Parse common section and append to cmake args if available when using
--test-item option of west build.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently priv_stacks_noinit is being put onto the flash waiting
to be copied into memory at boot. This is a waste of flash space
as priviledge stacks are initialized at runtime. So mark
the linker section as NOLOAD to save some flash space.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
xt-clang likes to remove any consecutive NOPs more than 8. So
we need to force the function to have no optimization to avoid
this behavior and to retain all those NOPs.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Without this, test is run on any target, even if no RTC driver is
supported, leading to unexpected issues.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
STM32F1 series RTC is not compatible with other STM32F1 series,
and it uses a different LL API.
Current implementation of the driver doesn't take this into account,
so we need to explicitly exclude STM32F1 series support until
some changes are made.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Added dts additions for stm32f105xb cpu which is the same as existing
stm32f105xc with less flash.
Signed-off-by: Mathieu Anquetin <mathieu.anquetin@groupe-cahors.com>
Disable peripherals that are not used by default.
Updated the documentation to reflect changes on configured pins, also
fixed the References section wich had none listed.
Signed-off-by: Josep Puigdemont <josep.puigdemont@gmail.com>
Define only once the CRYP_DATATYPE_8B for the stm32h5 serie
This macro is in modules/hal/stm32/stm32cube/stm32h5xx/d
rivers/include/stm32h5xx_hal_cryp.h
Signed-off-by: Francois Ramu <francois.ramu@st.com>
- Add overlay for the esp32s2_saola board to die_temp_polling sample.
- Add aliases for the die_temp_polling sample to esp32s2 dtsi.
Signed-off-by: Hiroki Tada <tada.hiroki@fujitsu.com>
Previously, only a single type of ADCs was always available
in the ADC shell. This change enables the usage of the ADC
shell for different ADC types at the same time.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
The Keystone 3 (K3) family encompasses a wider variety of SoC's.
This aligns the soc/arm64 naming with the soc/arm directory.
Signed-off-by: Grant Ramsay <gramsay@enphaseenergy.com>
This fixes missing `static` function specifier.
The bt_att_chan_create_pdu is not called outside of att.c.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Updates the handling of incoming seg ack messages to comply with
the mesh protocol specification, section 3.5.3.3.2 and section
3.5.3.3.3.
Previous implementation did not restart the retransmission timer unless
the incoming ack contained at least one segment newly marked as
acknowledged. According to the spec, the timer should be restated
regardless. The implementation depends on the retransmission
timer to end the transmission early if there was no more retransmission
attempts. Checks have been added to ensure that this now happens
immediately.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
This puts a ifdef guard around the inclusion of ACPICA header
file. The ACPICA module is not active unless CONFIG_ACPI is
also enabled so we should not be using that header without
CONFIG_ACPI also being enabled.
This was discovered by Coverity.
Fixes#60484
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a check of the return of clock_control_get_rate(),
and returns error in uart_configure() if unsuccessful in
getting clock rate.
Fixes#60478
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Updates the west manifest to add an LVGL shell with initial memory
statistics and monkey testing support.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Rather than looking at the pool of completions for spinning use an
atomic counter of total completions ever done. The relative number of
completions being waited on by rtio_submit may then always be correctly
done.
Prior to this a race was possible, and understood, as
rtio_cqe_consumable was a likely but not guaranteed count of completions.
Sure enough on an SMP system the likely count was ahead of the actual
available completions and a race was caught by the simple test case.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Interrupt callbacks may want to configure GPIO pins on the port expander,
e.g. to change the polarity of a level interrupt. This would cause a
deadlock because the callback handler would still be holding the lock.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
With SMP, the private_mutex may not be locked fast enough by
thread_12 after the thread creation as it might take longer
for a thread to start running the entry function, resulting
in test failure when the main test thread goes into locking
it again. So give it a bit more delay after thread creation
so thread_12 has a chance to lock the private_mutex.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If CONFIG_SMP_TEST_RUN_FACTOR is zero, the switch torture test
is effectively not doing anything as the k_sleep() below is not
going to sleep at all, and all created threads are being
terminated (almost) immediately after creation. So if run
factor is zero, mark the test as skipped.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the CONFIG_UART_USE_RUNTIME_CONFIGURE guard to
disable the API function pointers if the kconfig is not enabled.
Both .configure and .config_get should only be usable if runtime
(re-)configuration of UART is needed.
Ifdef guards are added to drivers previously lacking this guard.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Support for the following platforms is provided with this commit:
- mimxrt595
- mimxrt1060
- mimxrt1064
- lpc55s69.
Support for more boards will be added with future PR's
Notes:
- the debug firmware of the board must be CMSIS-DAP/LPC-Link (latest
revision). If your board is running the jlink firmware, linkserver
fails to connect to the board
- probes can be listed by running:
$ LinkServer probes
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
Linkserver is a utility for launching and managing GDB servers for NXP
debug probes, which also provides a command-line target flash programming
capabilities. Linkserver can be used with NXP MCUXpresso for Visual Studio
Code.
For more information about LinkServer, please visit the LinkServer web
page (link [1] below).
This commit adds a runner to west, supporting debug and flash commands.
Documentation is also added.
[1] - LinkServer web page:
https://www.nxp.com/design/software/development-software/mcuxpresso-software-and-tools-/linkserver-for-microcontrollers:LINKERSERVER
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
Update trusted-firmware-m to 1.8.0, mbedtls to 3.4.0, and tf-m-tests to
1.8.0. Includes minor cmake changes due to file renames and such, as well
as adjusting the return type of a callback function that has changed since
the previous version of trusted-firmware-m.
Signed-off-by: David Brown <david.brown@linaro.org>
When building the driver for efr32bg27_brd2602a none of the condition
matches and the compiler warns for:
hwinfo_gecko.c: In function 'z_impl_hwinfo_get_reset_cause':
hwinfo_gecko.c:38:18: warning: unused variable 'rmu_flags'
38 | uint32_t rmu_flags = RMU_ResetCauseGet();
This fails the bi-weekly build, add a __maybe_unused to silence the
warning.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This fix a build issue where ICM42688_DECODER is enabled but
SENSOR_ASYNC_API is not, which results in some structures in an
orphan section:
warning: orphan section
`._sensor_decoder_api.static.invensense_icm42688__decoder_api_' from
`libdrivers__sensor__icm42688.a(icm42688_decoder.c.obj)'
being placed in section
`._sensor_decoder_api.static.invensense_icm42688__decoder_api_'
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
