed-off-by: Troels Nilsson <trnn@demant.com>
Add EVENT_OVERHEAD_START_US to ticks_anchor when enabling
advertising, so the first advertising event is not late due
to calculations for aux packets etc.
Signed-off-by: Troels Nilsson <trnn@demant.com>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Tune the EVENT_OVERHEAD_START_US for typical usecases on
nRF52833 SoC using the central_gatt_write and
peripheral_gatt_write samples.
Manually run the samples for over 30 mins without any
assertions and use the actual profiled value that would
otherwise be printed on assertion.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When ticks_to_expire is in the past, i.e. ticks_to_expire is
0, perform an explicit trigger of ticker worker instead of
setting up the compare which delays the trigger by the
minimum ticks offset margin. The changes reduce latencies
of the O(n) ticker_resolve_collision by upto the minimum
ticks offset margin (3 for nRF SoCs) for each resolution.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When an event's prepare is delayed due to ULL scheduling or
ISR latencies, check and have a verbose assertion that logs
the actual EVENT_OVERHEAD_START_US required.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Conditional compile ticker interfaces like ticker_update
which are not required when individual state or role samples
are build.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the BIG event counter calculation from stored payload
counter. Event latency should not be multiplied by burst
count.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing includes and rearrange header includes to be able
to build a full feature set Controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Set the correct number of Ctrl Tx buffers used for the new
implementation, so that the ACK-fifo gets the correct size
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Conditionally compile the legacy control procedure defined
control Tx buffers that is not required in the new control
procedure implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adds support for handling fragmented advertising data over HCI when
CONFIG_BT_CTLR_ADV_AUX_PDU_LINK is not enabled
- Added support for appending advertising data to ull_adv_aux_hdr_set_clear
and ull_adv_aux_pdu_set_clear via ULL_ADV_PDU_HDR_FIELD_AD_DATA_APPEND
- Updated ll_adv_aux_ad_data_set and ll_adv_aux_sr_data_set to
handle fragmentation ops without CONFIG_BT_CTLR_ADV_AUX_PDU_LINK
Signed-off-by: Troels Nilsson <trnn@demant.com>
Remove redundant assertion check, and minor indentation fix
to correct the alignment of function call.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable ticker ticks slow window extensions implementation
when broadcaster role is enabled. This feature moves the
primary channel advertising event within the specified
window when overlapping with other roles.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implemented:
-- Combining segments from multiple SDUs in a single PDU for TX
-- Release of PDU based on remaining capacity below threshold
-- Release of any PDUs in production on receiving a timeout for the
upcoming event
-- Release of PDUs in production if source if destroyed
-- Synchronization flag to exclude multiple contexts in ISO-AL
-- New Kconfig BT_CTLR_ISO_TX_SEG_PLAYLOAD_MIN to allow definition of
minimum TX segment size
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Implements:
-- SDU fragments can be buffered in the ISO-AL so that the correct size
of the SDU can be computed such that it can be released for inclusion
in the first fragment's header
-- Changed SDU emit interface to allow the same structure to be used to
buffer as well as release fragments
-- New configuration BT_CTLR_ISO_RX_SDU_BUFFERS to specify the number of
SDU buffers for each sink
(Buffering disabled when BT_CTLR_ISO_RX_SDU_BUFFERS=0)
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Implemented:
-- Storing information required to service HCI_LE_Read_ISO_TX_Sync
request
-- Implemented interface to retrieve information
-- Cleared ISO-AL source and sink state on deallocation
-- Renamed cig_ref_point to grp_ref_point as it serves a common purpose
in both CIS and BIS
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Improvement for IAL/CIS/FRA/PER/BI-01-C & IAL/CIS/FRA/PER/BI-02-C
-- Test appears to fail as the transmitted PDU is packed with less data
than is indicated in the segment headers.
-- Guards were included to verify that sufficient data exists in the PDU
before extracting the segment.
General
-- Updated timestamps in error SDUs to better approximate the expected
timestamps if time information is missing.
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
In case a connection update complete event reports an error, the
parameters reported should be the ones active on the connection and not
the ones requested
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
LE Write Suggested Default Data Length and LE Set Data Length commands
are suggestions from host and should be validated only as per HCI
specification regarding internal setting of LLCP.
