When initiating a disconnection conn_disconnect would be called to send
HCI_Disconnect but the controller may be quick enough to send Disconnect
Complete event before setting BT_CONN_DISCONNECT which will then cause
the invalid transition from BT_CONN_DISCONNECTED to BT_CONN_DISCONNECT
and the connection won't be freed properly.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes a regression introduced by 4350021f09 which prevents
references to be properly release when there is an ISO connection.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
net_eth_carrier_on() and net_eth_carrier_off() call k_work_init() on
work item that can be pending or still be processed in another thread.
This results in undefined behavior.
Initialize work item once and use an atomic flag to switch between
up/down carrier state. Submit work to workqueue whenever up/down carrier
state changes, so that last state is always properly propagated to
network interface layer.
While at it, save network interface pointer during ethernet context
initialization, so that is becomes static (and thread-safe) during whole
ethernet context lifetime.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
net_ppp_carrier_on() and net_ppp_carrier_off() call k_work_init() on
work item that can be pending or still be processed in another thread.
This results in undefined behavior.
Initialize work item once and use an atomic flag to switch between
up/down carrier state. Submit work to workqueue whenever up/down carrier
state changes, so that last state is always properly propagated to
network interface layer.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Zephyr already has a directory for storage API relevant headers.
Move disk_access.h header to include/storage where it fits better
structurally.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The files disk_access_usdhc.c, disk_access_spi_sdhc.c,
disk_access_stm32_sdmmc.c, disk_access_ram.c and
disk_access_flash.c are actually drivers for block devices and SD/MMC
controllers. This patch moves this drivers to drivers/disk and
reworks the configuration so that the drivers are selected when
the corresponding node is enabled.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Without this fix, ztest_set_assert_valid() can only be used when
CONFIG_ZTEST_FATAL_HOOK is set.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Remove legacy TCP stack as it is replaced by the new TCP2 stack.
The TCP2 stack has been the default stack since 2.4 release.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit implements the secondary service
Volume Offset Control Service (VOCS) server and client.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added recovery for case when log file was lost somehow.
Back-end will try to create new file if possible.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
New backend is based on littleFS. After init, there is created new file
with continuous numeration. When max size of file is reached, system
creates another one. File size is limited by Kconfig option.
There is possibility to overwrite old files or drop new ones.
FS backend logging to file if the FS location is available.
Otherwise log messages are drooped.
User can also change the name of log files.
Signed-off-by: Mateusz Syc <Mateusz.Syc@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <Andrzej.Puzdrowski@nordicsemi.no>
Currently notification about exiting an idle state is sent before
post_ops and with interruptions locked. Change it to be sent after
exit_pos_ops callback be called.
Unfortunately it is not possible to just change the order these
functions are called since the idle thread can be scheduled out just
after irqs be unlocked and before has the chance to send the
notification, so we are locking the scheduler and unlocking it only
after the notification be sent.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The kernel expects irqs be unlocked after this function be called.
Add it to the weak function in case of the SoC or application has not
implemented it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Allow callers to wait for an arbitrary amount of time, instead of always
waiting for a compile-time fixed period.
Signed-off-by: Josh Gao <josh@jmgao.dev>
This feature predated the tickless kernel and has been in legacy mode
for a while. We now have no drivers or systems that do not support
tickless, so remove this option and cleanup the code to only use
tickless.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is another API that is being used in all timer drivers and is not
internal to the clock subsystem. Remove the leading z_ and make promote
it to a cross-subsystem API.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The clock/timer APIs are not application facing APIs, however, similar
to arch_ and a few other APIs they are available to implement drivers
and add support for new hardware and are documented and available to be
used outside of the clock/kernel subsystems.
Remove the leading z_ and provide them as clock_* APIs for someone
writing a new timer driver to use.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Let the core call the modbus_tx_adu() to make
the process more comprehensible.
Move tx-wait-for-rx handling outside of client code.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Prefix internal functions and structs with modbus_.
Use unit_id consistently instead of node_addr.
Fix mbm_ remainder and rename to mbc_.
