Add driver for TCN75A temperature sensor. The following features are
supported:
- TCN75A oneshot mode, which allows single shot conversions with lower
power consumtion
- Resolution selection, up to 12 bit resolution (9 bit default)
- Triggering based on temperatue thresholds. If the TCN75A exits a set
threshold range, the application can be notified via a callback.
Signed-off-by: Daniel DeGrasse <daniel@degrasse.com>
This PR relocates the sensor trigger sample application from the
`sensor_shell` sample to a subcommand in the actual sensor shell. The
subcommand has a UI for enabling a given trigger on a given sensor.
A built-in handler for the data_ready trigger is included that prints
the latest data to the log. Currently, only `SENSOR_TRIG_DATA_READY` is
supported but the groundwork is there to add others. Tested on a
`tdk_robokit1` board.
Signed-off-by: Tristan Honscheid <honscheid@google.com>
Update the sensor shell logic to use the new sensor_read() APIs and
make triggers an option of the sensor_shell sample (this avoids the
trigger stealing the interrupt status from one-shot reads).
Signed-off-by: Yuval Peress <peress@google.com>
Add a new async API based on the RTIO subsystem. This new API allows:
1. Users to create sampling configs (telling the sensor which channels
they want to sample together).
2. Sample data in an asynchronous manner which provides greater control
over the data processing priority.
3. Fully backwards compatible API with no driver changes needed for
functionality (they are needed to improve performance).
4. Helper functions for processing loop.
Signed-off-by: Yuval Peress <peress@google.com>
Clean up the include/source lists in the sensors subsystem. Sort the
list, drop the empty lines that makes it look super long for no good
reason, get away with the tabs to align the file names that does not
really work anyway.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add VREF+ sensor driver and DT node definition.
This driver allows determining the actual voltage applied to an SoC's
VREF+ pin, by comparing the VREFINT internal bandgap voltage reference
with its factory calibration data.
In packages where VREF+ is bonded to VDDA, this permits direct measurement
of VDDA voltage.
Signed-off-by: Kenneth J. Miller <ken@miller.ec>
The LSM6DSV16X is a system-in-package featuring a 3-axis digital
accelerometer and a 3-axis digital gyroscope for industrial and IoT
solutions. The LSM6DSV16X embeds advanced dedicated features such as
a finite state machine (FSM) for configurable motion tracking and a
machine learning core (MLC) for context awareness.
https://www.st.com/en/mems-and-sensors/lsm6dsv16x.html
This driver is based on stmemsc HAL i/f v2.02
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The LSM6DSO16IS is a system-in-package featuring a 3-axis digital
accelerometer and a 3-axis digital gyroscope for industrial and IoT
solutions. The LSM6DSO16IS embeds a new ST category of processing,
ISPU (intelligent sensor processing unit) to support real-time applications
that rely on sensor data. The ISPU is an ultra-low-power, high-performance
programmable core which can execute signal processing and AI algorithms
in the edge.
https://www.st.com/en/mems-and-sensors/lsm6dso16is.html
This driver is based on stmemsc HAL i/f v2.02
Signed-off-by: Armando Visconti <armando.visconti@st.com>
This PR adds a driver for the BMI323, which implements
the following features:
* Enable and disable accelerometer and gyroscope respectively
* Set full scale for accelerometer and gyroscope respectively
* Set data rate for accelerometer and gyroscope respectively
* Get samples (x,y,z) from accelerometer and gyroscope respectively
* Get die temperature
* Set trigger to accelerometer data ready, and accelerometer any motion.
The driver implements device and device runtime power management. If
runtime management is used, it is initialized into the suspended state,
which soft-resets the device to achieve the lowest possible power
consumption, otherwise it is resumed when initialized. When resumed,
the bus is initialized, the feature engine is enabled, and INT1 is
initialized.
The driver only implements the SPI bus at this time. The driver is
prepared to be expanded with I2C support in the future.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
Refactor driver to align a bit more with its Linux counterpart, ie,
ntc_thermistor. This driver did quite a few _unconventional_ things,
like using "zephyr," compatibles, a dedicated node for pre-computed
compensation table (referenced by the actual pseudo-device node), etc.
The comparison helper function should likely be simplified as well (to
avoid the need for custom wrapper for bsearch), but this can be done
later.
In this refactor, each thermistor gets a compatible, e.g. "epcos,xxxx".
Compatibles are known by the driver, so are compensation tables. This
simplifies devicetree files. There's no need to bother about
compensation tables in **every** board file if Zephyr supports a certain
NTC model.
In general we should respect Linux bindings, which in the end influence
how drivers are implemented. In this case, this principle resulted in
simplified, easier to use code.