LLCP is allowed to use other values if needed.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
The memory used for Tx buffers and procedure context must
be aligned on a word boundary, otherwise it is possible
to get unaligned memory access
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Fix radio_tmr_start_us to be soft realtime, if the requested
start in microseconds is in the past, setup the next
earliest expiry. This is to prevent radio not being started
and not let the LLL hanging. When setup to receive auxiliary
PDU in LLL scheduling, is_aux_sched is set and if radio does
not start and the window is requested to be pre-empted, then
it is blocked from being preempted due to the is_aux_sched
flag remaining to be set. This stalls the scanning
infinitely until explicit scan disable.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing is_aux_sched flag being reset before resuming to
scan for new advertising PDU in the same scan window after
having received an earlier primary channel PDU and auxiliary
channel PDU using LLL scheduling.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix receiving spurious overlapping ADV_IND and SCAN_IND PDU
when LLL state expects to receive SCAN_RSP PDU. Explicitly
check that these PDUs are not processed when in active
scanning and waiting for SCAN_RSP PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
If scan is being disabled, rx could already be enqueued
before coming to ull_scan_aux_rx_flush. Check if node rx is
not the last in the list of received PDUs then add it to the
list, else do not add it to the list to avoid duplicate
report generation, release and probable infinite loop
processing of the list. It is possible that node rx has not
be already added in case of last PDU in the chain, under
this case when scan is being stopped add it to the list
before auxiliary context is flushed.
Add the node rx to aux context list of node rx if not
already added when coming to ull_scan_aux_rx_flush. This is
handling a race condition wherein the last PDU in chain is
received and at the same time scan is being disabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix scan aux context leak on Periodic Sync Terminate. On
Periodic Sync Terminate the `is_stop` flag is set to prevent
the ULL from assigning an aux context to the sync context,
but the acquired aux context was neither assigned to sync
context nor was being released back to the aux context pool.
Fixed by releasing the aux context if not assigned to the
sync context when `is_stop` flag is set.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
With introduction of refactored LLCP was also introduced an error
re. calculation of initial slot reservation in connection setups.
Due to this error a bigger slot was reserved, leading to failure due to
connection overlaps in multiple.sh test.
Also the removal of this 'overhead' in slot reservations calls for
bigger time-allowance for l2pcap_stress test.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Fix implementation to not reset the ticks_slot_id_previous
when ticker yields its reserved slot, only reset if ticker
was stopped.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ticker worker from checking the ticks_slot_id_previous,
only ticks_slot_previous be checked as previous slot id
would be assigned to TICKER_NULL if the ticker was stopped.
The ticks_slot_previous value should be used to check that
a slot is reserved even if the ticker has been stopped.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add in Kconfig, select DEPRECATED, to warn at build time
that the LLCP legacy implementation is deprecated and the
refactored LLCP enabled by BT_LL_SW_LLCP Kconfig option be
used instead (which is the default now).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix BIS max PDU size used in calc of sub_interval, use the
minimum of supported maximum BIS PDU size and the requested
SDU size. This will avoid wasted air time between subevents
when SDU size is less than maximum supported PDU size, where
only 150 us tIFS is mandatory between subevents.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When calculating the offsets between primary advertising
PDU, auxiliary PDU, Periodic Advertising PDU, and BIS PDU,
the values used as anchor points for starting the periodic
interval for auxiliary, periodic and BIG events, should be
ensured to have the minimum auxiliary frame spacing T_MAFS
between the PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use a local variable to assert check on auxiliary context's
release.
Add missing volatile qualifier to the parent field of the
auxiliary scan context.
Under race condition a released aux context can be allocated
for reception of chain PDU of a periodic sync role, hence
fix the assertion check to consider that the released
context can be allocated to other roles.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Increase the BIS PDU access address receive timeout, use the
+/- 2 us jitter for each subevent.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix inifinite loop in ll_rx_get() when both ISO Broadcast
and ISO Receive features are enabled in a build. Missing
conditional compile prevented the ack_last index that
maintains a relation between number of packets complete and
the received data packets was unassigned.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
According to Bluetooth 5.3 Vol 4, Part E section 7.7.65.21 the
Controller should send an IQ report with Packet_Status set to 0xFF
and Sample_Count to 0x0, to inform Host that it is not able to
store IQ samples for all received Constant Tone Extensions and has
failed to sample at least once.
