Add a new backend for Host Commands that uses UART. The backend bases
asynchronous UART API.
The UART backend is mainly used by FPMCU.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Add lwm2m_engine_pause() and lwm2m_engine_resume() and their
states into the state machine description.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The emulated RTC device driver is used to emulate a real
RTC device. Note that it is not a replacement for the
native_rtc module, which is used to control simulated time,
get time from the host system, etc.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
This test suite adds tests for the following:
- Setting and getting time
- Validating time is incrementing correctly
- Validating behavior of alarms with callback disabled
- Validating behavior of alarms with callback enabled
- Validating update callback
The test suite uses the devicetree alias rtc to find
the device to test.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
This commit adds the rtc.h header file which contains
API functions for real-time-clocks, which are low power
devices which track and represent broken-down time.
It also changes one line of doxygen documentation in the
maxim_ds3132.h file to place it in its own group.
The handlers for use of the API from userspace is also
added with this commit.
The API is split into one mandatory section, setting and
getting time, and three optional sections, alarms, update
event callback, and clock calibration.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
This fixes a typo in the testing framework docs where the
ZTEST_EXPECT_SKIP MACRO seems to be referring to the wrong function.
Signed-off-by: Ivan Herrera Olivares <ivan.herreraolivares@gmail.com>
Clarify the debugging section by adding subsections for the GDB client
and server. Add information about reading the system console while
debugging. Make formatting a bit more consistent generally.
Signed-off-by: Abe Levkoy <alevkoy@google.com>
Adds details on the update fs_mgmt features for faster
uploads/downloads and new Kconfig entries added.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds information on updated fs_mgmt functionality and describes
the new optional file close command.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds "fragment" to the Kconfig text, this is because these files
are known as Kconfig fragments, and when searching the
documentation for this, all you get are irrelevant results instead
of this page - which is by far the most important one.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Update the save-temps instruction to mention the new kconfig option
instead of setting EXTRA_CFLAGS directly.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Unify the peripheral documentation title strings to the format
"<class> [(acronym)] [Bus]".
Including both the full name of the peripheral class and an acronym makes
the documentation more user friendly as some of the acronyms are less
well-known than others.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The note previously mentioned that, when "upgrade" flag is present,
uploaded image version can not be lower than version of a running
application; this has been corrected as uploaded image should
have version higher than running, as "upgrade" only flag makes
no sense when same version is uploaded.
Additionally note that Zephyr does not support this feature has
been removed, as MCUmgr library within Zephyr does actually
perform the version check when "upgrade" flag is set.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Adds a note that the upload response hash is partially
optionally from the point of view of MCUboot's serial recovery.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Document this new build system feature.
Since its purpose is customizing application builds, the logical place
for the main body of documentation is in a new snippets/ directory in
doc/build/. Create that directory and add its initial documentation.
Like boards and samples, however, we expect people to write
documentation for each snippet within the directory that defines the
snippet itself. Therefore, add a new top-level snippets/ directory and
stub out the documentation needed to document individual snippets as
well.
Add documentation and cross-references in other required places as
well.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Add note highlighting change to LPADC channel selection setup, so that
users will be aware they need to change their devicetree configuration
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Some systems can support only legacy OOB pairing while others only
LE SC OOB pairing.
The existent API function "bt_set_oob_data_flag" was removed.
Two new API functions were added:
* "bt_le_oob_set_legacy_flag" to signal that legacy OOB pairing is used
* "bt_le_oob_set_sc_flag" to signal that LE SC OOB pairing is used
The code will now advertise the presence of OOB flag depending
on the type of pairing method(SC vs legacy)
Signed-off-by: Sebastian Panceac <sebastian.panceac@ext.grandcentrix.net>
In order to take granular input use micro seconds as input for TWT
intervals, this helps us in providing inputs such as 65.28ms without the
need of using floating points.
This also expands the TWT wake interval range to 262.144ms, earlier as
we want to use uint8, limited to 256ms.
Also, remove the units from the variable names, this is unnecessary and
also avoids doing breaking changes.
Update release notes as this is a breaking change, both type and
variable names are changed.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
Updates the release notes to document a clarification to the sensor
driver API on sensor triggers.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
WestCommand has no .configuration field, it's .config.
In the same (and cursed!) sentence, also fix the broken link to
west.command.WestCommand by switching the link target from the
unusual `py:class::` to the common `autoclass::` used by all other
classes in the same page. I don't understand why that fixes the
hyperlink but it works and it's consistent.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Add supplementary header <zephyr/fff_extensions.h>. Add macro
to fff_extensions.h for simplifying definition of custom fake functions
needing call-unique information for producing desired output data.
When an array of custom fake context structures is defined and
the return field within the first structure instance is registered
with the standard SET_RETURN_SEQ() macro of FFF, the
RETURN_HANDLED_CONTEXT() macro provides the inverse logic to
recover the context structure for this called instance. The body of
the custom fake handler is provided to the RETURN_HANDLED_CONTEXT()
macro for appropriate execution and access to the custom fake
parameters.
A test suite is also provided to verify macro implementation and
illustrate usage. It is at:
zephyr/tests/subsys/testsuite/fff_fake_contexts/
This code was verified by:
1. (Pass) west build -p always \
-b unit_testing tests/subsys/testsuite/fff_fake_contexts/ && \
./build/testbinary
2. (Pass) west build -p always \
-b native_posix tests/subsys/testsuite/fff_fake_contexts/ && \
./build/zephyr/zephyr.exe
3. (Pass) ./scripts/twister -p unit_testing \
-T tests/subsys/testsuite/fff_fake_contexts/
4. (Pass) ./scripts/twister -p native_posix \
-T tests/subsys/testsuite/fff_fake_contexts/
5. (Pass) cd doc && build html-fast
Fix#55246
Signed-off-by: Gregory Shue <gregory.shue@legrand.com>