Rename struct modbus_frame to modbus_adu since
ADU is closer to what the structure represents.
Let the compiler/linker do the job and
remove ifdef around mbc_validate_fc03fp_response().
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add function to get Modbus RTU interface index according
to interface name. This can be used to clearly identify
interfaces in the application.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add support to control DE/nRE RS-485 transceiver signals
over GPIO pins. Useful if the UART controller does not
support RS-485 mode.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add MODBUS RTU (over serial line) subsystem.
MODBUS RTU implementation supports booth server and
client roles. Some components of the implementation are based
on the uC/Modbus stack, which was published under Apache license,
(https://github.com/SiliconLabs/uC-Modbus
fdd1218a28e313c1212fed5ed42e5c65d3056a2c).
Resolves: #2854
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
The SD Card Physical Layer specification states in Table 7-1
(in section 7.3.1.1) that the LSB of the 48 bit command must
be set to 1 to act as an 'end bit'.
Fixes#33479
Signed-off-by: Rich Barlow <rich@bennellick.com>
Kconfig option USB_HID_PROTOCOL_CODE does not allow to set
boot interface protocol code for specific HID device but
only to set the same value for all device.
Add new API function to allow the application to set
Protocol Code per device. Deprecate USB_HID_PROTOCOL_CODE option.
Fixes: #32778
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Fix control Tx buffer leak into data Tx pool that happens
after a cross-over control procedure response was paused due
to currently active encryption setup procedure, and a new
control Tx PDU in addition to the paused one is enqueued
thereafter.
When the control tx PDUs is resumed but not yet enqueued
towards the radio, if there is a new control Tx PDU enqueued
then the paused control Tx PDU is not set as the head of the
control PDUs in the Tx queue. This caused the paused control
Tx PDU to be associated with data Tx pool, hence causing the
incorrect release into data Tx pool.
Relates to the commit bff76b4cce ("Bluetooth: controller:
split: Fix control tx queue handling") and to the
commit 6991d09977 ("Bluetooth: controller: Fix control tx
queue handling").
Fixes#32898.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove the redundant connection initiated check as the event
is closed on connection initiated and it is sufficient to
check in the prepare_cb function to abort any events in the
pipeline after the connection has been initiated.
Relates to commit 5ce5dc055e ("Bluetooth: controller:
Avoid race between ULL and LLL when initiating conn") and
commit 18f5fb99c1 ("Bluetooth: controller: Remove use of
lll_stop").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Building this file with CONFIG_COVERAGE=y and CONFIG_SHELL_LOG_BACKEND=n
fails on the llvm-clang compiler. Swapping the IS_ENABLED and
log_backend allows the compiler to optimize out the if block even with
coverage enabled.
Signed-off-by: Jeremy Bettis <jbettis@chromium.org>
Use the channel identifier calculation function in the
central and peripheral implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added function to calculate channel identifier value
required for Channel Selection Algorithm #2.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The payload of the Register/Register Update message is also formatted as
application/link-format. Therefore it's reasonable to reuse the new
content writer instead of filling the payload manually.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit adds a new content writer, application/link-format, which
can be used during the Discovery procedure, to fill the content of the
response payload.
Introducing this new content writer, which encapsulates some of the
details like attribute handling which is different for bootstrap/regular
discovery, allows to unify the discovery handler in the lwm2m_engine,
thus it's no longer needed to have spearate handler functions for
bootstrap/regular discovery.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
`.well-known/core` resource is described by the CoAP RFC as an optional
method of resource discovery. The LwM2M specification though makes no
mentionon about this mechanism and provides an alternative method of
resource discovery instead (Device Management Discover, sec 5.4.2, and
Bootstrap Discovery, sec 5.2.7.3).
Since LwM2M does not require to implement `.well-known/core` resource
and it complicates the existing Discovery mechanism (and likely cause a
security concern) remove its handling from the LwM2M implementation.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Introduce LwM2M engine helper functions that allows to work with LwM2M
attributes outside of lwm2m_engine.c.
This is a groundwork for application/lwm2m-format content writer.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There's no need to duplicate the linker section for each architecture.
