This commit disables the half-precision floating-point (FP16) tests for
the POSIX arch, because the `__fp16` type is not supported on the x86
host, which is the most common host type for the POSIX arch.
Note that the FP16 tests can technically run on the POSIX arch if the
host type is AArch64; but, since we do not have a proper configuration
scheme to resolve the host type for the POSIX arch at this time, we
simply disable these tests completely for the POSIX arch.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit disables the half-precision floating-point (FP16) tests for
the POSIX arch, because the `__fp16` type is not supported on the x86
host, which is the most common host type for the POSIX arch.
Note that the FP16 tests can technically run on the POSIX arch if the
host type is AArch64; but, since we do not have a proper configuration
scheme to resolve the host type for the POSIX arch at this time, we
simply disable these tests completely for the POSIX arch.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
TCP processed IPv4/IPv6 packets w/o verifying first if IPv4/IPv6 is
enabled in the system. This could lead to problems especially for IPv6,
where in case it's disabled the sockaddr structure is not large enough
to accomodate IPv6 address, leading to possible out-of-bound access on
the sockaddr structure.
Fix this by adding appropriate checks where applicable.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add protection if number of string arguments exceed the limit
which currently is set to 32.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Create wrapper for printk to avoid including printk.h in __assert.h.
__assert.h is used everywhere thus should not have dependency to
printk.h.
Cleanup assert Kconfig options.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
- Move SWJ_CFG initialization into pinmux.
- Don't disable the AFIO clock after SWJ_CFG
initialization.
- Apply '111' to the SWJ_CFG bits upon remap
application, that fixes the remap usage.
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
- Move SWJ_CFG initialization into pinctrl.
- Don't disable the AFIO clock after SWJ_CFG
initialization.
- Apply '111' to the SWJ_CFG bits upon remap
application, that fixes the remap usage.
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
Adds 'swj-cfg' property to the F1 pinctrl. It is an optional
property that allows to control Serial Wire JTAG
configuration.
Different configurations allow to free certain IO
pins that can be used in remap or standalone.
That replaces previously used Kconfig approach.
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
The Serial Wire JTAG configuration is moved to
F1 pinctrl DTS.
The configuration in GPIO didn't apply to the
majority of the STM MCUs except F1.
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
Added support for Composite observation for LwM2M v1.1.
Updated current Observation node to support linked path list.
Rename typos lwm_ to lwm2m_.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Removed to store pmin and pmax at oberservation node structure and
use attribute list store for calculate time for next Notification.
Observation class use timestamp for triggering notification based on
resource update which use pmin and default pmax behaviour.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
There are no more context defines specific to metadata, the ones
coming from Assigned Numbers shall be used.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The location of `fs.h` was wrongly specified as `include/fs.h`
resulting in a broken link.
Update the location to `include/fs/fs.h` which is the correct location.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
When using `zephyr-app-command` the CMake arguments and values are not
having spaces between them, except the `-B build`.
Remove the space, so that `-B build` becomes `-Bbuild` and thus looks
similar to other `-<arg><value>` occurences.
Example before this commit:
> Use cmake to configure a Ninja-based buildsystem:
> cmake -B build -GNinja -DBOARD=reel_board samples/hello_world
>
> Now run ninja on the generated build system:
> ninja -C build
With this commit:
> Use cmake to configure a Ninja-based buildsystem:
> cmake -Bbuild -GNinja -DBOARD=reel_board samples/hello_world
>
> Now run ninja on the generated build system:
> ninja -Cbuild
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fix hwinfo documentation claiming API returns ENOTSUP for
unimplemented functions, with the correct ENOSYS
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Support function and data lookup in the RPi's ROM.
The objects are obtained by including <pico/bootrom.h> and calling
rom_func_lookup or rom_data_lookup.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Add a compiler property for disabling pointer arithmetic warnings,
and implement that property for GCC.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Use the Kconfig macros of MODEM_GSM_RX_STACK_SIZE and
MODEM_GSM_WORKQ_STACK_SIZE directly without another macros.
They are well within the column limit and this make them
more obvious that they are actually configurable by Kconfig.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
The driver should check for cellular registration before
attempting to attach to packet service, otherwise it will just
fails.
This patch waits for registration for 300 seconds, configurable
by CONFIG_MODEM_GSM_REGISTER_TIMEOUT, if it isn't registered by
then, it would toggle the airplane mode using AT+CFUN & wait
again, until it is registered, or `gsm_ppp_stop` is invoked.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Back with commit a1b77fd589 huge chunk of code was automatically
refactored using a script, which in turn left some macros meaningless
Signed-off-by: Hristo Mitrev <hr.mitrev@gmail.com>
It is not necessary to go through the full exception exit code.
This is simpler, smaller and faster.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Make it optimal without the need for an SVC/exception roundtrip on
every context switch. Performance numbers from tests/benchmarks/sched:
Before:
unpend 85 ready 58 switch 258 pend 231 tot 632 (avg 699)
After:
unpend 85 ready 59 switch 115 pend 138 tot 397 (avg 478)
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
In some circumstances, _thread_idx_map[] is all zero and the linker
decides to put it into BSS instead of DATA section. This results in
kernel objects being pushed away so the hash table is no longer
valid. This forces _thread_idx_map to be in the data section inside
the intermediate object file so it will be placed in the data
section in final binary.
Fixes#43618
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Just use dev->name. This change follow same principles applied when
DEV_CFG and DEV_DATA macros were removed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The Atmel SAM V71 Xplained Ultra development board is equipped with a
Microchip ATA6561 CAN transceiver with a maximum bitrate of 5Mbit/s.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The Keyestudio CAN-BUS Shield (KS0411) is equipped with a Microchip
MCP2551 CAN transceiver with a maximum bitrate of 1Mbit/s.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The DFRobot CAN BUS Shield V2.0 is equipped with a NXP TJA1050 CAN
transceiver with a maximum bitrate of 1Mbit/s.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The NXP TWR-KE18F development board is equipped with a NXP MC33901 CAN
transceiver with a maximum bitrate of 1Mbit/s.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The Atmel SAM E70(B) Xplained development board is equipped with a
Microchip ATA6561 CAN transceiver with a maximum bitrate of 5Mbit/s.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The NXP RDDRONE-FMUK66 development board is equipped with dual NXP
TJA1042 CAN transceivers with a maximum bitrate of 5Mbit/s.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The Renesas R-Car H3ULCB development board is equipped with a TI
TCAN332G CAN transceiver with a maximum bitrate of 5Mbit/s.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The Olimex OLIMEXINO-STM32 development board is equipped with a
Microchip MCP2551 CAN transceiver with a maximum bitrate of 1Mbit/s.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The Olimex STM32-P405 development board is equipped with a TI SN65HVD230
CAN transceiver with a maximum bitrate of 1Mbit/s.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The NXP MIMXRT10xx/11xx EVK boards are equipped with NXP TJA1057 CAN
transceivers with a maximum bitrate of 5Mbit/s.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The NXP LPCXpresso55S16 development board is equipped with a NXP TJA1044
CAN transceiver with a maximum bitrate of 5Mbit/s.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
