With these changes, dial up Zephyr application/driver can use
socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW) for creating
a socket for sending/receiving data to/from ppp net link, i.e.
packet is going to/from PPP L2.
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
IPv6 source address selection procedure selected link-local address
for any muticast destination with other scope than mesh-local. It
was a cause of problems for broader multicast scopes like admin-, or
site-local. For such broader scopes source address must be at least
as broad as the scope of multicast destination.
This patch updates IPv6 source address selection procedure. Now
link-local address is selected only for link-local destinations,
including multicast destinations. For broader destination scope,
source address with broader scope is selected.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Previously, a non null-terminated "string" could
be passed to z_impl_net_addr_pton if the string was
exactly `INET6_ADDRSTRLEN` long.
Signed-off-by: James Harris <james.harris@intel.com>
When printing network interface information print index or
index + pointer, so that the output is more user friendly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As DAD is not done for point-to-point links, we can mark them
valid immediately. If this is not done, then the address will
never be picked as a source address to a sent packet.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Useful to know what flags are set for the network interface
so print them in the shell by the "net iface" command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This can be used to implement tunneling, VPN etc. The virtual
interfaces can be chained together to support multilayer
network interfaces.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a function that allow caller to create IPv4 header with
possibility to set various fields in the header.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Application can disable IPv4 or IPv6 later if those are not
needed nor used for a given network interface.
Fixes#14581
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove legacy TCP stack as it is replaced by the new TCP2 stack.
The TCP2 stack has been the default stack since 2.4 release.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add locking when accessing interface list and the DHCPv4 config
struct that is found in net_if.
Fixes#33348
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Switch to the new API for delayed work related to DNS queries.
In the previous solution it was assumed that the work item could be
immediately cancelled at the point the query slot was released. This
is not true. We need a secondary condition to record the fact that
the query was completed while the work item was still pending, and an
additional check to detect when the work item completed and the slot
reclaimed.
Also annotate functions to indicate when they require the lock on
query content to be held, add some helpers that abstract core
operations like invoking a callback or releasing a query slot, and fix
some more cases where query slot content was accessed outside of the
new lock infrastructure.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
If there is no timeout, the connect will timeout immediately
and the connection is not established.
Fixes#33185
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
DHCPv4 client code needs to know information when network
interfaces are going down and up. So make sure that network
management config options are enabled in that case.
Fixes#33137
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Mention that it's "data offset" in 32-bit words. Helpful when doing
code review and using search for "th_off".
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If CONFIG_NET_TCP_ISN_RFC6528 is disabled, then mbedtls include
files are not available so check this.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Calculate Initial Sequence Number (ISN) as described in RFC 6528
https://tools.ietf.org/html/rfc6528
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The address pointer cannot be null at this point so remove
the checks.
Coverity-CID: 219595
Fixes#33071
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently there is no way to distinguish between a caller
explicitly asking for a semaphore with a limit that
happens to be `UINT_MAX` and a semaphore that just
has a limit "as large as possible".
Add `K_SEM_MAX_LIMIT`, currently defined to `UINT_MAX`, and akin
to `K_FOREVER` versus just passing some very large wait time.
In addition, the `k_sem_*` APIs were type-confused, where
the internal data structure was `uint32_t`, but the APIs took
and returned `unsigned int`. This changes the underlying data
structure to also use `unsigned int`, as changing the APIs
would be a (potentially) breaking change.
These changes are backwards-compatible, but it is strongly suggested
to take a quick scan for `k_sem_init` and `K_SEM_DEFINE` calls with
`UINT_MAX` (or `UINT32_MAX`) and replace them with `K_SEM_MAX_LIMIT`
where appropriate.
Signed-off-by: James Harris <james.harris@intel.com>
Uses of k_work_pending are to be replaced by k_work_is_pending which
conforms to current proposed naming guidelines.
Both uses in this file are fragile: that a work item is pending does
not mean changes since it was first submitted are guaranteed to be
seen when the work item begins (began) executing.
