net_icmp4_input() may net_pkt_unref() a packet. The header mustn't be
accessed after this or the system may crash.
Signed-off-by: Oliver Hitz <oliver@net-track.ch>
If there are more than one RX or TX threads, then make the name
of each of them unique so that it is easier to figure them out
in "kernel stacks" command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Windows 10 sends ECN-Echo and Congestion Window Reduced (CWR) flags
together with SYN flag in the connection establishment but the code
did not ignore these flags and send just SYN back (instead of SYN|ACK).
This caused the connection establishement in application level to
fail as the application was never notified about it.
Fixes#29258
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Clip the timeout to 64 seconds, this avoids the timeout value to
increase to high values (e.g. several years).
Signed-off-by: Armand Ciejak <armand@riedonetworks.com>
This avoids code duplication. The same logic was present
in dhcpv4_send_request() and dhcpv4_send_discover().
Signed-off-by: Armand Ciejak <armand@riedonetworks.com>
The TCP2 was calling accept callback before actually finalizing
the connection attempt.
Fixes#29164
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The L4 connected/disconnected events are usually used to detect
when the application is connected to the network. Unfortunately
if the device has also a static address, then the connected event
might be created (for the static address) even if DHCPv4 is not
ready yet and application would not be able to connect (yet) to the
network. In order to allow the application to fine tune the network
connection creation, generate start, bound and stop events for DHCPv4.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The "tc" field which was holding the traffic class thread
priority is not used nor needed so remove it from the struct
to save some space.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No real need to assert when the send timer is cancelled. Just
check if there is re-transmission going on and do nothing if
there is not.
Fixes#28758
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The local and accepted socket was not bound which caused the
local address to be set as NULL. This then caused issues when
zsock_getsockname() was called by the application.
Fixes#28735
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Since the info parameter is only read from and never written the const
in the function parameter should be present.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
When compiling with CONFIG_NET_NATIVE=n and CONFIG_NET_OFFLOAD=n
then the following error is printed.
```
In file included from zephyr/subsys/net/ip/ net_if.c:23:0:
zephyr/subsys/net/ip/net_private.h: In function 'net_context_state':
zephyr/subsys/net/ip/net_private.h:58:27:
error: type of 'context' defaults to 'int' [-Werror=implicit-int]
static inline const char *net_context_state(context)
```
This add `struct net_context *` as type for context.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Remove obsolete include of the shell_uart.h file.
It is sufficient to include the shell.h file.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
We run various TCP function from work queue. Make sure the
connection lock is taken before accessing the connection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of casting k_delayed_work directly to k_work, use the
k_work field name. This avoids warnings from Coverity and
allows the code to work even if the k_delayed_work fields are
re-ordered in the future.
Coverity-CID: 214346
Fixes#28659
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add dependency to UDP in DHCPv4 Kconfig option as UDP is needed
in DHPCv4 to work properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Bug description:
When in tcp_conn_unref(), in case one of the delayed works is already
submitted to sysworkq (after delay period), e.g. send_timer, the check
of k_delayed_work_remaining_get() prevents calling
k_delayed_work_cancel().
This leads to corrupting sysworkq when zeroing struct tcp* conn.
Note that the "next" pointer for the work queue is part of the struct
work (in _reserved field). Which is, in this case, a member of struct
tcp.
Scenario leading to the bug:
(1) net_tcp_connect() is called from a work in sysworkq
(2) net_tcp_connect() submits conn->send_timer to sysworkq
(3) while net_tcp_connect() is waiting on connect_sem, delay period
passes (z_timeout) and send_timer enters sysworkq work slist
(4) also, some other code (app) submits more works to queue, now pointed
by conn->send_timer in sysworkq work list
(5) connection fails (no answer to SYN), causing a call to
tcp_conn_unref()
(6) tcp_conn_unref() is calling tcp_send_queue_flush()
(7) checking k_delayed_work_remaining_get(&conn->send_timer) returns 0
due to delay period end, but send_timer is still in sysworkq work
slist (sysworkq thread still hasn't handled the work)
(8) BUG!: no call to k_delayed_work_cancel(&conn->send_timer)
(9) back in tcp_conn_unref(), a call to memset(conn, 0, sizeof(*conn))
zeroes conn->send_timer
(10) conn->send_timer is pointed to in sysworkq work slist, but is
zeroed, clearing pointer to following works submitted in stage (4)
(11) EFFECT! the works in stage (4) are never executed!!
