Some of the objects redefined reusable resources IDs, while others used
a common header which defines resource IDs. Unify the approach and use
the header in every object.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Each object now have to specify the object version it implements.
Based on this information the LwM2M engine can decide whether it's
needed to report the object version during Registration/Discovery
operations or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If the first network interface is down when the net config init
is run, then the IP addresses etc would be set to wrong network
interface. So when initializing the network, try to first find
a network interface that is auto started and use that to configure
IP addresses etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When printing network interface information print index or
index + pointer, so that the output is more user friendly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As DAD is not done for point-to-point links, we can mark them
valid immediately. If this is not done, then the address will
never be picked as a source address to a sent packet.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Useful to know what flags are set for the network interface
so print them in the shell by the "net iface" command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This can be used to implement tunneling, VPN etc. The virtual
interfaces can be chained together to support multilayer
network interfaces.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a function that allow caller to create IPv4 header with
possibility to set various fields in the header.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Application can disable IPv4 or IPv6 later if those are not
needed nor used for a given network interface.
Fixes#14581
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
LL_CIS_IND starts a ticker for the created CIG, using the event_counter
and offset provided. Ticker generates callbacks to
lll_peripheral_iso_prepare. Event done with ISO (extra) type is demuxed
and done handled for CIG including ticker update with drift
compensation.
TODO: Handle multiple CISes as well as pause/resume and scheduling
latency.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Implemented LL_CIS_REQ/RSP and LL_CIS_IND handling to allow a central
to establish a CIS connection. Implementation is temporary, for
test/development purpose and should be re-implemented in the new LLCP
framework when ready.
Signed-off-by: Morten Priess <mtpr@oticon.com>
In the file gatt.c, GAP service contains the Device Name
characteristic. If writable, authentication and authorization may
be defined by a higher layer specification.It means that GATT
clients can write to device name GAP characteristic without
bonding. So we add a configuration for writable name without
bonding.
Signed-off-by: Jun Huang <huangjun6@xiaomi.com>
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Adds a check for the BT_LE_FEAT_BIT_PER_ADV bit for each
function related to periodic advertising, including sync and
PAST transfer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
hwinfo_get_define_id returns and ssize_t with the size og the copied
id in case of success or negative value otherwise.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
hwinfo_get_define_id returns and ssize_t. Positive value with the
size of the copied id in success or a negative value in case
of error.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Fix undefined reference to bt_key_foreach when BT_LOG_SNIFFER_INFO has
been enabled but BT_SMP is not enabled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The Configuration Client doesn't check the address in a received
response. This means that a response from any device will be accepted.
This change ensures that the correct response will be accepted.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Init function can be called multiple times (after each shell
reinitialization). It was missing reseting ring buffers and tx_busy
flag. When called once proper state of those variable where handled
by ram sections initialization.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Shell uninitialization is not synchronous, it is deferred to shell
thread so resources used by the shell (e.g. transport resource like
uart) cannot be used until it is completed. Added callback which
notifies when all resources are released and shell is uninitialized.
Callback is called from shell thread just before it is aborted.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The bootutil_public.h, as a part of mcuboot interface, has been
providing the same definitions as mcuboot_priv.h
The commit removed the redundancy.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Move ptp_clock.h out of the top level include/ dir into
include/drivers/ptp_clock.h and deprecated the old location.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In modes where string duplication is not used, the code is
still compiled. On some compilers it was failing due to calling
strncpy which will do nothing because n is 0. Increase
CONFIG_LOG_STRDUP_MAX_STRING to 2 to ensure that n is 1 in that
case
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add Z_SHELL_SET_FLAG_ATOMIC macro to use technique from
shell_process() to atomically set and return the previous
value.
Change all void z_flag_*_set() functions to bool z_flag_*_set()
and use macro to return previous value after setting.
Modify shell_process() to use this modified z_flag_processing_set()
function.
Reorder flags to keep last_nl on byte boundary.
Add public setters for insert_mode, echo, and mode_delete for
completeness.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Add flag to shell_flags to control echo as obscure
character (for passwords) or not. Add setter and getter
functions. Modify shell echo to use this flag if set.
Also add public setter for color mode and obscure mode.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Fix bluetooth audio compilation issue when BT_AUDIO is enabled but
no Bluetooth host services has been enabled.
This leads to an empty library file.
Instead of creating a new library for audio add the sources to the
parent library, similar to how bluetooth services are added.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
VOCS does not support the write long procedure, and thus
should not accept any offset in write requests.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This adds bt_conn_iso function to safely access the struct bt_conn_iso
within a bt_conn.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Channel direction was actually a source of confusion since the spec does
actually define the data path direction from controller point of view
meaning input actually means transmit and output receive, also direction
can be configured with different QoS settings.
To make these APIs less confusing and allow QoS to be configured
independently they are now split into RX (receiving) and TX
(transmission) settings including its data path.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
CHECKIF is preferred as it handles full runtime error handling in
addition to just asserts.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes bt_iso_cleanup when there are still channels bound to the
ACL connection.