As long as this module is expected to be replaced by tcp2 it doesn't
seem worth trying to fix the logic, so just switch to the new function
name.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Checking whether a work item is pending before submitting it is racy:
the item may be finishing up in its handler, and essentially
completed, in which case chosing not to resubmit would leave work
unhandled.
In this case it appears very wrong, since the sole call site in
net_if.c has just initialized the work item, which is not permitted if
the work item is pending.
Remove the check.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
If we are sending a network packet and if the remote address
is not set in the context (which means that connect() has not
been called), then we must set the target network interface
to a proper value.
This is done so that when we select the local source address,
we might select the wrong interface if we have multiple network
interfaces in the system. In this case the packet would be always
assigned to first network interface regardless of the destination
address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that the old API has been reimplemented with the new API remove
the old implementation and its tests.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The tcp2 infrastructure is using the legacy delayed work API, and
relies heavily on the transient state indicated by an estimate of
delayed time remaining to determine whether a delayed work item is
still active. While the wrappers for this work in most cases, one use
is unsanctioned: directly accessing the fields of k_delayed_work
structure to satisfy the calling parameters of the handler when
invoked directly.
The chosen solution for this specific need in the new API is to use a
schedule (rather than reschedule) operation, which leaves any previous
timer unchanged but allows immediate submission if the work is idle.
This changes behavior in that the resend is delegated to the work
queue, rather than done immediately. The former behavior can be
supported by further refactoring that turns the work handler into a
wrapper around a function that takes a connection reference, and
invoking that here, while the handler invokes it after reconstructing
the connection from the contained work item.
For now put in a hack that also uses the non-public fields of the
delayed work structure to implement the required behavior. The
complete fix if this solution is used requires replacing all use of
k_delayed_work in this module with k_work_delayable, leveraging the
new functionality of the API to avoid having to guess about the true
state of a work item based on its transient timer or flag states.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This commit adds to network shell set of basic commands for UDP
protocol to receive and send datagrams.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Check NULL value when we are trying to print link address
because the link address can be null.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the input string can be allocated from stack, we need to use
log_strdup() in net_pkt_hexdump() to print the extra string.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This returns the available contingous space in the packet starting from
the current cursor position.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
If the network interface is down when trying to send a message,
return -ENETDOWN as we cannot send a message in this case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit fixes some edge cases when using net_bufs with reserved
bytes (headroom) as fragments of a net_pkt.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
net_buf_max_len() provides the maximum number of bytes which can be put
behind the data pointer. This provides a save alternative to using the
size field of the net_buf structure directly, which does not take the
reserved bytes (headroom) into account.
This commit also replaces the usage of the size field in places where
size got used directly. Code has not been adjusted when it is easy to
recognise that the buffer does not have any reserved bytes, which is the
case after allocation or reset. Same goes for the faulty usage by
net_pkt as exposed by the last commit and begin fixed by a separate
commit.
Even though it would be cleaner, I decided to not rename the size field
to e.g. __buf_size in order to keep the amount of code changes low.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
If user sets CONFIG_NUM_PREEMPT_PRIORITIES=0, then the priority
of the net_mgmt thread will be -1 which is the same as idle thread.
This will trigger assert in kernel as then the minimum coop priority
is -2 in this case. Remove the net_mgmt thread priority setting from
Kconfig file as it is low value and set the coop thread priority
the same way as other network threads are doing it.
Fixes#32375
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Current 6lo implementation is unable to deal with scattered headers
(which should not happen usually, though it's a valid use case), so
let's just fail uncompressing such packet then.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When pushing received data to the application, check that app
was able to receive the data. If the application already closed
the socket, then we must free the received net_pkt in order to
avoid memory leak.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we cannot allocate net_pkt or net_buf, then check this condition
properly and release other resources that were already allocated.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to make sure that when listening a connection establishment,
the connection gets cleared if we do not receive final ACK.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
