Allow the runners to override the default search path, e.g. when
provided through command line. The default is to search for the program
binary on the system PATH.
This is useful when the runner allows to optionally override the search
path of the tool, in the case there are multiple versions or
installations, and not necessarily the tools path are present in the
system PATH environment variable. For example:
`tool = self.require(tool_name, path=args.tool_path_override)`
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
When no heap has been configured, osMessageQueueNew() will no
longer include a call to k_calloc() (which needs the heap).
In such a configuration, if osMessageQueueNew() indicates that
the buffer must be allocated, it will fail and return NULL.
Fixes#61196
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Corrects set_config to allow MAC config
at runtime.
* Add missing device lock
* Use correct mac argument
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
CoAP reply structure user_data should be kept between
ongoing blocks, so that callbacks for LwM2M send continue
to work on blockwise transfers.
Fixes#64290
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Define the CONFIG_STM32_LPTIM_CLOCK_LSE when the board DTS
has STM32_SRC_LSE has lptim clock source.
CONFIG_STM32_LPTIM_CLOCK_LSI is defined by default.
The CONFIG_SYS_CLOCK_TICKS_PER_SEC is set by soc/arm/st_stm32/common/
Kconfig.defconfig.series.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The stm32h735g_disco board support Ethernet but the L2 Ethernet driver
was not being enabled.
The L2 Ethernet driver is now enabled along with Networking.
Signed-off-by: Ben Marsh <ben.marsh@helvar.com>
In driver runtime configuration function, calling
calling pm_device_runtime_get/put() will have the effect of performing
pinctrl change from sleep to default and back from default to sleep
which is useless and in turn enables and disables GPIO clocks two times.
Stop this crazyness and purely enable/disable clock, which might be
superfluous in some cases but which remains much more reasonable than
than the previous implementation.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
pm_device_runtime_enable() will call i2c_stm32_suspend() if
pm_device_init_suspended() isn't called.
Since the aim is to perform suspension, just need to call
pm_device_runtime_enable().
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
During i2c_configure API execution, there is no way core
can go in low power mode. Hence, call to pm_device_busy_set/get API
is useless.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
OpenOCD can now be used to flash and debug nucleo_wba52cg.
However, today, it requires use of recent upstream OpenOCD.
Add instructions on how to proceed.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
M5Stack-Core2 comes with a base shield that is connected to the M5Stack
extention connector. It features a MPU6886 6-axis motion tracker
and a SPM1423 microphone.
Signed-off-by: Martin Kiepfer <m.kiepfer@teleschirm.org>
This commit adds basic support for m5stacks M-Bus extenions port that is
support my core and core2 module.
Signed-off-by: Martin Kiepfer <m.kiepfer@teleschirm.org>
This commit re-implements the SPARC V8 ABI "Flush windows" software
trap. The trap is generated by C++ compilers for exceptions and also by
the C standard library function longjmp().
There were two issues with the previous implementation:
1. It did reads and writes via the stack pointer of the trap window,
which is not defined.
2. It executed with traps enabled but without the processor run-time
state set to safely handle traps. In particular there was no valid
stack for trap processing. Even though interrupt priority was set to
highest level, the behavior at other traps was not deterministic. For
example non-maskable interrupt (15) trap or bus error trap for
instruction fetch.
This new implementation does not store backup copies of CPU registers to
the stack, and it executes with traps disabled.
Fixes#63901
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Before we were defining the buffer in the runner context
which is simpler and less error prone, but it had a hardcoded
size decoupled from DT as it could not be based on DT
information.
Instead, let's allocate the buffer in the application core
image. This allows us to size it based on the device tree
configuration.
Note that this then requires the application core image
to be present during link time of the final executable
when the IPC subsystem is used.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In preparation for RT500 ADSP enablement, consolidate common Xtensa
configuration parameters in top level Kconfig.defconfig.
Signed-off-by: Dmitry Lukyantsev <dmitrylu@google.com>
Ensures correct packing of net idx in Heartbeat Publication Status
messages on the Configuration Server.
