The net_capture_send() is only to be called from capture
implementation itself, so the API does not need to be public
thus hide it from generated documentation.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
ST7735S requires the COLMOD command be repeated as part of writing
pixels, otherwise it goes back to some kind of default which is likely
wrong.
ST7735S works correctly after this plus the previous two commits; tested
on STM32L462 + KD0096FM.
Signed-off-by: David Lamparter <equinox@diac24.net>
Use a continuous transaction with CS kept low for the entire batch of
row address, column address and actual pixel data write. This is
required by ST7735S and shouldn't hurt elsewhere.
Signed-off-by: David Lamparter <equinox@diac24.net>
When logging was disabled there was still a code size increase due
to log module structure being kept in the memory even though it was
unused. When CONFIG_LOG=n there should be nothing in the memory
footprint related to the logging.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Split FW into two images, one for central one for peripheral.
The SoftDevice controller's connection contexts are not role-agnostic:
some are reserved for the peripheral roles some for the central roles.
Splitting the test into two images is anyway "The right thing (TM)",
it's just that we sometimes take the shortcut of using a single image to
go faster.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Stores persistent on-demand private GATT proxy state in separate
settings entry. This is implemented to avoid issues related to
backwards compatibility between device firmware updates.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Stores persistent private beacon state in separate settings entry.
This is implemented to avoid issues related to backwards compatibility
between device firmware updates.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
ITCM relocation tests depends on MINIMAL_LIBC and when using Zephyr SDK
the default is PICOLIBC for mr_canhubk3 board, so explicitly select it.
Also the NXP S32 platforms don't have NXP MPU, so remove it.
For frdm_k64f the ITCM relocation test is not executed, so remove the
unnecesary filter CONFIG_MINIMAL_LIBC.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Makes the long workqueue init priority configurable and sets
the default to 50, this is to allow for relocating bluetooth
libraries to other parts of memory e.g. external flash, and
allows for those flash drivers to be initialised prior to
calling functions residing in them.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Use the new code-sample directive and roles to document the zbus samples
so that they show up as "Related samples" when browsing zbus API.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This commit delegates the modem_pipe_notify_closed() call
resulting from the UART async API UART_RX_DISABLED event
to the workqueue. This is neccesary as the async UART
callback may be called from ISR context.
modem_pipe_notify_closed() must be called from outside of
the ISR context as it takes a mutex.
The commit also adds a missing break to the async UART
callback, and adds a missing dependency to the Kconfig
for the UART backends, RING_BUFFER=y
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
This commit adds a callback to the button to reset the counter when the
button is pressed. The button is automatically created when lvgl
pointer or kscan support is enabled. The same reset functionality was
already available for possible gpio button.
Please make sure to define a zephyr input device in device
tree (e.g. "zephyr,lvgl-pointer-input").
Signed-off-by: Martin Kiepfer <m.kiepfer@teleschirm.org>
When doing a TX-only SPI operation, the RX not empty flag will never get
set, thus this will just hang forever.
Found/tested on STM32L462 trying to drive some WS2812 RGB LEDs.
Signed-off-by: David Lamparter <equinox@diac24.net>
The variables are usually placed into an output region located in FLASH
memory when linking, but the variables are not marked `const`, so the
section ends up with `W` writeable section flag:
```bash
❯ arm-zephyr-eabi-readelf --section-headers build/zephyr/zephyr.elf | \
grep -E '(Section Headers:)|( \[Nr\])|(zephyr_dbg_info)'
Section Headers:
[Nr] Name Type Addr Off Size ES Flg Lk Inf Al
[10] zephyr_dbg_info PROGBITS 60012298 01238c 000040 00 WA 0 0 4
```
Set them as const to set the output section to read-only:
```bash
❯ arm-zephyr-eabi-readelf --section-headers build/zephyr/zephyr.elf | \
grep -E '(Section Headers:)|( \[Nr\])|(zephyr_dbg_info)'
Section Headers:
[Nr] Name Type Addr Off Size ES Flg Lk Inf Al
[10] zephyr_dbg_info PROGBITS 60012298 01238c 000040 00 A 0 0 4
```
Signed-off-by: Noah Pendleton <noah.pendleton@gmail.com>
RD client tests work well on emulated (fast) environments
but tend to fail on real HW with real time sleeps.