NOTES:
* k_delayed_work_cancel(), handles both states:
(1) delayed work pends on timeout and
(2) work already in queue.
So there is no need to check k_delayed_work_remaining_get()
* This is also relevant for conn->send_data_timer
Solution:
removing checks of k_delayed_work_remaining_get(), always calling
k_delayed_work_cancel() for work in struct tcp, in unref, before memset
Signed-off-by: David Komel <a8961713@gmail.com>
Since conn->send_data_total is of time size_t we need to use %zu or
we'll get build errors in sanitycheck on 64-bit platforms
Fixes#28605
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If the network driver for some reason did not set the data in
the network packet properly, then just drop it as we cannot do
anything with just plain net_pkt.
Fixes#28131
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is no handler for IPv4 broadcast packet, then ignore it
instead of trying to send an ARP message to resolve the senders
address.
Fixes#21016
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to have timer that closes the connection for good if
we do not get the FIN and ACK reponse from the peer.
If there is any pending data when application does close(),
send them before sending FIN.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is some error during connection creation, just bail
out in order to avoid null pointer access.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we try to send data but the sending window is full, then
try to kick the resend of the pending data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is no space in the sending window, then return -EAGAIN
so that the caller may try later.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We should have a max value for sending window so that application
is not able to use all our net_bufs for queueing packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The socket layer expects to receive -ENOBUFS if we do not have
any network buffers so cannot build a network message to be sent.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is an error, the net_context.c:context_sendto() will
free the net_pkt, so we must not do it here.
This commit fixes this error message:
<err> net_pkt: *** ERROR *** pkt 0x20421908 is freed already
(context_sendto():1672)
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Usually the out-of-memory situation will clear itself eventually,
so if that happens in TCP, then keep the connection running and
let the user to decide what to do next.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of hardcoded value of 3, use the value from Kconfig file
so that user can tweak the TCP retry count.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use SYS_SLIST_FOR_EACH_CONTAINER_SAFE() macro when searching
the connection list so that we notice if new entries are added
or removed in the list.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of forcing the slist node to be first in the tcp struct,
use the pointer to node when accessing the slist. This way we
can change the ordering of fields in tcp struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Because the previous commit fixed the destination address check,
we need to handle msghdr (used by sendmsg()) in CAN socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to specifically check CAN sockets here. This also means
that SocketCAN will need to support sendmsg() call too. This will
come in following commit.
Fixes#28229
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When the connection is terminated, make sure that any pending
data is feed to the application.
Fixes#28057
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive a TCP segment with FIN | ACK | PSH flags, then
update the ack values properly.
Fixes#27982
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When connection is closed and we send ACK flag, use proper seq
values so that any data that is still in flight will get acked too.
Currently this assumes that window is still open.
Fixes#27876
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Allow user to create SOCK_DGRAM type AF_PACKET socket. This
allows user to send raw IP packets without specifying
L2 (like Ethernet) headers.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
-Wimplicit-fallthrough=2 requires a fallthrough comment or a compiler
to tells gcc that this happens intentionally.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Added additonal checks in net_ipv6_input to ensure that multicasts
are only passed to the upper layer if the originating interface
actually joined the destination multicast group.
Signed-off-by: Philip Serbin <philip.serbin@lemonbeat.com>
Now that TCP2 is the default stack, make the shell compatible
with both stacks.
Note: net_tcp_foreach is not implemented in TCP2, so related
code depends on TCP1.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Print role information next to port information. Also make
sure that port number is set correctly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net: route: Add prefix-based ipv6 multicast forwarding
This adds/reenables the feature of multicast routing/forwarding.
The forwarding decision is based on the added multicast routes
and the new network interface flag:
NET_IF_FORWARD_MULTICASTS.
Signed-off-by: Jan Georgi <jan.georgi@lemonbeat.com>
This patch implements optional authentication phase, which is done
between link establishment and network phases. It is part of LCP option
negotiation to decide whether authentication is needed and which
protocol will be used. For now we add only PAP support and try to
negotiate it when some other protocol (e.g. CHAP or EAP) is proposed
earlier. For simplicity reason we only add one way authentication
support, which means that we try to authenticate to the other peer, but
do not require authentication from it.
This is an important step to make PPP work with cellular network modems,
because most of them require to provide username and password within PPP
authentication phase. Those credentials are used by modem to login to
cellular network. In most cases however it is enough to provide dummy
values, because they are not verified. For this reason and simplicity of
this patch we hardcode PAP Peer-ID and Password now.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Instead of casting struct in6_addr, sin6_addr member is now used
directly, like in every other instance of calling net_ipv6_is_prefix().
