The commits adds support for nrf52840dk_nrf52840 with two additional
configurations:
- with FAT FS on internal SoC flash
- with FAT FS on QSPI connected MX25
In case of SoC configuration there is re-configuration of internal
partitions done, doe to need for at least of 64kiB for FAT FS.
The QSPI configuration only defines additional partition on
external device.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Provide a sample for ivshmem-doorbell running under virtualization
(QEMU). The sample relies on existing tools (ivshmem-server,
ivshmem-client) that must be run at the host (unix).
The sample can be run on userspace or kernelspace, and on arm64 (qemu,
kvm) and x86_64 (qemu) platforms.
This execution of this code is quite complex, thus the README should be
made available in the official documentation. This is why the code is a
sample and not a test.
Signed-off-by: Rodrigo Cataldo <rodrigo.cataldo@huawei.com>
Co-authored-by: Henri Xavier <datacomos@huawei.com>
Add the config for testing the jesd jedec sfdp of the octoNor flash
on the stm32h573 disco kit.
The external octoflash is the macronix MX25LM51245 or micron.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Fix RAM overflow building for direction finding feature on
nRF53 Series, by reducing thread stack sizes. And move
building DF plus CIS feature to hci_uart sample from
hci_rpmsg sample.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix RAM overflow by using default values for
BT_BUF_ACL_RX_SIZE and BT_BUF_ACL_RX_COUNT. Default Rx size
of 27 is sufficient for nRF51 SoC, as it does not support
data length extensions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add esp32s3 overlay to qdec sample to ilustrate
the use of PCNT in quadrature enconder mode.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Make queues used in metairq dispatch sample capable of storing all
generated messages. This prevents seemingly random hangs that tend to
happen with some random seeds.
Fixes: #54610
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Builds on warp7_m4 were overflowing flash, hence the change to
the another platform from the allow_list, which is not causing
overflows.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
This sample is failing regularly in CI and locally for
qemu_cortex_a53_smp, seems like the stack is not enough:
thread_analyzer: 0x4001f740: STACK: unused 1040 usage 1008 / 2048 (49 %)
thread_analyzer: 0x4001f3a0: STACK: unused 944 usage 1104 / 2048 (53 %)
thread_analyzer: 0x4001f000: STACK: unused 1040 usage 1008 / 2048 (49 %)
...
Increasing to 2048 seems to make it run reliably.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
We get compile warnings of the form:
error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint (and the other is* functions) return an int, change check
to an explicit test against the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Added a new logger backend to recieve data over a BLE
notification characteristic.
The characteristic is based on the UUID from the Nordic connect SDK
service NUS, which allows to have a UART shell over BLE.
The idea behind this, is that this logger can be used directly
with the NRF apps or any other BLE UART terminal app.
Signed-off-by: Victor Chavez <chavez-bermudez@fh-aachen.de>
Clearing the shared memory is no longer required
after bounding functionality was reworked and an attempt
to read the magic numer is no longer the case.
Signed-off-by: Emil Obalski <Emil.Obalski@nordicsemi.no>
Add the new nucleo_h503rb board for testing the adc_api driver
on the ADC1 channel6 (pf12). Read the analog value of the ADC1
input on A5 of the arduino connector (CN16).
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Similar to the changes made in #48048, compile in the appropriate lora
modem driver when `CONFIG_LORA=y`. The `LORA_SX12XX` symbol has no
use now so remove. LoRa and LoRaWAN subsystems are still marked as
unstable so no additional deprecation cycle is needed.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Move tfm_merged.hex from <build>/tfm_merged.hex to
<build>/zephyr/tfm_merged.hex.
Use relative path to the runners.yaml hex file.
This makes it possible to move the build folder.
Example would be to copy out the runners.yaml and tfm_merged.hex file
and still be able to call west flash --skip-rebuild.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
We get compile warnings of the form:
error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint (and the other is* functions) return an int, change check
to an explicit test against the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Add all boards where the required overlay is present in the boards
folder to platform_allow. At the same time sort the list alphabetically
to keep a better overview.
Signed-off-by: Martin Jäger <martin@libre.solar>
Remove "-machine Q35" from QEMU_EXTRA_FLAGS since this is now the
default qemu_x86_64 configuration.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
use hwinfo_get_reset_cause() instead of LL_PWR_IsActiveFlag_SB()
remove LL_PWR_ClearFlag_WU() not mandatory
Signed-off-by: Marc Desvaux <marc.desvaux-ext@st.com>
Quark SE does not exist in zephyr anymore and this sample was there as
one of the first i2c users in Zephyr and is not providing any value any
more.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
After reworking counter driver to use device tree this sample
stopped to compile for nordic DKs. Providing overlays to fix
the compliation.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
SMP sample applications are located in the 'arch' directory.
This patch fixes the pathname for SMP sample examples.
Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com>
The unicast client used the BT_DATA_UUID16_SOME and
BT_DATA_UUID16_ALL instead BT_DATA_SVC_DATA16 for
discovering ASCS servers.
BT_DATA_SVC_DATA16 is the right one to use, as that
is mandatory for a server to advertise, and the UUID
ones are only recommended. Furthermore, the service data
of the ASCS server can now also be retrieved.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove overlay added by mistake. SMBus EEPROM PR is not merged and the
dts would be updated for qemu_x86_64 board's dts.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Treat sample data as signed when using differential mode for ADC
sampling, so that negative differential samples will be converted
correctly.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Update board overlays for boards with LPADC IP present on their SOCs, to
use new LPADC API for channel numbering.
For the RT595 and LPCxpresso55S69 EVKs, additional channels are enabled
to demonstrate the resolution and differential channel features of
the LPADC.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add a board overlay for sam4s_xplained. Channel 5 (PB1) is enabled as
well as the internal temperature sensor.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
To disable the flash by default so the openthread RAM
settings backend is used instead.
This allows using this samples with the overlay-ot.conf
directly in the simulated nrf52_bsim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
