Use the definitions of UUID values instead of magic constants with
explanation in comment.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Check for associated Extended Advertising set to determine
whether Broadcast ISO Group instance has been already
created.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add association between extended advertising, periodic
advertising and broadcast ISO instance, so that attempts to
create and terminate BIG can detect error conditions.
Error conditions being, trying to create BIG without a valid
periodic advertising train, or terminating BIG without prior
creation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When ticker job is disabled inside radio events then all
advertising, scanning, and slave latency cancel ticker
operations will be deferred, requiring increased ticker
thread context operation queue count.
Relates to #32430.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Consistently use the internal BT_CTLR_ADV_SET value in the
controller's implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add missing offset_adjust filed to pdu_adv_sync_info.
Add handling of the field when sync_info is added to advertising PDU.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix the tertiary PDU and extended header length value after
the refactoring in the commit c8475b9a3e ("Bluetooth:
controller: ULL: enable TX of CTE with per. adv. PDU").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rearrange the LL interface functions in the ll.h file to
group functions use by HCI separate from other buffer and
control flow related functions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the controller version define into ll_feat.h file to
keep the version number and featureset bitmaps together.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move LLL header files for all roles to common folder. Move
vendor-specific content to internal header files, in particular ADV
buffer handling. Define the vendor-specific type lll_adv_pdu in a
separate header file lll_adv_pdu.h to avoid cyclic dependency when
moving ADV buffer handling to internal header file. Make sure all
internal header files are in vendor-specific folders.
The goal is to have a more consistent structure for LLL header files
and allow unconditional inclusion of non-internal LLL header files.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Remove the depency on host emulation of ECC for the Use debug keys
option.
This allows the application to use debug keys without shifting the
ECC from the controller to the host, which could potentially alter
the behavior of the application and make debugging this way less useful.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor the ECC emulation setting the supported command bits in order
to group the supported commands together with the implementation of
these commands.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
In order to avoid stalling LLCP procedures blocking done event
processing, done events are now put in a separate memory queue,
and processed by own mayfly function.
This ensures prepare/done refcount balancing and prevents assertion
due to lack of done events.
Signed-off-by: Morten Priess <mtpr@oticon.com>
We need to make sure aux is cleared on reset, otherwise we may end up
with legacy advertising with aux.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Set #0 is used for legacy advertising when legacy HCI commands are used
and in such case it's possible to enable advertising without any prior
configuration. This means we should better always have PDUs in set #0
initialized with default empty data.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
We should remove all advertising sets when resetting controller. It's
enough to just clear is_created flag for each set.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Removes the 3 byte padding at the end of each proxy connection's rx
buffer.
Fixes#18509.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Add compilation guards for the feature_rsp_send function to avoid
compilation errors for some configurations.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
It was decided that the Bluetooth audio subsystem should
be in subsys/bluetooth/audio instead of subsys/bluetooth/host/audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add support for ISO feature bits. This includes extending fields that
hold features to 64 bits to be able to handle the host-controlled
"Isochronous Channels" feature.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Added Tx fragmentation implementation assertion to check
invalid offset use due to any memory corruptions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use the vendor specific ticker resolution margin in the
central connection initiation offset calculation.
Related to commit 89ab68f242 ("bluetooth: controller:
Vendor specific ticker resolution margin").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove the redundant advanced scheduling event margin used
while finding a free space between existing active central
connections.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the initial connection event length calculation to
when initiating connection so that initiator with advanced
scheduling to place central connections in a non-overlapping
timeline has the correct ticks slot value available.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add checks to detect ACL data lengths greater than the
configured maximum Tx buffer size in the controller.
The Host should conform to the LE_ACL_Data_Packet_Length
returned by the LE Read Buffer Size command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Optimize LOW_LAT_ULL scheduling by avoiding redundant
rx_demux mayfly enqueue. Only schedule after checking for
node rx or tx ack presence in the memq.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use the Subsystem defined BT_PER_ADV_SYNC_MAX Kconfig in the
controller implementation of Periodic Advertising Sync Sets.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
A line of code was guarded by CONFIG_BT_L2CAP_TX_FRAG_COUNT instead
of CONFIG_BT_ISO_TX_FRAG_COUNT.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
ISO is a building block for BT_AUDIO but it is not only
useful for AUDIO, and as such should be possible to
enable without enabling BT_AUDIO.