This commit adds handling of such situation for direction finding
in connectionless mode in lower link layer. It includes:
- lack of node_rx_iq_report to store IQ samples,
- lack of free node_rx to report received advertising data (generates
an advertising data report with indication "incomplete, no more to
come" and cancels reception of chained PDUs,
- cancellation of chained PDUs reception due to other scheduling
reasons.
In all of these situations CTE reception must be enabled and number of
received CTEs is smaller than requested by Host.
If there is not sufficient number of node_rx_iq_report nodes and
report was generated, the CTE will not be samples in a given
periodic advertising synchronization event. The CTE will be
sampled again in next event if there are node_rx_iq_report available.
End user applications may check periodic advertising sync event
counter when use of the reports to be sure about sync event
the received report is connected with.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix incorrect use of stream handle instead of connection
handle to enqueue Tx ISO Data, and use stream index to get
stream instance.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enforce next_is_older only when current has equal force as
with the next ticker.
Added Kconfig to disable priority feature in ticker that is
currently not used by Zephyr Bluetooth Low Energy
Controller.
The priority feature if enabled then a custom ULL is needed
by vendors to avoid repeated skipping of overlapping events
as next_has_priority check uses lazy value that would be
always lazy_next > lazy_current as currently skipped event
becomes the next event with lazy value incremented by 1.
Regression in commit 3a9173afe1 ("bluetooth: controller:
Revised ticker for improved conflict resolution") due to
Zephyr Controller does not implement any vendor specific
priority logic.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Reduce the number of times cntr_cnt_get() is called in
ticker implementation as call to this function halts the
CPU inorder to access the RTC count in the 32KHz clock
domain.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Extended Scanning assertion check when using Ticker
Low Latency Implementation where the failure to schedule
a ticker timeout is returned inline compared to deferred
failure in the operation callback.
Auxiliary PDU is received using a single-shot ticker
timeout with ticks_slot reservation. This single-shot
ticker is allowed to fail if it is overlapping another
event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The LE Accept/Reject CIS Request commands shall return Unknown
Connection Identifier if the handle is not a CIS handle or does not
exist. If the CIS already has been established, the commands shall
return Command Disallowed.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Fix incorrect data type int32_t local variable used for lazy
value which is uint16_t type.
Other minor code refactor done.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing conditional compile of structure members not
required with BT_TICKER_SLOT_AGNOSTIC is enabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add 'U' to a value when assigning it to an unsigned
variable.
MISRA-C rule 7.2
Relates to commit b97db52de7 ("misra-c: Add 'U' to
unsigned variable assignments in subsys/").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect use of stream index (application selected list
of BIS stream) instead of BIS index when checking for
whether the received PDU is to be stored and to be
dispatched as ISO data to ULL.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing Broadcast ISO Synchronized Receiver terminate
reason initialization that caused Sync Lost immediately on
a new Sync Establishment due to previous Sync terminate
reason not being reset.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing implementation to correctly to use data channel
index for subevents when previous subevent of previous BIS
stream where skipped.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ISO broadcast implementation to flush stale ISO data for
all BIS streams and like wise generate acknowledgements for
all BIS streams that had its ISO data transmitted at its
reference anchor points.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Restrict the calculated possible Pre-Transmission subevents
count to a maximum of 1 so that the full ISO interval is
not fully occupied by the BIG event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix a leak in generation of Number of Completed Packets when
more than one handle has acknowledgements to be processed.
The loop exited for the current handle by dequeueing the
node tx element of the next handle leading to lost Number of
Completed Packets.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When radio event prepare is cancelled due to preemption by
overlapping radio events, the extra done event processing
was missing and hence the use of accumulated prepares'
skip/latency count.
This caused the check for supervision timeout and sync
lost not be aware of the elapsed events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add 'U' to a value when assigning it to an unsigned
variable.
