Starting with commit b9b43a0eb772a464bba13833d11e3a31fbf4e09e, printk()
messages are handled by the logging subsystem. This can cause trouble
in watchdog related samples if the deferred logging mode is used (and
currently it is by default), because those samples are ended by a reset
and some messages may not get a chance to be outputted.
Since the same problem concerns also the ordinary logging messages that
may be produced during execution of the samples, this commit fixes it
by switching to the immediate logging mode, not by just disabling the
LOG_PRINTK option.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Enable the openamp sample for RT1160EVK. CM4 core has a custom DTS
overlay to use LPUART2 for console information, and use a secondary GPT
timer for the system tick.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enable the openamp sample for RT1170EVK. CM4 core has a custom DTS
overlay to use LPUART2 for console information, and use a secondary GPT
timer for the system tick.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add support for setting the help description for each entry in a dictionary
command. Currently the syntax string alone may not provide sufficient
description of its entry. This commit also helps keep the help messages
consistent with existing style.
Signed-off-by: Xinyang Tan <xinyang.tan@delve.com>
Commit ff3aaa6ef3 moved some getopt
declarations to unistd.h. Update sample to include the header, so that
we can access optarg.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add deep sleep sample code with support for the
following wake-up sources:
- Timer
- EXT0/EXT1: IO under RTC domain
- GPIO (ESP32-C3 only)
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
Added configuration which allows to test the sample using SPI_NOR
driver instead of NRF_QSPI driver.
SPI_NOR driver is generic, so nice to add possibility to check
how it is working.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Declarations for `getopt()` should be in `<unistd.h>`
according to the spec. The extended versions `getopt_long()`
and `getopt_long_only()` are declared in `<getopt.h>`.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Generates XML file containing VIF policies by reading the device tree
using EDT.pickle generated during build
This script writes a subset of general and sink-pdo VIF policies in
output file
This script gets invoked during build if enabled through kconfig
The generated XML containing USB-C VIF policies could be used by
USB PD/Type-C analysers/testers to understand USB-C properties and
perform tests accordingly
Signed-off-by: Madhurima Paruchuri <mparuchuri@google.com>
Add a sample program demonstrating the LED driver for Microchip's
XEC microcontrollers. The sample can be built for MEC152x and
MEC172x.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
This seems to have caused build failures in spite of CI being
green in PR 52653.
This reverts commit fc92eb1b37.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Declarations for `getopt()` should be in `<unistd.h>`
according to the spec. The extended versions `getopt_long()`
and `getopt_long_only()` are declared in `<getopt.h>`.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
log_backend_activate() does not assign the backend id (backend->ctx->id),
which is required for runtime filtering.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Adds support for building the external_lib sample application on a
windows host operating system.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Remove regulator-fixed-sync specialization, create a single driver that
is always synchronous. The asynchronous part is rarely/never used, so
let's keep things simple for now.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Enable counter alarm sample on s32z270dc2_r52 boards, using the first
System Timer Module instance.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
integration_platforms help us control what get built/executed in CI and
for each PR submitted. They do not filter out platforms, instead they
just minimize the amount of builds/testing for a particular
tests/sample.
Tests still run on all supported platforms when not in integration mode.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds the support jedec configuration to run
the jedec sample application. So target boards can display
the content of the octo-NOR flash
of the stm32u585 and stm32l562 or stm32h735 disco boards.
The sfdp-bfp table is provided as example (overlay file),
to run this sample on the stm32l562e_dk platform.
It has to be defined in the deviceTree "in cases were runtime
retrieval of SFDP data is not desired."
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Remove the struct bt_vcp pointer from the volume
renderer API, as there is only ever a single
Volume Renderer instance on a device.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Split the `bt_vcp_cb` struct into separate structure for
the volume controller and the volume renderer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The VCP server, known as the volume renderer, has a
more explicity bt_vcp_vol_rend API naming scheme now.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Renames almost all occurences of VCS to VCP, as we want to
use the profile as the namespace for volume control.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename vcs.h to vcp.h to better detail what the
file contains, as it is more than just VCS. This also
renames the Kconfig file.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Imcrease the supported number of subgroups to 2 as well as the number of
streams to 2, so that it matches the default configuration of the
broadcast audio source sample.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The `bluetooth/common/log.h` and `bluetooth/common/log.c` files have been
removed. Files that were using them have been updated to use
`zephyr/logging/log.h` instead.