This commit moves iso.c and iso_internal.h to the
host directory (from host/audio) and removes
the CMakeLists.txt.
The /audio directory is left intact for the Kconfig options
it provides, and as a directory for future BLE Audio
content.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit moves the BT_ISO to a common (host and controller)
Kconfig and fixes the ISO buffers in hci_raw.c
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add release of memory acquired for periodic advetising sync. set
when:
- advertising set is removed
- advertising parameters are changed and past PDU type was
extended advertising PDU
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Remove LL_ASSERT from functions that return latest advertising PDU.
The LL_ASSERT was raised in situation that there is no memory to
store unused PDUs memory in a pdu_free queue or extra_data_free queue
Those functions return NULL in such sitation. The returned value is
verified by callers by LL_ASSERT. That gives better context if lack
of memory issue issue occurs.
Besides that there was removed a LL_ASSERT from lll_adv_pdu_and_extra_-
data_alloc. The reasons is the same as above, to give better context
when the lack of memory issue occurs.
This function is used in ULL context (ll_adv_sync_ad_data_set).
If it returns NULL the caller will return BT_HCI_ERR_MEM_CAPACITY_-
EXCEEDED to Host.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add set of functions that will make possible to configure
radio Direction Finding Extension to transmit CTE for periodic
advertising.
Some of the new Radio API functions are provided as separate
functions changing the same Radio peripheral registers, e.g.
radio_df_mode_set_aoa, radio_df_mode_set_aod. This is done on
purpose and is related with lack of DFE in nrf52_bsim.
To avoid use of conditionally compiled constants to represent
e.g. CTE mode; separate functions were introduced.
Thanks to that DF unit tests are able to compile successfully
without changes in nrf52_bsim platform. Also if DFE is added
to nrf52_bsim there is no need to change the code until it is
desired.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The storage for extra data is required for implementation of
CTE transmission with periodic advertising.
Data required to transmit CTE correctly are compound of two parts:
- PDU field CTEInfo
- radio configuration to transmit actual constant tone at the end
of PDU.
Extra data is a storage required for radio configuration data.
Nevertheless it must be in compliance with content of CTEInfo field.
Because of that extra data is stored as part of lll_adv_pdu and
is double buffered like PDU memory.
Bluetooth 5.1 spec. allows to enable or disable CTE TX
and change CTE TX parameters when periodic advertising is
enabled. Besides that CTE TX settings may be set before periodic
advertising parameters are set. In such situation ll_adv_sync_set
may be not yet created.
To overcome these constraints ULL should store CTE TX
settings and forward them to LLL only when CTE TX is enabled.
Because of above reasons ULL stores CTE TX settings in ll_adv_set.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add Directin Finding related features:
- transmission of connectionless CTE,
- antenna switching during CTE transmission (AoD),
to list of features supported by controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Remove support for nRF5340 PDK in the BLE controller.
The controller will now support only the nRF5340 DK.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix cancel of Periodic Synchronization on Coded PHY. Reset
the association of periodic sync instance after validation
of command disallowed.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When address resolution is disabled, an identity address has
been added into the resolving list with peer IRK, and device
privacy has not been selected for the peer device then
connection indication shall not be sent to the peer that is
advertising using its identity address.
Fixes#24731.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fail after pairing request and response have been exchanged if the
selected pairing method would not result in the required security level.
This avoids the case where we would discover this after having encrypted
the connection and disconnect instead.
This was partially attempted but lacked checking for authentication
requirement when L3 was required, as well as skipping the check if L4
was required but remote did not support Secure Connections since the
check was after we had taken the legacy branch.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Set the error in the security changed callback when the encryption has
not reached the required security level.
Terminate the pairing procedure in SMP on failure to avoid the security
changed callback being called twice in this case.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Terminate the pairing procedure when disconnected while this was in
progress. This notifies the application that security has failed and
removes the key entry.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Set the SMP flag encryption pending in the case where a bond exists
with ediv and rand equal to zero, i.e LE Secure Connections bond.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
When receiving unexpected SMP PDUs with no pairing procedures in
progress don't treat it as a pairing procedure that has failed.
