The commits adds support for nrf52840dk_nrf52840 with two additional
configurations:
- with FAT FS on internal SoC flash
- with FAT FS on QSPI connected MX25
In case of SoC configuration there is re-configuration of internal
partitions done, doe to need for at least of 64kiB for FAT FS.
The QSPI configuration only defines additional partition on
external device.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This sample is failing regularly in CI and locally for
qemu_cortex_a53_smp, seems like the stack is not enough:
thread_analyzer: 0x4001f740: STACK: unused 1040 usage 1008 / 2048 (49 %)
thread_analyzer: 0x4001f3a0: STACK: unused 944 usage 1104 / 2048 (53 %)
thread_analyzer: 0x4001f000: STACK: unused 1040 usage 1008 / 2048 (49 %)
...
Increasing to 2048 seems to make it run reliably.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
We get compile warnings of the form:
error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint (and the other is* functions) return an int, change check
to an explicit test against the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Added a new logger backend to recieve data over a BLE
notification characteristic.
The characteristic is based on the UUID from the Nordic connect SDK
service NUS, which allows to have a UART shell over BLE.
The idea behind this, is that this logger can be used directly
with the NRF apps or any other BLE UART terminal app.
Signed-off-by: Victor Chavez <chavez-bermudez@fh-aachen.de>
Clearing the shared memory is no longer required
after bounding functionality was reworked and an attempt
to read the magic numer is no longer the case.
Signed-off-by: Emil Obalski <Emil.Obalski@nordicsemi.no>
Similar to the changes made in #48048, compile in the appropriate lora
modem driver when `CONFIG_LORA=y`. The `LORA_SX12XX` symbol has no
use now so remove. LoRa and LoRaWAN subsystems are still marked as
unstable so no additional deprecation cycle is needed.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Input events with no associated device structure are valid. Handle them
in the sample by printing NULL instead of crashing trying to lookup the
device name.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Instead of assigning the address of value to the temporary function
parameter, there should be a dereference of the pointer and assignment
of PDOs count to it.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
We get compile warnings of the form:
drivers/console/uart_console.c:508:8: error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint returns an int, change check to an explicit test against
the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Add an initial board overlay in the input_dump directory for testing
zephyr,gpio-keys. This takes the exsiting "gpio-keys" node, changes the
compatible to the one used by the gpio keys input driver and set some
codes.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add a first input sample in the subsys/input directory. This just prints
any input event on the console.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
For the POSIX arch, this test relays on the native_posix RTC.
But that does not exist in the nrf52_bsim.
And without something to measure actual execution time,
it does not make sense to benchmark in the POSIX arch.
So disable this test for this platform,
and add a clear build error to warn users.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
A new Z_SPIN_DELAY() macro has been added which
can be used to reduce a bit the amount of noise
due to the POSIX arch need to break busy loops with
k_busy_wait().
Use it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
These Kconfig options are changing from select to depends on,
therefore make sure the needed options are used in the sample
project.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
These Kconfig options are changing from select to depends on,
therefore make sure the needed options are used in the sample
project.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Selects the FLASH_MAP Kconfig as this is changing from an automatic
selection to a depends on due to a dependency loop.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This drops using the environmental part when referencing ZEPHYR_BASE
as the environment value does not have to be set and, in most cases,
is no longer set at all.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
By using an mpsc queue for each iodev, the iodev itself is shareable across
contexts. Since its lock free, submits may occur even from an ISR context.
Rather than a fixed size queue, and with it the possibility of running
out of pre-allocated spots, each iodev now holds a wait-free mpsc
queue head.
This changes the parameter of iodev submit to be a struct containing 4
pointers for the rtio context, the submission queue entry, and the mpsc
node for the iodevs submission queue.
This solves the problem involving busy iodevs working with real
devices. For example a busy SPI bus driver could enqueue, without locking,
a request to start once the current request is done.
The queue entries are expected to be owned and allocated by the
executor rather than the iodev. This helps simplify potential
tuning knobs to one place, the RTIO context and its executor an
application directly uses.
As the test case shows iodevs can operate effectively lock free
with the mpsc queue and a single atomic denoting the current task.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Increase main stack size for next USB device stack config to prevent
stack overflow when FatFs is used. The new main stack size value matches
the value used in old stack mass storage sample config.
Fixes: #55210
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
LPC55S69 flash requires all writes be in multiples of 512 byte blocks.
Configure littleFS sample for these requirements when building targeting
the LPCXpresso55s69 EVK.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Introduce new USB Mass Storage Bulk-Only Transport implementation
written from scratch. Main goal behind new implementation was to
separate USB and SCSI parts as clearly as possible.
Limited set of SCSI disk commands is implemented in separate source code
file that is internal to USB device stack. While it should be possible
to use the SCSI implementation by other components there is currently no
other user besides USB MSC and therefore SCSI header is kept private.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
This demo prints out STARVING, HOLDING, EATING, DROPPED, THINKING. The
HOLDING state was missing and the EATING state was placed in the wrong
sequence.
Signed-off-by: Keith Packard <keithp@keithp.com>
Picolibc doesn't have any output buffering for printk, so the various
pieces of the status line would get interleaved between threads. Build the
whole line in memory using snprintk and then print it in a single printk
call.
Signed-off-by: Keith Packard <keithp@keithp.com>
Turn off display_blanking to make it able to refresh on a device
even when blanking default off.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Remove dependency on usb_device for virtual USB device / hosts sample.
This allows sample to be built in CI.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add support to run the sample on nrf52840dk_nrf52840 using
internal SoC flash, and external mx25 device over QSPI or SPI.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Adds missing selects for CONFIG_BASE64 for overlays which use
shell/UART transports that were not updated.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Select in Kconfig causes many issues with dependency loops, this
resolves the issue by replacing most select with depends on for
MCUmgr, including updates to the sample smp_svr application and
tests.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
() This makes the stack for both consumer and producer threads
larger to avoid stack corruption and overflow.
() Limit to 1 CPU to preserve ordering of output for twister.
() Remove the platform_exclude as they are passing now.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add Kconfig option for running the CAN ISO-TP sample in loopback mode. This
removes the need for a fixture when running the sample via twister.
Exclude the loopback tests for kvaser,pcican. See
836f582664 for more information.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The stm32g081b_eval board does not implement Dead Battery
functionality on PD Port2. Change the sample configuration
so that PD Port1 is used, which has Dead Battery support.
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
ENTROPY_GENERATOR is needed for OSDP Secure Channel capability. Now
that Secure Channel patches are merged, enabling it by default.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
Bluetooth does not need to be enabled to register services,
therefore the newly introduced automatic bluetooth SMP transport
registration system can be simplified by returning enabling of
bluetooth back to the application.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Disables allowing the python argparse library from automatically
shortening command line arguments, this prevents issues whereby
a new command is added and code that wrongly uses the shortened
command of an existing argument which is the same as the new
command being added will silently change script behaviour.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Enabling TLS increases stack usage by a small amount as that is where any
TLS variables are stored. When enabled, this sample ends up overflowing the
512-byte subscriber task stack and the IDLE_STACK_SIZE consumer stacks
Replace the fixed 512-byte subscriber stack allocation with
CONFIG_MAIN_STACK_SIZE so that it adopts a value controlled by the
configuration in case it needs to be adjusted further.
Increased CONFIG_IDLE_STACK_SIZE to 1024 to provide more space in each
consumer stack.
Signed-off-by: Keith Packard <keithp@keithp.com>
