Avoid splitting lines when possible while keeping length below 100
chars. Some other minor style corrections.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
The use of a single error variable for RX and TX operations has
shown the OpenThread code to be asserting in some conditions.
This commit splits tx_rx_result into rx_result and tx_result
to avoid such cases.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
If the network interface is down when trying to send a message,
return -ENETDOWN as we cannot send a message in this case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix the tertiary PDU and extended header length value after
the refactoring in the commit c8475b9a3e ("Bluetooth:
controller: ULL: enable TX of CTE with per. adv. PDU").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit fixes some edge cases when using net_bufs with reserved
bytes (headroom) as fragments of a net_pkt.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
net_buf_max_len() provides the maximum number of bytes which can be put
behind the data pointer. This provides a save alternative to using the
size field of the net_buf structure directly, which does not take the
reserved bytes (headroom) into account.
This commit also replaces the usage of the size field in places where
size got used directly. Code has not been adjusted when it is easy to
recognise that the buffer does not have any reserved bytes, which is the
case after allocation or reset. Same goes for the faulty usage by
net_pkt as exposed by the last commit and begin fixed by a separate
commit.
Even though it would be cleaner, I decided to not rename the size field
to e.g. __buf_size in order to keep the amount of code changes low.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
The ASSERT order is backwards, where the shell->ctx is being accessed
before it is being checked as valid. Moving the check for the
shell->ctx to before the using it.
Signed-off-by: Dan Kalowsky <dkalowsky@amperecomputing.com>
Fix the order so that it reflects the actual initialization order,
rather than putting PRE_KERNEL initializations after APPLICATION.
Add SMP in the proper location.
Use the helper function to provide unique identifiers for "devices"
that don't have a device pointer (so don't have a name).
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Refactor the output of device list to use standard API to retrieve the
list of devices, and to always display a status rather than hiding
disabled/failed devices.
Add API to associate a distinct identifier with any "device" that does
not have a name.
Where a device has requires dependencies display the devices on which
it depends.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Move USB MSC configuration to its own Kconfig file.
Align with other class designations and rename
mass_storage.c to msc.c
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Rearrange the LL interface functions in the ll.h file to
group functions use by HCI separate from other buffer and
control flow related functions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the controller version define into ll_feat.h file to
keep the version number and featureset bitmaps together.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added 3 utility functions :
- lwm2m_engine_update_period_service() which updates the period of a
given service.
- lwm2m_engine_update_period_min_observer() which updates the
min_period_sec for a given observe node.
- lwm2m_engine_update_period_max_observer() which updates the
max_period_sec for a given observe node.
Signed-off-by: Thomas LE ROUX <thomas.leroux@smile.fr>
Move LLL header files for all roles to common folder. Move
vendor-specific content to internal header files, in particular ADV
buffer handling. Define the vendor-specific type lll_adv_pdu in a
separate header file lll_adv_pdu.h to avoid cyclic dependency when
moving ADV buffer handling to internal header file. Make sure all
internal header files are in vendor-specific folders.
The goal is to have a more consistent structure for LLL header files
and allow unconditional inclusion of non-internal LLL header files.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
* Added implementations of otPlatCAlloc and otPlatFree methods
necessary for the OpenThread in case of using EXTERNAL_HEAP.
* Added CONFIG_OPENTHREAD_DNSSD_SERVER option to allow enabling
OT_DNSS_SERVER feature.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
Remove the depency on host emulation of ECC for the Use debug keys
option.
This allows the application to use debug keys without shifting the
ECC from the controller to the host, which could potentially alter
the behavior of the application and make debugging this way less useful.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor the ECC emulation setting the supported command bits in order
to group the supported commands together with the implementation of
these commands.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
In order to avoid stalling LLCP procedures blocking done event
processing, done events are now put in a separate memory queue,
and processed by own mayfly function.
This ensures prepare/done refcount balancing and prevents assertion
due to lack of done events.
Signed-off-by: Morten Priess <mtpr@oticon.com>
We need to make sure aux is cleared on reset, otherwise we may end up
with legacy advertising with aux.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Set #0 is used for legacy advertising when legacy HCI commands are used
and in such case it's possible to enable advertising without any prior
configuration. This means we should better always have PDUs in set #0
initialized with default empty data.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
We should remove all advertising sets when resetting controller. It's
enough to just clear is_created flag for each set.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Removes the 3 byte padding at the end of each proxy connection's rx
buffer.
Fixes#18509.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
If user sets CONFIG_NUM_PREEMPT_PRIORITIES=0, then the priority
of the net_mgmt thread will be -1 which is the same as idle thread.
This will trigger assert in kernel as then the minimum coop priority
is -2 in this case. Remove the net_mgmt thread priority setting from
Kconfig file as it is low value and set the coop thread priority
the same way as other network threads are doing it.
Fixes#32375
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
zassert_within should also compare on equality instead
of only greater/lower.
example:
zassert_within(1,1,0); // should return true
zassert_within(1,2,1); // should return true
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
This patch adds implementation of socket option used to get
protocol used for given socket (e.g. IPPROTO_TCP). This option
is not defined in POSIX, but it is Linux extension.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
This patch adds implementation of socket option used to get
type of given socket (e.g. SOCK_STREAM).
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Convert from device_get_binding to DEVICE_DT_GET. In doing this we
no longer need the label in the devicetree node so we remove that.
Removed all __ASSERT_NO_MSG(clk) since we'll get a build error if
DEVICE_DT_GET cant be satisfied, and the clock control api's will
handle reporting if the device_is_ready.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add compilation guards for the feature_rsp_send function to avoid
compilation errors for some configurations.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
It was decided that the Bluetooth audio subsystem should
be in subsys/bluetooth/audio instead of subsys/bluetooth/host/audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove `OPENTHREAD_CONFIG_NCP_BUFFER_SIZE` define since it does not
exist in OpenThread.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Add support for ISO feature bits. This includes extending fields that
hold features to 64 bits to be able to handle the host-controlled
"Isochronous Channels" feature.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Remove support for the Musca-A board. This board is rarely used, few
are available and superceded by Musca-B and Musca-S.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Added Tx fragmentation implementation assertion to check
invalid offset use due to any memory corruptions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use the vendor specific ticker resolution margin in the
central connection initiation offset calculation.
Related to commit 89ab68f242 ("bluetooth: controller:
Vendor specific ticker resolution margin").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove the redundant advanced scheduling event margin used
while finding a free space between existing active central
connections.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the initial connection event length calculation to
when initiating connection so that initiator with advanced
scheduling to place central connections in a non-overlapping
timeline has the correct ticks slot value available.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
If userspace is enabled, then the TLS context needs to be
made a NET_SOCKET kernel object. Without this the userspace
cannot access TLS sockets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Provide the LoRaWAN stack with an optional callback to be
called whenever the battery level needs to be read.
In the case of callback not being provided, the LoRaWAN
stack will report 255 (battery level unavailable) as per
the LoRaWAN spec.
Signed-off-by: Kuba Sanak <contact@kuba.fyi>
Simplify pm subsystem removing PM_STATE_LOCK option. Constraints API is
small and is a key component of power subsystem.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add checks to detect ACL data lengths greater than the
configured maximum Tx buffer size in the controller.
The Host should conform to the LE_ACL_Data_Packet_Length
returned by the LE Read Buffer Size command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Optimize LOW_LAT_ULL scheduling by avoiding redundant
rx_demux mayfly enqueue. Only schedule after checking for
node rx or tx ack presence in the memq.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use the Subsystem defined BT_PER_ADV_SYNC_MAX Kconfig in the
controller implementation of Periodic Advertising Sync Sets.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
A line of code was guarded by CONFIG_BT_L2CAP_TX_FRAG_COUNT instead
of CONFIG_BT_ISO_TX_FRAG_COUNT.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
ISO is a building block for BT_AUDIO but it is not only
useful for AUDIO, and as such should be possible to
enable without enabling BT_AUDIO.
This commit moves iso.c and iso_internal.h to the
host directory (from host/audio) and removes
the CMakeLists.txt.
The /audio directory is left intact for the Kconfig options
it provides, and as a directory for future BLE Audio
content.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit moves the BT_ISO to a common (host and controller)
Kconfig and fixes the ISO buffers in hci_raw.c
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add release of memory acquired for periodic advetising sync. set
when:
- advertising set is removed
- advertising parameters are changed and past PDU type was
extended advertising PDU
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Remove LL_ASSERT from functions that return latest advertising PDU.
The LL_ASSERT was raised in situation that there is no memory to
store unused PDUs memory in a pdu_free queue or extra_data_free queue
Those functions return NULL in such sitation. The returned value is
verified by callers by LL_ASSERT. That gives better context if lack
of memory issue issue occurs.