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
For platforms using non-native stacks, net_tcp_init() should be
compiled out, similar to how it is done in tcp_internal.h.
Fixes#27463
Signed-off-by: Vincent Wan <vwan@ti.com>
Enable the new TCP stack as a default one in order to get people
to use it before Zephyr 2.4 is released.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to enable CONFIG_NET_PKT_TXTIME and
CONFIG_NET_PKT_TXTIME_STATS at the same time. This will increase
memory consumption but as the CONFIG_NET_PKT_TXTIME_STATS is
only meant to be enabled for debugging purposes this overhead
can be accepted.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In TCP, we increase the net_pkt refcount in order to resend
it later if we do not receive ACK in time. Because we are not
getting a new net_pkt, the TXTIME statistics would be calculated
incorrectly. So if we re-send, reset the net_pkt creation time.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add extra net_pkt RX timing information to "net stats" command.
You neeed to enable CONFIG_NET_PKT_RXTIME_STATS and
CONFIG_NET_PKT_RXTIME_STATS_DETAIL config options.
The "net stats" command will print something like this:
Avg RX net_pkt (7) time 459 us [0->23->16->257->160=456 us]
The extra stats is the end of line inside brackets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add extra net_pkt TX timing information to "net stats" command.
You neeed to enable CONFIG_NET_PKT_TXTIME_STATS and
CONFIG_NET_PKT_TXTIME_STATS_DETAIL config options.
The "net stats" command will print something like this:
Avg TX net_pkt (5867) time 82 us [0->33->20->27=80 us]
The extra stats information is the end of line inside brackets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Collect information how long net_pkt has travelled in IP stack
in certain points. See network documentation what these points
are and how to get information about the timings. This initial
commit adds support to TX timing collection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Include directories for ${ARCH} is not specified correctly.
Several places in Zephyr, the include directories are specified as:
${ZEPHYR_BASE}/arch/${ARCH}/include
the correct line is:
${ARCH_DIR}/${ARCH}/include
to correctly support out of tree archs.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The original return type of tcp_data_get() was unsigned and the
return value <0 was not checked properly.
Fixes#25723
Coverity-CID: 210559
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove the static buffer for TCP options. Make sure that the
options were read properly to temp buffer.
Fixes: #25729
Coverity-CID: 210056
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that only those threads that have been granted access
to net_if objects, can call the functions that modify net_if data.
The CONFIG_NET_IF_USERSPACE_ACCESS config option is also removed
as it is no longer needed after this change.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make net_if a kernel object with type K_OBJ_NET_IF so that we
can restrict access to it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Bugfix: in tcp_conn_unref(), the conn was zeroed before removing it
from the connection list (tcp_conns).
Zeroing conn, results in zeroing its 'next' member,
which in effect removes all its following connections referred to
in tcp_conns linked list.
The solution is to move the memset() after sys_slist_find_and_remove().
Signed-off-by: David D <a8961713@gmail.com>
The network interface check was invalid when IPv6 Router
Solicitation message was timeout and interface was not found.
This is highly unlikely but needs to be checked properly.
Fixes#27145
Coverity-CID: 211511
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The TCP2 stack does operations directly on the packet data which may
or may not be aligned. The unaligned access causes a fault on the
Cortex-M0+ so use the UNALIGNED_* macros instead.
Signed-off-by: Michael Hope <mlhx@google.com>
Use system provided Z_STRUCT_SECTION_FOREACH() and
Z_STRUCT_SECTION_ITERABLE() macros instead of manually coding
everything for network sections.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to implement a blocking connect, add a semaphore
and block on it in net_tcp_connect().
The semaphore is released when ESTABLISHED state is reached.
In case tcp_conn_unref() is called while waiting on the semaphore,
defer the unreference, tcp_conn_unref() will be called from
net_tcp_connect().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to improve readability, refactor and simplify
the control flow in net_tcp_connect().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order for events to be correctly interpreted in SYN_SENT,
check for SYN and ACK simultaneosly.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
net_tcp_put() can be called before ESTABLISHED state
is reached, send FIN only in ESTABLISHED state.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Current implementation of net_ipv6_send_rs() uses
net_ipv6_addr_create_ll_allnodes_mcast() for creating RS packet.
As result we send RS packet to all-nodes destination [FF02::1],
but RFC4291 requires all-routers destination [FF02::2] for RS packets.
