Added using LOG_DEFAULT_LEVEL kconfig option in log module
template for assigning the default log level to newly created
module instance, instead of assuming always INFO level.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
This feature adds support for using a custom function to format
the timestamp used for all logging backends. When the kconfig
option LOG_OUTPUT_FORMAT_CUSTOM_TIMESTAMP is set the custom
formatting function will always be used.
Signed-off-by: Hein Wessels <heinwessels93@gmail.com>
There was a bug in the BLE backend when it was the only enabled
backend. Instead of using the API `log_backend_activate` to
activate the backend, the logger requires the first time to be
enabled with `log_backend_enable`.
Signed-off-by: Victor Chavez <chavez-bermudez@fh-aachen.de>
Added a new logger backend to recieve data over a BLE
notification characteristic.
The characteristic is based on the UUID from the Nordic connect SDK
service NUS, which allows to have a UART shell over BLE.
The idea behind this, is that this logger can be used directly
with the NRF apps or any other BLE UART terminal app.
Signed-off-by: Victor Chavez <chavez-bermudez@fh-aachen.de>
We get compile warnings of the form:
drivers/console/uart_console.c:508:8: error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint returns an int, change check to an explicit test against
the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Package length was previously stored on 10 bits which limited
package size to 1023 bytes. Descriptor which contained package
length field had one unused bit which can be used to increase
package length field to 11 bits doubling the maximum package
length.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When packacge exceeds the limitation warning log is printed
and message is dropped.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Some internal macros were still using 2 suffix which comes from
time when there was v1 and v2. Cleaning up by removing the suffix.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Combining CONFIG_LOG_OUTPUT_FORMAT_LINUX_TIMESTAMP and
CONFIG_LOG_TIMESTAMP_64BIT results in a wrong timestamp, as the
Linux timestamp format print call assumes a 32 bit variable for
the seconds. Fix it by using a different print format for 64 bit
timestamps.
Fixes: #55372
Signed-off-by: Martin Sollie <ms@aziwell.no>
Handling panicking while in an ISR. Instead of attempting to call
`pm_device_get` for each character, ensure that the hardware is enabled
when `log_panic` is called.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Allow the log_backend_uart char_out implementation to integrate with
'Device Runtime Power Management'.
Without using runtime PM, it is impossible for the application to manage
the power state of a UART instance, given that any module in the
application could theoretically LOG_* or printk at any point in time.
This removes the need to manually call `pm_device_state_set` when the
lowest power states must be reached, while still allowing log messages
to be output.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
A fix to accept valid shell commands of the form `log backend
shell_rtt_backend disable`, i.e. to affect all modules when no modules are
specified.
Signed-off-by: Marco Argiolas <marco.argiolas@ftpsolutions.com.au>
The backend_name_get() function always sets 'entry->syntax' to
the name of the last backend, but a calling function iterates
over the idx until 'entry->syntax' is null.
Solution: Added a check that the index is less than the number
of backends and added getting the name of the backend
by the given index.
Signed-off-by: Mikhail Siomin <victorovich.01@mail.ru>
Array 'days_in_month' of size 12 may use index value bigger then
count of its elements.
Signed-off-by: PawelX Dobrowolski <pawelx.dobrowolski@intel.com>
Add reset of buffered messages counter to the initialization function.
It is for testing purposes sinces in the application logging is
initialized only once.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
If k_malloc() of filters fails in log_mgmt.c:link_filters_init(),
return an error and do not rely on the __ASSERT(0).
If __ASSERT_ON==0 in the build, assert will not trigger and
code will proceed to execute
memset(NULL, 0, sizeof(uint32_t) * total_cnt);
Avoid this by returning -ENOMEM on error.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
There are scenarios when it is necessary to globally redefine
a log macro. The existing logging frontend is not sufficient since
it redirects at the function level.
One example is using pigweed_tokenzier. The pigweed tokenizer depends
on intercepting log strings at the macro level to function.
Introduce an option to include a custom application provided header
named "zephyr_custom_log.h" at the end of log.h. This allows an
application to extend the LOG_* macros globally.
This change includes a simple test that redefines the core LOG macros
to include a custom prefix.
Signed-off-by: Rob Barnes <robbarnes@google.com>
As written, the title and description of the Kconfig option seem to
specify the logging sub-system will not flush until the buffer is full.
Someone reading this would expect that shorter log message will not be
flushed until the specified number of bytes accumulate.
This is not the case. Each log message is flushed when finished. The
size is only the maximum bytes of a single formatted message's contents
that will be accumated before the backend flushes.
What's more, it only applies in deferred mode. In immediate mode there
is no buffering, not just of multiple log messages but also of the
message contents as they are formatted.
Signed-off-by: Trent Piepho <tpiepho@gmail.com>
Users may want to do some configuration after the kernel is up, but
before initializing the log_core. Making the log_core's init priority
configurable makes that possible.
