Clean up if the mount command fails, such as due to a typo in the mount
point name, so that it can be retried.
Signed-off-by: Phil Hindman <phindman@xes-inc.com>
In a uniprocessor system, _sched_spinlock may not need to be
held in all the same cases that it does in a multiprocessor
system. Removing those unnecessary usages can lead to better
performance on UP systems. In the case of uncontested taking
and giving of a semaphore, this can be as much as a +14%
performance gain.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Inlining z_unpend_first_thread() has been observed to give a
+8% and +16% performance boost to the thread_metric benchmark's
message processing and synchronization tests respectively.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Re-orders the checks in should_preempt() tests so that the
z_is_thread_timeout_active() check is done last.
This change has been observed to give a +7% performance boost on
the thread_metric benchmark's preemptive scheduling test.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Silabs maintainer patterns did not match drivers that have the
vendor prefix before the driver name, e.g. gecko_burtc_timer.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
The buffer pointer provided to the dynamic handler should be verified
after checking the transaction status. In case upload was aborted and
underlying connection closed, the callback will get
HTTP_SERVER_DATA_ABORTED status w/o a pointer to any data.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Due to the (potentially) hard to understand effects of blobs, it seems
prudent to make their presence more noticeable.
With this change, whenever blobs are present in the Zephyr work space,
the hello world sample output looks like this:
> *** Booting Zephyr OS build (tainted) v3.7.0-4569-gd4f8765ef20e ***
> Hello World! esp32c3_devkitm/esp32c3
Before, it looked like this:
> *** Booting Zephyr OS build v3.7.0-4568-g69c47471d187 ***
> Hello World! esp32c3_devkitm/esp32c3
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Due to the (potentially) hard to understand effects of blobs, it seems
prudent to make their presence more noticeable.
Hopefully, this will make it easier to identify issues (such as those
reported on GitHub) that have been observed on devices running a tainted
build.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
While not visible in the rendered documentation, double spaces look bad
when reading plaintext file.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This commit enables PMP on 64-bit SoCs from the SiFive Freedom SoC series
by default.
This change is needed to e.g. run the Userspace Hello World demo.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Change the callback context to the dev pointer instead of the data
pointer, as the dev pointer is needed by RTIO.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Added a new driver to support SPI communication via EUSART. Since the
Silabs EFR32MG24 family SoCs have only one USART, EUSART support is
necessary for implementing SPI functionality.
Signed-off-by: Teresa Zepeda Ventura <teresa.zvent@gmail.com>
- boards: renesas: Add support for agt.
- drivers: counter: Add support for counter driver use agt
- dts: arm: Add support for agt.
- dts: bindings: Add support for agt counter driver.
- soc: renesas: Add support for agt counter driver.
- samples: drivers: counter: alarm: Add support for RA8
This is initial support with only basic functionality for counter
operation on Zephyr using AGT hardware, current support for
count source is limited to LOCO and PCLKB, other count source
like underflow signal external pin or AGTIO from another AGT
channel will be added in later support
Signed-off-by: Ha Nguyen <ha.nguyen.fz@bp.renesas.com>
Signed-off-by: Thao Luong <thao.luong.uw@renesas.com>
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
support the configurations which apply for LVDS pads
+ termination resistor
+ current reference control
+ rx current boost
Signed-off-by: Tu Nguyen Van <tu.nguyenvan@nxp.com>
Configures pins for the SPI instance attached to the Arduino connector
to enable using this board with the eval_adxl372_ardz shield.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Configures pins for the GPIOs attached to the Arduino connector to
enable using this board with the eval_adxl372_ardz shield.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Adds a new shield definition for the Analog Devices EVAL-ADXL372-ARDZ
accelerometer shield. This shield provides support for an ADI ADXL372
3-axis accelerometer over an Arduino SPI connector.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
IMXRT1062 bootrom reads boothdr initial vector table
from 0x60001000. In the CMAKE scatter linker scripts we put multiple
sections at offset 0x1000 in the rom. In linkers other than LD, we are
not guaranteed a particular order when placing these.
If we specify FIRST we can count on the .ivt coming first. The other
positions aren't as crucial.
From IMXRT1060RM.pdf 9.7.1
> The location of the IVT is the only fixed requirement by the ROM.
> The remainder or the image memory map is flexible and
> is determined by the contents of the IVT.
Signed-off-by: Robin Kastberg <robin.kastberg@iar.com>
This commit increases the range of value for the
OPENTHREAD_CLI_MAX_LINE_LENGTH option to the maximum allowed.
The previous range may have been insufficient for Openthread vendor CLI
commands.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Use EXTRA_CONF_FILE in documentation .rst/.md files,
that replaced deprecated OVERLAY_CONFIG since the Zephyr v3.4 release.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
.conf files added to enable INPUT_ESP32_TOUCH_SENSOR during sample build.
The absence of these files incorrectly prevented the input_dump sample
build from failing due to missing required hal files.
Signed-off-by: Marcio Ribeiro <marcio.ribeiro@espressif.com>
The production version of the nRF54L15 SoC is now available, so remove
the initial Engineering A (EngA) preview version.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
A bunch of copy-paste mistakes when adding the nRF54L15 DK added stale
references to the Preview DK (PDK).
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
RFU bits has to be ignored according to the spec; In addition,
some MediaTek devices seems to have it set (by mistake I assume),
so having the check means we cannot sync to these devices
Signed-off-by: Troels Nilsson <trnn@demant.com>
Adding a brief fly-in of the main concepts of the
implementation of link layer control procedures handling
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Currently, the camera fixture test can only tell whether data are dumped
onto memory. This is to check further if the image content is correct.
The algorithm is rather simple: compare the average color of each bar
of a generated pattern with a predefined target in CIELAB76 color
space (which is nearly perceptually uniform).
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
The logs that the fixture test are based on are not printed anymore due
to recent changes from "printk" to "LOG_DBG". Change the log level so
that it can work again.
Remove "Capture started" as it is not a relevant test regex. Logs are
sometimes not correctly printed in the console, for example, we can see:
DEBUG - DEVICE: muart:~$ [mapture started
As "Capture started" is a one-time log, fixture test will then fail due
to timeout.
Also, consolidate other regex.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