Instead, move the section declaration to common-rom.ld.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The exported structures that were originally introduced for OpenOCD have
since then been reused for other debugger plugins, including PyOCD and
Segger J-Link.
Rename the Kconfig option and the implementation from openocd to debug
thread info, so that it reflects the fact that this is no longer
specifically tied to OpenOCD.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
A bunch of commands were missing from the bitmap in the Read Local
Supported Commands response. Add them accordingly.
Fixes#33324.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Ignore connection indications from peers that are already
connected. This is to bring the behavior of the controller in
accordance with [5.2, Vol 6, Part B, 4.5 Connection state]:
"If an advertiser receives a connection request from an initiator it
is already connected to, it shall ignore that request."
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Rename the peer's address in the advertising set struct from `id_addr`
to `peer_addr` to clarify what the address refers to.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
When recvfrom() was called with src_addr != NULL, then source address
was fetched from beginning of net_pkt. This works with native IP stack
obviously. However with offloaded IP stack there is no IP header, so
trying to parse missing IP header results in undefined behavior.
Check if network interface has offloaded IP stack. If positive, then
figure out if there is assigned remote address to network context on
which packet was received. Return this remote address, which SHOULD be
the source address of received packet. Otherwise, return an error.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Fix regression is central only builds when CONFIG_BT_PRIVACY and/or
CONFIG_BT_EXT_ADV is enabled, or the functions bt_id_reset or
bt_id_delete is called from application.
This resulted in build error for undefined functions
bt_le_ext_adv_foreach and bt_le_adv_lookup_legacy since the definition
for these functions are now only compiled in when CONFIG_BT_BROADCASTER
has been enabled.
Regression from:
53cea4719d
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix CONFIG_BT_HCI_ACL_DATA_SIZE default value set to 0 when data length
feature in the controller is not enabled. In this case the default value
will be set to 0 which is outside of the range specified for the option.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move access to volatile variable out of assertion to avoid warnings
about side effect in assertion.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Add hci_driver.h to include files in id.c to ensure that prototype for
bt_read_static_addr is visible. This fixes builds that define
CONFIG_BT_CTLR but not CONFIG_BT_HCI_VS_EXT.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
HID core implementation has support for Get/Set Idle requests and
on idle report processing. Basically it has little use.
Also, it has no users in the tree except samples/subsys/usb/hid,
which does not have it turned on.
There are several issues with the idle report implementation:
- Core calls hid_ops.on_idle callback with Report ID 0,
but this ID is reserved and should not be used.
Report descriptors do not use Report ID index zero.
- Calling hid_ops.on_idle with Report ID 0 cann only
be turned off by calling SetIdle(Duration = 0, Report ID = 0),
but not by SetIdle with Report ID not equal zero.
- GetIdle with Report Id not equal zero returns wrong
value after SetIdle(Duration = n, Report ID = 0)
- It may happen that hid_ops.on_idle is called for
different Report ID during one and the same SoF event.
But there can be only one hid_int_ep_write() during a frame.
This patch fixes listed issues and revises Get/Set Idle request,
and hid_sof_handler() implementation.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Moved the call to obj_id_to_index such that we can check for valid
ID before getting the index.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds a ots_obj_manager function that returns true if the object is
in the object manager, or false otherwise.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The directory listing object is an internal object which
content is the aggregation of all the metadata of all objects
(including the directory listing object itself). The client
can read this value to get a list of all objects with names,
lengths, and other metadata.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The order of Destination CIDs shall correspond the order of Source CIDs
including its amount so errors that don't result in all connection being
refused shall not break the order of CIDs.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
For errors that means all connections have been refused there is no need
to add dcids since none will be valid.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When receiving L2CAP_CREDIT_BASED_CONNECTION_REQ the remote may request
more channels than allowed so this checks if amount of channel surpasses
the maximum channels (5) and return an error.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Adds a Proxy callback structure with a callback for Node ID enable and
disable. This API follows the Friend and LPN API pattern in mesh/main.h,
and can be expanded with more callbacks later.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Fix an assertion when disabling Extended Advertising with
auxiliary PDUs. Stop the auxiliary PDU scheduling after the
primary PDU scheduling is stopped first. This will avoid the
assertion caused due to a search for a stopped auxiliary PDU
offset by the primary PDU scheduling that is being stopped.
