Enabled the MRT at the board level for
mcxn947. Enabled the clocking for the MRT
in the clock control.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
To check if DVFS can be used, the CONFIG_NRFS_DVFS_LOCAL_DOMAIN symbol
needs to be used, not CONFIG_NRFS_HAS_DVFS_SERVICE which only indicates
that DVFS is technically possible, not that its local domain part is
actually included in the build.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This is a follow-up to commit 7a2ce2882a.
Do not enable clock control by default on nRF54H Series SoCs when
the system timer is present, because clock control is not needed
for this purpose there.
Add missing `default y` in the CLOCK_CONTROL_NRF2 Kconfig option that
enables compilation of clock control drivers for nRF54H Series.
This way modules that actually require clock control (like drivers
that use radio) will be able to enable it using the generic option
(CLOCK_CONTROL), not the above one that is specific for nRF54H.
Update accordingly applications that referenced the CLOCK_CONTROL_NRF2
option.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The Drivers using Pinctrl should be turning Pinctrl on
this should not be the responsibility of the board. This
commit removes CONFIG_PINCTRL from the boards side for nxp boards.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
STM32C0 have a different prescaler for SYSCLK and for HCLK.
Updates the clock driver to use the appropriate prescaler for each series.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Fixes garbage characters on mcuboot by adjusting UART baudrate
during boot phase according to clock source.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Adding the macros `RA_CGC_CLK_SRC` and `RA_CGC_CLK_DIV` that derive
the BSP clock settings from the DeviceTree node settings.
I also define some aliases to fill in the gaps with the BSP
naming conventions.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
This will calibrate the HSI's PLLX clocks if enabled
The value rcc_hsicalibartion_default is 0x40U for h7/h7rs.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Deprecate support for configuring the MCO source and prescaler from
Kconfig configurations.
This is now done by devicetree and an MCO driver instead, which also
configures the pin to be used by the MCO peripheral.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
Add device driver for STM32 MCO peripheral which takes configures
the MCO clock source and prescaler, and outputs it on one of the GPIO
pins.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
Add clock sources PLL2CLK, PLL3CLK and EXT_HSE.
Needed to check that these clocks are enabled in MCO code.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
remove check for system clock frequency in clock_stm32_ll_h7 because of
addition of fracn (difficult to handle)
Signed-off-by: Nathan Olff <nathan@kickmaker.net>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Remove all entries that as not being used.
This also update hal to re-enable warning flags
as such as -Wno-unused-variable.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Use generic hook infrastrucutre instead of custom Kconfig and hooks for
ARM.
Replace z_arm_platform_init() with platform_reset().
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rather setting the driver default in soc, make it directly at symbol
level rather than soc and clean up redundant `select` occurrences.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Add custom clock_control API for nRF platforms that allows requesting
clocks with specified minimal required attributes (accuracy, precision,
and frequency). Provide an implementation of this API for FLL16M, HFXO,
HSFLL, and LFCLK controllers in the nRF54H20 SoC.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
When omitting the clk_src definition in a child node of a pclkblock,
it uses the source of the parent node.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Allows MSTP register addresses to be changed in the device tree
to support different configuration SoCs.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
This serves two main purposes:
- change the CPU clock via devicetree nodes
- provide the APB frequency to device drivers via the clock driver
interface
Theoretically this could also support choosing between the available
clock sources, but right now we only support LPOSC0 going into PLL0,
going into AHB.
Turning the PLL back off is also not supported since the only current
use case is to set the PLL frequency, turn it on, and switch the AHB
over to it.
Signed-off-by: Michael Zimmermann <michael.zimmermann@grandcentrix.net>
Reuse the file clock_stm32g0.c for the STM32U0 and
rename it to clock_stm32g0_u0.c
because the G0 and U0 series share the same clock control.
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
Move all dependencies of the family config to series level,
and put a disclaimer saying not to use the family config.
Change all occurrences of the family config in code to the
MCXNX4X series config.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This includes:
1) Source containing helper functions, each
implementing a command from the clock management
protocol.
2) A clock controller driver making use of said
helper functions and implementing the clock
subsystem API.
3) A DT binding for clock protocol node.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Add support for the stm32h755 which is a close relative of
the stm32h745 with additional cryptography and hashing
peripherals.
Signed-off-by: Mike Banducci <michael.banducci@sandc.com>
Background of this modification is to make clock control
driver code provided by Renesas vendor to support for Renesas MCU
on Zephyr.
Signed-off-by: Quy Tran <quy.tran.pz@renesas.com>
Clock is disabled at startup for LP core peripherals, greatly
improving power consumption in deep sleep mode.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
