Fix RAM overflow building for direction finding feature on
nRF53 Series, by reducing thread stack sizes. And move
building DF plus CIS feature to hci_uart sample from
hci_rpmsg sample.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix RAM overflow by using default values for
BT_BUF_ACL_RX_SIZE and BT_BUF_ACL_RX_COUNT. Default Rx size
of 27 is sufficient for nRF51 SoC, as it does not support
data length extensions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
We get compile warnings of the form:
error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint (and the other is* functions) return an int, change check
to an explicit test against the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
The unicast client used the BT_DATA_UUID16_SOME and
BT_DATA_UUID16_ALL instead BT_DATA_SVC_DATA16 for
discovering ASCS servers.
BT_DATA_SVC_DATA16 is the right one to use, as that
is mandatory for a server to advertise, and the UUID
ones are only recommended. Furthermore, the service data
of the ASCS server can now also be retrieved.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
From now app layer is able to return explicit response code and
reason that will appear in ASE Control Point notification.
Fixes issues of ASCS/SR/SPE/BI-(07/08/09)-C PTS test cases, where
PTS was receiving wrong response codes and reasons.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
Add kconfig to let the ISO broadcast and ISO receive samples report
packets no more than once per set interval of packets.
Signed-off-by: Frode van der Meeren <frode.vandermeeren@nordicsemi.no>
Some recent PRs included conditional compilation for
KCONFIG_BT_LL_SW_LLCP_LEGACY, which must be removed.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
This commit removes the legacy LLCP code including the
Kconfig option
It also updates the babblesim tests, and removes the
tests for the legacy controller
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
To enable Bluetooth controller coexistence feature, there is
implementation of ticker task, which aborts any ongoing radio events
during assertion of the grant pin. This solves the co-existence issue
in the role of the subordinate transceiver.
Signed-off-by: Tomáš Beneš <tomas@dronetag.cz>
Remove duplicated board specific conf file for iso_broadcast
and iso_receive samples. Instead, have an overlay conf file.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Several places used the bt_audio prefix where it shouldn't.
Also moved the BAP documentation to its own file.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added a new header file bap_lc3_preset.h which contains
the definitions of the LC3 (pre)sets defined by the
BAP spec.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename the bt_audio_unicast_client API to bt_bap_unicast_client
and move the API to bap.h
Also adds the _bap_ infix to the bt_unicast_client functions.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename the bt_audio_audio_server API to bt_bap_unicast_server
and move API to bap.h.
This also adds the _bap_ infix for bt_unicast_server.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Removes the unused pac_pache from the unicast_client.
This moves the storing of the PAC records (in the form of
struct bt_codec) from the stack to the upper layers.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The sample was only willing to connect if the pair RSSI level
was over -35dBm. That is ok when testing physically keeping
devices at less than 1 meter from each other.
But in CI we test with a default attenuation of 60dB between
devices and the Tx power is 0dBm.
Which causes the tests based on this sample to fail.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The sample was only willing to connect if the pair RSSI level
was over -40dBm. That is ok when testing physically keeping
devices at less than ~1 meter from each other.
But in CI we test with a default attenuation of 60dB between
devices and the Tx power is 0dBm.
Which causes the tests based on this sample to fail.
Fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
nrf51 has been discontinued. There is no reason to support
ble mesh as well as new mesh features and fitting of samples
for nrf51 DK platforms. As alternative support of nrf52840
has been added if there wasn't before.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
This drops using the environmental part when referencing ZEPHYR_BASE
as the environment value does not have to be set and, in most cases,
is no longer set at all.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Allow the Unicast Audio Client sample to work if there are no
sink or no source ASEs on the remove device (e.g. if the remote
device only has sink ASEs).
If the remote have neither, it will abort.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The Zephyr controller does not support PAST, and there
is no other controller we can build upstream with these samples.
Disable these 2 samples for the nrf52_bsim until PAST
is supported by the controller.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
If waiting on the first semaphore in the main loop times out, the main
loop starts from the beginning and attempts to start scanning for
broadcast sources. But since the first semaphore was not passed, the
scan_recv_cb callback was not called yet and thus the previously started
scanning was not stopped. As a result, an attempt to start the scanning
will fail with -EALREADY and the main thread will end. To solve this,
-EALREADY is now ignored when checking the return value of
bt_audio_broadcast_sink_scan_start.
Signed-off-by: Ladislav Podivin <ladislav.podivin@tietoevry.com>
Set the bbc_microbit board as part of the integration platforms, since
the sample is designed for the board and so CI should fail if the sample
no longer builds for it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The sample no longer fits in RAM, reduce the number of discardable
packets to make it fit.
Fixes#55328.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since the commit 897d2b8204 ("boards: arm: nrf52840dongle_nrf52840: Use
USB CDC as default UART") this board has the 'cdc_acm_uart' node defined
and selected (with 'chosen' node) as 'bt-c2h-uart' by default. Overlay
file is no longer required.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Only the receiver of the audio is allowed to send the
receiver start ready command.
Furthermore, this removes the automated transition to the
streaming state on the server, as the server now shall
call bt_audio_stream_start to put the stream into the
streaming state.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This instance might be shared by other users that may have opened it
earlier in the boot chain.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Zero initialize has_param in BSIM test.
Also, specify all bt_has_register_param members in hap_ha sample.
Signed-off-by: Lars Knudsen <larsgk@gmail.com>
- Include ISO stream count in ISO streams definitions in
controller.
- Create ISOAL source on controller when ISO data path is
setup.
- Send broadcast data buffers transferred from host over
HCI to ISOAL as ISO SDU fragments.
- Allow bot conn and ISO data to use data_buf_overflow.
- Store ISO interval during BIG create.
- Remove ISO data path for each BIS during BIG terminate
procedure.
- Set value (temporarily) for ISOAL target_event enabling
it to Tx data.
- Check status of data fragment sent to ISOAL for memory
allocation and other errors.
- Destroy ISOAL source when ISO stream released.
- Use ISO Advertising handle, not stream handle to destroy
ISO data path.
- Remove extra ISOAL sink destroy call when removing ISO
data path.
- Add FIXME comment as reminder to address LL_ASSERT on
isoal_status error.
Signed-off-by: Carl Stehle <droid@appception.com>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add direction finding, Broadcast ISO and Connected ISO conf
files for build coverage and user convenience to build
respective binaries for nRF53 Series network core.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The HIDs sample is currently setup with a passkey callback and requires
authenticated write and read access.
Add a sample option to disable the passkey callbacks, and automatically
set the GATT attributes as encryption required. This is a useful sample
setup as real world HID devices (mice, keyboards...) usually don't have
a passkey mechanism, and removing the callback to reproduce that setup
while not changing the GATT permission leads to automatic disconnections
for encryption failures that can be fairly hard to troubleshoot.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
