Adds support for incoming and outgoing IPv4 fragmented packet support,
allowing a single packet that is too large to be sent to be split up
and sent successfully.
Signed-off-by: Jamie McCrae <spam@helper3000.net>
Logging v1 has been removed and log_strdup wrapper function is no
longer needed. Removing the function and its use in the tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
To be able to accept DHCP discover/request incoming packets the ip stack
neeeds to accept unspecified src addr if the destination is broadcast
address.
Signed-off-by: Olof Winge <olof@skyshaper.net>
In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Replace unpacked in_addr structures with raw buffers in net_ipv4_hdr
struct, to prevent compiler warnings about unaligned access.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make sure that in_addr/in6_addr structure size match the respective
binary IP address size with BUILD_ASSERT.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This can be used to implement tunneling, VPN etc. The virtual
interfaces can be chained together to support multilayer
network interfaces.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a function that allow caller to create IPv4 header with
possibility to set various fields in the header.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net_icmp4_input() may net_pkt_unref() a packet. The header mustn't be
accessed after this or the system may crash.
Signed-off-by: Oliver Hitz <oliver@net-track.ch>
Remove temporary interception of TCP, UDP for TTCN-3 based
TCP2 sanity check.
As a part of adding IPv6 support, TCP2 will register test
callbacks/inputs with net_conn_register().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
opts_len renamed to total_opts_len in previous changes.
But it's not replaced at one place.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If IPv4 header options has wrong options length
(e.g. options length is more that actual data),
then parser decrements opts_len without checking
actual data length. Which crashes the network stack.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Timestamp and RecordRoute options are supported
in only ICMPv4 EchoRequest call as per
RFC 1122 3.2.2.6.
Fixes#14668
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
IPv4 header options length will be stored in ipv4_opts_len
in net_pkt structure. Now IPv4 header length will be in
net_pkt ip_hdr_len + ipv4_opts_len. So modified relevant
places of ip header length calculation for IPv4.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Allow user to disable native IP stack and use offloaded IP
stack instead. It is also possible to enable both at the same
time if needed.
Fixes#18105
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive IPv4 packet where source address is unspecified
(all zeros), then we need to drop it.
Fixes#17427
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure we are able to receive UDP packets with broadcast
destination address. If CONFIG_NET_IPV4_ACCEPT_ZERO_BROADCAST
is set, then check here also non-standard broadcast address
that is described in RFC 1122 chapter 3.3.6.
Fixes#11617
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The "is this packet for us?" filter in net_ipv4_input() has a minor
logic error which fails to discard many packets which are.. not for us.
Fixes: #14647
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Since the new packet flow came in, payload comes at the end so udp
length for instance is known only when we "finalize" the packet.
However such finalization was still under the condition of chksum
offload, like it used to be in the former flow (udp headers were
inserted). This is obviously wrong but that was not caught with
existing driver in master as none of these drivers offloading
chksum calculation.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy - and unrelated - function named net_pkt_get_data has
been removed, we can rename net_pkt_get_data_new relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
IPv4 header might come with options, unlike IPv6, these are not
encapsulated in option header but are fully part of the IPv4 header.
Zephyr must handles these. Now silently ignoring their content and
setting the cursor to the payload properly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It is now unused anywhere: former net_pkt_get_src/dst_addr where the
only one using it and that has been changed since.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Though these are currently used by the core only, it will be then used
by net_context as well. This one of the steps to get rid of net_pkt's
appdata/appdatalen attributes.
Also normalizing all ip/proto parameters name to ip_hdr and proto_hdr.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Only next to be removed functions like net_tcp_set_checksum() are left
untouched. All the rest is switched.
Adding net_tcp_finalize() to follow the same logic as for UDP and else.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is meant to remove the need for macro NET_IPV4_HDR(), since we
don't know in future if accessing the header that way will be valid.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Function names will be normalized then by the couple create/finalize.
This one only sets the checksum.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As before, such header is meant to be in a contiguous area (beginning
of the buffer, only 20 bytes)
Opportunistically chaning the function name to net_ipv4_input() (all
will be create/finalize/input).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This API is meant to work with pre-allocated net_pkt.
It assumes net_pkt's buffer cursor is at the right position where to
create the IPv4 header. Once done, the cursor will be placed right
after the newly created IPv4 header.
Finalizing assumes the same.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
All IPv4 destination address related drop reasons in one place.
This helps also to have one unique call of net_conn_input().
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Remove network specific default and max log level setting
and start to use the zephyr logging values for those.
Remove LOG_MODULE_REGISTER() from net_core.h and place the
calls into .c files. This is done in order to avoid weird
compiler errors in some cases and to make the code look similar
as other subsystems.
Fixes#11343Fixes#11659
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
IPv4, ICMPv4/6, UDP, TCP: all checksums are meant to be one's complement
on a calculated sum. Thus return one's complement already from the right
place instead of applying it in each and every place where
net_calc_chksum is called.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
1. Clarify message telling that the actual packet length fed by the
driver differs from what specified in IPv4 header, and that leads to
drop.
2. Debug log any dropped packets in general.
These changes come from the experience of developing a networking
driver, where figuring out why packets get dropped may require
quite a head-scratching.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If we receive extra data at the end of the IP message, then
discard that data and accept the packet.
Fixes#11649
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As per RFC1112 sec 6.2 "A host group address must never be
placed in the source address field or anywhere in a source
route or record route option of an outgoing IP datagram."
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Unify the function naming for various network checking functions.
For example:
net_is_ipv6_addr_loopback() -> net_ipv6_is_addr_loopback()
net_is_my_ipv6_maddr() -> net_ipv6_is_my_maddr()
etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