On top of it introduce bt_iso_chan_unbind which can be used to unbind
channels and thus release the reference to the ACL connection if that
has not been disconnected in which case the channels are unbind
automatically.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When the channel has just been bound but is not connected yet there is
no need to send any command over the air but the disconnected callback
shall still be called in order to notify the channel owner that it has
reached disconnected state.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When initiating a disconnection conn_disconnect would be called to send
HCI_Disconnect but the controller may be quick enough to send Disconnect
Complete event before setting BT_CONN_DISCONNECT which will then cause
the invalid transition from BT_CONN_DISCONNECTED to BT_CONN_DISCONNECT
and the connection won't be freed properly.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes a regression introduced by 4350021f09 which prevents
references to be properly release when there is an ISO connection.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
net_eth_carrier_on() and net_eth_carrier_off() call k_work_init() on
work item that can be pending or still be processed in another thread.
This results in undefined behavior.
Initialize work item once and use an atomic flag to switch between
up/down carrier state. Submit work to workqueue whenever up/down carrier
state changes, so that last state is always properly propagated to
network interface layer.
While at it, save network interface pointer during ethernet context
initialization, so that is becomes static (and thread-safe) during whole
ethernet context lifetime.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
net_ppp_carrier_on() and net_ppp_carrier_off() call k_work_init() on
work item that can be pending or still be processed in another thread.
This results in undefined behavior.
Initialize work item once and use an atomic flag to switch between
up/down carrier state. Submit work to workqueue whenever up/down carrier
state changes, so that last state is always properly propagated to
network interface layer.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Zephyr already has a directory for storage API relevant headers.
Move disk_access.h header to include/storage where it fits better
structurally.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The files disk_access_usdhc.c, disk_access_spi_sdhc.c,
disk_access_stm32_sdmmc.c, disk_access_ram.c and
disk_access_flash.c are actually drivers for block devices and SD/MMC
controllers. This patch moves this drivers to drivers/disk and
reworks the configuration so that the drivers are selected when
the corresponding node is enabled.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Without this fix, ztest_set_assert_valid() can only be used when
CONFIG_ZTEST_FATAL_HOOK is set.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Remove legacy TCP stack as it is replaced by the new TCP2 stack.
The TCP2 stack has been the default stack since 2.4 release.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit implements the secondary service
Volume Offset Control Service (VOCS) server and client.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added recovery for case when log file was lost somehow.
Back-end will try to create new file if possible.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
New backend is based on littleFS. After init, there is created new file
with continuous numeration. When max size of file is reached, system
creates another one. File size is limited by Kconfig option.
There is possibility to overwrite old files or drop new ones.
FS backend logging to file if the FS location is available.
Otherwise log messages are drooped.
User can also change the name of log files.
Signed-off-by: Mateusz Syc <Mateusz.Syc@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <Andrzej.Puzdrowski@nordicsemi.no>
Currently notification about exiting an idle state is sent before
post_ops and with interruptions locked. Change it to be sent after
exit_pos_ops callback be called.
Unfortunately it is not possible to just change the order these
functions are called since the idle thread can be scheduled out just
after irqs be unlocked and before has the chance to send the
notification, so we are locking the scheduler and unlocking it only
after the notification be sent.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The kernel expects irqs be unlocked after this function be called.
Add it to the weak function in case of the SoC or application has not
implemented it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Allow callers to wait for an arbitrary amount of time, instead of always
waiting for a compile-time fixed period.
Signed-off-by: Josh Gao <josh@jmgao.dev>
This feature predated the tickless kernel and has been in legacy mode
for a while. We now have no drivers or systems that do not support
tickless, so remove this option and cleanup the code to only use
tickless.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is another API that is being used in all timer drivers and is not
internal to the clock subsystem. Remove the leading z_ and make promote
it to a cross-subsystem API.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The clock/timer APIs are not application facing APIs, however, similar
to arch_ and a few other APIs they are available to implement drivers
and add support for new hardware and are documented and available to be
used outside of the clock/kernel subsystems.
Remove the leading z_ and provide them as clock_* APIs for someone
writing a new timer driver to use.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Let the core call the modbus_tx_adu() to make
the process more comprehensible.
Move tx-wait-for-rx handling outside of client code.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Prefix internal functions and structs with modbus_.
Use unit_id consistently instead of node_addr.
Fix mbm_ remainder and rename to mbc_.
Rename struct modbus_frame to modbus_adu since
ADU is closer to what the structure represents.
Let the compiler/linker do the job and
remove ifdef around mbc_validate_fc03fp_response().
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add function to get Modbus RTU interface index according
to interface name. This can be used to clearly identify
interfaces in the application.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add support to control DE/nRE RS-485 transceiver signals
over GPIO pins. Useful if the UART controller does not
support RS-485 mode.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add MODBUS RTU (over serial line) subsystem.
MODBUS RTU implementation supports booth server and
client roles. Some components of the implementation are based
on the uC/Modbus stack, which was published under Apache license,
(https://github.com/SiliconLabs/uC-Modbus
fdd1218a28e313c1212fed5ed42e5c65d3056a2c).
Resolves: #2854
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
The SD Card Physical Layer specification states in Table 7-1
(in section 7.3.1.1) that the LSB of the 48 bit command must
be set to 1 to act as an 'end bit'.
Fixes#33479
Signed-off-by: Rich Barlow <rich@bennellick.com>
Kconfig option USB_HID_PROTOCOL_CODE does not allow to set
boot interface protocol code for specific HID device but
only to set the same value for all device.
Add new API function to allow the application to set
Protocol Code per device. Deprecate USB_HID_PROTOCOL_CODE option.
Fixes: #32778
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