For future developers, this is how support for a new NTC can be added:
1. Add to the end of the driver:
```c
#undef DT_DRV_COMPAT
#define DT_DRV_COMPAT vnd_model
static __unused const struct ntc_compensation comp_vnd_model[] = {
{ x, y },
...,
};
#define DT_INST_FOREACH_STATUS_OKAY_VARGS(NTC_THERMISTOR_DEV_INIT,
DT_DRV_COMPAT, comp_vnd_model)
```
3. In driver's Kconfig make sure it depends on
DT_HAS_$DT_DRV_COMPAT$_ENABLED
Note: $X$ means _value_ of X.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Initial sensor driver for NPM1300 PMIC charger.
Includes basic configuration of charger voltage and current.
Signed-off-by: Andy Sinclair <andy.sinclair@nordicsemi.no>
This patch adds support for the TI INA3221 current monitor.
This is the datasheet used for reference:
https://www.ti.com/lit/gpn/ina3221
Since this device has three channels, there is a custom attribute to
select which channel is to be used when getting a sample.
Measurements are done on all enabled channels.
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
This commit implements the temperature sensor interface for
the Maxim MAX31865 SPI Temperature Sensor.
Signed-off-by: Fin Maaß <fin.maass@haw-hamburg.de>
Co-authored-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Adds tmd2620 driver and devicetree bindings to work in
trigger and polling mode supporting Power management.
Signed-off-by: Peter Fecher <p.fecher@phytec.de>
Unify the drivers/*/Kconfig menuconfig title strings to the format
"<class> [(acronym)] [bus] drivers".
Including both the full name of the driver class and an acronym makes
menuconfig more user friendly as some of the acronyms are less well-known
than others. It also improves Kconfig search, both via menuconfig and via
the generated Kconfig documentation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The driver utilizes ST Microelectronics library (which
exists in modules\hal\st\sensor\vl53l1x. Platform specific
headers and source files used by the library are included
and adapted for Zephyr.
The driver can be configured in proj.conf to use a
interrupt/polling methods and the use of the XSHUT pin on
the VL53L1X. All uses were tested successfully.
Signed-off-by: Mark Watson <mwatson@prosaris.ca>
Add the implementation for the akm09918c magnetometer driver.
Additionally, add the appropriate node to the TDK robokit1 device
tree. In order to prevent regressions, add the sensor to the sensor
build_all tests and specific tests using an emulator.
Signed-off-by: Yuval Peress <peress@google.com>
This commit adds support for BH1750 ambient light sensor.
The driver works using I2C peripheral in one-time mode.
Signed-off-by: Michal morsisko <morsisko@gmail.com>
Add a driver for the NXP MCUX Quadrature Decoder. The driver
is simple and only implements the phase a and phase b inputs. The
module has additional features which can be added in future PRs.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Adds a driver for TDK InvenSense 42688 six axis IMU. Verified using
the sensor shell sample app via:
- sensor info
- sensor get icm42688p@0
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Signed-off-by: Yuval Peress <peress@google.com>
Support for the measuring the CPU die temperature
for the ESP32 targets S2,C3. The ESP32 support
was ommited due to lack of offset calibration.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Adds an iterable section in ROM to hold constant information, such as
vendor and model name, for all enabled sensor driver instances. This
will be used by the future sensor subsystem to enumerate all available
sensors in the system.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
This commit adds support for the ds18b20 1-wire temperature sensor.
The sampling resolution of the sensor can be set in DT.
In case only a single device is on the bus, the driver issues
skip_rom commands. However, in case DT defines several devices,
the driver will use match_rom commands and therefore it is necessary
to set the rom_id of the device via the sensor attribute interface before
being able to sample sensor values.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Similar to the internal temperature sensor of the stm32
this driver controls the Vbat monitoring in Volts,
using an ADC internal input and the stm32-vbat node of the DTS.
The ref voltage is given by the ADC.
Note that stm32F1x does not propose the feature.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Comparator will monitor signal though ADC channel, based on
user configuration, callback will be triggered.
This will enable comparator functionality for nuvoton MCU utilizing its
ADC threshold detection feature. Implementation is exported through
sensor trigger API. Use of CONFIG_ADC_CMP_NPCX is required.
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
the icm42670 from Invensense/TDK is a 6-axis accelerometer with
gyroscope and temperature sensing capabilities.
this initial driver does not support the devices 2K FIFO or many of the
other advanced features. Instead, only basic features are implemented.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@escolifesciences.com>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This commit implements the temperature sensor interface for
the Maxim MAX31875Low-Power I2C Temperature Sensor.
Signed-off-by: Pete Dietl <petedietl@gmail.com>
