Reduce the size of the ble notification if the length of
the line output is less than the current mtu size.
Signed-off-by: Victor Chavez <vchavezb@protonmail.com>
Macros for registering TCP and UDP services accept a port as a number,
not a pointer. Also added missing parameter to UDP service macro, and
missing type of bar_txt
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
The MQTT publisher/subscriber/pubsub tests suites are currently
depending on an external MQTT broker being available. In result, the
test suites cannot be executed in twister and need to be run manually,
which makes them kind of pointless from the CI perspective.
This commit reworks the tests, so that they no longer rely on an
external broker being available, but rather implement minimalistic
broker functionality for test purposes only. This will make the tests
self contained, and thus executable in the CI.
Since it makes not point to duplicate the effort between the test
suites, the test suites have been merged into a single mqtt_client test
suite.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently existing tests suites verify MQTT 3.1.1 functionality,
therefore group them together under "mqtt/v3_1_1" directory, so
that the test base can be extended easily in the future with MQTT 5.0
tests without collision.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Up till now the size of net buffer chunk was set to only 64B. This
approach was acceptable for IPv4 support as all headers would fit into
64B of allocated continuous memory.
With enabled support for IPv6 one would observe following errors when
Neighbor Discovery [ND] is performed:
net_pkt: Uncontiguous data cannot be linearized
net_ipv6_nd: DROP: NULL NA header
net_icmpv6: ICMPv6 handling failure (-5)
As some IPv6 headers span on multiple 64B net_pkt buffer instances.
To fix this error - the received chunks are stored to large enough single
net_pkt buffer fragment.
Signed-off-by: Stefan Bigler <linux@bigler.io>
Signed-off-by: Lukasz Majewski <lukma@denx.de>
To change mac or enable/disable promiscous mode transmit/receive does not
need to be disabled.
Disabling and enabling again leads to not transmitting anything afterwards.
Signed-off-by: Stefan Bigler <linux@bigler.io>
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Up till now the configuration of LAN865x was NOT allowing any
multicast frames to be received.
However, those are required for correct handling of IPv6's Neighbor
Discovery [ND] protocol.
This patch - by setting all bits in hash enable register - allows
all muticast MAC addresses to be recived.
Of course - more granular approach to specify set of addresses to
be allowed would be better and will be added in the future.
Signed-off-by: Stefan Bigler <linux@bigler.io>
[Cleanup + modified comment]
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Add extra information regarding the case when ZAREFE (0b01) combination
is set for RFA in OA_CONFIG0 register.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Enhancing code consistency provides cognitive leverage with
the following changes:
- Unified the order of declaration for `opt`, `opt_index`,
`state`, and `long_options`.
- Unified the wrapping of `getopt_long` calls, regardless of
the length of the `options` string.
- Renamed `option_index` to `opt_index` for consistency.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Using `getopt_state` to access `optarg` and also `optopt` offers
a better alternative to direct global access.
See e145eb9201 for the previous change related to this.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This change marks the remaining instance of the `struct option` as
`static const`.
The rationale is that `struct option` is a read-only variable.
By using `static const`, we ensure immutability, leading to usage of only
the `.rodata` section and a reduction in the `.data` area.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Various manual code formatting adjustments, including:
- Wrapping lines in the `long_options` declaration to prevent them
from extending too far to the right.
- Adding missing `{` and `}` in the `if` statement in
`cmd_wifi_set_rts_threshold`.
- Aligning `SHELL_CMD_ARG` in `wifi_commands` with previous declarations.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Introduces a haptics API for use with LRA driver ICs to
create haptic feedback events.
Signed-off-by: Ricardo Rivera-Matos <ricardo.rivera-matos@cirrus.com>
The power_down() function will lock dcache for the hpsram_mask
array. On some platforms, the dcache lock will fail if the array
is on cache line that can be used for window register context
saves.
Work around this by aligning and padding the hpsram_mask to cacheline
size.
Link: https://github.com/thesofproject/sof/issues/9268
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
SenML is technically a JSON based format which can
be encoded as a CBOR. SenML-CBOR specification in
RFC 8428 section 6 states that numbers can be decoded
as an integer.
Also RFC 7049 section 4.2 states that JSON numbers
without fractional part can be decoded as an integer.
I have seen with one commercial LwM2M platform that
the decoder they use, sends floating point values as
integers, if there is no fractional part.
So LwM2M engine cannot assume from the path that
the incomming number is either float or int. Accept both.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Introduce a Kconfig option to signal whether a HW info driver is
available when HWINFO is enabled.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
This commit moves reading nexthop's LL address only if it's supported
by a given neighbor and can be used for routing between interfaces.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
Use the new `SPI_MOSI_OVERRUN_DT` macro to determine at compile-time
whether the 512 byte array of `sdhc_ones` is required.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Expose the new common property `overrun-character` from the devicetree
nodes, falling back to the `SPI_MOSI_OVERRUN_UNKNOWN` value.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Move the `overrun-character` property from the common Nordic SPI
binding to the `spi-controller` base binding. This gives users of the
SPI interface a way to query what the default value is at compile-time,
and potentially avoid allocation of large constant buffers.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Remove address-of operator ('&') when assigning `init_fn`
function pointer in `DEVICE_DT_INST_DEFINE` macro.
This change aims to maintain consistency among the drivers in
`drivers/spi`, ensuring that all function pointer assignments
follow the same pattern.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add spi configurations of NXP frdm_ke17z and frdm_ke17z512 boards,
tested spi_loopback sample for lpspi drivers.
Update the "HAS_MCUX_*" kconfig to "DT_HAS_*" in testcase.yaml
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
After flashed EC image, we needed to manually press the reset button
on it8xxx2_evb. Now, without pressing the button, we can disable
debug mode and trigger a watchdog hard reset for running tests.
After flash EC, running below tests can pass (without pressing the button):
west build -p always -b it8xxx2_evb tests/drivers/watchdog/wdt_basic_api
west build -p always -b it8xxx2_evb tests/kernel/timer/timer_api
west build -p always -b it8xxx2_evb tests/kernel/fatal/exception
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Signed-off-by: Ruibin Chang <Ruibin.Chang@ite.com.tw>
Don't push the TS flag on `buf` itself.
This messes up the MTU calculations: a packet that would exactly fit the
MTU and has a timestamp would be unnecessarily fragmented.
The MTU check is done on `buf` as a whole. At the point where the
fragmentation length is decided, `buf` includes one extra byte to pass the
TS bit around. That byte shouldn't count towards the MTU.
Instead, infer the presence of the timestamp by inspecting the amount of
headroom that the buffer has. This works because we always reserve
enough memory to push the timestamp, but not always push a timestamp on
the buffer. #tightlycoupled
This method is slightly uglier IMO, but eases MTU confusion and doesn't
rely on user_data.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This overlay is no longer needed, as presently there are more test
scenarios covering all combinations of DMA and SPY_ASYNC support for
LPSPI peripheral.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Update manifest to pull fixes for mr_canhubk3 DMA driver.
Fixes#76708
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Signed-off-by: Manuel Argüelles <marguelles.dev@gmail.com>
Add MAX32662EVKIT board files
For more information about this board please check
https://www.analog.com/
Co-authored-by: Maureen Helm <maureen.helm@analog.com>
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Allow to run with timer random generator which does not need any
entropy device.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
