Add a new backend for Host Commands that uses UART. The backend bases
asynchronous UART API.
The UART backend is mainly used by FPMCU.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
When lfs mount fails and there is no formatting requested, the return
code must be translated to errno before being passed to the application
layer.
Additionally, only log a warning that the FS will be formatted, when the
system is not read-only.
Fixes#56378
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
Test was assuming that domain name is empty but on some
SoC CONFIG_LOG_DOMAIN_NAME is set by default and test
was failing. Add setting of domain name to test
configuration to ensure that same name is used for all
platforms.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Adds tests for the custom timestamp functionality. It also
includes a basic test for the default behaviour.
Signed-off-by: Hein Wessels <heinwessels93@gmail.com>
Test that the `zephyr,pm-device-runtime-auto` flag correctly enables
PM device runtime on the device instance.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Test that power domain operations don't result in unbalanced requests
to the power domain when the original device has PM disabled.
Needed to resolve issues raised in #53979.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The commit changes the fs_mount to not allow mounting same system,
with the same private data pointer, at two different mount paths.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The pending_sqe logic to track where in the ring queue the concurrent
executor had left off was slightly flawed. It didn't account for starting
all sqes in the queue and ending back up at the beginning.
Instead track the last SQE in the queue, from which the next one in the
queue will the one to start next.
If we happen to sweep the last known SQE in the queue, reset it to NULL
so the next time prepare is called we start at the beginning of the queue
again.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Transactional submissions treat a sequence of sqes as a single atomic
submission given to a single iodev and expect as a reply a single
completion.
This is useful for scatter gather like APIs that exist in Zephyr already
for I2C and SPI.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
The test suites have grown to cover different units really and having
them in one file was becoming a bit much to scroll around in.
Coincidentally found a accidental reuse of a define between the spsc and
mpsc tests.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Race was possible though very unlikely between the atomic cas
and queue push/pop operations. The outcome of the race had it shown up
would have been a submission not worked on due to the timer never being
started. A small critical section fixes this and clarifies where the single
conumer part of the mpsc queue comes in despite there being multiple
contexts which may enter that section.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Add supplementary header <zephyr/fff_extensions.h>. Add macro
to fff_extensions.h for simplifying definition of custom fake functions
needing call-unique information for producing desired output data.
When an array of custom fake context structures is defined and
the return field within the first structure instance is registered
with the standard SET_RETURN_SEQ() macro of FFF, the
RETURN_HANDLED_CONTEXT() macro provides the inverse logic to
recover the context structure for this called instance. The body of
the custom fake handler is provided to the RETURN_HANDLED_CONTEXT()
macro for appropriate execution and access to the custom fake
parameters.
A test suite is also provided to verify macro implementation and
illustrate usage. It is at:
zephyr/tests/subsys/testsuite/fff_fake_contexts/
This code was verified by:
1. (Pass) west build -p always \
-b unit_testing tests/subsys/testsuite/fff_fake_contexts/ && \
./build/testbinary
2. (Pass) west build -p always \
-b native_posix tests/subsys/testsuite/fff_fake_contexts/ && \
./build/zephyr/zephyr.exe
3. (Pass) ./scripts/twister -p unit_testing \
-T tests/subsys/testsuite/fff_fake_contexts/
4. (Pass) ./scripts/twister -p native_posix \
-T tests/subsys/testsuite/fff_fake_contexts/
5. (Pass) cd doc && build html-fast
Fix#55246
Signed-off-by: Gregory Shue <gregory.shue@legrand.com>
Some internal macros were still using 2 suffix which comes from
time when there was v1 and v2. Cleaning up by removing the suffix.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add some initial tests for the input subsystem, covering all the APIs in
both synchronous and thread mode.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add support for the Arduino GIGA board, an STM32H747XI based development
board in Arduino form factor, featuring external flash, SDRAM, Bluetooth
and WiFi.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Test is checking behavior of compile time macros used for generation
of log messages thus if platform enforces runtime approach does macros
are not available and complilation fails.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Noticed the tests were a bit verbose, saw a few stray printks. Drop those
as they aren't really needed and potentially cause testing issues, printk
is a potential synchronization point.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Renode platform fails the test despite it working well on qemu riscv.
Ignore this particular platform for now.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
By using an mpsc queue for each iodev, the iodev itself is shareable across
contexts. Since its lock free, submits may occur even from an ISR context.
Rather than a fixed size queue, and with it the possibility of running
out of pre-allocated spots, each iodev now holds a wait-free mpsc
queue head.
This changes the parameter of iodev submit to be a struct containing 4
pointers for the rtio context, the submission queue entry, and the mpsc
node for the iodevs submission queue.
This solves the problem involving busy iodevs working with real
devices. For example a busy SPI bus driver could enqueue, without locking,
a request to start once the current request is done.
The queue entries are expected to be owned and allocated by the
executor rather than the iodev. This helps simplify potential
tuning knobs to one place, the RTIO context and its executor an
application directly uses.
As the test case shows iodevs can operate effectively lock free
with the mpsc queue and a single atomic denoting the current task.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Adds a lock free/wait free MPSC queue to the rtio subsystem.
While the SPSC ring queue is fast and cache friendly it doesn't
work for all scenarios. Particularly the case where multiple rtio contexts
are attempting to work with a single iodev. An MPSC queue works perfectly
in this scenario.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Adds REQUIRED to samples and tests for finding the zephyr package
to align all samples and tests with the same call and parameters.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Rework the Host Command support. It includes:
-change API to backend
-change a way of defining rx and tx buffers
-fix synchronization between the handler and backend layer
-simplify the HC handler
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Follow naming pattern in the subsystems(logging or shell) and name
the layer between generic handler and peripheral driver "backend".
The name doesn't suit that well to the SHI backend, because there isn't
SHI API itself and the SHI interface is used only for the host
communication. So the backend code includes the peripheral driver itself.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
The Host Commands can be used with different transport layers e.g. SHI
or eSPI. The code that provides the peripheral API and allows sending
and receiving Host Commands via different transport layers is not
actually drivers of a peripheral, so move it to the
subsys/mgmt/ec_host_cmd folder.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Select in Kconfig causes many issues with dependency loops, this
resolves the issue by replacing most select with depends on for
MCUmgr, including updates to the sample smp_svr application and
tests.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The trigger mode is enabled by default in bmi160's Kconfig.
After adding the interrupt support for bmi160 i2c instance,
it needs to disable the trigger mode if there is not int-gpios
in dts.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Use message_bus as component in all zbus tests for better organisation
and to be able to select them in test plans.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fixes github issue #54537. Using a variable to point to the desired
format string generates a build warning when the -Wformat-security
compiler flag is used. To resolve this, replace the variable with
a macro to the format string.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Test will now use disk_access_ functions to erase FAT FS
disk before some operations when target disk is not set with
CONFIG_DISK_DRIVER_FLASH.
Fixes#53151
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The CAN ISO-TP conformance test expects to receive a frame within STmin
(5 msec) + upper tolerance (5msec) = 10msec. The expectation fails when
CONFIG_SYS_CLOCK_TICKS_PER_SEC is too low.
Skip the STmin test case to allow the test suite to succeed on non-tickless
and emulation platforms, where CONFIG_SYS_CLOCK_TICKS_PER_SEC defaults to
100. Enable the tests for native_posix and native_posix_64.
Fixes: #54254
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