Reference to net idx packing format: MshPRTv1.1 section 4.3.1.1
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Fixes incorrect unpacking of Heartbeat Publication status
messages on the Configuration client.
Reference to packing format: MshPRTv1.1 section 4.3.2.63
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Fixes issue where Heartbeat Publication Status message sends
garbage data when destination field is set to the unassigned address.
MshPRTv1.1, section 4.4.1.2.15:
"When the Destination field is set to the unassigned address, the values
of the CountLog, PeriodLog, TTL, and Features fields shall be set to
0x00 and NetKeyIndex field shall be set to 0x0000."
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Updates Bluetooth mesh specification references:
- Change "Profile" to "Protocol" since the main specification has
changed its name.
- Update/align formating of specification references. This will
make it easier to find spec references in the future.
- Change some section references to point to the correct section of the
newest version of the specification (v1.1).
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
All these tests where filtered for the whole POSIX
architecture, but quite a few of them can be run in
native_sim.
So let's filter out native_posix(_64) in general,
(allowing other native simulator based targes),
and filter for thsi arch out explicitly the 2 tests
which need NEWLIB as this arch does not provide it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
These tests cannot be run on the native_posix(_64) targets,
so let's filter them explicitly. Before they were filtered
due to the "filter", but using platform_exclude is faster.
Also the tests that depend on newlib cannot be run
in this architecture at all, so let's filter them by
architecture too.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The timer check does not work properly for platforms
which have a system tick timer with a period that
does not properly divide the configured time interval.
In those, depending on when the timer is started and
stopped, one signal less may be received.
This is for example the case for nrf5x platforms,
where the system tick timer is driven by a 32.768KHz
clock.
=> Correct the test, to accept receiving 1 signal
too little during the wait.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix secure and non-secure images overlapping because of incompatible
flash layout configurations.
Align the board configurations to match the nRF9160 DK default
partition layout.
This enforces that the SPU alignment requirement is satisfied for
the nrf9160 MCU.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Increase the size of the thread stacks used by the obj_core tests
by CONFIG_TEST_EXTRA_STACK_SIZE bytes. This is useful to prevent
stack overflow/corruption when options such such as
"--coverage --gcov-tool gcov"
are applied to twister runs.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Fixes an issue whereby the application init will stall if USB init
failed if it's already been setup, this is likely due to USB CDC
being enabled in which case the failure can be ignored
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
* Select always PICOLIBC. This is anyhow the default for all
but the posix architecture. And for the posix architecture
we need it as POSIX_CLOCK does not work with the host C
library.
* Fix the testcase filtering. This sample works fine
in native_sim (when not using the host libC),
but does not work for native_posix(_64), as those can
only be built with the host libC, and in that case,
the POSIX_CLOCK provided functions will not be properly
linked to.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
POSIX clock cannot be used with the host libC
when building with the POSIX architecture.
Let's ensure it via kconfig.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The sample was at the same time filtered for the whole
posix architecture and had native_posix as its integration platform.
This is selfcontradictory.
In any case, this sample cannot run in native_posix but
can run in native_sim.
So let's fix the filtering.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This sample shows how to use flash_mmap() call to enable custom flash
area to be mapped into data region.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
ESP32 flash_mmap() function requires `_rodata_reserved_start` address
to be at the beginning of RODATA. This allows adding memory-mapped flash
areas.
Fixes#52764
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The initialisation of the device data struct was giving a build error
when using the adi,adin1110 devicetree compatible.
Fixed to allow both adi,adin2111 and adi,adin1110 devices to
be defined.
Signed-off-by: Jason Murphy <jason.murphy@analog.com>
The shell name defined with `SHELL_DEFINE` is implicitly
guaranteed to be unique while it is possible that more than one
shell backends can have the same prompt.
Print the name of the shell backend alongside with its prompt
to differentiate between the backends.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Added some new APIs to get the backend instances more easily,
so that dev does not need to rely on `shell_backend_*_get_ptr`,
which looks more like a hack to access a local variable.
These APIs are basically copied from the log backend
implementation.
Added testcase for the APIs.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