Fixes#32866.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When using `OPENTHREAD_ECDSA` deterministic variant has to be
enabled after some OpenThread changes. Also generic public key
functions are required.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Add locking when accessing interface list and the DHCPv4 config
struct that is found in net_if.
Fixes#33348
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to do a few things differently if we are to support
a virtual memory map, i.e. CONFIG_MMU where CONFIG_KERNEL_VM_BASE
is not the same as CONFIG_SRAM_BASE_ADDRESS.
- All sections must be specified with a VMA and LMA, where
VMA is the virtual address and LMA is the physical memory
location.
- All sections must be specified with ALIGN_WITH_INPUT to
keep VMAs and LMAs synchronized
To do this, the existing linker macros need some adjustment:
- GROUP_LINK_IN undefined when CONFIG_KERNEL_VM_BASE is not
the same as CONFIG_SRAM_BASE_ADDRESS.
- New macro GROUP_ROM_LINK_IN for text/rodata sections
- New macro GROUP_NOLOAD_LINK_IN for bss/noinit sections
- Implicit ALIGN_WITH_INPUT for all sections
GROUP_FOLLOWS_AT is unused anywhere in the kernel for years
now and has been removed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Replace a development assertion in the implementation of
Connection Parameter Request Procedure with an internal
comment and handle transaction violation be ignoring the
PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the leak of node rx buffer used to generate the
connection complete and CSA#2 event introduced in the
commit 4a5f263e5a ("Bluetooth: controller: split: Validate
chan map and hop value") and the
commit 94d5f0854e ("Bluetooth: controller: fixing error
re. all zero chmap in conn-ind").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Switch to the new API for delayed work related to DNS queries.
In the previous solution it was assumed that the work item could be
immediately cancelled at the point the query slot was released. This
is not true. We need a secondary condition to record the fact that
the query was completed while the work item was still pending, and an
additional check to detect when the work item completed and the slot
reclaimed.
Also annotate functions to indicate when they require the lock on
query content to be held, add some helpers that abstract core
operations like invoking a callback or releasing a query slot, and fix
some more cases where query slot content was accessed outside of the
new lock infrastructure.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Instead of silently closing the link we should send a Link Close message
three times before resetting provisioning state.
From Mesh Profile Specification v1.0.1.:
```
5.3.1.4.3 Link Close message
The Link Close message is used to close a link.
```
```
5.3.2 Link Establishment procedure
The device shall start the link timer, set to 60 seconds, when the link
is open. When the link timer expires, then the device shall close the
link.
```
```
5.3.3 Generic Provisioning behavior
If the sender does not receive a Transaction Acknowledgment message
within 30 seconds after sending the first message in a transaction,
the sender shall cancel the transaction, cancel the provisioning
process and close the link.
```
From Mesh Profile Test Specification p6:
```
MESH/PVNR/PBADV/BV-01-C
Test Procedure:
[...]
6. The IUT is induced to send a Link Close message with the Reason field
set to 0x02 to terminate the link. The message is sent at least three
times to ensure the message is received by the Lower Tester.
```
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Refactor out the BR/EDR handling from hci_core.c to its own source file
in br.c.
BR/EDR consists of inquiry and discovery roles in addition to
initialization. SSP is still kept separate.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Align the SSP HCI event handlers with the rest of the functions in using
the bt_ prefix. In order to avoid name conflict with the HCI struct
definitions the infix _evt_ has been dropped.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix compilation error with BR/EDR is enabled but the feature
CONFIG_BT_KEYS_OVERWRITE_OLDEST is disabled.
This caused compilation error because the field aging_counter is not
defined in the keys struct.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor out the advertiser roles handling from hci_core.c to its own
source file in adv.c.
Advertising roles consists of legacy and extended advertiser, and
periodic advertiser.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor out the scan roles handling from hci_core.c to its own source
file in scan.c.