Besides that there was removed a LL_ASSERT from lll_adv_pdu_and_extra_-
data_alloc. The reasons is the same as above, to give better context
when the lack of memory issue occurs.
This function is used in ULL context (ll_adv_sync_ad_data_set).
If it returns NULL the caller will return BT_HCI_ERR_MEM_CAPACITY_-
EXCEEDED to Host.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add set of functions that will make possible to configure
radio Direction Finding Extension to transmit CTE for periodic
advertising.
Some of the new Radio API functions are provided as separate
functions changing the same Radio peripheral registers, e.g.
radio_df_mode_set_aoa, radio_df_mode_set_aod. This is done on
purpose and is related with lack of DFE in nrf52_bsim.
To avoid use of conditionally compiled constants to represent
e.g. CTE mode; separate functions were introduced.
Thanks to that DF unit tests are able to compile successfully
without changes in nrf52_bsim platform. Also if DFE is added
to nrf52_bsim there is no need to change the code until it is
desired.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The storage for extra data is required for implementation of
CTE transmission with periodic advertising.
Data required to transmit CTE correctly are compound of two parts:
- PDU field CTEInfo
- radio configuration to transmit actual constant tone at the end
of PDU.
Extra data is a storage required for radio configuration data.
Nevertheless it must be in compliance with content of CTEInfo field.
Because of that extra data is stored as part of lll_adv_pdu and
is double buffered like PDU memory.
Bluetooth 5.1 spec. allows to enable or disable CTE TX
and change CTE TX parameters when periodic advertising is
enabled. Besides that CTE TX settings may be set before periodic
advertising parameters are set. In such situation ll_adv_sync_set
may be not yet created.
To overcome these constraints ULL should store CTE TX
settings and forward them to LLL only when CTE TX is enabled.
Because of above reasons ULL stores CTE TX settings in ll_adv_set.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add Directin Finding related features:
- transmission of connectionless CTE,
- antenna switching during CTE transmission (AoD),
to list of features supported by controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Remove support for nRF5340 PDK in the BLE controller.
The controller will now support only the nRF5340 DK.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix cancel of Periodic Synchronization on Coded PHY. Reset
the association of periodic sync instance after validation
of command disallowed.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When handling CoAP Confirmable requests, there is a common
Acknowledgement initialization procedure that repeats for each
response packet initialization. This patch adds a function that
simplifies Acknowledgement initialization procedure encapsulating
repeating code.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
When address resolution is disabled, an identity address has
been added into the resolving list with peer IRK, and device
privacy has not been selected for the peer device then
connection indication shall not be sent to the peer that is
advertising using its identity address.
Fixes#24731.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
acl_read_cb does not handle incoming (ACL) data
if BT_CTLR_TX_BUFFER_SIZE is greater than
USB_MAX_FS_BULK_MPS - BT_HCI_ACL_HDR_SIZE.
Since the host adjusts the data according to
the BT_CTLR_TX_BUFFER_SIZE and does not use ZLP
we cannot start usb_transfer over the possible length of
the whole packet, with or without USB_TRANS_NO_ZLP flag.
But we can read the packet length from the header and
call net_buf_put() when the whole packet is received.
Fixes: #31922
Reported-by: Matias Karhumaa <matias.karhumaa@gmail.com>
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Fail after pairing request and response have been exchanged if the
selected pairing method would not result in the required security level.
This avoids the case where we would discover this after having encrypted
the connection and disconnect instead.
This was partially attempted but lacked checking for authentication
requirement when L3 was required, as well as skipping the check if L4
was required but remote did not support Secure Connections since the
check was after we had taken the legacy branch.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Set the error in the security changed callback when the encryption has
not reached the required security level.
Terminate the pairing procedure in SMP on failure to avoid the security
changed callback being called twice in this case.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Terminate the pairing procedure when disconnected while this was in
progress. This notifies the application that security has failed and
removes the key entry.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Set the SMP flag encryption pending in the case where a bond exists
with ediv and rand equal to zero, i.e LE Secure Connections bond.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
When receiving unexpected SMP PDUs with no pairing procedures in
progress don't treat it as a pairing procedure that has failed.
This causes unexpected SMP PDUs to trigger the pairing failed and
security changed callback at unexpected times.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add status only pairing failed callbacks (complete and failed) so that
these handlers can be added without providing the ability for MITM
pairing procedures.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Rename auth_err_get to security_err_get which better reflect the
error namespace it converts to. Also update to using the enum definition
instead of uint8_t for local variable holding returned value.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
when BT_PASSKEY_INVALID was set, it never updated the fixed
passkey which made its use ineffective
Signed-off-by: Faisal Saleem <faisal.saleem@setec.com.au>
The ATT request buffers are held until the ATT response has been
received. This means that the ATT request buffers are released by the
RX thread, instead of the from the RX priority context of
num_complete.
This can cause a deadlock in the RX thread when we allocate buffers
and all the available buffers are ATT requests, since the RX thread is
the only thread that can release buffers.
Release the ATT request buffers once they have been sent and instead
handle ATT request resending by reconstructing the buffer from the
GATT parameters.
Also re-order the order of resource allocation by allocating the
request context before the buffer. This ensures that we cannot
allocate more buffers for ATT requests than there are ATT requests.
Fixed a buf reference leak that could occur when the ATT request buffer
has been allocated, but GATT returns an error before handing the
responsebility of the buffer to ATT, for example when bt_att_req_alloc
fails.
This is fixed by moving the functionality of att_req_destroy to
bt_att_req_free.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove the ATT request destroy callback which is never assigned
by any of the ATT requests.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix indicate without func not working properly, when sent as a
non-req by GATT this has two propblems:
- The indicate would not be treated as a transaction, and back
to back indicate would be sent without waiting for the confirm
- The destroy callback would not be called on the indicate parameters
since the indicate_rsp callback would not be called.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
ATT channels do support queueing buffer so it no longer need to block
waiting the tx_sem besides the buffer allocation already serves the
same purpose as the application will not be able to have more requests
than there are buffers available.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Allow to request a higher security level during the key distribution
phase.
This is required by ATT and L2CAP since they only react to the encrypt
change event where they resend the current request.
The current request might require a higher security level still and
might have to request a higher security level before the pairing
procedure has been finished.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
When ATT resends an ATT request it is sent as a "response" instead of
as a request. This causes the ATT request buffer to be released and
the ATT request cannot be resent one more time.
This causes a problem when the ATT request requires authentication
but the elevation of security is not enforcing MITM protection.
In this case the ATT will first require security level 2 and then resend
the request once this has been reached.
This will lead to a new ATT error response and ATT will require security
level L3.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix the update keys check allowing to overwrite the keys when using
debug keys. Instead the check disallowed overwriting keys made using
debug keys.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix gatt write command returned "write in progress" when either
hex2bin or bt_gatt_write returned an error.
The write_params.func should not be set if the write command was not
successful.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Sets the sequence number when re-encrypting messages from the friend to
the lpn.
This is a regression from #28511.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Set app_idx and net_idx in the msg_ctx before calling
bt_mesh_keys_resolve when re-encrypting friend messages, as they'll be
referenced inside the function.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Move the public network request command from the end of `lorawan_start`
to the start of `lorawan_join`. This MAC command interacts with the
radio driver, bringing it out of sleep mode, and doesn't put it back.
The public network setting is only needed when joining a network, and
`lorawan_start` can be called well before `lorawan_join`. By moving the
command we save ~600uA before joining (for sx1262).
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Fix missing advertising PDU length initialization which
prevented advertising PDU to be transmitted by Radio. This
issue was reproduced when connectable undirected advertising
was enabled without setting an advertising data.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
llvm 11 doesn't like having preprocessor directives in the expansion
of a macro used as a preprocessor conditional expression.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
After #31176, the network would get stored immediately in
bt_mesh_net_create, causing the address and devicekey to get stored as
their zero-initialized version, as they're only being set in the
bt_mesh_comp_provision call, which fires after.
Fixes#32067.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Fixes problem when fs_opendir invoked on fs_dir_t object,
which is already holding information on opened directory,
overwrites references to other memory objects within
the fs_dir_t object causing resource leak.
If fs_opendir is invoked on already used fs_dir_t object,
it will return
-EBUSY.
Note: The change requires that all fs_dir_t objects should be
initialized to 0.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The commit adds initializations of fs_dir_t variables in preparation
for fs_opendir function change that will require fs_dir_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Reduces some user confusion regarding whether it is related
to "Connection ID", "Channel ID", or "Company ID" for the
uninitiated.
