If server or bootstrap writes a lifetime value less than
configured default lifetime, client will automatically overwrite
the value with default one.
This gives better control for the application where client
behaviour is fine tuned on the Kconfig, but default values
from bootstrap server cannot be fine-tuned.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
This function had only one use in SenML CBOR formatter and it
contained some specific tweaks, so move the function to be a
static member of that module.
Fixes#53674
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When LwM2M engine is paused, stop functionality just
marks the intent and when we resume, it will send the
de-registration if that was requested.
Otherwise it will stay in SUSPENDED state until resumed
and then goes into ENGINE_DEREGISTERED -> IDLE.
This also removes the blocking loop from lwm2m_rd_client_stop().
It does not need to block because lwm2m_rd_client_start()
is already checking if client is in IDLE.
Fixes#56254
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Instead of passing the test parameters to the websocket function, by
casting the pointer to integer (which may not work on 64-bit platform
due to int/pointer size mismatch), let the test allocate a file
descriptor, and initialize it with test context. The tested functions
expect a file descriptor as an argument anyway, so it's a more intuitive
approach.
The conditional test code within WS implementation can retrieve the test
context by using FD APIs to obtain the object represented by the FD.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
C only permits labels on statements, not declarations. Separate the
declarations from the assignments so that the labels can target
statements instead.
Signed-off-by: Keith Packard <keithp@keithp.com>
We get compile warnings of the form:
error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint (and the other is* functions) return an int, change check
to an explicit test against the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
We get compile warnings of the form:
error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint (and the other is* functions) return an int, change check
to an explicit test against the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Add is_suspended() routine to have control over the rd client from the
outside whether it is suspended.
Signed-off-by: Andreas Chmielewski <andreas.chmielewski@grandcentrix.net>
Socketpair functionality has matured enough to be used in a
consistent way now regardless of architecture or platform,
even on `native_posix`.
Remove the experimental status to reflect that.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
The TX timeout configured with SO_SNDTIMEO on a socket did not work
properly. If the timeout was set on a socket, the TX would work as if
the socket was put into non-blocking mode. This commit fixes this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The timeout recalculation logic was duplicated across several routines,
therefore it makes sense to make a helper function out of it,
especially, that the same functionality would be needed for the send
routines.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently the zperf_tcp_receiver can handle only one TCP connection
each time, modify the code to poll and handle multiple connections.
Take the occasion to unify the bind and listen part of the code
between ipv4 and ipv6 part using a structure introduced to handle
the multiple connections.
Now in case the zsock_recv fails, we can't stop every connection
and fail through the error label, so just print the error message
and report the failure through the callback.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Reduce the scope of in4_addr_my and in6_addr_my pointer variables
that are currently global, but they are used only inside
tcp_receiver_thread.
Take the occasion to fix a typo in one error message.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Cast pointer to `void *` for `%p` parameter.
Otherwise lots of warnings in the log like below:
`<wrn> cbprintf_package: (unsigned) char * used for %p argument.
It's recommended to cast it to void * because it may cause
misbehavior in certain configurations. String:"%s: (%p): >>
length:0x%08x cur:%p, end:%p" argument:3`
Signed-off-by: Jun Qing Zou <jun.qing.zou@nordicsemi.no>
In dns_resolve_reconfigure() check if the DNS servers already exist
before cancel all ongoing queries. This will solve an issue with
getaddrinfo() returning DNS_EAI_CANCELED when receiving a retransmitted
DHCP offer and when receiving a IPv6 Router Advertisement.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
The multi resource and create flags were reversed, meaning that resources
were defined as multi resource but weren't being created by default. That
doesn't reflect the LWM2M Software Management, which specifies which
objects can be multi resource and which are mandatory.
The post write callbacks were assigned to the validate callbacks.
Signed-off-by: Michal Ciesielski <michal.m.ciesielski@voiapp.io>
1. `zsock_socket()` gets the right packet familiy.
2. `inet_pton()` returns 1 on success.
This should address #55193.
Signed-off-by: Sebastian Arnd <sebastianarnd@gmail.com>
Provide a means of declaring zero or more HTTP services, each
with zero or more static HTTP resources.
Static HTTP resources are those which have fixed paths[1] which
are known prior to system initialization. Some examples of
static http resources would be
* a forwarder from '/' to '/index.html'
* a REST endpoint with fixed path '/api/foo' and detail
pointing at some implementation-specific function
* a Javascript file in string form with fixed path '/js/util.js'
* a 'construction' image with path '/res/work.png'
* a gzip-compressed 'Hello' HTML file at '/hello.html'
Without describing in any detail how static HTTP resources are
organized or served by any given HTTP server, we can describe
what static resources exist on a system in a common way that
does not require any optional facilities (e.g. filesystem) and
relies only on addressable memory.
Additionally, for the purposes of simply allowing others
to implement custom HTTP servers in a consistent way, or
benchmarking implementations, or having a consistent testsuite
to use across multiple implementations, it is helpful to have
a common method to declare HTTP services and static resources
for Zephyr.
[1] https://en.wikipedia.org/wiki/URL
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Allow to register a callback function which is called when a firmware
update is canceled by the cancel command.