This causes unexpected SMP PDUs to trigger the pairing failed and
security changed callback at unexpected times.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add status only pairing failed callbacks (complete and failed) so that
these handlers can be added without providing the ability for MITM
pairing procedures.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Rename auth_err_get to security_err_get which better reflect the
error namespace it converts to. Also update to using the enum definition
instead of uint8_t for local variable holding returned value.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
when BT_PASSKEY_INVALID was set, it never updated the fixed
passkey which made its use ineffective
Signed-off-by: Faisal Saleem <faisal.saleem@setec.com.au>
The ATT request buffers are held until the ATT response has been
received. This means that the ATT request buffers are released by the
RX thread, instead of the from the RX priority context of
num_complete.
This can cause a deadlock in the RX thread when we allocate buffers
and all the available buffers are ATT requests, since the RX thread is
the only thread that can release buffers.
Release the ATT request buffers once they have been sent and instead
handle ATT request resending by reconstructing the buffer from the
GATT parameters.
Also re-order the order of resource allocation by allocating the
request context before the buffer. This ensures that we cannot
allocate more buffers for ATT requests than there are ATT requests.
Fixed a buf reference leak that could occur when the ATT request buffer
has been allocated, but GATT returns an error before handing the
responsebility of the buffer to ATT, for example when bt_att_req_alloc
fails.
This is fixed by moving the functionality of att_req_destroy to
bt_att_req_free.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove the ATT request destroy callback which is never assigned
by any of the ATT requests.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix indicate without func not working properly, when sent as a
non-req by GATT this has two propblems:
- The indicate would not be treated as a transaction, and back
to back indicate would be sent without waiting for the confirm
- The destroy callback would not be called on the indicate parameters
since the indicate_rsp callback would not be called.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
ATT channels do support queueing buffer so it no longer need to block
waiting the tx_sem besides the buffer allocation already serves the
same purpose as the application will not be able to have more requests
than there are buffers available.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Allow to request a higher security level during the key distribution
phase.
This is required by ATT and L2CAP since they only react to the encrypt
change event where they resend the current request.
The current request might require a higher security level still and
might have to request a higher security level before the pairing
procedure has been finished.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
When ATT resends an ATT request it is sent as a "response" instead of
as a request. This causes the ATT request buffer to be released and
the ATT request cannot be resent one more time.
This causes a problem when the ATT request requires authentication
but the elevation of security is not enforcing MITM protection.
In this case the ATT will first require security level 2 and then resend
the request once this has been reached.
This will lead to a new ATT error response and ATT will require security
level L3.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix the update keys check allowing to overwrite the keys when using
debug keys. Instead the check disallowed overwriting keys made using
debug keys.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix gatt write command returned "write in progress" when either
hex2bin or bt_gatt_write returned an error.
The write_params.func should not be set if the write command was not
successful.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Sets the sequence number when re-encrypting messages from the friend to
the lpn.
This is a regression from #28511.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Set app_idx and net_idx in the msg_ctx before calling
bt_mesh_keys_resolve when re-encrypting friend messages, as they'll be
referenced inside the function.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Fix missing advertising PDU length initialization which
prevented advertising PDU to be transmitted by Radio. This
issue was reproduced when connectable undirected advertising
was enabled without setting an advertising data.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
After #31176, the network would get stored immediately in
bt_mesh_net_create, causing the address and devicekey to get stored as
their zero-initialized version, as they're only being set in the
bt_mesh_comp_provision call, which fires after.
Fixes#32067.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Reduces some user confusion regarding whether it is related
to "Connection ID", "Channel ID", or "Company ID" for the
uninitiated.
Signed-off-by: Emil Hammarstrom <emil.hammarstrom@assaabloy.com>
Fix OpenISA port to include compiler memory barrier as in
commit 1a14f8b3a6 ("Bluetooth: controller: Use DMB instead
of DSB").
Relates to commit 1af2b91c23 ("Bluetooth: controller: Fix
Tx Buffer Overflow") and to commit ef2ece82c0 ("Bluetooth:
controller: openisa: Fix sanitycheck failures") and to
commit c2fc629dd2 ("Bluetooth: controller: 255 byte AD
payload support").
Fixes#31937.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix for OpenISA rv32m1_vega_ri5cy board not supporting
different IRQ Priority levels for LLL, ULL_HIGH and ULL_LOW
execution contexts.