Signed-off-by: Emil Hammarstrom <emil.hammarstrom@assaabloy.com>
Current 6lo implementation is unable to deal with scattered headers
(which should not happen usually, though it's a valid use case), so
let's just fail uncompressing such packet then.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Bogus fragmented packet could be sent without a FRAG1 fragment and hit
reassembly. Let's make sure this does not happen.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In case the current packet is the same as the cached one, let's not
unreference it while clearing the cache.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Though ACK frames are not meant to reach L2 (drivers must ensure this
never happens), let's "re-enforce" the L2 by dropping them.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
All addressing mode but IEEE802154_ADDR_MODE_NONE should have a valid
address. If not, the frame is invalid.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fix OpenISA port to include compiler memory barrier as in
commit 1a14f8b3a6 ("Bluetooth: controller: Use DMB instead
of DSB").
Relates to commit 1af2b91c23 ("Bluetooth: controller: Fix
Tx Buffer Overflow") and to commit ef2ece82c0 ("Bluetooth:
controller: openisa: Fix sanitycheck failures") and to
commit c2fc629dd2 ("Bluetooth: controller: 255 byte AD
payload support").
Fixes#31937.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix for OpenISA rv32m1_vega_ri5cy board not supporting
different IRQ Priority levels for LLL, ULL_HIGH and ULL_LOW
execution contexts.
Fixes#31937.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix BT_CTLR_ULL_HIGH_PRIO default value to equal
BT_CTLR_LLL_PRIO value if BT_CTLR_LOW_LAT is enabled, else
default ULL_HIGH to lower IRQ priority level in comparison
to LLL IRQ priority level. If BT_CTLR_ZLI is enabled,
BT_CTLR_ULL_HIGH_PRIO can default to a priority level value
of 0 and still be lower priority level than the LLL which
is placed at Zero Latency IRQ priority level (highest
priority in the CPU).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
As network_decode needs a target buffer for decoding, the max PDU length
must be checked to prevent overflow on the target buffer. When receiving
a proxy configuration message with excessive length, there's no previous
check for this.
Also pulls the NET PDU length defines out into net.h, so they can be
used when defining the target buffers.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Restore the user requested datarate upon a successful join. Several
regions overwrite the configured datarate through `RegionAlternateDr`,
which means that for these regions, `LoRaMacQueryTxPossible` will not
be evaluating the requested datarate for the first transmission after
joining.
Fixes#31551.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Validate datarates requested by users. As a side effect of this change
the MAC layer is immediately aware of updated datarates. Therefore
`LoRaMacQueryTxPossible` in `lorawan_send` will be using the same
datarate to evaluate the payload length as `LoRaMacMcpsRequest` is
requesting.
Fixes#31551.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Query the default datarate for the configured region, instead of
assuming that the default is DR_0.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Use BOS header structure directly we have access to
instead of casting extern const pointers.
Fixes: #30330
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Attempts to disable PM_STATE_SOFT_OFF would index past the end of the
count array. Increase the array length to allow operations on
PM_STATE_SOFT_OFF.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This patch replaces magic numbers with COAP_TOKEN_MAX_LEN value and
removes unnecessary castings of token buffer type.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
RFC 7252 (CoAP) specifies value of the Version (Ver) field in the
protocol header to value 1. This patch defines value of the Version
field to make packet initialization easier. All samples and tests
are updated to use the new COAP_VERSION_1 field when initializing
a CoAP packet.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Fix Tx Buffer Overflow caused by uninitialized node_tx
memory being used by ULL ISR context due to Compiler
Instructions Reordering in the use of MFIFO_ENQUEUE.
The MFIFO last index was committed before the data element
was stored in the MFIFO due to Compiler Instructions
Reordering.
This is fixed now by adding a Data Memory Barrier
instruction alongwith a compiler memory clobber.
Fixes#30378.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use of Data Memory Barrier instruction with memory clobber
in ARM Cortex M architectures is sufficient in the
controller implementation to keep compiler data access
instructions in order so that an ISR vectoring has memory
accesses in the correct order as intented by design.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Mark the option BT_FIXED_PASSKEY as an insecure option.
During Legacy pairing the passkey is used as encryption key, and
brute-forcing this is easy.
During LE Secure Connections the passkey is checked one bit at a time,
so when it is fixed the passkey can be deduced with series of pairing
attempts.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The Bluetooth SMP protocol depends on the BT_ECC for the LE Secure
Connections pairing. Since this feature cannot be disabled we must
select this dependency.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix fixed passkey for legacy pairing. The pairing procedure fails
because the temporary key (TK) has not been set for this pairing
procedure.
Fix this by always requesting the legacy TK.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix misleading message in the bluetooth shell when the id-create
command returns en error code. In this case both failure and success
messages are printed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add options to control the behavior of the init command.
Option no-settings-load allows the user to create identities
with the id-create command after bt_enable() but before settings_load().
Option no-ready-cb allows the user to test using synchronous enable,
since this sometimes leads to different behavior of the stack.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Prevent the bt_rand function from being called before bt_enable.
Depending on the implementation of bt_rand this function cannot
be called before bluetooth has been initialized. With host supplied
crypto functions the HCI LE rand command is used for example.
The use case for calling bt_id_create before bt_enable is meant for
when the application has storage for the identity instead of the stack.
So we add the requirement that the application has to have storage
for the identity resolving key (IRK) in addition when the local
device is privacy-enabled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix the default ULL_HIGH execution priority to be lower than
LLL execution priority to reduce Radio ISR service latency.
Also, default to Zero Latency IRQ for Radio ISR if enabled
in the kernel.
Fixes#29994.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
ad_len parameter is not length of complete advertising data, but number
of bt_data structs passed to bt_le_per_adv_set_data - we pass only one.
Also memset target buffer before converting hex string so data shorter
than specified will be right-padded with zeroes instead of some
leftovers.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
The mem_pool Kconfig API is deprecated as allocation now uses a k_heap.
Update to allocate a heap with the same amount of memory as was
defaulted with mem_pool customization.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Originally the file cache used a mem_pool, but that data structure has
been deprecated and replaced by a heap that includes metadata in the
heap area. As a result attempts to allocate all blocks will fail
because some of the reservation intended for cache data is now holding
metadata instead.
It's not immediately clear how to adjust the required heap size to
support this metadata as it depends on heap chunk units and data
structures that are not visible to the application. Experimentally a
value of 24 bytes works, while smaller values do not.
Further the previous Kconfig API to configure the allocation pool is
completely inappropriate with the new heap data structure which has
such different behavior.
So: Deprecate the old Kconfig API. Add a new Kconfig option to
directly control the cache size. Infer a default cache size that
works with the old mem_pool parameters assuming a per-block overhead.
But to avoid wasted memory use the heap allocation only when the
application customizes the size, and use a slab in other cases.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When pushing received data to the application, check that app
was able to receive the data. If the application already closed
the socket, then we must free the received net_pkt in order to
avoid memory leak.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we cannot allocate net_pkt or net_buf, then check this condition
properly and release other resources that were already allocated.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some targets, such as network cores on a multi-core SoC, do not
support system power management because they do not control the SoC.
Provide a flag that can be selected to inihibit enabling system power
management on those targets.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This reverts commit f38ba314ea.
nrf5340dk_nrf5340_cpunet doesn't support power management, but that
should be handled another way.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
We need to make sure that when listening a connection establishment,
the connection gets cleared if we do not receive final ACK.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix the mayfly callee id for the rx_demux scheduling under
the LOW_LAT_ULL implementation. This could be causing
undefined mayfly execution behavior in nRF51x SoC.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove the deprecated bt_conn_create_slave_le function.
This was deprecated in the 2.3.0 release.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fixes problem when fs_open invoked on fs_file_t object, which is already
holding information on opened file, overwrites references to other
memory objects within the fs_file_t object causing resource leak.
If fs_open is invoked on already used fs_file_t object, it will return
-EBUSY.
Note: The change requires that all fs_file_t objects should be
initialized to 0.
Fixes: #29478
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds initializations of fs_file_t variables in preparation
for fs_open function change that will require fs_file_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds initializations of fs_file_t variables in preparation
for fs_open function change that will require fs_file_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds initializations of fs_file_t variables in preparation
for fs_open function change that will require fs_file_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Conform to Bluetooth Specification, if the LE_Scan_Enable
parameter is set to 0x01 and scanning is already enabled,
any change to the Filter_Duplicates setting shall take
effect. Disabling scanning when it is disabled has no
effect.
Fixes#31019.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
There was one case where the dummy policy was returning a wrong type
in the function pm_policy_next_state.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
CoAP RFC (RFC7252) states that end points should support
the CoRE Link Format of discoverable resources as described in RFC6690
(refer section 7.2 of the RFC7252).