Scan roles consists of regular scanning and synchronization to
periodic advertiser.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Don't include checks for advertiser is enabled when the broadcaster role
is not enabled. This makes it possible to have bt_le_ext_adv_foreach
be excluded from the compilation.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor out the identity handling from hci_core to its own source file
in id.c
Identity consistes of managing the identities of the device, the privacy
feature which hides the identities. And handling of the identity
resolving list in the controller, needed to support privacy-enabled
remote devices.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor the code so that bt_adv_lookup_legacy is always called after
the IS_ENABLED(CONFIG_BT_BROADCASTER) configuration has been checked and
the code path will be excluded.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor command state state handling to one function.
When setting state outside of hci_core the cmd macro is not available,
so in order to assign the buf pointer to state the function is needed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
There was no close method implemented for AF_PACKET type
sockets. This meant that calling close() on packet socket
caused NULL pointer access.
This will allow #32949 issue to work properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
OpenThread UART tx callback has been processed even if it was not
triggered by OpenThread otPlatUartSend function.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
This new subsystem can be used to supervise individual threads. It
is based on a regularly updated kernel timer, whose ISR is never
actually called in regular system operation.
An existing hardware watchdog can be used as an optional fallback if
the task watchdog itself gets stuck.
Signed-off-by: Martin Jäger <martin@libre.solar>
Some devices may use different reference than cpu clock. Add
support for using swo-ref-frequency property when present.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Change fixes an issue related to data access out of array bounds and
suppresses compiler warning.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Implement MSG_WAITALL flag for stream sockets. Setting this flag on
`recv()` call will make it wait until the requested amount of data is
received.
In case both, MSG_WAITALL all is set and SO_RCVTIMEO option configured
on a socket, follow the Linux behavior, i. e. when the requested amount
of data is not received until the timeout expires, return the data
received so far w/o an error.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add the option CONFIG_BT_HCI_ACL_DATA_SIZE which allows the user
to configure the max HCI ACL data payload. This is needed for platorms
where the BLE LL, HCI uart and host run on three different cores.
Fixes: #30441
Signed-off-by: Johan Stridkvist <johan.stridkvist@nordicsemi.no>
Overwrite the existing bond when the IRK of the existing bond could not
resolve the RPA of the peer. This would happen if the peer has deleted
the bond and replaced the IRK that was used.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor update_keys_check helper function to operate on input keys
input. This allows the function to be re-used on a keys structure that
is not the current connection keys.
This also avoids the helper function changing the connection state.
The conn->le.keys pointer should at this point always have been
assigned, as central when sending the pairing request, and as peripheral
when receiving the pairing request at the very latest.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The Health Fast Period Divisor is stored within
the model publish parameters on the access layer.
The opposite part for divisor restoring has been missed.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Adds the const qualifier to the internal api for adding and removing
virtual addresses, to allow them to accept const hardcoded values in
tests.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Moves the debug log printing the transport packet metadata to after the
keys are resolved, so that the subnet pointer is valid.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Adds a "polled" function to the friend callback structure, that gets
called every time the friend receives a poll message. The polled
callback is called before the establish callback, to match the LPN
behavior.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
If there is no timeout, the connect will timeout immediately
and the connection is not established.
Fixes#33185
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add execution time for testing result of each ztest testcase as:
START - test_sem_multi_take_timeout_diff_sem
PASS - test_sem_multi_take_timeout_diff_sem in 2.54 seconds
Fix#32137.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
The SCA (sca) field of bt_iso_chan_qos did not give much
information about the expected values or what they meant,
nor any information about what the value perhaps should be.
Updated the description and the ISO shell.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
To prevent the transport layer from accepting duplicate or out of order
segmented messages, add an RPL-like check for the SeqAuth of the
segmented messages when their context is allocated. This prevents
duplicate receives of the same segmented messages in the case where a
single source address sends two segmented messages in parallel (to two
different addresses):
Previously, when receiving two segmented messages, the first message
would go through to the access layer, then the second. Then, if the
transport layer received any repeated segments for the first message, it
would fail to identify the SeqAuth as old, as all its segments were of
new sequence numbers, and the "already complete SDU" check would only
look at the second message. Thus, the segmented message got processed
again and passed to the access layer, even though it was a duplicate.
