Fix issues reported by string validation which was added to strings
used in zassert macros.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
This test only works for 64-bit values. On targets which use 32 bits for
double, skip this version. The float test will check the 32-bit math for
that.
This is the 'nicer' version of this fix which uses sizeof rather than
relying on __SIZEOF_DOUBLE__.
Signed-off-by: Keith Packard <keithp@keithp.com>
The spi_loopback_transceive() helper currently only prints a
message if a configuration is invalid, continuing the test
case as if it succeeded. This results in the test case using the
helper trying to validate the result from a spi transaction that
was skipped.
Fix this by explicitly skipping the test using the ztest
framework's ztest_test_skip() function, which skips the entire
test case.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
With e337b7b65d, the test started to
fail with stack overflows in the no_optimizations scenario, so give
the ztest thread a little more space.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
As TinyCrypt gets deprecated, we need to remove all bsim tests that use
it. This commit switches all Bluetooth mesh bsim tests to PSA as a
default crypto backend.
This includes:
- removing `CONFIG_BT_MESH_USES_TINYCRYPT` as PSA is default crypto
backend for mesh. `CONFIG_BT_MESH_USES_MBEDTLS_PSA` is not required to
be enabled;
- merging `overlay_psa.conf` into `prj.conf` as this configuration
becomes default for all mesh bsim tests;
- merging `overlay_ss.conf` into `overlay_pst.conf` as secure storage is
required for running persistent storage bsim tests with PSA;
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This is a preparation commit for switching all bsim tests to PSA as
TinyCrypt will be removed soon.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Allow ESP32 devices to test the scenario where
when alarm should not be triggered after being cancelled.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
As part of counter API updates, RTC timer will be removed from
counter API driver and can be removed from the test list.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Enable support of SECURE LCS stage. In this stage, the protection
state is set to “secure”. A secured device will boot only when the
authentication of its flash boot and application code succeeds
Signed-off-by: Sreeram Tatapudi <sreeram.praveen@infineon.com>
These two tests are validating that deprecated APIs still work
correctly. Which means they will definitely generate compile warnings.
To disable -Werror while letting it be enabled for other tests, create a
new Kconfig variable, DEPRECATION_TEST and make
COMPILER_WARNINGS_AS_ERRORS depend on that option being unselected. Add
this option to the two tests so that the resulting configuration
disables -Werror.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test only works for 64-bit values. On targets which use 32 bits for
double, skip this version. The float test will check the 32-bit math for
that.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Test case `test_set_bulk` and `test_get_set` test the LwM2m getter and
setter function by
- init a buffer with some value
- calling lwm2m_set_... with buffer as parameter
- calling lwm2_get_... by letting `get` write-back into the same
buffer(!)
- compare the buffer with the init value
That implementation can't recognize a no-operation getter function.
This change adds some C macro magic for both test cases where
an `out` buffer for setter and an `in` buffer for getter functions
exists. The buffers are checked before use for inequality to avoid
any unexpected pass.
Signed-off-by: Stefan Schwendeler <Stefan.Schwendeler@husqvarnagroup.com>
Generator was enabled some time ago to use sys_rand32_get() however this
function is no longer in use.
Signed-off-by: Bartlomiej Buczek <bartlomiej.buczek@nordicsemi.no>
The new Nordic platforms use GRTC instead of RTC
as the system timer.
Also the nrf54h20 CPUPPR target does not have enough memory
to execute the `timer_behavior` test.
Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
Add an spi overlay for the audio build_all tests.
Add the pcm1681 to both i2c and spi overlays.
Signed-off-by: Jaro Van Landschoot <jaro.vanlandschoot@basalte.be>
Add a timespec util testsuite. This should have reasonably high enough
coverage to be useful.
I would have preferred to add this as an architecture-independent
unit test (for the unit_testing platform) under tests/unit/timeutil but
there is an inconsistency about the size of time_t on the unit_testing
and native_sim/native platforms. On every other platform supported by
Zephyr, time_t is 64-bits. However, on those platforms, time_t is only
32-bits.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Add support for the Sony IMX335 CSI sensor.
This sensor supports resolution of 2592x1944 in RGGB bayer format
either 10 or 12 bits and using 2 or 4 CSI lanes.
For the time being only 10 bits on 2 CSI lanes is supported via
this commit.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Port SYS_INIT to use soc_early_init_hook as SYS_INITs are legacy.
Due to moving dmm_init() from PRE_KERNEL_1 SYS_INIT to
soc_early_init_hook(), the DMM test is also updated to ensure that
its setup function runs before dmm_init().
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Signed-off-by: Jonathan Nilsen <jonathan.nilsen@nordicsemi.no>
After introducing compile time argument validation of strings
used in zassert macros multiple warnings appear. Fix all of
them.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Extract server configuration, client configuration and test shutdown
into separate functions so that they're reusable in other tests.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Picolibc changed things like _WANT_MINIMAL_IO_LONG_LONG to
__IO_MINIMAL_LONG_LONG in an attempt to regularize the exposed names and
eliminate names that weren't prefixed with even a single underscore.
Adapt to this change by looking for both old and new symbols.
Signed-off-by: Keith Packard <keithp@keithp.com>
According to wba55 refman RM0493, gpdma1 request for
spi1_rx_dma and spi1_tx_dma is 1 and 2.
solve failed test on drivers.spi.stm32_spi_dma.loopback
scenario.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
According to RFC793 chapter3.5 with the 'Reset Processing' part,
"In the SYN-SENT state (a RST received in response to an initial
SYN), the RST is acceptable if the ACK field acknowledges the SYN."
So, in the net_tcp_reply_rst() we should use 'ack++' if no ACK
flag but have SYN flag.
And, all the RST packet should use net_tcp_reply_rst() instead of
tcp_out().
Signed-off-by: Shrek Wang <inet_eman@outlook.com>
JWT test fails on max32657evkit/max32657/ns board, due to
it requries hardware TRNG on TF-M side which not activated
yet until it's issue been fixed it is excluded from automated
test to workflow been succeeded
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Due to limited value of clock divider, fast SPI instance
can work only at higher bitrates.
Add check for error message when fast instance is
configured to work at low/unsupported bitrate.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