Fixes#31609
Signed-off-by: Kasun Hewage <kasun.ch@gmail.com>
Fix regression in adding the state for Connection Parameter
Request being rejected where in Connection Parameter Request
Procedure state machine was prematurely reset before the
reject PDU was enqueued.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing initialization of ticks_to_offset value on
instantiation of new peripheral context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix repeated offsets in LE Connection Parameter Request PDU
due to rounding errors. Use tick units of connection
interval to calculate the offset units.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix deferred Connection Parameter Request offset population
by introduction of explicit states waiting for the offset
calculations to complete in the ULL_LOW context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix deferred Connection Update offset population by
introduction of explicit states waiting for the offset
calculation to complete in the ULL_LOW context.
Fixes#29636.
The problem was, in an encrypted connection the enqueued PDU
to be transmitted is encrypt in the prepare callback by the
hardware and swapped to a different buffer for transmission;
the deferred offset population did not reflect in the
transmitted PDU as it was filled in the cleartext buffer
while encryption completed into the encrypted buffer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix error introduced by pull request:
https://github.com/zephyrproject-rtos/zephyr/pull/31591
Zephyrs CMake extension function zephyr_library_sources_ifdef()
does not allow to use complex conditions to toggle if
sources should be included in build or not.
It allows to use only single variable as an input for
feature_toggle argument because it is double-expanded
in contition statement in the function.
In case there is a requirement that source file is included
when more complicated condition is true we have to fall-back
to reqular if() statement and zephyr_library_sources().
The fix is required because without it radio_df.c source
is never compiled. If DF functionality is enabled build
will fail because of missing functions implementation.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
the implementation of spinlock validation uses two LSB bits in the
bottom of a pointer union to store a CPU index, which only has space
for 4 CPUS. the MP_NUM_CPUS should be <= 4.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
After the latest upmerge, OpenThread requires explicit configuration
of the Master Key. This commit adds a Kconfig symbol that can be
used to setup its value. By default no Master Key is configured and
OpenThread generates a random one.
The Sockets Echo samples are configured with a fixed key with this
commit.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Syncing here is done with a semaphore declared on a function stack
and released in a callback. In case of a cancelled transfer (eg.
cable disconnect) the callback is never called.
The fix introduces a periodic check if a transfer is still valid.
Signed-off-by: Jan Pohanka <xhpohanka@gmail.com>
Only start the network logging backend if the autostarting
option CONFIG_LOG_BACKEND_NET_AUTOSTART is enabled.
Also, call init to make sure that the backend is initialized
properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix implementation to run local peripheral initiated control
procedure with instant in parallel with remote initiated
encryption procedure.
Relates to #28887.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
If a PHY update is waiting for the instant to be reached and the master
starts the encryption procedure, store the pending PHY update procedure
and handle it simultaneously with the encryption setup.
This fix prevents the encryption setup from stalling and thereby timing
out after 40s, after which the master drops the link.
The ll_conn::llcp::encryption can not longer be unioned with the
ll_conn::llcp:phy_upd_ind as one would overwrite the other.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Add conditional compilation on peripheral and central
specific control procedure implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix BIG Sync Terminate Command to generate Sync Established
event if Sync initiation is in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added missing allocation of node rx buffer required for
generation of Broadcast ISO Sync Established.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Token and payload are appended from data buffers to a CoAP packet
being encoded. Keyword const was missing for parameters in functions
appending these parts to a packet.
Now token and paylod can be copied to CoAP packet from constant
buffers, that can be stored in ROM.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
This patch introduces COAP_TOKEN_MAX_LEN definition in coap.h file.
This definition replaces magic number across CoAP protocol
implementation and CoAP samples.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Clean up logging menuconfig by grouping configuration into
sections like: mode, processing configuration, backends.
Additionlly, removed LOG_ENABLE_FANCY_OUTPUT_FORMATTING which is no
longer in use.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The net_buf was never unref'ed when the host received an
ISO package that was a SINGLE.
Also adds a few additional debug messages.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
`iso send` may take an optional "count" parameter but the
number of optional arguments was incorrect.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The DF tests are implemented to be executed with nrf52_bsim platform.
The nrf52_bsim platform does not include Direction Finding Extenstion.
Due to that, radio_df.c compilation failed with error about missing
antenna configuration in DTS.
To solve the problem, I've changed nrf.cmake to include radio_df.c
file when CONFIG_BT_CTLR_DF is defined and CONFIG_SOC_SERIES_BSIM_NRFXX
is not definded.
Thanks to that any other platform is not affected. The file will not
build if there is no appropriate configuration or there are missing
features in a hardwared.
Unit tests have provided stub imlpementation or radio functionality.
If nrf52_bsim has implemented Direction Finding Extension, the
DF unit tests code will stil work and will not require additional
changes. Also content of the file is not affected by contional
compilation entries.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Remove ATT modifying the L2CAP channel state by unassigning the
the connection pointer on timeout.
Unassigning this pointer does not prevent the ATT channel from receiving
since bt_l2cap_recv does not inspect this pointer before calling the
channel receive function.
This prevented the disconnected callback from being called on the
channel after the channel had timed out, but since the disconnected
callback now handles this case this workaroun is no longer needed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Handle ATT timeout on disconnected ATT channel.
When the ATT channel is disconnected with a pending request the ATT
timeout is canceled and the response processed with an error code.
However canceling of delayed work is not guaranted to succeed, e.g:
"Work queue thread has removed the work item from the queue but has not
called its handler"
This could lead to timeout handler being invoked after the disconnected
handler.
Fixes: #29098
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
So far device_pm_state_str() was built only when CONFIG_PM=y (former
CONFIG_SYSTEM_POWER_MANAGEMENT=y). 'device list' shell
command (CONFIG_DEVICE_SHELL=y) is using that function when
CONFIG_PM_DEVICE=y. This resulted in build failures when CONFIG_PM=n, as
linker could not find its implementation.
Build device_pm_state_str() function regardless of CONFIG_PM value, so
device shell module builds successfully in every case.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Parallel transfer to same endpoint is not supported and
may cause a deadlock. Adding a check to prevent starting
the transfer if tranfer is already ongoing on same endpoint.
Transfer status was not checked when accessing to transfer
from endpoint callback. Adding status check, to prevent
a double completion.
Fixes#30736
Signed-off-by: Kari Hulkko <kari.m.hulkko@gmail.com>
If we evict enough pages to completely fill the backing store,
through APIs like k_mem_map(), z_page_frame_evict(), or
z_mem_page_out(), this will produce a crash the next time we
try to handle a page fault.
The backing store now always reserves a free storage location
for actual page faults.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Backing stores and eviction algorithms will be included here.
Exactly one must be chosen, with a default option to leave
the implementation to the application.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fix compilation error caused by use of wrong header file:
nrfx/hal/nrf_radio.h instead of hal/nrf_radio.h.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
This targets was previously enabling PM but the code was doing nothing
because the logic was under an unsatisfied ifdef condition.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Change subsystem to use struct pm_state with substate-id instead of
using only the power state category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Remove conditionals (PM_DEEP_SLEEP_STATES and PM_SLEEP_STATES) from
power management code. Now these features are always available when
power management is enabled.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Migrate the whole pm subsystem to use new power states information
from power_state.h and get states and residency properties from
device tree.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This enables to use net_buf_append_bytes without passing an allocator in
which case the code would attempt to use the net_buf_pool of the
original buffer.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This removes the z_ prefix those (functions, enums, etc.) that
are being used outside the coredump subsys. This aligns better
with the naming convention.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds some shell commands to the logging backend. Since
this is a simple backend, only get/clear errors are
implemented.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds two new APIs to the coredump subsystem to perform
query and command. These can be used to query coredump subsys
for information, and to perform commands such as finding
out if there is a stored coredump.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The coredump frontend (mostly) consists of wrappers of backend
functions so there is really no need to track errors at
the frontend level. Let the backends deal with their own errors
and this simplifies the code a bit.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Originally there was a null backend but it was removed before
code was merged. However, some leftover code still refers to
this null backend. So remove the leftovers.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If we evict enough pages to completely fill the backing store,
through APIs like k_mem_map(), z_page_frame_evict(), or
z_mem_page_out(), this will produce a crash the next time we
try to handle a page fault.
The backing store now always reserves a free storage location
for actual page faults.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Backing stores and eviction algorithms will be included here.
Exactly one must be chosen, with a default option to leave
the implementation to the application.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Coded PHY is only enabled by default if the application is using
BT_HCI_RAW.
Coded PHY is not needed in most applications.
By disabling Coded PHY, most applications will:
* Get smaller in terms of flash and ram usage
* Not get vurnerable to devices trying to switch to Coded and
thereby increasing power consumption.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Refactor the output of device list to use standard API to retrieve the
list of devices, and to always display a status rather than hiding
disabled/failed devices.
Add API to associate a distinct identifier with any "device" that does
not have a name.
Where a device has requires dependencies display the devices on which
it depends.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This emulator pretends a generic eSPI Host. It supports basic virtual
wires and port80 operations.
