Adjust the sample to work with the priority boost. It illustrates zbus
being used inside an ISR instead of into the main function.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
This change follow the recent commit that update openamp rsc table logs.
Add the logs for both samples sample client & TTY responder,
as well as for both sides Linux & Zephyr.
Remove the serial connection to Zephyr because it is board specific.
Signed-off-by: Marc-Antoine Riou <marc-antoine.riou@iot.bzh>
Add logs in both of the openamp rsc table loops to stick with
what is shown in Zephyr documentation. Prefix each message with the loop
name and unify logs with those from rpmsg_client_sample module.
Signed-off-by: Marc-Antoine Riou <marc-antoine.riou@iot.bzh>
Sample openamp_rsc_table was sending too many characters to master.
It was displayed as unrecognised character when reading message on master.
Signed-off-by: Marc-Antoine Riou <marc-antoine.riou@iot.bzh>
The sample did not correctly select the WinUSB
driver for the WebUSB interface as required
on Windows when CDC ACM was included in the
build configuration (the case for e.g. nRF52840
Dongle).
Introduce correct function subset header in the
MS OS 2.0 descriptor.
Signed-off-by: Lars Knudsen <larsgk@gmail.com>
Add DT overlay to be able to support and test UDC DWC2 driver
(snps,dwc2) on nucleo_f413zh board. This disables STM32 shim
driver described and configured on the SoC and board level.
Obviously,it should work with other STM32F4 boards as well and we
could have a mechanism to apply it generically using snippets.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add README.rst file with description of sample which shows how to use
pytest and Twister together.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Use the common USBD sample initialization helper where new USB device
support has already been added.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
There is common code for the new USB device support in the samples to
instantiate USB device, descriptors, configuration and initialize USB
device. Add common code that can be used for the simple usecase with a
single USB device and single configuration.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The benchmark sample did not contemplate message subscribers. It adds
the msg subscribers and improves the organization of the project.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
The subsys/logging/logger example can be used to demonstrate how to
use SWO for logging. Add a configuration fragment that enables the
logger's SWO backend. The default SWO frequency in this example is set
to 2 MHz to ensure a well-defined output bit rate instead of the
highest possible.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Enable INPUT_SHELL and INPUT_KBD_MATRIX_STATE by default if the sample
is compiled with CONFIG_SHELL=y. This makes it easier to use the shell
commands in the sample by just enabling the shell and let any help
command turn on automatically.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Update the readme to better describe contents of the sample, which is now
used to showcase the various input device types that LVGL offers.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Adds a zephyr,lvgl-keypad-input compatible to the native_posix board
overlay and the required code to control an button matrix widget.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Add a name for the Kconfig choice symbol
indicating the Zbus subscriber buffer allocation
and adjust the name of the existing choices.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
Add the overlay for running the samples/subsys/nvs/ application
on the nucleo_g31rb. Define a 6kB storage_partition at the end
of the 128kB flash.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add support for the WeAct Studio STM32G431 Core board. Note that this
board does not support USB-C PD in its default configuration. See the
board documentation for the necessary hardware reconfiguration.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
For all remaining samples which now set their integration platform
as native_posix(_64) switch them to native_sim(_64)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable the remaining samples which run now in native_posix also
in native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch from native_posix to native_sim as default test platform
Add conf and DT overlays for native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the docs replace references to native_posix with native_sim
* Switch the default test platform to native_sim from native_posix
* Add a runtime check for this sample
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
BINDESC can be used with any POSIX arch based target,
not just native_posix.
Fix the kconfig filter and the sample yaml filter.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace references to native_posix with native_sim
Switch the default test platform to native_sim from native_posix
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace references to native_posix with native_sim
Switch the default test platform to native_sim from native_posix
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace references to native_posix with native_sim
Switch the default test platform to native_sim from native_posix
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Replace native_posix with native_sim as the
default integration platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Instead of always enabling fuse for native_posix,
let's give users instructions on how to enable it
while building.
In the documentation: replace the references to native_posix
with native_sim, improve the links, mention the flash
simulator, and provide a separate subsection for FUSE access.
Add a separate test for the sample with fuse access enabled
and be sure it is possible to run both this and the basic
one with native_sim (was filtered out before for native_posix)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Allow this sample in native_sim, and set it as default
integration platform instead of native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Allow this sample in native_sim, and set it as default
integration platform instead of native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix and native_sim are already excluded thru
the lack of required tags.
Let's remove the platform exclude instead of adding also
native_sim to it explicitly.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim.
In the sample, add overlays for native_sim, and add native_sim to filter
and as default integration platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim.
And switch the overlays and default test platform to native_sim
from native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim
Enable native_sim in the tests, and replace native_posix as integration
platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
There are more ipc_service backends that supports multiple endpoint.
This sample can be used for any of those backends, so this commits
makes the sample more generic. The default backend it still icmsg_me,
but now, the sample has files and instructions for icmsg_with_buf
backend.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
On SoC series s32ze, Zephyr application cannot run with MPU
disabled, skipping relevant samples/tests
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
Remove nocopy feature from icmsg_me backend.
The backend is not meant to be used to send big
data chunks thus no-copy feature is removed.
If one wants to use no-copy it is recommended
to use icmsg_me only for control messages while
allocator will shall be written seperately.
Signed-off-by: Emil Obalski <Emil.Obalski@nordicsemi.no>
This patch allow demonstrating fat_fs sample application on
stm32h747i-disco board with SD card.
Build fs_sample using following command
west build -p always -b stm32h747i_disco_m7 \
samples/subsys/fs/fs_sample
Signed-off-by: Murali Karicheri <murali.karicheri@sandc.com>
Reduce the heap and stack sizes needed for the shell loader sample app
so more devices may try it out.
Tried on a mimxrt1010_evk and noted the total ram usage was
approximately 44000 bytes. Prior to this change the mimxrt1010_evk was
unable to run the sample as the bss section overflowed the ram size.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
