Provide a sample for ivshmem-doorbell running under virtualization
(QEMU). The sample relies on existing tools (ivshmem-server,
ivshmem-client) that must be run at the host (unix).
The sample can be run on userspace or kernelspace, and on arm64 (qemu,
kvm) and x86_64 (qemu) platforms.
This execution of this code is quite complex, thus the README should be
made available in the official documentation. This is why the code is a
sample and not a test.
Signed-off-by: Rodrigo Cataldo <rodrigo.cataldo@huawei.com>
Co-authored-by: Henri Xavier <datacomos@huawei.com>
Add the config for testing the jesd jedec sfdp of the octoNor flash
on the stm32h573 disco kit.
The external octoflash is the macronix MX25LM51245 or micron.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add the new nucleo_h503rb board for testing the adc_api driver
on the ADC1 channel6 (pf12). Read the analog value of the ADC1
input on A5 of the arduino connector (CN16).
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Similar to the changes made in #48048, compile in the appropriate lora
modem driver when `CONFIG_LORA=y`. The `LORA_SX12XX` symbol has no
use now so remove. LoRa and LoRaWAN subsystems are still marked as
unstable so no additional deprecation cycle is needed.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add all boards where the required overlay is present in the boards
folder to platform_allow. At the same time sort the list alphabetically
to keep a better overview.
Signed-off-by: Martin Jäger <martin@libre.solar>
Remove "-machine Q35" from QEMU_EXTRA_FLAGS since this is now the
default qemu_x86_64 configuration.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Quark SE does not exist in zephyr anymore and this sample was there as
one of the first i2c users in Zephyr and is not providing any value any
more.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
After reworking counter driver to use device tree this sample
stopped to compile for nordic DKs. Providing overlays to fix
the compliation.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Remove overlay added by mistake. SMBus EEPROM PR is not merged and the
dts would be updated for qemu_x86_64 board's dts.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Treat sample data as signed when using differential mode for ADC
sampling, so that negative differential samples will be converted
correctly.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Update board overlays for boards with LPADC IP present on their SOCs, to
use new LPADC API for channel numbering.
For the RT595 and LPCxpresso55S69 EVKs, additional channels are enabled
to demonstrate the resolution and differential channel features of
the LPADC.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add a board overlay for sam4s_xplained. Channel 5 (PB1) is enabled as
well as the internal temperature sensor.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Add appropriate configuration parameters for using the Intel TCO
watchdog driver with the rpl_crb board.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add support for the Arduino GIGA board, an STM32H747XI based development
board in Arduino form factor, featuring external flash, SDRAM, Bluetooth
and WiFi.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add support for RT595 EVK to display sample using RM68200 based MIPI
panel. The board is configured with an increased heap size to account
for the panel's high resolution.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Microchip XEC devices specify GPIO pin using octal numbering and
organize pins in banks of 32. Chip documentation does not use
bank naming rather naming each pin by its octal number. This has
led to the developer having to calculate the bit position of a pin
in its 32-bit bank when a specifying the pin for GPIO usage. We
created a set of defines for all possible GPIO pins that specify
the DT GPIO bank name used in the chip level DTSI files and the
bit position in that bank.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
Adds REQUIRED to samples and tests for finding the zephyr package
to align all samples and tests with the same call and parameters.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Zephyr supports ADCs with 16-bit resolution, but the ADC sample
displayed readings for such incorrectly due to too-small datatype
This commit fixes the ADC sample for ADCs with 16-bit resolution
Signed-off-by: Ben Marsh <ben.marsh@helvar.com>
The Kconfig symbol CONFIG_SPI_FLASH_AT45 is selected by default if a
compatible device is enabled.
Remove obsolete config entry.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The Kconfig symbol for CONFIG_SPI_NOR is selected by default if a
compatible device is enabled.
Remove obsolete board config files.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Add a driver implementation that uses the I2S peripheral.
Based off this blog post:
https://electronut.in/nrf52-i2s-ws2812/
Should help with #33505, #29877 and maybe #47780, as there is no garbage
data at the end of transmissions on nRF52832, and no gaps.
Signed-off-by: Jonathan Rico <jonathan@rico.live>
Add the overlay file to run the samples/drivers/led_pwm
on the nucelo_u575zi_q board.
Two green leds are used on pc7 and pb7 corresponding to pwm
channels of timers3 and timers4.
The leds node has to be disabled to let the pin for the pwm nodes.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add the overlay file to run the samples/drivers/led_pwm
on the disco_l475_iot1 board. Two green leds are used on pa5 and pb14
corresponding on 2 pwm channels of timers2 and timers15.
The leds node has to be disabled to let the pin for the pwm nodes.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Configure the overlay file to run the samples/drivers/led_pwm
on the nucleo_l073rz and nucleo_f091rc board.
The green led is used on pa5 for pwm channels of timers2 channel
The leds node has to be disabled to let the pin for the pwm nodes.
The spi1 is disabled in that sample to avoid conflict on pa5 pin.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Current ipm_esp32 sample code requires esp32_net_firmware.c file
as source input, which is generated after ipm_esp32_net build.
esp32_net_firmware.c was manually added as binary blob, which needs to
be removed from the repository.
This change modifies ipm_esp32 CMakeLists.txt to include the build
output of ipm_esp32_net as input source of ipm_esp32 build, allowing the
binary blob to be removed.
Current approach shall be updated during next release.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Enables the watchdog timer within the DTS of supported boards,
add sample overlays showing how to use NMI WDT interrupts and
updated the board features inside the boards' doc / yaml files.
Signed-off-by: Stancu Florin <niflostancu@gmail.com>