This change refactors wait_for_service() to be a bit more
syncronous on background service, instead of relying hardcoded
sleeps.
Fixes#61824
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
cur_inst is the copy of ots_client instance to prevent duplicate
API call while client is in middle of read/write procedure.
But cur_inst can only be cleared while write_obj_tx_done or read rx_done.
If ACL is disconnected while read/write is on-going, there is no chance
for cur_inst being cleared.
This causes ots client will no longer perform select/read/write
procedure anymore. API will always return -EBUSY.
Let l2cap_disconnect check if cur_inst is NULL and NULL it
unconditionally as what it is designed.
Make bt_ots_client_unregister public API.
Signed-off-by: Pirun Lee <pirun.lee@nordicsemi.no>
Add shield definition for the TI TCAN4550EVM, an evaluation module for the
TI TCAN4x5x CAN controller series.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add driver for the TI TCAN4x5x series of CAN controllers. These CAN
controllers are based on the Bosch M_CAN IP and interfaced via an SPI bus.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add devicetree binding for the TI TCAN4x5x series of CAN controllers. These
CAN controllers are based on the Bosch M_CAN IP and interfaced via a SPI
bus.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Create dac_mcxu_lpdac.c file to implement mcux lpdac, add binding for
the mcux lpdac, update Kconfig.mcux and CMakeLists.txt file to support
mcux lpdac.
Signed-off-by: Albort Xue <yao.xue@nxp.com>
Reset the device on initializing if reset-node is available in dts.
`snps,desingware-i2c` does not define reset-node itself.
Add more of an element that inherits `reset-device.yaml` to
the `compatible` section to allow defining the reset-node
for using this feature.
For example.
```
compatible = "reset-device-inherit-node", "snps,designware-i2c";
```
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
This MCU has a classical CAN controller, which was previously not
enabled.
I2C2 is disabled by default because it uses the same pins as CAN and
there are no other free pins that can be used for CAN.
Signed-off-by: Martin Jäger <martin@libre.solar>
This adds endpoint by stream lookup function used to find the active
endpoints that use the stream object provided. The function is used
instead of dereferencing stream->ep that may be not valid if application
did not memset the stream object.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Once the application bt_bap_stream_ops.released callback is called make
sure the stream->ep pointer is valid so that application can still access
the endpoint details like e.g. endpoint direction.
Fixes: ASCS/SR/ACP/BV-{24,25,26,27,28,29,30,31}-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
When using the LC3 codec, the cid and vid fields of the
codec shall both be 0x00, as per the BAP and ASCS specs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Enable CONFIG_NET_L2_ETHERNET only when dummy L2 layer is not used.
Otherwise having the two of them enabled will cause failures in some
net tests that expect only dummy L2 layer to be enabled and configured.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
m5stack_core2 enables i2c by default for regulator usage which
conflicts with the test and is therefore excluded from the test.
Signed-off-by: Martin Kiepfer <mrmarteng@teleschirm.org>
This commit resolves an internal dependecy between GET_DIRECTION and
GET_CONFIG configuration. GET_CONFIG api is internally needed by
GET_DIRECTION api.
Signed-off-by: Martin Kiepfer <m.kiepfer@teleschirm.org>
This Pull-Request enables support for the M5Stack Core2 hardware.
The module features a LCD display, touchscreen, battery, USB-Port,
8MB RAM and 16MB Flash.
Basic features are working. Please refere to the board documentation
for details.
Signed-off-by: Martin Kiepfer <mrmarteng@teleschirm.org>
gpio: gpio_axp192: fix dependecy between GET_DIRECTION and GET_CONFIG
configuration
Latest unit gpio get_direction unit test failes, as get_direction api
internally requires get_config functionality. This commit fixes this
dependecy.
Signed-off-by: Martin Kiepfer <m.kiepfer@teleschirm.org>