To solve this, we need a mechanism like RPL, but only for the segmented
messages' SeqAuth. We cannot re-use the actual RPL mechanism, as it
can't support the scenario provoked by the "blocking tx" mechanism in
transport. This mechanism allocates the SeqAuth when the message is
first passed to the transport layer. The ongoing message that caused the
block would keep sending segments with higher sequence numbers than
the blocked message got, which will cause the blocked message to fail
the RPL check.
This patch adds a parallel SeqAuth mechanism to the RPL module, which
only deals with the SeqAuth of the segmented messages. This list gets
checked when the segmented message is first allocated, in the same
manner as the general RPL mechanism. The storage gets hooked into the
RPL mechanism, by adding a separate seg field to each RPL entry.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
DHCPv4 client code needs to know information when network
interfaces are going down and up. So make sure that network
management config options are enabled in that case.
Fixes#33137
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When Extended Advertising terminated due to duration or
maximum number of events, the auxiliary PDU scheduling
is now correctly stopped.
Fixes#31254.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add option to disable validation callback support by setting the
validation buffer size to 0, which allows to save some memory in case
it's not needed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a data validation callback to the resource structure, which can be
registered by an application. It allows to verify the data before
actually modifying the resource data.
If the callback is registered for a resource, the data is decoded into a
temporary buffer first, and only copied into the actual resource buffer
if the validation is successfull. If no validation is required (and thus
no callback registered) the resource value is decoded directly into the
resource buffer, as it used to be.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Mention that it's "data offset" in 32-bit words. Helpful when doing
code review and using search for "th_off".
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Replace the legacy delayed work API with the new delayable work API.
Avoid cancelling work and manually notifying when the subscription is
disabled; instead allow the work item to do this.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Replace the legacy delayed work API with the new delayable work API.
Use a zero period as a flag value to ensure that the work handler is a
no-op of the publish operation is disabled.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Switch to new work API, taking advantage of the difference between
schedule and reschedule to force an update if the new deadline is
sooner, and retain any previous deadline (or use the new deadline) if
it isn't. Do not leave a path out that could, due to races, fail to
schedule necessary work.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
A previous check and return for (maxlen <= 0) makes manlen at least 1 so
checks for (maxlen < 1) would never evaluate to true. Remove these
checks and merge those cases into one.
CID: 215392
Fixes: #33092
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
If CONFIG_NET_TCP_ISN_RFC6528 is disabled, then mbedtls include
files are not available so check this.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Switch to new work API. Avoid a racy cancel by allowing the work
handler to deal with an immediate off when the time remaining changes
to zero.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Previously, a racing write to the provided metadata could result
in up to CONFIG_LOG_STRDUP_MAX_STRING-2 bytes after the
end of user-accessible memory being leaked into the strdup pool
or the resulting log.
For now, explicitly copy the metadata string. In an ideal world
this could directly copy from userspace into the strdup buffer, but
this obviously only works if strdup is enabled.
Signed-off-by: James Harris <james.harris@intel.com>
Verify the result of option encoding while forming Deregister message
instead of silently ignoring it.
Coverity ID: 215373
Fixes#33096
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Added initial support for BIS (broadcast ISO stream), which
adds support for creating BISes as both broadcaster and receiver,
as well as managing and creating BIGs.
Extends PA sync to handle BIGInfo adveritising reports.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If CONFIG_LOG_IMMEDIATE=n, go to panic mode with LOG_PANIC() so full
coredump is logged.
Add missing log_strdup() call.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Calculate Initial Sequence Number (ISN) as described in RFC 6528
https://tools.ietf.org/html/rfc6528
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
k_work_pending is now called k_work_is_pending.
These two uses are correct assuming the functions that invoke them are
not involved in race conditions: that the work is not pending is an
allowed condition for modifying state that will be used by the work
handler.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