Signed-off-by: Eug Krashtan <eug.krashtan@gmail.com>
Unit tests were failing to build because random header was included by
kernel_includes.h. The problem is that rand32.h includes a generated
file that is either not generated or not included when building unit
tests. Also, it is better to limit the scope of this file to where it is
used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
In function z_vrfy_net_addr_pton(),
the final copy should be to 'dst' variable not to 'src'
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Currently user needs to specify quite much additional options to enable
OpenThread support. He also needs to set ip address count,
heap size, etc depending on features enabled.
Nade changes to automatically select/set some of the options on
enabling OpenThread
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
If we have multiple network interfaces and we are waiting incoming
network packets, make sure to honor the bind of the socket so that
correct socket will receive data in certain network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
ppp does not populate the lladdr fields in the received packet.
To enable routing for packets received on the ppp interface, the check
of the link layer addresses in the packet must be skipped.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
A net context in LISTENING mode waits for incoming connections, once
a new connection is established a new net context is spawned which
is responsible for handling the new connection.
Therefore when closing a LISTENING context it is not useful to send FIN
as it is never connected. Actually closing the connection would be done
by calling close on the spawned net context which is returned by the
accept call.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
Currently there is chosen the link local address as a source address
for each multicast destination address. It is a bug for OpenThread
network where the mesh-local EID addres should be picked in this case.
This commit fixes it by distinquish the mesh local multicast among any
others.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Add command to register a receive callback to the net_context used for
the TCP connection that is opened with 'net tcp connect'. The receive
callback will simply print the number of bytes received and inform if
the connection is closed. This makes it possible to test both the tx
and rx paths with the net shell.
Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>
This change fixes routing for routes when the nexthop is a link-local
address of a connected peer.
The issue was that nexthop was correctly set from the routes, but the
code did not detect that the nexthop address (link local of the pc on
ppp interface) was on the ppp interface, because
net_if_ipv6_addr_onlink() only evaluated the network prefix and not
any other information (like the nbr list).
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
This change adds new, optional switch to 'net ping' command - to
be more specific the '-I <iface index>', where the <iface index>
is the number of supported network interface.
One can discover this number from the Zephyr shell after running
'net iface'.
The default interface stays the same - just the switch is added to
override the used interface for 'net ping' invocation.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
The network statistics is stored for each traffic class, but the
collecting function was given net_pkt priority. The priority
must be first converted to traffic class and then the statistics
stored to correct place in the stats array.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Need to use %zd in formatter string for net_pkt_get_len since it returns
a size_t otherwise we get something like:
error: format ‘%d’ expects argument of type ‘int’, but argument
3 has type ‘size_t’ {aka ‘long unsigned int’} [-Werror=format=]
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The Router Advertisement can have prefix option. It's length
is 4 but the code did not check that which meant that we could
accept malformed packet. See RFC 4861 chapter 4.6.2 for details.
Fixes#25694
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that we do not add same IPv6 prefix, received from RA,
multiple times to prefix timer list. This avoids possible
denial-of-service issue if we receive suitably crafted RA packet.
Fixes#25698
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to support the retransmission for the outgoing data:
1. The outgoing data packet is appended to the send_data queue
in net_tcp_queue_data().
2. tcp_send_queued_data() is called and will use tcp_send_data()
to sends queued but unsent data packet by packet
until there's an unsent data and the receiver's window isn't full.
tcp_send_queued_data() subscribes send_data_timer
that will handle retrasmissions with tcp_resend_data().
3. tcp_send_data() peeks a single chunk of data from the send_data
queue that will not exceed the maximum segment size
until the the receiver's window is full.
tcp_send_data() uses conn->seq and conn->unack_len as the sequence
number for the TCP packet.
conn->unacked_len is advanced on each send.
4. On data acknowledgment:
- acknowledged amount of data is removed from the beginning
of the send_data queue
- conn->seq is advanced by the acknowledged amount
- conn->unacked_len is decremented by the acknowledged amount
- send_data_timer is cancelled
- tcp_send_queued_data() is called to send queued but
prevoiusly unsent data
5. On timeout, tcp_resend_data() will reset conn->unack_len,
peek one packet from the beginning of the send_queue and resend,
terminating the connection on retries exceeded.
Meanwhile the outgoing data tcp_send_queued_data() is just
appended to the send_data but not sent.