Those replacement have been done consequently:
- `/BT_DBG/LOG_DBG/`
- `/BT_ERR/LOG_ERR/`
- `/BT_WARN/LOG_WRN/`
- `/BT_INFO/LOG_INF/`
- `/BT_HEXDUMP_DBG/LOG_HEXDUMP_DBG/`
- `/BT_DBG_OBJ_ID/LOG_DBG_OBJ_ID/`
Also, some files were relying on the `common/log.h` include to include
`zephyr/bluetooth/hci.h`, in those cases the include of `hci.h` has
been added.
For files that were including `common/log.h` but not using any logs,
the include has been removed and not replaced.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
This test used to only run on native_posix due to the test filter until
e478a4e850 was merged. Now it's running on all platforms but it's failing
on qemu_leon3 for some address alignment issue.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The sample depends on the log output to check for a successful run. This
means that with a small enough log buffer we could lose messages and
fail the run, as it's happening right now on qemu_cortex_m0.
Switching to CONFIG_LOG_MODE_MINIMAL to avoid the problem in the first
place.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Use the service instance struct instead of the more generic
`bt_csip` for the CSIP set member API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Renamed remaining structs and functions that are not
for the set coordinator to use the set member CSIP
role name.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Renamed the coordinated set implementation to use the
profile (CSIP) name instead of the service (CSIS) name, as
the former is more general.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Increase the time between resets from 30s to 120s.
This make it easier to properly use, while still get
the chance to test the stop functionality.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Updates the broadcast source API to create subgroups and
to set BIS specific codec configuration
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Moving the SDFP table property from the sample to the device tree
of the stm32l562e_dk disco kit.
The MX52lm51245 Nor octoflash mounted on this boarddoes not
provide its own internal SFDP parameters.
With this patch, the SFDP table is given by the board DTS.
So that the stm32 ospi driver can initialized the NOR octoflash
correctly with the parameter from that property instead of
relying on the nor octoflash.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Currently there is inconsistency in repository file names, APIs, Kconfig
options and documentation around file / file-system backend for settings
storage, as both "file" and "FS (file system)" are used. As an example,
there is `CONFIG_SETTINGS_FS` Kconfig option, but the file that implements
this settings backend is called `settings_file.c`. Another example are
names of static functions that implement settings storage API:
`settings_file_load()`, `settings_file_save()` and
`settings_fs_storage_get()`.
This backend is actually storing all settings in a single file, so it makes
sense to use "File" as the name of backend, instead of a more general
"FS" (which would make sense if several files would be used to store
settings).
Fix inconsistency in used wording in the tree and unify it to "settings
file backend". This naming is more precise to how the implementation looks.
It will also make it easier to grep through the codebase and analyze
existing code.
Deprecate settings_mount_fs_backend() function and all Kconfig options
starting with `CONFIG_SETTINGS_FS`.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
On targets where POST_KERNEL initialization routines, executed after
the logging thread has started, take significant amount of time,
log messages produced during CHRE initialization may collide with
printk messages output by the sample. Prevent this by flushing all
log messages right after the initialization is performed.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add CONFIG_CRC for building CRC related routines.
CRC routines are now being built for each application, whether used or
not and are add in the build system unconditionally.
Keep CONFIG_CRC enabled by default for now and until all users have
converted to use the new option.
Partial fix for #50654
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds the support jedec configuration to run
the jedec sample application. So target boards can display
the content of the octo-NOR flash
of the stm32u585 and stm32l562 or stm32h735 disco boards.
The sfdp-bfp table is provided as example (overlay file),
to run this sample on the stm32l562e_dk platform.
It has to be defined in the deviceTree "in cases were runtime
retrieval of SFDP data is not desired."
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Adds the dma transfer for the octoSPI on NOR octo Flash
of the b_u585i_iot02a disco kit.
The channel for the GPDMA is 0-15 (0-7 for DMA1, 8-15 for DMA2)
The channel 12 to 15 are used for GPDMA transfers
to/from external memories.
The request is 41 for the OCTOSPI2.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Remove Kconfig file samples/subsys/usb/usb_pid.Kconfig added in
the commit e5cbe6a9e7 ("usb: cdc: Add unique PIDs for each sample")
with the motivation to have a separate ID for each sample supposedly
to be recognizable by the host.
The new USB support does not use the options, VID/PID is set
directly in the application. As a note, it is not necessary to have
unique PID for each sample, especially for the well known USB classes.
Replace the individual Kconfig options in the documentation
by a table with the references to the samples and PIDs.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