Signed-off-by: Marc Lasch <marc.lasch@husqvarnagroup.com>
Use internal constant ZSOCK_POLLIN instead of POLLIN to
make the http_client source file compile without error with
CONFIG_NET_SOCKETS_POSIX_NAMES disabled.
Fixes#55423
Signed-off-by: Lucas Dietrich <ld.adecy@gmail.com>
When a query is done, the query isn't set to NULL.
This can cause a nullptr exception in invoke_query_callback().
Signed-off-by: Jeroen van Dooren <jeroen.van.dooren@nobleo.nl>
Currently, in tcp_received function defined in zperf_tcp_receiver
module, the assignment of session->state to STATE_COMPLETED is
overwritten on the same path to STATE_NULL and a session is
considered free for both STATE_COMPLETED and STATE_NULL, so remove
the assignment to STATE_NULL.
Remove the break from the STATE_COMPLETED case handling so that it
can fallthrough, in case the same session is used after finish.
Remove also the STATE_LAST_PACKET_RECEIVED case because this state
is never reached.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
The modules zperf_udp_receiver and zperf_tcp_receiver use two
different functions to get a zperf session to store the
statistics, there is a TODO comment in the zperf_session module
suggesting to unify that part.
So delete the get_tcp_session function and use get_session for
both TCP and UDP receiver module.
Delete sock field from struct session because it's not used
anymore.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Currently the maximum number of zperf sessions handled is hardcoded
to 4, create a Kconfig parameter, with default value 4, to make the
maximum number of sessions configurable.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Use client context to seperate buffer usage.
Use new `TFTP_EVT_DATA` event to send data to application.
Use new `TFTP_EVT_ERROR` event to report error to application.
Update `tftp_get()` and `tftp_put()` API to use the client context.
Signed-off-by: Jun Qing Zou <jun.qing.zou@nordicsemi.no>
Actually `execute_cb` is fed with an array of char* and the size of
that array, instead of a single char* buffer and its byte size.
This fix expects a single, already joined, optional shell argument and
feeds `execute_cb` with proper arguments.
Signed-off-by: Stefan Schwendeler <Stefan.Schwendeler@husqvarnagroup.com>
In the header the websocket protocol needs a SHA1 hash. This is
implemented using the mbedtls_sha1 function. Select the option
MBEDTLS_MAC_SHA1_ENABLED from the Kconfig of websocket to ensure this
function is build in.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
There was a corner case that last registration timestamp was used
to detect if we can try UPDATE instead of full registration.
When timestamp was not cleared and DNS resolving failed, it might
cause engine to skip the resolving and continue retrying an UPDATE
message until timeout.
Fixes#54504
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When we have establised an DTLS handshake and try LwM2M Update,
if the server rejects it, we fall back to sending full registration
but when doing so, we should also clear out any observations.
It was intentional that we don't go to ENGINE_DO_REGISTRATION
state as that would close the socket and cause DTLS handshake.
Fixes#54974
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Only socket error that we should ignore is EAGAIN (EWOULDBLOCK),
others might be indicating that there are some serious errors
in network layer.
When network stack would block us, just drop the packet and
let CoAP layer handle the retrying.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Various functions, mostly concerning time-series cache, were not
using const pointer while they still did not modify the content.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Minor refactoring in getaddrinfo() to make the code easier to
read and to make handling IPv4 and IPv6 support more equal.
- Move common wait and error handling code to exec_query()
- Use the same check for CONFIG_NET_IPV4 and CONFIG_NET_IPV6
- Add extra sanity check for family before exec_query()
- Do not set errno when return DNS_EAI_ADDRFAMILY
Fix issue with setting port number for all DNS servers.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Add a callback for READ request to download files with arbitrary length.
Define TFTP_BLOCK_SIZE in API header for application to allocate buffer.
Signed-off-by: Jun Qing Zou <jun.qing.zou@nordicsemi.no>
New event LWM2M_RD_CLIENT_EVENT_REG_UPDATE to indicate
application that engine starts registration update.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Currently, if timeout is not configured for the network initialization in
the config module, the initialization function will configure IPv4/IPv6/
DHCPv4 regardless of the interface status. This is not the case when the
timeout is set, and the interface was not brought up during the timeout
period. This lead to ambiguity in terms of interface initialization.
This commits unifies the behaviour between these two cases. The
aforementioned initializations will always take place, regardless of the
interface status. The IPv4/IPv6 and DHCPv4 routines should be prepared
to deal with interfaces that are not brought up. The only difference
now, between timeout and no timeout scenario, is that the former will
report an error in case the timeout occurs wile waiting for the expected
events.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Socket faults or timeouts in CoAP deregistration messages
caused RD client state machine to restart registration.
Fixes#54136
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
If we are using `CONFIG_ARCH_POSIX`, then include
`<fcntl.h>`. Otherwise, include `<zephyr/posix/fcntl.h>`
since there are no requirements to use `CONFIG_POSIX_API`
internally.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
* include `<zephyr/posix/fcntl.h>` instead of `<fcntl.h>`
* drop unused logging header and module declaration
* reorder headers alphabetically
Signed-off-by: Chris Friedt <cfriedt@meta.com>
The websocket implementation did not comply with the RFC 6455 when it
comes to connection close. The websocket should send in such case Close
control frame. This commit fixes this behaviour.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