In case of the acknowledgement, tcp_send_queued_data() will
start sending multiple packets until the receiver's window
is full.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to support the retransmission for the outgoind data,
add the following into the TCP connection:
- struct net_pkt *send_data (used as a queue)
- send_data_total
- unack_len
- send_data_timer
- send_data_retries
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to support the send window, add send_win into
the TCP connection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to support the data retransmission, refactor tcp_out()
into tcp_out_ext() which supports passing the sequence number.
In addition drop modifications of the connection sequence number
from tcp_out_ext(), this is the responsibility of data retransmission.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to use struct net_pkt for the outgoing data queue,
update tcp_pkt_alloc() macros, so they support allocation
without buffer.
Additionally, merge tcp_pkt_alloc() macros macros into one.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Unsuccessfull packet clone in tcp_data_get() isn't handled,
add an error handling and don't ACK the incoming data in this case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to handle sequence overflow cases, use
net_tcp_seq_greater() to check if the sequence is greater/lower.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
The initial sequence number for a connection should be randomized
to prevent easy guesses.
Do not randomize the sequence number if network test or
test protocol is enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
The link address was not printed correctly as log_strdup() was
missing from the debug print.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print detailed information about a given net_pkt. This is
useful if there is a memory leak and you want to see more
detailed information about the data inside the buffer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Added support for Qemu User Networking and tested with
qemu_x86 model. The support is kept simple assuming that
the TAP interface will always be preferred for more
sophisticated / practical use cases.
QEMU User Networking is implemented using "slirp", which
provides a full TCP/IP stack within QEMU and uses that
stack to implement a virtual NAT'd network. As this
support is built into QEMU, it can be used with any model
and requires no admin privileges on the host machine,
unlike TAP.
Added documentation to facilitate the user.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
If we have removed first net_buf, then we must not restore the
original cursor as that will point to wrong head net_buf.
Add also unit test to check that the packets are removed
properly.
Clarify the documentation that we are removing data from
beginning of the function, also document that the cursor
is reset after this call.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to avoid retransmissions from the peer's side
on full-close, handle states properly.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If net_pkt_pull() would cause an empty net_buf, then unref
those empty buffers from the list.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit renames the Kconfig `FLOAT` symbol to `FPU`, since this
symbol only indicates that the hardware Floating Point Unit (FPU) is
used and does not imply and/or indicate the general availability of
toolchain-level floating point support (i.e. this symbol is not
selected when building for an FPU-less platform that supports floating
point operations through the toolchain-provided software floating point
library).
Moreover, given that the symbol that indicates the availability of FPU
is named `CPU_HAS_FPU`, it only makes sense to use "FPU" in the name of
the symbol that enables the FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
In order to fix the line tracking of the TCP packet allocation
with the test protocol enabled, refactor tcp_pkt_alloc(),
so the line of the allocation can be tracked properly.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Some services like DHCHPv4 directly send raw packets to the iface.
This causes issue when the iface does not implement l2, e.g.
because it is a socket offload interface. fix that.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Make sure we only parse the received TCP options only once. Store
the options to tcp conn struct for later use.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch fixes an issue with TCP options reading. Previous approach
was accessing the options with pointers (th + 1). This does not work if
TCP options span multiple net_pkt buffer fragments. Instead net_pkt
functions must be used.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
In order to avoid retransmissions from the peer's side
on active connection close, acknowledge the incoming FIN+ACK
in FIN_WAIT_1 state.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
We cannot directly use the local address in net_context when
registering the connection as it is not proper type. So create
temp address variable for that purposes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Avoid dynamic allocations and all the issues if we run out of
memory, by placing the connection endpoint directly to TCP
connection struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In tcp_endpoint_cmd() we allocate and then almost immediately
destroy the allocated endpoint. This is quite inefficient so
use a endpoint from stack in the compare.
Separate endpoint allocation from value setting so the caller
can decide how the endpoint union values are set.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some other part of Zephyr has similar defines (SRC)
causing build failures.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Assigning the allocated IPv4 endpoint as struct sockaddr
leads to the memory overwrite, assign the correct structure,
i.e. struct sockaddr_in.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to implement active connection close with the
TIME_WAIT state, send FIN and enter FIN_WAIT_1 state.
We actually send FIN+ACK as most of the implementations do.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to support TIME_WAIT state during the TCP connection
termination, add a TIME_WAIT timer and the corresponding state.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to improve readability, rename TCP_FIN_WAIT
states into TCP_FIN_WAIT_1, TCP_FIN_WAIT_2.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