Fixes#31937.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix BT_CTLR_ULL_HIGH_PRIO default value to equal
BT_CTLR_LLL_PRIO value if BT_CTLR_LOW_LAT is enabled, else
default ULL_HIGH to lower IRQ priority level in comparison
to LLL IRQ priority level. If BT_CTLR_ZLI is enabled,
BT_CTLR_ULL_HIGH_PRIO can default to a priority level value
of 0 and still be lower priority level than the LLL which
is placed at Zero Latency IRQ priority level (highest
priority in the CPU).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
As network_decode needs a target buffer for decoding, the max PDU length
must be checked to prevent overflow on the target buffer. When receiving
a proxy configuration message with excessive length, there's no previous
check for this.
Also pulls the NET PDU length defines out into net.h, so they can be
used when defining the target buffers.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Fix Tx Buffer Overflow caused by uninitialized node_tx
memory being used by ULL ISR context due to Compiler
Instructions Reordering in the use of MFIFO_ENQUEUE.
The MFIFO last index was committed before the data element
was stored in the MFIFO due to Compiler Instructions
Reordering.
This is fixed now by adding a Data Memory Barrier
instruction alongwith a compiler memory clobber.
Fixes#30378.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use of Data Memory Barrier instruction with memory clobber
in ARM Cortex M architectures is sufficient in the
controller implementation to keep compiler data access
instructions in order so that an ISR vectoring has memory
accesses in the correct order as intented by design.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Mark the option BT_FIXED_PASSKEY as an insecure option.
During Legacy pairing the passkey is used as encryption key, and
brute-forcing this is easy.
During LE Secure Connections the passkey is checked one bit at a time,
so when it is fixed the passkey can be deduced with series of pairing
attempts.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The Bluetooth SMP protocol depends on the BT_ECC for the LE Secure
Connections pairing. Since this feature cannot be disabled we must
select this dependency.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix fixed passkey for legacy pairing. The pairing procedure fails
because the temporary key (TK) has not been set for this pairing
procedure.
Fix this by always requesting the legacy TK.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix misleading message in the bluetooth shell when the id-create
command returns en error code. In this case both failure and success
messages are printed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add options to control the behavior of the init command.
Option no-settings-load allows the user to create identities
with the id-create command after bt_enable() but before settings_load().
Option no-ready-cb allows the user to test using synchronous enable,
since this sometimes leads to different behavior of the stack.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Prevent the bt_rand function from being called before bt_enable.
Depending on the implementation of bt_rand this function cannot
be called before bluetooth has been initialized. With host supplied
crypto functions the HCI LE rand command is used for example.
The use case for calling bt_id_create before bt_enable is meant for
when the application has storage for the identity instead of the stack.
So we add the requirement that the application has to have storage
for the identity resolving key (IRK) in addition when the local
device is privacy-enabled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix the default ULL_HIGH execution priority to be lower than
LLL execution priority to reduce Radio ISR service latency.
Also, default to Zero Latency IRQ for Radio ISR if enabled
in the kernel.
Fixes#29994.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
ad_len parameter is not length of complete advertising data, but number
of bt_data structs passed to bt_le_per_adv_set_data - we pass only one.
Also memset target buffer before converting hex string so data shorter
than specified will be right-padded with zeroes instead of some
leftovers.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Fix the mayfly callee id for the rx_demux scheduling under
the LOW_LAT_ULL implementation. This could be causing
undefined mayfly execution behavior in nRF51x SoC.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove the deprecated bt_conn_create_slave_le function.
This was deprecated in the 2.3.0 release.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Conform to Bluetooth Specification, if the LE_Scan_Enable
parameter is set to 0x01 and scanning is already enabled,
any change to the Filter_Duplicates setting shall take
effect. Disabling scanning when it is disabled has no
effect.
Fixes#31019.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression in adding the state for Connection Parameter
Request being rejected where in Connection Parameter Request
Procedure state machine was prematurely reset before the
reject PDU was enqueued.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing initialization of ticks_to_offset value on
instantiation of new peripheral context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix repeated offsets in LE Connection Parameter Request PDU
due to rounding errors. Use tick units of connection
interval to calculate the offset units.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix deferred Connection Parameter Request offset population
by introduction of explicit states waiting for the offset
calculations to complete in the ULL_LOW context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix deferred Connection Update offset population by
introduction of explicit states waiting for the offset
calculation to complete in the ULL_LOW context.