There are functions to trigger actions on the host side e.g. for
setting a virtual wire from the host to the eSPI slave, use
emul_espi_host_send_vw. It will prepare data and set a proper event
on the slave side which will trigger callback (if there is any).
Signed-off-by: Dawid Niedzwiecki <dn@semihalf.com>
Add routine to calculate crc of flash region. Read 32 bytes at a time
from flash instead of 4 bytes, for a significant speed up of the flash
image crc calculation.
Signed-off-by: Klaus H. Sorensen <khso@vestas.com>
The callback function canopen_odf_1f56 is called with the can od lock
held. Release the lock while performing time consuming flash reading and
crc calculations, and reacquire the lock before returning from the
function.
Signed-off-by: Klaus H. Sorensen <khso@vestas.com>
Fix compilation error if CONFIG_BT_CTLR_DF is not defined.
If DF was not enabled, there was missing CONFIG_BT_CTLR_DF_MAX_-
ANT_SW_PATTERN_LEN and undeclared symbol was found.
Split ll_df.h into two parts:
- ll_df.h that is generally includeable and allows to successfully
compile sources when DF is not enabled.
- ll_df_internal.h to be used in soucres that are compiled when
DF is enabled.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Direction Finding requires initalization of a set of registers
in Radio peripheral. Also it requires information about antenna
matrix unit that are provided by end user in DTS overlay.
Implemented initialization step is responsible for validation of
hardware information delivered by DTS and setting up DF related
registers in Radio.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add support for Direction Finding antenna configuration in
Nordic hal of Bluetooth controller.
Add handling of response for HCI_LE_Read_Antenna_Information
HCI command in controller (upper and lower link layer).
Handling of response to the command requires antenna matrix
configuration.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
CoAP protocol defines registry of Content-Format option values.
This patch adds this enumeration to coap header file to make it
available to all applications using CoAP protocol. It modifies
code using CoAP service to use new enumeration.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
This patch implements a service that adds multiendpoint
capabilities to RPMsg. Multiple endpoints are intended to be used
when multiple modules need services from a remote processor. Each
module may register one or more RPMsg endpoints.
The implementation separates backend from the service, what
allows to extend this module to support other topologies like
Linux <-> Zephyr.
Co-authored-by: Piotr Szkotak <piotr.szkotak@nordicsemi.no>
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
After nrfx glue code was decoupled from nrfx sources, it is no longer
feasible to use those inclusions in the <nrfx/hal/nrf_*.h> form (there
is no point in adding the main directory of the hal_nordic module as
an include path solely for this reason). Remove then the nrfx/ part.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Fixes an issue where `lorawan_send` would return prematurely when
`LORAWAN_MSG_CONFIRMED` is mixed with unconfirmed messages.
All calls to `LoRaMacMcpsRequest` result in `McpsConfirm` being run,
where the semaphore `mcps_confirm_sem` is given. However this semaphore
is only taken when `LORAWAN_MSG_CONFIRMED` is set.
Therefore if an unconfirmed message is sent, any following confirmed
messages will return from `lorawan_send` immediately as the semaphore
will be available from the previous send. The return value would also
be wrong for the same reasons.
Fixed by only giving the semaphore in situations when it is being
blocked on.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add Kconfig option to randomize the initial ACK timeout, as specified in
RFC 7252. The option is enabled by default.
Additionally, finetune the default value of COAP_INIT_ACK_TIMEOUT_MS
option, to match the default ACK_TIMEOUT value specified by the RFC
7252. The RFC does not specify the minimum/maximum value of the
ACK_TIMEOUT parameter, but only suggests it should be no lower than 1
second, so adjust the option range to reflect this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Introduce retransmission counter to the coap_pending structure. This
allows to simplify the retransmission logic and allows to keep track of
the number of remaining retranmissions.
Additionally, extend the `coap_pending_init()` function with `retries`
parameter, which allows to set the retransmission count individually for
each confirmable transaction.
Fixes#28117
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The commit adds Kconfig option:
CONFIG_IMG_MGMT_REJECT_DIRECT_XIP_MISMATCHED_SLOT
that enables verification of base address Direct-XIP binary, upon
upload, and rejects binaries that would not be able to start from
available address.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The definition of lock, k_spinlock type, that has been used to guard
variables holding statistical data for log_strdup has been missing
static modifier, which caused the lock structure to be reallocated
on stack each time an execution entered the block.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Fix size of L2CAP disconnect request buffer pool which did not include
the size of the L2CAP signal header.
Regression from: 3346aa4d39
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Defined 625 and 1250 as context specific interval common to ULL and LLL.
Checked with bluetooth sanity checks.
Fixes#23314.
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Some proprietary protocols that reuse the Bluetooth LLCP logic requires
that the CPR interval has a valid range that differs from the Bluetooth
specification defined.
Vendor must implement the function (ull_vendor.h)
uint16_t ull_conn_interval_min_get(struct ll_conn *conn)
that returns the valid limit for the given connection.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Multi-instance resources shall report its dimension (number of
resource instances) on discovery. Since it was not possible to tell
simply on the instance count whether the resource is multi-instance or
not (there could be a multi-instance resource with only one instance
avaialble) add a new parameter to the structure representing resource,
indicating whether it's multi-instance or not.
Add dimension information to the discovery result.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Remove any references of Bootstrap Discovery from Device Management
Discovery procedure and fix some of it's logic following the
specification.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Bootstrap discovery was not implemented properly in the LwM2M engine.
Although, there were some indications in the source code that it is
implemented, it was not done according to spec (and actually broken).
Given that Bootstrap Discovery procedure differs a lot from the regular
Device Management Discovery (different permissions, different
information returned), it's easier to implement it as a separate
function (`bootstrap_discovery()`) instead of making the existing
`do_discovery_op()` function even more complicated.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In std_print(), the log arguments were casted to uint32_t before
being sent further to the output function.
For integer types which can not be represented by uint32_t, the
degraded user experience may be acceptable.
However, for string arguments, the output function will eventually
dereference the pointer, so if the "char *" can not be represented
by uint32_t, bad things are going to happen. In practice you will see
this on 64-bit systems where sizeof (char *) is 8 byte and addresses
higher than 0x80000000.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
This commit improves portability somewhat on machines where sizeof
(int) is less than sizeof (void *). Note that the implementation is
still not portable and will fail when you start using addresses which
can not be represented by "int cast to unsigned int".
On RISC-V 64-bit with RAM on 0x80000000 we previously got hit by
E: Exception cause Load access fault (5)
ld s0,16(a0)
a0: 0xffffffff80025610
(The int should probably be changed to intptr_t if possible.)
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Allow vendor specific increase of user operation capacity for LLL, to
support queuing additional ticker operations from lower link layer
context. These would typically take place in lll_xxx_prepare.
Signed-off-by: Morten Priess <mtpr@oticon.com>
For Bluetooth Mesh, counter shall be increasing by one when
every try to establishing friendship.
Counter to be used when create friendship security material.
So this value shall be consist between friend and lpn.
Due to zephyr bluetooth mesh send previous counter, after that
it will automatically increase one, which will result in the
incorrect generation of friend key when key rephase.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Make sector size used by flash disk configurable and expose new disk and
fatfs configurations to Kconfig.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
Now that we generate a header that extern's all possible devicetree
based device struct we can remove DEVICE_DT_DECLARE and
DEVICE_DT_INST_DECLARE as they aren't needed anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch brings support for AF_PACKET and SOCK_RAW type of sockets.
In net_conn_input() function the new flag has been introduced -
'raw_pkt_continue' to indicate if there are other than AF_PACKET
connections registered.
If we do not have other connections than AF_PACKET, the packet is
solely handled in net_conn_input() (or to be more specific in its
helper function - conn_raw_socket()).
Otherwise, it is passed back to net_conn_input in IPv4/6 processing.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
The new function - namely conn_raw_socket(); has been introduced to
handle raw sockets processing. Its code, up till now, only was
executed when IS_ENABLED(CONFIG_NET_SOCKETS_PACKET) was defined.
After this change it can be reused when one would like to handle
raw sockets also when CONFIG_NET_{UDP|TCP} are enabled.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Some parts of subsys/dfu/boot code are re-implementations of
what is implemented in the MCUBoot repository.
Mcuboot's repository already provide implementation of function
required for application for interact with the MCUboot.
This patch introduces new MCUBOOT_BOOTUTIL module which covers
common code which is used in the bootloader and the chainnloaded
application.
dfu/boot: use MCUBoot's source code
Module was reworked so it start using MCUBoot's
bootutil_public API instead of copied code.
Reworked boot_is_img_confirmed() used MCUBoot's API
for determine image_ok flag.
mcuboot_shell switchd to use MCUboot's boot_read_swap_state_by_id()
This is MCUBoot function, use it for avoid linking conflict.
test/subsys/mcuboot: fix `test_write_confirm`
dfu/boot library was reworked so it uses MCUboot's bootutil_public
library whenever it can.
