use hwinfo_get_reset_cause() instead of LL_PWR_IsActiveFlag_SB()
remove LL_PWR_ClearFlag_WU() not mandatory
Signed-off-by: Marc Desvaux <marc.desvaux-ext@st.com>
Modifying counter drivers (rtc and timer) to rely completely on
device tree and not on Kconfig of MDK flags.
Adapting dtsi for all SoCs and adapting test configuration.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Adds REQUIRED to samples and tests for finding the zephyr package
to align all samples and tests with the same call and parameters.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Change the samples/boards/stm32/backup_sram to run on the
nucleo_u575 or stm32u585 disco kit where the backup sram is enabled
Press the reset button to see that the content of the backUp SRAM
is not altered.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The BT Mesh Configuration Client API is used in an asynchronous manner
and the app key was not added before attempt binding it to mesh models.
This caused the binding functions to fail and resulted in a fail when
trying to to send mesh messages.
This commit registers a callback that is called when the app key is
assigned. After this callback is called, the binding functions are
called.
Signed-off-by: Jonas Remmert <j.remmert@phytec.de>
The sample is not fully working (yet) and it will be soon replaced.
Remove it to not confuse people.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The sample application shows how to configure NXP S32 Network Controller
(NETC) for different use-cases.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
sample.yaml was missing a tests section, making it unable to run with
twister. This patch adds the section.
While at that, fix an issue in the sample README.rst.
Fixes#53656.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Update usage of zephyr_code_relocate to follow new API. The old method
of relocating a file was the following directive:
zephyr_code_relocate(file location)
The new API for zephyr_code_relocate uses the following directive:
zephyr_code_relocate(FILES file LOCATION location)
update in tree usage to follow this model. Also, update the NXP HAL SHA,
as NXP's HAL uses this macro as well.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Disables having USB enabled for boards that configure USB CDC for
console, shell or logging at bootup in applications that enable USB
to prevent a conflict arising whereby USB is registered from
multiple points and later calls fail.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Add a sample to put the part into Deep power down mode by
setting the state to PM_STATE_SOFT_OFF.
Wakup the part using an RTC alarm.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Fix all hyphens errors detected by yamllint:
yamllint -f parsable -c .yamllint $( find -regex '.*\.y[a]*ml' ) | \
grep '(hyphens)'
Default config is only one space after the hyphen.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Fix all thruthy errors detected by yamllint:
yamllint -f parsable -c .yamllint $( find -regex '.*\.y[a]*ml' ) | \
grep '(truthy)'
This only accepts true/false for boolean properties. Seems like python
takes all sort of formats:
https://github.com/yaml/pyyaml/blob/master/lib/yaml/constructor.py#L224-L235
But the current specs only mention "true" or "false"
https://yaml.org/spec/1.2.2/#10212-boolean
Which is the standard yamllint config.
Excluding codeconv and workflow files, as some are using yes/no instead
in the respective documentation.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
CONFIG_SOC_MEC1501_TEST_CLK_OUT is removed from mec15xx SOC,
hence remove this configuration in mec15xxevb power management
sample and add board overlay with right configurations.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
This replaces the requirement for applications to manually
register MCUmgr handlers by having an iterable section which
then automatically registers the handlers at boot time.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Allow enabling CDC ACM logging only if CDC ACM is not used as logging
backend. This prevents endless recursive logging loop, especially
visible when minimal footprint logging is enabled.
Fixes: #52981
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add deep sleep sample code with support for the
following wake-up sources:
- Timer
- EXT0/EXT1: IO under RTC domain
- GPIO (ESP32-C3 only)
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
integration_platforms help us control what get built/executed in CI and
for each PR submitted. They do not filter out platforms, instead they
just minimize the amount of builds/testing for a particular
tests/sample.
Tests still run on all supported platforms when not in integration mode.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The `bluetooth/common/log.h` and `bluetooth/common/log.c` files have been
removed. Files that were using them have been updated to use
`zephyr/logging/log.h` instead.
Those replacement have been done consequently:
- `/BT_DBG/LOG_DBG/`
- `/BT_ERR/LOG_ERR/`
- `/BT_WARN/LOG_WRN/`
- `/BT_INFO/LOG_INF/`
- `/BT_HEXDUMP_DBG/LOG_HEXDUMP_DBG/`
- `/BT_DBG_OBJ_ID/LOG_DBG_OBJ_ID/`
Also, some files were relying on the `common/log.h` include to include
`zephyr/bluetooth/hci.h`, in those cases the include of `hci.h` has
been added.
For files that were including `common/log.h` but not using any logs,
the include has been removed and not replaced.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Add CONFIG_CRC for building CRC related routines.
CRC routines are now being built for each application, whether used or
not and are add in the build system unconditionally.
Keep CONFIG_CRC enabled by default for now and until all users have
converted to use the new option.
Partial fix for #50654
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
A simple sample with some (explained) tricks to get code relocation for
Intel ADSP CAVS platforms.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Now that IPM drivers are enabled based on devicetree we can
remove any cases of them getting enabled by Kconfig, *defconfig*,
and *.conf files.
We need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Remove inclusion of moved and non needed header.
Other unneeded headers have been also removed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
First pads are being configured for use by the FPGA.
Then CPU loads usbserial bitstream.
Finally it reenables clocks, sets up USB PID and waits for device to
enumerate.
Also disable software resets in used clocks.
Signed-off-by: Michal Sieron <msieron@antmicro.com>
Change automated searching for files using "IRQ_CONNECT()" API not
including <zephyr/irq.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
A sample project for ESP32 Ethernet testing.
Possibly this should be consolidated into existing networking samples
Signed-off-by: Grant Ramsay <grant.ramsay@hotmail.com>
Use inline literals where applicable -- especially for the words that
contain `@`; otherwise, Sphinx will think it is an email address.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This overlay shows the LPUART at 9600 with wakeUp capability
to exit the nucleo_wl55jc target plaform from the low Power
stop mode, EXTI_Line 28 is the corresponding wakeUp source.
The LPUART is sourced by the LSE (32768Hz) and max baudrate
is 9600. Set the console to 9600.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
`samples/net/wifi` replaces custom esp32 wifi sample
code. Then it can be removed from main repository.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This PR adds a `*_cli_*` infix to the Config Client API to match
the changes in Health Client. The old API is marked as deprecated.
Signed-off-by: Michal Narajowski <michal.narajowski@codecoup.pl>
On STM32 PM serial wakeup sample, a power efficient configuration using
lpuart is provided for stm32l562e_dk target.
Though, since default configuration of the board is using ST-Link virtual
port com on uart1, which can't be changed in CI and hence can't be tested,
then remove this target from sample yaml configuration.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Now that Wifi drivers are enabled based on devicetree we can
remove any cases of them getting enabled by *.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Since the change in the PR #49167
samples: boards: stm32: serial_wakeup: fix device usage issues
the sample should not check the "Device ready" anymore
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This commit retrains the power management testcase
tests/samples/boards/stm32/power_mgmt/serial_wakeup
to bun on stm32 boards only.
Limiting first to nucleo_wg55 and stm32l562dk targets,
more to be added.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
