This fixes the following warning:
> unit address and first address in 'reg' (0x6a) don't match for
> /soc/sercom@42001800/atecc608a@15
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This fixes the following warning:
> unit address and first address in 'reg' (0x1000) don't match for
> /soc/spi@40003800/spi_nor@0/partitions/partition@10000
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Introduce GPIO-based driver for MIPI DBI class that allows MIPI DBI
type A and B displays to be used on general platforms.
Since each data pin GPIO can be selected individually, the bus pins are
set in a loop, which has a significant negative impact on performance.
When using 8-bit mode and all the data GPIO pins are on the same port,
a look-up table is generated to set the whole port at once as a
performance optimization. This creates a ROM overhead of about 1 kiB.
Tested 8-bit 8080 mode with ILI9486 display on nRF52840-DK board.
Signed-off-by: Stefan Gloor <code@stefan-gloor.ch>
The MIPI DBI API supports MIPI DBI controllers type A, B, and C
(except with 16 write clocks). Update the documentation accordingly.
Signed-off-by: Stefan Gloor <code@stefan-gloor.ch>
Instead of always using the SPI MIPI DBI mode (type C), look up the
mipi-mode from the device tree and only set the mode to
MIPI_DBI_MODE_SPI_4WIRE as a fallback in case the property is not given.
Signed-off-by: Stefan Gloor <code@stefan-gloor.ch>
Currently the RAM allocated for the bootloader is not
enough to use MCUBoot with crypto signatures.
This commit bumps the #defines accordingly to fix
compile errors with ecdsa_p256 and RSA.
Signed-off-by: Brandon Allen <brandon.allen@exacttechnology.com>
The Linux binding DO's and DONT's about designing DT bindings
pretty much all apply to Zephyr as well, and a lot of these issues
come up in reviews in Zephyr, which is the reason that Linux has
this page in the first place, to list common binding review topics.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Fixed mcuboot slots, needed after MCUBoot added the default
auto calculation max sectors (CONFIG_BOOT_MAX_IMG_SECTORS_AUTO).
Fixed a possible firmware update error.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
This commit removes the y-selection of the `CONFIG_PINCTRL` Kconfig option
in FE310-based boards defconfig files.
It also makes drivers used in FE310 y-select `CONFIG_PINCTRL` if pinmuxing
is needed.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Infom users about Kconfig options deprecation, and provide code snippets
on what they have to do now.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Devicetree should be used instead. Example DT snippets are provided to
ease with the transition.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
- Only one board tweaked the HFXO configuration (bl5340_dvk)
- LFXO configuration has been added to all boards based on the current
Kconfig defaults: use LFXO with internal 7pF capacitor.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
HFXO is represented as a child of the oscillators node. A new node is
created because it requires its own properties (see the binding for more
details).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
LFXO is represented as a child of the oscillators node. A new node is
created because it requires its own properties (see the binding for more
details).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
- Create a new compatible: nordic,nrf53x-oscillators, as other series,
e.g. nRF54LX contain a similar but different IP (with PLL control,
etc.)
- Adjust DT: use recommended node name, remove redundant status okay.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
For add_interface(), only add STA interface when hostapd enabled,
and the Soft-AP interface will be added in zephyr_hostapd_init().
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
bt_aics_client_free_instance_get can be called from multiple threads
and as such the atomic_test_and_set_bit should be used instead
of a atomic_test_bit followed by a atomic_set_bit.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