Signed-off-by: Ian Oliver <io@amperecomputing.com>
This changes the minimal logging Kconfig to select printk rather
than imply it, this is because if someone turns printk off,
minimal footprint logging does not work, therefore it needs to be
a requirement.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This allows putting the UART backend on a serial device that has to be
quiet unless logging is explicitly enabled at runtime.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Add a new Kconfig template that allow log modules to inherit their log
level from their parent module.
For example, the logs used in the Bluetooth audio like
`BT_AUDIO_STREAM_LOG_LEVEL` can inherit their level from
`BT_AUDIO_LOG_LEVEL`.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
This change will enable the logging system to handle printk() calls by
default if printk support is enabled, which improves output resiliency
when logging, mcumgr and printk calls are used. Will disable keep
LOG_PRINTK disabled for tests which are not using the new API as
moving to LOG_PRINTK causes test data to be output to a different UART
in the old test system.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Renamed the dma-buf-alignment field to a more explicit
and descriptive name dma-buf-addr-alignment.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
This configuration option gives the possibility to not enable
the fs backend on startup.
Backend can be enabled in runtime using log_backend_init and
log_backend_enable functions.
Implementation is based on log_backend_net.
Signed-off-by: Wojciech Slenska <wsl@trackunit.com>
Added link that sends messages over ipc_service. It uses
log_link_remote and will talk to log_backend_ipc_service based
on log_link_backend.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added backend that sends messages over ipc_service. It uses
log_backend_remote and will talk to log_link_ipc_service based
on log_link_remote.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added implementation of link and backend that are intended to
complement each other. Both requires transport function hooks
to be provided.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add support to multidomain case where source field contains
ID and not address of the source structure.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Adding multidomain support by introducing log_link module which
acts as a receiver of log messages created by another domain.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
log_cache is capable of storing fixed length byte arrays
identified by a generic ID. If entry identified by given ID
is not found in cache, the least recently used entry is evicted
from cache.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This was all done as part of the soc and called from the soc. Define
this type of console under drivers/console and use it in the SoCs
supporting that via SYS_INIT instead of calling the console code
directly.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For some reason, running sys-t with catalog message on
Cortex-M0 would result in hard fault in mipi_catalog_formatter()
if log_output_syst.c is complied before the backends (and weird
enough, only with SIZE optimization). This new ordering was
introduced in commit f5587552bb
as it was to group all backend source files under a single
directory.
Workaround the issue by compiling file later after backends
as this issue is causing CI failures. Actual root-cause is TBD.
Relates #50941
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Bring back Kconfig option which was previously removed by
9cd5086407 (previously named LOG_MSG_PKG_ALWAYS_ADD_RO_STRING_IDXS).
Renamed to shorten and be more descriptive. It can be useful for
external backends or frontends.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
To enable custom formatting of the log output while still using existing
backend, this commit adds the `log_output_custom` feature.
To use, register a commit with `log_custom_output_msg_set` then set the
log backend format set using `log_backend_format_set` with
`LOG_OUTPUT_CUSTOM`
Signed-off-by: Lucas Denefle <lucas.denefle@converge.io>
This is mainly to reduce clutter in `subsys/logging`, but also to make
backend management slightly easier.
Signed-off-by: Christopher Friedt <cfriedt@fb.com>
Add missing dependency since log_output_syst.c is calling functions
from log_output module.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Cbprintf has new feature where it can distinguish between
character pointers used for %p and %s. It is enabled by
flag CBPRINTF_PACKAGE_CONVERT_PTR_CHECK.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Casting the value byte to char may result in it being a negative
number. On some platforms this could lead to either UB, or a crash.
Signed-off-by: Dennis Sitelew <dennis.sitelew@grandcentrix.net>
The CONFIG_LOG_BACKEND_FORMAT_TIMESTAMP cannot be selected unless one of
the enumerated backends is selected. Add the ADSP_MTRACE backend to the
list, so timestamp formatting can be selected when only this backend is
enabled in the build.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Allow using log_output without the logging subsystem. It can be
used in the situation where external messages are processed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
During initialization of the FS backed, the oldest
file is always deleted.
Fix this to prevent throwing away useful historic logs.
If there is space left in the newest file, append to it instead
of creating a new file and removing the oldest.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Additional testing showed that when using printk the logger would start
sticking and spitting out nulls which is wrong. This made it appear as if
the firmware had locked up. The issue seems to have been caused by the
initial ipc message to read all the dma buffers on the host.
Removing that, the issue seems to have been solved.
This also improves the test case to ensure printk with LOG_PRINTK=y
works as expected. It also adds a last log message between some
timeouts of the flush timer length to ensure the padding and timer
flush are working properly.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
If the mtrace buffer gets full, the entries are dropped. This
is however not reflected in the "bytes_written" argument passed
to the hook function used to notify of new data in the buffer.
This behaviour becomes problematic in the case there is no
active consumer of the mtrace logs. To allow the client that has
registered the hook function, to act correctly in this case,
the bytes_written should reflect the actual bytes that have been
added to buffer.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add macro for logging raw formatted string. It is similar to
LOG_PRINTK macro but contrary to LOG_PRINTK it should not append
carriage return character to any new line character found in the
string. LOG_PRINTK processed by log_output module has that to
mimic printk behavior.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
