Two ethernet capabilities were missing. Added them to allow
the 2.5G and 5G strings to appended.
Signed-off-by: Christoph Seitz <christoph.seitz@infineon.com>
CONFIG_ZVFS_POLL_MAX is now used to control the maximum number of poll()
entires. Thereby, CONFIG_NET_SOCKETS_POLL_MAX is redundant and shall
be deprecated.
Modify the defaults for NET_SOCKETS_POLL_MAX and ZVS_POLL_MAX so that
the deprecation actually makes sense instead of symbol removal. In case
the application still sets the old config, it will modify the
ZVS_POLL_MAX default.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
IPv6 MLD API was so far defined in an internal header. This does not
seem correct though, as application code should be able to join/leave
multicast groups, hence the API should be exposed in a public header,
just as it is done for its IPv4 countepart - IGMP.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The stack size for the event_mon_stack task may need to be larger than the
default 1024 to avoid crashes. It should be configurable through Kconfig
so that source code doesn't need to be modified to increase it.
Signed-off-by: Dave Rensberger <davidr@beechwoods.com>
If DNS statistics is enabled in Kconfig, then start to collect it.
This is useful in order to see how many DNS requests/responses
received or sent, and also see the amount of dropped DNS packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
User can set CONFIG_NET_SHELL_SHOW_DISABLED_COMMANDS=n to prevent
unused net-shell commands from showing. This can save flash as
the disabled commands will not be shown in net-shell listing.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
It is useful to know the currect status of DHCPv6 client when
printing the interface information.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow "net virtual" command to attach or detach virtual
interfaces. This is useful for device management.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Increased variable to the mandatory amount of commands, since the
comment of SHELL_SUBCMD_ADD states
"Number of mandatory arguments including command name"
but net suspend takes the interface number to suspend
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
Since the `_impl` naming convention is intended for internal use only,
renaming these functions to the `shell_fprintf_xxx` variant is
more suitable for calls outside the module:
- `shell_info_impl` to `shell_fprintf_info`
- `shell_print_impl` to `shell_fprintf_normal`
- `shell_warn_impl` to `shell_fprintf_warn`
- `shell_error_impl` to `shell_fprintf_error`
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Building with NEWLIBC triggers warnings about
snprintf since stdio is no longer automatically
included by printk.h
This PR switches to using snprintk to avoid these
warnings.
Fixes#77330
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Adds commands for triggering conn_mgr functions and
tweaking conn_mgr connectivity flags.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
adds filesystem as a resource for the http_server which serves static
(gzipped) files from a filesystem to the client.
Signed-off-by: Gerhard Jörges <joerges@metratec.com>
Due to the introduction of `shell_xxx_impl` wrapper functions in
PR #75340, we can minimize caller overhead by eliminating direct
`color` parameter passing.
This is achieved by using `shell_print_impl`, `shell_error_impl`,
`shell_info_impl` and `shell_warn_impl` instead of `shell_fprintf`.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
In case packet read fails for any reason, there's no point proceeding or
printing the byte, just break the loop in such case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
For each of the fdtable.h functions listed below, convert the
z_ prefixed semi-private functions to use the zvfs_ prefix.
ZVFS stands for Zephyr Virtual File System and
is intended to be a common library used by the C library,
POSIX API, Networking, Filesystem, and other areas.
There are already a few functions in fdtable.h that use the
zvfs_ prefix, so this change is mostly about unifying them in
a way that uses a suitable prefix ("namespace") so that it can
be considered a public API.
- z_alloc_fd
- z_fdtable_call_ioctl
- z_finalize_fd
- z_finalize_typed_fd
- z_free_fd
- z_get_fd_obj
- z_get_fd_obj_and_vtable
- z_get_obj_lock_and_cond
- z_reserve_fd
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Add descriptions for recently introduced IPv4 and IPv6
connectivity events to the net event monitor.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Add option for setting a random MAC address to
the net iface set_mac command. With random option
a random MAC address can be assigned to an interface.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
The new command is "net http" which shows all services and
related resources defined in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Fixing the websocket command output to align the fields and
printing interface index instead of a pointer value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When printing IPv4 and IPv6 address information in "net ipv4" and
"net ipv6" commands, print also reference count of the IP address.
This is useful for debugging purposes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add events to be generated when privacy extension is enabled
or disabled, or when allow/deny filter is added or deleted.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When executing "net iface" command, print current status of
IPv6 privacy extension if it is enabled in config file.
The "net ipv6 ..." command prints IPv6 privacy extension
information, and can add or delete IPv6 prefix filters.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If IPv6 address expires and moves to deprecated state, then
send a mgmt event so that listeners can act on it.
One such action is to close a socket bound to that source address
so that the address can be released.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This commit change a method of printing multicast routes by showing
all interfaces per entry instead of aggregating them by interface.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
Remove IPSP support from the tree.
It has no maintainers, and is regularly broken. The fact that it's
nontrivial to set-up in linux makes it hard to fix reported issues.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
If user created the capture device using the API and not via
the shell, then the device name was not set. Use the default
capture device in this case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The event NET_EVENT_CAPTURE_STARTED is generated when the
capture is enabled, and NET_EVENT_CAPTURE_STOPPED when capture
is disabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add hostname changed printout to event monitor. As the name
says, it is generated when the hostname of the device changes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Instead of having a single config specifying the memory pool size for
variable-sized net buffers, have a separate one for TX and RX for better
configuration granularity when optimizing memory usage of the
application.
Deprecate the old configuration but use its value as a default (for now)
for the new configs. This will need to change when the config is
deleted.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Print information whether a multicast address is properly
joined to a multicast group when print addresses using
"net iface" command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
As the interface type is always Virtual, no need to print it.
Print instead the name of the network interface as it is more
useful to the user.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If the network interface does not enable IPv4, then it is pointless
to print DHCPv4 information when invoking "iface" shell command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The count stack variable is also used when CONFIG_NET_L2_ETHERNET_MGMT is
enabled. Make sure it is available.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Nearly all other code places for k_thread_entry_t also keep
unused params in place to stay compatible with k_thread_entry_t.
Signed-off-by: Florian La Roche <Florian.LaRoche@gmail.com>
Convert various networking subsystem files to use ARRAY_FOR_EACH
macro to make the looping more robust.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The netmask should be tied to the IPv4 address instead of being
global for the network interface.
If there is only one IPv4 address specified to the network interface,
nothing changes from user point of view. But if there are more than
one IPv4 address / network interface, the netmask must be specified
to each address separately.
This means that net_if_ipv4_get_netmask() and net_if_ipv4_set_netmask()
functions should not be used as they only work reliably if there is
only one IPv4 address in the network interface.
The new net_if_ipv4_get_netmask_by_addr() and
net_if_ipv4_set_netmask_by_addr() functions should be used as they make
sure that the netmask is tied to correct IPv4 address in the network
interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
As for adding an ipv6 address, removing one should return the same error
code when the network interface is not found.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's an optional support, and it should not select it by default.
Improving information message in case such support is disabled.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The "net sockets" command did not print network management
socket information properly but claimed that the socket
was IPv4 one which it is not.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
It is possible that the `sh` was not set before use.
This change adds a NULL check for `sh` in the following macros:
PR, PR_SHELL, PR_ERROR, PR_INFO, and PR_WARNING.
In case `sh` is NULL, the above macros will call `printk` instead.
Fixes#68793
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
