Benjamin Cabé 37144c1ffa drivers: sensor: icm42605: fix turn_off_sensor logic ... While it would likely not directly cause issues with the current implementation, the logic of turning off the sensor should be to actually reset the flags, not to toggle them. Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>		2025-06-18 07:39:15 +02:00
..
a01nyub
adi	drivers: sensor: adi: adxl372: Remove logically dead code	2025-06-17 07:22:34 +02:00
amd_sb_tsi
amg88xx
ams	drivers: sensor: tsl2540: fix channel validation logic in attr_set	2025-06-17 07:24:41 +02:00
aosong	driver: sensor: aosong,dht: fix sensor protocol broken since change #83192	2025-05-31 03:35:47 +02:00
apds9253
apds9306	drivers: sensor: Remove broken reset from apds9306 driver	2025-05-31 06:54:52 -04:00
apds9960
asahi_kasei
bosch	drivers: sensor: bma4xx_emul: add missing break statement	2025-06-09 14:51:47 -07:00
broadcom	sensor: afbr_s50: Add DTS configuration bindings	2025-05-28 21:29:13 +02:00
current_amp	drivers: current_sense_amplifier: add zero-current-voltage binding	2025-05-28 17:48:47 +02:00
ene_tach_kb1200
ens160
espressif
everlight
explorir_m
f75303
fcx_mldx5
grow_r502a
hc_sr04
honeywell
hp206c
infineon	drivers: sensor: infineon: fix typo in calibration gain assertion	2025-06-07 15:39:15 +01:00
ist8310
ite
jedec
liteon
lm35
lm75
lm77
maxim
meas
melexis
memsic	drivers: sensor: mmc56x3: add error handling in mmc56x3_chip_init	2025-06-09 14:45:27 -07:00
mhz19b
microchip
nct75
nordic
ntc_thermistor	drivers: sensor: ntc-thermistor-generic: add missing mutex	2025-06-05 12:33:39 +02:00
nuvoton
nxp
pixart	drivers: sensor: paa3905: fix condition in SQE acquisition check	2025-06-09 14:43:42 -07:00
pms7003
pni
pzem004t	modbus: serial: Add non-compliant mode with custom stop-bit settings	2025-06-10 12:53:23 -04:00
qdec_sam
realtek
renesas	drivers: sensor: renesas: Fix unchecked return value in hs400x	2025-06-05 12:34:01 +02:00
rohm	drivers: sensor: Add support for BH1730 ambient light sensor	2025-06-02 20:22:42 +02:00
rpi_pico_temp
s11059
sbs_gauge
seeed
sensirion	sensor: sht4x: add device power management support	2025-06-09 16:45:30 -07:00
silabs
st	drivers/sensor/: lis2dux12: support FIFO modes	2025-06-17 07:23:23 +02:00
sx9500
tdk	drivers: sensor: icm42605: fix turn_off_sensor logic	2025-06-18 07:39:15 +02:00
th02
ti	driver: sensor: as6212: fix sampling frequency	2025-06-10 12:09:51 +02:00
tsic_xx6
veaa_x_3	drivers: sensor: veaa_x_3: fix broken config initialization	2025-06-09 15:00:26 -07:00
vishay
voltage_divider	drivers: voltage_divider: handle ADC PM	2025-06-11 08:18:39 +02:00
wsen	drivers: sensor: wsen_itds_2533020201601: fix unhandled returned values	2025-06-13 11:13:25 +02:00
xbr818
CMakeLists.txt	modules: afbr: Add basic functionality	2025-05-28 21:29:13 +02:00
default_rtio_sensor.c
Kconfig	modules: afbr: Add basic functionality	2025-05-28 21:29:13 +02:00
Kconfig.sensor_clock
Kconfig.trigger_template
sensor_clock_external.c
sensor_clock_sys.c
sensor_decoders_init.c
sensor_handlers.c	drivers: sensor: fix sensor_handlers checks	2025-06-09 14:44:36 -07:00
sensor_shell_stream.c
sensor_shell.c	drivers: sensor: adopt SHELL_HELP	2025-06-13 15:41:58 -07:00
sensor_shell.h
shell_battery.c