Add sample application for NXP PCA9633 LED driver. This application
test the 4 LEDs by doing the following:
- turn on LEDs
- turn off LEDs
- set the brightness to 50%
- turn off LEDs
- blink the LEDs
- turn off LEDs
The application is based on the stm32373_eval board and expects to have
a PCA9633 LED driver on the bus I2C-1 at the address 0x62.
Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Removed TID implementations wherever it is not required as per
Bluetooth SIG Mesh Model Specification. Removed unnecessary
comments. Add status code value to get publish along with
Light Lightness range status message.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Update message handlers & correct nubmber of bytes that every
handlers should fetch for their further processing as per
Bluetooth SIG Mesh Model Specification.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
When we enabled SEGGER support on the ST SoCs we now how some systems
with really small amounts of memory that the sample can't be built for.
Set a min_ram to exclude such systems.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This allows zephyr to listen LLMNR DNS queries sent by Windows
and respond to them. See RFC 4795 for details.
The feature requires that hostname is set properly to the
zephyr device and LLMNR is configured properly.
Typically following config options are enough for this support:
CONFIG_NET_HOSTNAME_ENABLE=y
CONFIG_NET_HOSTNAME="zephyr-device"
CONFIG_DNS_RESOLVER=y
CONFIG_LLMNR_RESPONDER=y
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
By default the LLMNR is disabled in this sample. You can enable
it by setting CONFIG_LLMNR_RESOLVER=y
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The application does not do much, it just registers to a callback
in order to get information about gPTP.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is not necessary to link 'app' with mbedTLS because mbedTLS is
covered by the 'APP_LINK_WITH_MBEDTLS' mechanism that automatically
links 'app' with mbedTLS.
This patch removes the redundant target_link_libraries invocations.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Make corrections in state binding of Servers as per Mesh Model
Specifications. Previously, when OnPowerUp state equal to 0x02,
then Light Lightness actual state was not assign to last power
down value. Plus when Generic OnOff state changes by client,
then Light Lightness Actual state value get assigned as Light
Lightness Last value instead of default one.
All these issues has fixed here.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
This is a application demonstrating a Bluetooth mesh node in
which Root element has following models
- Generic OnOff Server
- Generic OnOff Client
- Generic Level Server
- Generic Level Client
- Generic Power OnOff Server
- Generic Power OnOff Setup Server
- Generic Power OnOff Client
- Light Lightness Server
- Light Lightness Setup Server
- Light Lightness Client
- Light CTL Server
- Light CTL Setup Server
- Light CTL Client
- Vendor Model
And Secondary element has following models
- Generic OnOff Server
- Generic OnOff Client
- Generic Level Server
- Generic Level Client
- Light CTL Temperature Server
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
CDC ACM is not needed in webusb, communication is going through Bulk
endpoints. Endpoint numbers stay the same only Interface number
changed, so basically only this change is needed:
- .then(() => this.device_.claimInterface(2))
+ .then(() => this.device_.claimInterface(0))
this.device_.claimInterface({2,0}) apart from removing serial port
commands.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Console subsystem is intended to be a layer between console drivers
and console clients, like e.g. shell. This change factors out code
from shell which dealed with individial console drivers and moves it
to console subsystem, under the name console_register_line_input().
To accommodate for this change, older console subsys Kconfig symbol
is changed from CONFIG_CONSOLE_PULL to CONFIG_CONSOLE_SUBSYS
(CONFIG_CONSOLE is already used by console drivers). This signifies
that console subsystem is intended to deal with all of console
aspects in Zephyr (existing and new), not just provide some "new"
functionality on top of raw console drivers, like it initially
started.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Check the return value of close() in socket_dumb_http.c
If non-zero, print the error code
Fixes#8413.
Signed-off-by: Satya Bhattacharya <satyacube@gmail.com>
A HID application can no longer write to the default
interrupt IN endpoint because the addresses are assigned
dynamically. Add hid_int_ep_write() function and leave
it to the hid-core to call the usb_write() with the correct
endpoint address.
fixes: #8424
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This enables testing of the scan, connect, and disconnect
wifi_mgmt functions of the wifi shell module for
the cc3220sf_launchxl.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The ARRAY_SIZE() utility macro will actually test the parameter types,
and ensure that it is only called with arrays, and not arrays decayed
to pointers.
Changes were performed with a simple Coccinelle script.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This adds basic support for declaring gpio nodes in dts for nrf52.
The dts.fixup provides mapping for the generated defines to the config
defines currently used by the nrf gpio driver.
Existing boards that use nrf52 are updated.
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
Due to a bug in KBuild, bluetooth samples needed to #include the gatt
sources to re-use code between samples. This bug was not ported to
CMake so we can stop applying this workaround.
gatt source files are now directly added to the 'app' library instead
of having adapter source files in the app's src directory that
\#include's the gatt files.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The UART_NRFX_FLOW_CONTROL Kconfig symbol was renamed to
UART_0_NRF_FLOW_CONTROL in commit 3f99eefe5a ("drivers: uart: Rename
nrf5 namings to nrfx").
The assignments in samples/bluetooth/hci_uart/microbit.conf and
samples/bluetooth/hci_uart/nrf5.conf were updated in the same commit,
but to the wrong name. Change them to use the correct name.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
UART driver renamed to keep the same convention as SPI and TWI drivers.
All substrings: "UART_NRF5" in defines renamed to "UART_NRFX_UART".
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Increasing the network buffer count for frdm-k64f so that the
device will not run out of memory so easily.
Fixes#7678
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If an entropy driver is available during build, use it to gather
entropy rather than relying on sys_rand32_get(), which provides no
guarantees that the provided numbers will be good enough from an
encryption standpoint.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Default stack size was too small for main thread in qemu_x86
configuration and resulted in stack overflow during initialization.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Use logging settings consistent with other samples/net/sockets/ apps
(which includes error logging enabled by default).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
No need to have a category for grove, instead moved the samples to both
sensors and display based on what the sample does.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is not used by Zephyr directly and comes from a test framework. We
do matching in the sample.yaml file now.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
With updates to bt_gatt_notify and bt_gatt_indicate it is now possible
to pass the Characteristic attribute instead of its value which makes
the code able to verify if attribute properties are set correctly.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Null-checking `pkt` before making a call to net_pkt_unref() suggests
that it might be NULL, but the pointer is dereferenced before it's
checked. Perform the check at the beginning of the function and
dereference and drop its reference unconditionally afterwards.
Coverity-ID: 178789
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
While printing debugging information, an out of bounds write could
happen while trying to write out the NUL byte in the url array.
Coverity-ID: 178790
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The recv() call can return errors, so handle them before reading the
received byte. Unrecoverable errors will just trigger the client
socket to be closed as usual.
Coverity-ID: 182778
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The original implementation of CONFIG_THREAD_MONITOR would
try to leverage a thread's initial stack layout to provide
the entry function with arguments for any given thread.
This is problematic:
- Some arches do not have a initial stack layout suitable for
this
- Some arches never enabled this at all (riscv32, nios2)
- Some arches did not enable this properly
- Dropping to user mode would erase or provide incorrect
information.
Just spend a few extra bytes to store this stuff directly
in the k_thread struct and get rid of all the arch-specific
code for this.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some changes were made in the sample implementation that made the test
fail due to differences in the expected output.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