The library required that image was marked as copy-done before it
can be pending.
This patch adds such mark which fixes the test.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add a check to stop a multicast address to be registered multiple times.
This can happen if the application is using net_if_ipv6_maddr_add()
directly.
Tested on the existing bluetooth/ipsp sample:
<wrn> net_if: Multicast address ff02::1 is is already registered.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
6lowpan over BLE should work without solicit node multicast messages
according to RFC7668[1], but that requires Neighbor Solicitation with
Address Registration Option, which is currently not implemented in
either Zephyr or Linux. This is causing the router to fallback to normal
neighbor solicitation based discovery, but the NS frames are being
discarded in the host stack because the solicit node multicast groups
are not registered.
This drops the NET_L2_MULTICAST_SKIP_JOIN_SOLICIT_NODE as a workaround
and adds a TODO about it.
[1] https://tools.ietf.org/html/rfc7668#section-3.2.3
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
The mesh settings.c module is a giant piece of code responsible for
storing the mesh stack configuration. Such approach makes it difficult
to control the data to be stored, breaks the stack modules'
encapsulation by forcing them to reveal the internal kitchen, which
leads to unpleasant issues such as #19799.
This commit moves the responsibility of storing the configuration
to corresponding modules while keeping control of the moment of storing
the configuration and of starting the stack after the settingss loading
is completed.
This doesn't introduce any abstraction between the mesh settings.c and
other modules as it will add more complexity and overhead than necessary
for the actual task.
Fixes#19850
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add public function to set Constant Tone Extension transmission
enabled or disabled for periodic advertising.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Enable CTE HCI command requires update of a state of its
execution after receive command completion response from
controller. Host has already implemented such functionality
but it was used only internally by hci_core.
This commit changes it to be accessible from other sourece files
in host.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add implementation of HCI_Set_Connecitonless_CTE_TX_Enable
command to HCI. Add scratch implementation of command handling
functions to controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix compilation error caused by missing header files.
Reorganized order of header files include.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Correct names of kconfig entries to mach to style of other entries.
Style correction in hci.c. Use the same approach of checking if
Kconfig entry is enabled.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Function shell_root_cmd_find was only used in shell_utils.c file.
Hence it is changed to static and renamed to root_cmd_find.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Add Kconfig option NET_HOSTNAME_UNIQUE_UPDATE to allow the unique
hostname - which is derived from the network interface's link
address - to be updated on both initial assignment and updates of
the link address.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
This is in order to reduce the redundancy code writing for fatal and
assert handler for error case testing. They can be used both in kernel
and userspace, and are also SMP safe.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
`delta_size` was incorrectly used to assess whether extended option
length field shall be used. In result, options larger than 268 bytes
were not encoded properly.
Fixes#31206
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
* add toolchain abstraction for coverage
* add select HAS_COVERAGE_SUPPORT to kconfig
* port gcov linker code to CKake for arc
* give user permission to gcov bss section
* expand the size of iccm and dccm to 1M
Signed-off-by: Jingru Wang <jingru@synopsys.com>
MESH/NODE/CFG/HBS/BV-01-C expects the MinHops to be 0x7f after
disabling subscription, but 0x00 for subsequent Get requests.
MESH/NODE/CFG/HBS/BV-02-C expects us to return previous
count value and then reset it to 0.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
The #if statement used IS_ENABLED to check if it was defined.
IS_ENABLED will only return true if the value is 1, and false otherwise.
If the NET_TCP_MAX_SEND_WINDOW_SIZE value would be e.g. 8, then the
check would fail.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If we receive data that is out-of-order, queue sequential
TCP segments until we have received earlier segment or a timeout
happens.
Note that we only queue data sequentially in current version i.e.,
there should be no holes in the queue. For example, if we receive
SEQs 5,4,3,6 and are waiting SEQ 2, the data in segments 3,4,5,6 is
queued (in this order), and then given to application when we receive
SEQ 2. But if we receive SEQs 5,4,3,7 then the SEQ 7 is discarded
because the list would not be sequential as number 6 is be missing.
Fixes#30364
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is a pairing function with bt_le_scan_cb_register()
to used for remove the scanner callback from callback list.
Signed-off-by: chao an <anchao@xiaomi.com>
Modifies openthread shim layer to automatically join multicast
addresses as they are added to zephyr from openthread, unless the
address is interface-local or link-local. This allows incoming
openthread multicast group messages to avoid being filtered by
zephyr ipv6 recv.
Fixes#31085
Signed-off-by: Joel Frazier <frazieje@gmail.com>
During coverage reports generation in C++ code gcov_coverage_dump()
function would get stuck in endless loop. Fix by checking list head
pointer with current list pointer.
Signed-off-by: Marko Poljanić <mpoljanic@gmail.com>
Fixed misalignment of bitflag in ll_conn type causing unintentional
overwrite between unions. Common flag must be present in master/slave
uinons as well. Problem is only present when enabling feature
CONFIG_BT_CTLR_CONN_META, which is default disabled.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Reserve two link rx buffer for each supported Broadcast ISO
sync instance, for establishment and for sync lost node rx
generation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
For tx_power_max_get and tx_power_floor, only allow for
positive values of txpower if they are defined.
Signed-off-by: Aurora Sletnes Bjørlo <aurora.sletnes@nordicsemi.no>
The LwM2M firmware pull object no longer uses the system workqueue
to execute firmware_transfer(), but directly executes it itself.
Previously, the workqueue would be blocked because firmware_transfer()
indirectly calls a blocking connect(). This would lead to problems
with e.g. modem drivers that use UART to interface with the modem
hardware, as some UART drivers use the workqueue.
Fixes#31053.
Signed-off-by: Maik Vermeulen <maik.vermeulen@innotractor.com>
As the tcp header struct can be cast to unaligned memory, mark
it as packed and access fields using UNALIGNED_GET/PUT when
needed.
Fixes#31145
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Get rid of weak functions adding a new API to register an object to
receive notifications when the system changes power state.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Rename Kconfig BT_CTLR_SCAN_SYNC_ISO_MAX to
BT_CTLR_SCAN_SYNC_ISO_SET, to be consistent with other
Kconfig naming.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
AUX_CONNECT_RSP PDU static buffer definition was missing one
byte required for the Extended Header Flags.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Document with comments, the explanation of node rx count and
the design of the free rx PDU management.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix for scenarios where in active PHY Update Procedure or
Connection Update Procedure could cause temporary depletion
of the free Rx PDUs in the queue between LL/HCI thread
context to LLL context. Symptoms being on-air NACKing during
the above said procedures, causing supervision timeouts due
to procedures not completing at instants.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the implementation of PA/LNA PPI configuration
which was done on every Tx or Rx as common code to be
executed once per radio reset. And only setup the timeout
and enabling of PPI at every Tx or Rx.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
For PA/LNA implementation use NRF_P0/P1 defines instead of
the deprecated NRF_GPIO to reference GPIO Port 0 registers.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the missing GPIOTE channel disable when GPIOTE channel
is alternately used between PA and LNA use.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression in PA/LNA support wherein the GPIO pins where
left in undefined state after each radio event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression, add back missing call to radio_setup HAL
interface. This is needed to setup the initial PA/LNA GPIO
states.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix crash in ATT when the response for a request is received after
the ATT timeout has fired and the ATT channel has been detached.
Add similar handling for all ATT channel operations.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Both RS and DAD timeouts are simplified because the delay is a
constant, and by construction the list of timeouts is in increasing
time remaining.
Refactor to avoid repeating the expression that represents the time
until DAD state expires. Uniformly use unsigned operands in deadline
calculation.
Note a case where the racy idiom for retaining an existing timeout is
required in the current work API, but can be replaced with a robust
solution in the proposed new API (the reschedule API replaces any
existing pending update, but the schedule API will leave an existing
scheduled submission in place).
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The existing implementation is inconsistent in that checking for
expired routers when a timeout is processed detects end-of-life
correctly (when the remaining duration exceeds the signed maximum),
but the calculation of time remaining before expiration uses only
unsigned calculation. So when the set of routers is changed the newly
calculated timeout will not recognize routers that have expired, and
so those routers expired late. In the worst case if the only
remaining router had expired the timer may be set for almost two
months in the future.
Refactor to calculate remaining time in one place and as a signed
value. Change a function name to more clearly reflect what it does.
Avoid unnecessary race conditions in k_work API.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The net_timeout structure is documented to exist because of behavior
that is no longer true, i.e. that `k_delayed_work_submit()` supports
only delays up to INT32_MAX milliseconds. Nonetheless, use of 32-bit
timestamps within the work handlers mean the restriction is still
present.