MISRA-C rule 7.2
Relates to commit b97db52de7 ("misra-c: Add 'U' to
unsigned variable assignments in subsys/").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add the missing ticker resolution margin when calculating
the ticks_anchor to be used to get non-overlapping BIG
events.
Relates to commit fab4511164 ("Bluetooth: Controller: Fix
overlapping advertising events").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
For the encryption procedure exists a flag used to indicate that the
procedure expects all PDUs to be delivered to the procedure STM.
This flag was not cleared during creation of new procedure. This could
lead to unexpected PDUs being passed to local procedure STM
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Fix compile error when BT_CTLR_JIT_SCHEDULING is enabled but
BT_CTLR_ADV_EXT is disabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When periodic advertising with chaining is re-enabled after
changing interval or just re-enabled then the chain PDUs
where not duplicated causing the LLL to assert detecting the
presence of aux pointer but no linked chain PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor to revert back the terminate check condition to
check the connection role first.
Reverts legacy code changed in
commit 8b1d50b981 ("Bluetooth: controller: llcp: fix issue
re. missing ack of terminate ind").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Do not use lazy value to prioritize ticker with ticks slot
window that yield to other tickers. Primary channel PDUs
use ticks slow window to nudge themself after an
overlapping ticker within the ticks slot window, but such
ticker may be skipped to next interval. At the next
interval if they again overlap with other tickers then
lazy value shall not be used to prioritize but rather
continue to yield again. This is required to avoid BIG
events from being skipped.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix BIG Create implementation from silently failing on
values of RTN and SDU_interval that lead to BIG events that
cannot be acheived when using sequential or interleaved
subevents by the Controller Implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a Kconfig for Advertising Data Chaining in Extended and
Periodic Advertising, permitting AD data lengths of upto
1650 bytes. The implementation is experimental and needs
further testing.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix BT_CTLR_ADV_DATA_LEN_MAX and other Kconfig dependencies,
and clean up the use of PDU_AC_LL_SIZE_MAX which is used to
allocate scratch packet to be atleast able to accommodate
the minimum 31 bytes AD data such that it is sufficient to
transmit and/or receive scan response PDUs when either
broadcaster or observer alone is supported.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Allow requesting any TX power in SDC via kconfig. This enables easily
setting higher TX values when using a FEM.
Signed-off-by: Timothy Keys <timothy.keys@nordicsemi.no>
- Fix ISO TX data pool corruption due to multiple calls to
tx_cmplt_get, without removing the nodes
- Added missing release of TX node link in case of ISOAL error
Signed-off-by: Morten Priess <mtpr@oticon.com>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ISO Tx PDU memory pool corruption due to duplicate ISO
Tx PDU buffers repeatedly released into the memory pool.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the removal of BIG context association with the
Periodic Advertising context to when the BIG streams are
release and BIG terminate message is generated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to use the BIS array parameter and
selectively synchronize to subset of multiple Broadcast
Isochronous Streams in a Broadcast Isochronous Group.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix calculation of BIS subevents that was missing num_bis
when calculating the PDU latency.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect conditional compile to disable Controller
advanced scheduling feature which is required for Broadcast
ISO implementation.
Regression in commit 6fe1299c33 ("Bluetooth: controller:
llcp: fix CI tests for new LLCP").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In a Host plus Controller combined build for ISO feature
restrict the maximum ISO Tx PDU size to minimum of 251 bytes
and Host ISO Tx MTU. This will allow controller to use
reduced Tx time (subevent interval).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fix prepare pipeline preempt timeout stop from stopping a
a prevously started timeout for the next in pipeline event.
The preempt timeout started prior for the current event that
has its prepare that is invoked is to be not explicitly
stopped. If there is a next prepare event in pipeline, then
the prior preempt timeout if started will be stopped before
starting the new preempt timeout. Refer to implementation in
preempt_ticker_start().
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation in Periodic Sync LLL abort to use near
fair scheduling to ensure overlapping multiple Periodic
Sync set each get to use the radio and not lead to Sync
Loss.
The implementation is used when overlap in radio event
happens in unreserved time space of the event. An abort
count is maintain in each Periodic Sync instance and is
used to decide whether the current event or the next
event is to be aborted when they overlap.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