This infrastructure is currently used for two timers with long
durations:
* address for IPv6 addresses
* prefix for IPv6 prefixes
The handling of rollover was subtly different between these: address
wraps reset the start time while prefix wraps did not.
The calculation of remaining time in ipv6_nbr was incorrect when the
original requested time in seconds was a multiple of
NET_TIMEOUT_MAX_VALUE: the remainder value would be zero while the
wrap counter was positive, causing the calculation to indicate no time
remained.
The maximum value was set to allow a 100 ms latency between elapse of
the deadline and assessment of a given timer, but detection of
rollover assumed that the captured time in the work handler was
precisely the expected deadline, which is unlikely to be true. Use of
the shared system work queue also risks observed latency exceeding 100
ms. These calculations could produce delays to next event that
exceeded the maximum delay, which introduced special cases.
Refactor so all operations that use this structure are encapsulated
into API that is documented and has a full-coverage unit test. Switch
to the standard mechanism of detecting completed deadlines by
calculating the signed difference between the deadline and the current
time, which eliminates some special cases.
Uniformly rely on the scanning the set of timers to determine the next
deadline, rather than assuming that the most recent update is always
next.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
SWI IRQ line mapping for nRF5340 shall use
CONFIG_SOC_NRF5340_CPUNET for conditional compilation
instead of the board define, so as to allow new boards to
use the BLE controller implementation.
Fixes#30488.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
If UART_INTERRUPT_DRIVEN isn't selected the CDC ACM class driver won't
build. Don't require the user's intervention to avoid this.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Adds a new family of `struct net_buf` operations that remove data from
the end of the buffer.
The semantics of `net_buf_remove_mem` have been chosen to match those of
`net_buf_pull_mem`, i.e. the return value is a pointer to the memory
that was removed.
The opposite of this function, `net_buf_remove`, would need to return
the old end of the data buffer to be useful. However this value is
always an invalid target for reading or writing data to (It points to
the middle of unused data).The existance of the function would be
misleading, therefore it is not implemented.
Fixes#31069.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add publicly accessible function to set Constant Tone Extension
parameters for CTE transmission with periodic advertising.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add implementation of a wrapper for HCI_LE_Set_-
Connectionless_CTE_Transmit_Parameters send command.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add Direction Finding to host initialization sequence.
It allows to get information about Direction finding
optional CTE settings supported by controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Remove is_enabled flag in LLL of BIS events context, as the
status returned from ticker_stop interface is sufficient to
determine if the Broadcast ISO Sync was established or not.
HCI Command Disallow as reason is to be returned if sync was
not established or sync was loss prior to call of HCI LE
BIG Terminate Command was called.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move lll_sync_iso.h as common to all vendors, as currently
there is nothing that is vendor specific.
Fixes#31044.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Leftover from old renaming commits. This function is not private and
should not start with underscore.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
When there are more timing_stop() calls then timing_start(),
the reference counter will go negative, resulting in the next
timing_start() call not starting the timer. Without timer
running, getting cycles elasped would not work. So fix
the ref counting so it won't dip below zero.
Fixes#30397
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If there are multiple interfaces a change to the timeout for one
cannot determine the correct delay until the next timeout event. That
can be determined only by checking for the next event over all
interfaces, which is exactly what's done by the timeout worker.
Refactor interface timeout configuration to just set the start time
and request time, and trigger the worker to calculate the next
scheduled event.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When a renewal occurs the client enters RENEWING, sends a request,
then sets a short timeout (about 4 s) for the response. In the common
case the response will arrive immediately, which will trigger an
attempt to reset the timer with T1 which is generally large.
However the check for updating the timer performs the update only if
the new deadline is closer than the currently set one. Thus the timer
fires at the time the RENEWING request would have been retransmitted,
and only then updates to the correct deadline (T1) for the current
machine state.
Remove the extra timeout by unconditionally setting the timeout to the
new value.
This works when there is one interface; it could be wrong if there
were multiple interfaces one of which had a closer deadline, but
multiple interfaces are mishandled anyway and will be fixed next.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When there is only a single interface the timeout infrastructure can
correctly calculate time to next event, because timeouts only occur
when an event for that interface is due. This is not the case when
multiple interfaces are present: the timeout is scheduled for the next
event calculated over all interfaces.
When calculating the next event for an interface where the timeout is
not due the current code returns the original absolute delay
associated with its current state, without accounting for the time
that has passed since the start time.
For example if interface A's T1 is 3600 s and is due at 3610, but at
3605 a timeout for interface B occurs, the contribution of A to the
delay to the next scheduled event would be 3600 rather than 5,
preventing the renewal from occurring at the scheduled time.
Fix this by replacing the boolean timed-out state with the number of
seconds remaining until the interface event will occur, and
propagating that through the system so the correct delay over all
interfaces can be maintained.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
If send_request() fails it would return UINT32_MAX as the next
timeout. Callers pass the returned value to update_timeout_work
without validating it. This has worked only because
update_timeout_work will not set a timeout if an existing timeout
would fire earlier, and the way the state is currently structured it
is likely there will be an existing timeout. However, if work thread
retransmission from REQUESTING failed the timer would not be
rescheduled, causing the state machine to stop.
A more clean solution, which matches the behavior of send_discover(),
is to return the timeout for the next transmission even in the case
when the send fails. The observed behavior is the same as if the
network, rather than the sender, failed to transport the request.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
A variable named "timeout" is used to represent the current time in
comparisons against timeouts calculated from a start time and an
interval. Since this current time is not the timeout change its name
to "now" to reduce maintainer confusion.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
If assertions are disabled the send operation would continue on to
transmit a message. Stop it from doing so.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The flag value UINT32_MAX is returned from manage_timers() when a send
operation did not succeed. This indicates that the timeout should not
be rescheduled, but because it will never replace the starting update
value UINT32_MAX-1 the check will never pass, and in cases where it
should work will be submitted to run at UINT32_MAX-1 seconds.
Fix the upper bound.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When a connection is lost the client will first attempt to renew, and
then to rebind, and finally to select. Options like gateway may have
been provided by the original connection, but not the new connection,
resulting in an inconsistent configuration for the new network.
Remove the partial state clearing when entering INIT, and expand the
state cleared when entering SELECTING to be more comprehensive.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The start time is negative only if the interface came up in the the
first milliscond since startup; even then changing the sign of the
start is not appropriate. Presumably a left-over from signed 32-bit
timestamps.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
It is documented that using transient information like whether a work
item is pending or a delayed work item has time left to determine the
state of the work item before subsequent reconfiguration is prone to
race conditions, and known to produce unexpected behavior in the
presence of preemptive threads, SMP, or use of the work item from
interrupts. As a best practice such pre-validation steps should be
avoided unless algorithmically necessary.
All comparisons of remaining delayed time before canceling a delayed
work item in this module appear to be optimizations subject to the
above race conditions. Remove the checks so that only the inherent
race conditions in the implementation of canceling a work item remain.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When using BT_GATT_AUTO_DISCOVER_CCC if the ccc_handle is not set
bt_gatt_subscribe would initiate a discovery to locate the CCC handle
but instead of awaiting it to complete the code does proceed to call
gatt_write_ccc even with ccc_handle being 0x0000 which is invalid.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use the devicetree filesystem bindings to populate an fs_mount_t
object that is preconfigured for a particular set of file system
properties on a specified partition.
At this time the mount point data is accessed by reference using the
partition's devicetree node identifier.
Note: While a file system can register itself before its devices
are available, it cannot do the automount. In this commit the
initialization priority is increased to compensate, but that's not
a long-term solution.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Make generally available the macro that provides the flash device in
which a particular partition can be found.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
With this patch the resolver module can resolve literal IPv6
and IPv4 addresses even when DNS client is not presnet in
the system.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Refactor the file structure for USB DFU class to facilitate
separate PID for USB DFU when in DFU mode. As required by USB DFU
1.1 Section 2, the PID in the USB device descriptor must be
different between the Run-time and DFU mode device descriptor to
avoid problems caused by the host OS caching the remaining
descriptors when switching to DFU mode, thus hiding the new
interface descriptors from applications on the host and reporting
the Run-time descriptors when the device is in DFU mode.
To avoid adding too much clutter to the root USB class Kconfig and
CMakeLists files, move the DFU class files into their own directory
with dedicated Kconfig and CMakeLists.txt.
Signed-off-by: Michael Rosen <michael.r.rosen@intel.com>
The USB device descriptors for DFU mode should only change after a
USB reset, not in appDETACH as the device is still in run-time mode
until reset; thus should still return the run-time descriptors when
requested.
Signed-off-by: Michael Rosen <michael.r.rosen@intel.com>
In accordance with USB DFU 1.1 Section 5.1, a device should only
stay in appDETACH for a given period of time, either from the
DFU_DETACH request (wValue ms) or from the wDetachTimeout property,
after which the device should return to appIDLE.
Signed-off-by: Michael Rosen <michael.r.rosen@intel.com>
We have convenient PHY_1M, PHY_2M and PHY_CODED symbols defined but
they are not used too much in the code. This replaces all usages of
magic numbers and other symbols as PHY constants with those symbols.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Adds an assert on the "old" ref counter when doing unref, that
checks if there indeed is a reference to unref. This prevents
any underflows of the ref counter.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Implements the ull_sync_iso_setup function which starts the
ticker for ISO sync. Furthermore, ll_big_sync_terminate
will not stop the ticker as well.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Implements handling of the BIG sync commands in the ULL.
LLL support and handling of ACAD (biginfo) remaining.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adjust the PPI used by nRF51x and nRF52x so that PPI 0-5 is
available for application's use or for SW PWM driver use.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Under CONFIG_BT_TICKER_EXT configuration, the ticker interface has been
extended to support enabling/disabling must-expire scheduling. This
means that conn and slave ticker start calls can now omit must-expire
default-on configuration, relying on LLL updating the mode as needed.
Signed-off-by: Morten Priess <mtpr@oticon.com>
The idle, when power management is enabled, requires system clock to
be present.
This commit adds dependency, to PM option, on SYS_CLOCK_EXISTS.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Convert drivers to DEVICE_DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert drivers to DEVICE_DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit replaces the 'select SHELL' statement with
'depends on SHELL' in OPENTHREAD_SHELL config option.
This ensures, that shell will not be implicitly enabled
when OpenThread stack is built.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
During recent upmerge OPENTHREAD_CONFIG_PLAT_LOG_FUNCTION__COUNT_ARGS
macro was renamed to OPENTHREAD_CONFIG_PLAT_LOG_MACRO_NAME__COUNT_ARGS
but the code wasn't updated where the macro is actually used.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Align bt_le_per_adv_sync_get_index, bt_conn_index and
bt_le_ext_adv_get_index in use of uintptr_t.
This fixes an issue where the cast to uint8_t happened before the
assert for a valid index, which could lead to invalid pointers passing
this assert.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Improve logging of pairing procedure when it fails with error code
unspecified. Since this is returned in many places debugging this
failure is not easy without adding additional debugging.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix parallel pairing procedures using LE SC requiring the DHKey
calculation at the same time. This would otherwise end all other
pairing procedures with the SMP error code "unspecified" since
the call to bt_gen_dh_key would fail.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Set the allowed command bitmask before sending the SMP packet. This
avoids a race-condition in case the sending of the PDU made the
current thread not ready and would not be scheduled back in time
to set the bit before receiving the next SMP packet.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Improve multiple DHKey handling by allowing the next DHKey calculation
to be started in the dhkey ready callback.
Return error code EALREADY if the provided callback is the current
callback generating the DHKey.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
We allocate nodes on receiving AUX_CONNECT_REQ, but we can only use
them if AUX_CONNECT_RSP is sent successfully. If that fails, we need
to release those nodes.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
If we allocate a node in LLL and it turns out that we don't need it
(e.g. allocated connection on AUX_CONNECT_REQ, but connection handshake
did not complete and we don't need it) we still need to send it to ULL
to be released. We can use existing NODE_RX_TYPE_DC_PDU_RELEASE node
type for this purpose, but we just need to make sure it's passed from
LLL to ULL properly.
Also, since this now does not only release DC PDUs, let's change its
name to a more generic one.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
After slave connection is created only adv instance is stopped, we also
need to stop aux separately if enabled.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Make sure phy is properly initialized to 1M when ext adv is supported
and legacy advertising instance is being enabled.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This adds handling for received AUX_CONNECT_REQ PDU which enables slave
connection with extended advertising.
Once AUX_CONNECT_REQ is received, standard checks are performed to
determine if we have resource to create connection, however unlike for
CONNECT_IND an rx node is temporarily kept in LLL until AUX_CONNECT_RSP
is successfully sent. This is to prevent creating a connection in case
response PDU was not sent for whatever reason.
A separate scratch buffer is created for AUX_CONNECT_RSP since default
radio scratch buffer is already used by received AUX_CONNECT_REQ.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Connection structs need to be initialized when advertising is enabled
on connectable extended advertising instance.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Connection created from extended advertising instance uses the same phy
as on secondary channels.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
transmitWindowDelay is either 2.5ms or 3.75ms when AUX_CONNECT_REQ is
used (for 1M/2M and Coded respectively). It also uses the same unit
as transmitWindowOffset (1.25ms) so we can just simply add both.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
The same helper will be used for legacy and extended advertising so we
better pass AdvA and TargetA directly instead of complete advertising
PDU. This is because those fields are at different locations in legacy
and extended advertising PDUs so caller can figure them out.
Also, we can now check for directed advertising using TargetA since it
will be only supplied for such advertising (NULL otherwise).
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Release the LF clock requested in blocking mode used to wait
to settle, which has already been asynchronously requested.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix lll_clock_wait function to wait for LF clock to settle
only once after power up.
Regression introduced in commit 2b4763076e ("bluetooth:
controller: Adapt to onoff clock control").
Fixes#30480.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Clean up included header files, remove including
zephyr/types.h and other deprecated or redundant
header files.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Reordering of the struct elements to match the Linux format.
The __packed() is not necessary anymore.
std_id and ext_id is merged to id in the frame and filter.
Additionally, the frames are ready for CAN-FD.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
The previous API can't change the sampling-point and only allowed
bitrates that fit the time segments.
The new API allows for shifting the sampling-point and adjusts the
number of time quantum in a bit to all more possible bitrates.
The functions to calculate the timings are moved to the can_common file.
They can be used for all drivers.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
If the SRC field of the received message is a unicast
address of an element of the Low Power node, then the
message shall not be stored in the Friend Queue.
Otherwise, lpn will discard this message, eventually
it breaks friendship.
Fixes: #30657
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
If getaddrinfo() was called with AI_PASSIVE flag in hints,
returned address defaulted to SOCK_STREAM and IPPROTO_TCP.
Fixed so that SOCK_DGRAM leads to correct address type
that can be fed to bind() directly.
Same hard coding was visible when numerical IPv4 address string
was converted to binary. That is also fixed to respect hints now.
Also, added functionality to get IPv6 address, when hints contained
AF_INET6.
Fixes#30686
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Validate the disconnect reason in the disconnect command, according
to the the core specification.
7.1.6 Disconnect command:
Authentication Failure error code (0x05), Other End Terminated Connec-
tion error codes (0x13 to 0x15), Unsupported Remote Feature error code
(0x1A), Pairing with Unit Key Not Supported error code (0x29) and Unac-
ceptable Connection Parameters error code (0x3B).
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Return the error code from the disconnect command to the application
when an invalid disconnect reason has been provided.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
When needing to lock non-connection related access, use k_mutex
instead of locking irq. There is really no reason to prevent the
system from generating interrupts.
Fixes#30636
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add thread runtime statistics to the thread analyser.
With CONFIG_THREAD_RUNTIME_STATS enabled:
Booting from ROM..*** Booting Zephyr OS build zephyr-v2.4.0-2330-g77be0e93e65b ***
thread_a: Hello World from cpu 0 on qemu_x86!
Thread analyze:
thread_b : STACK: unused 740 usage 284 / 1024 (27 %); CPU: 0 %
thread_analyzer : STACK: unused 8 usage 504 / 512 (98 %); CPU: 0 %
thread_a : STACK: unused 648 usage 376 / 1024 (36 %); CPU: 98 %
idle 00 : STACK: unused 204 usage 116 / 320 (36 %); CPU: 0 %
thread_b: Hello World from cpu 0 on qemu_x86!
thread_a: Hello World from cpu 0 on qemu_x86!
thread_b: Hello World from cpu 0 on qemu_x86!
thread_a: Hello World from cpu 0 on qemu_x86!
thread_b: Hello World from cpu 0 on qemu_x86!
thread_a: Hello World from cpu 0 on qemu_x86!
thread_b: Hello World from cpu 0 on qemu_x86!
thread_a: Hello World from cpu 0 on qemu_x86!
Thread analyze:
thread_b : STACK: unused 648 usage 376 / 1024 (36 %); CPU: 7 %
thread_analyzer : STACK: unused 8 usage 504 / 512 (98 %); CPU: 0 %
thread_a : STACK: unused 648 usage 376 / 1024 (36 %); CPU: 9 %
idle 00 : STACK: unused 204 usage 116 / 320 (36 %); CPU: 82 %
thread_b: Hello World from cpu 0 on qemu_x86!
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add new shell module for mcuboot enabled application. It provides
information about image slots and allows to perform such operations as:
confirm, erase and request upgrade.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
is_rodata() can now determine if an object is the rodata section
on SPARC. This eliminates spurious run-time error messages about
"missinglog_strdup()".
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