Fixes#29636.
The problem was, in an encrypted connection the enqueued PDU
to be transmitted is encrypt in the prepare callback by the
hardware and swapped to a different buffer for transmission;
the deferred offset population did not reflect in the
transmitted PDU as it was filled in the cleartext buffer
while encryption completed into the encrypted buffer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix error introduced by pull request:
https://github.com/zephyrproject-rtos/zephyr/pull/31591
Zephyrs CMake extension function zephyr_library_sources_ifdef()
does not allow to use complex conditions to toggle if
sources should be included in build or not.
It allows to use only single variable as an input for
feature_toggle argument because it is double-expanded
in contition statement in the function.
In case there is a requirement that source file is included
when more complicated condition is true we have to fall-back
to reqular if() statement and zephyr_library_sources().
The fix is required because without it radio_df.c source
is never compiled. If DF functionality is enabled build
will fail because of missing functions implementation.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix implementation to run local peripheral initiated control
procedure with instant in parallel with remote initiated
encryption procedure.
Relates to #28887.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
If a PHY update is waiting for the instant to be reached and the master
starts the encryption procedure, store the pending PHY update procedure
and handle it simultaneously with the encryption setup.
This fix prevents the encryption setup from stalling and thereby timing
out after 40s, after which the master drops the link.
The ll_conn::llcp::encryption can not longer be unioned with the
ll_conn::llcp:phy_upd_ind as one would overwrite the other.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Add conditional compilation on peripheral and central
specific control procedure implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix BIG Sync Terminate Command to generate Sync Established
event if Sync initiation is in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added missing allocation of node rx buffer required for
generation of Broadcast ISO Sync Established.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The net_buf was never unref'ed when the host received an
ISO package that was a SINGLE.
Also adds a few additional debug messages.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
`iso send` may take an optional "count" parameter but the
number of optional arguments was incorrect.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The DF tests are implemented to be executed with nrf52_bsim platform.
The nrf52_bsim platform does not include Direction Finding Extenstion.
Due to that, radio_df.c compilation failed with error about missing
antenna configuration in DTS.
To solve the problem, I've changed nrf.cmake to include radio_df.c
file when CONFIG_BT_CTLR_DF is defined and CONFIG_SOC_SERIES_BSIM_NRFXX
is not definded.
Thanks to that any other platform is not affected. The file will not
build if there is no appropriate configuration or there are missing
features in a hardwared.
Unit tests have provided stub imlpementation or radio functionality.
If nrf52_bsim has implemented Direction Finding Extension, the
DF unit tests code will stil work and will not require additional
changes. Also content of the file is not affected by contional
compilation entries.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Remove ATT modifying the L2CAP channel state by unassigning the
the connection pointer on timeout.
Unassigning this pointer does not prevent the ATT channel from receiving
since bt_l2cap_recv does not inspect this pointer before calling the
channel receive function.
This prevented the disconnected callback from being called on the
channel after the channel had timed out, but since the disconnected
callback now handles this case this workaroun is no longer needed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Handle ATT timeout on disconnected ATT channel.
When the ATT channel is disconnected with a pending request the ATT
timeout is canceled and the response processed with an error code.
However canceling of delayed work is not guaranted to succeed, e.g:
"Work queue thread has removed the work item from the queue but has not
called its handler"
This could lead to timeout handler being invoked after the disconnected
handler.
Fixes: #29098
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix compilation error caused by use of wrong header file:
nrfx/hal/nrf_radio.h instead of hal/nrf_radio.h.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Coded PHY is only enabled by default if the application is using
BT_HCI_RAW.
Coded PHY is not needed in most applications.
By disabling Coded PHY, most applications will:
* Get smaller in terms of flash and ram usage
* Not get vurnerable to devices trying to switch to Coded and
thereby increasing power consumption.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Fix compilation error if CONFIG_BT_CTLR_DF is not defined.
If DF was not enabled, there was missing CONFIG_BT_CTLR_DF_MAX_-
ANT_SW_PATTERN_LEN and undeclared symbol was found.
Split ll_df.h into two parts:
- ll_df.h that is generally includeable and allows to successfully
compile sources when DF is not enabled.
- ll_df_internal.h to be used in soucres that are compiled when
DF is enabled.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Direction Finding requires initalization of a set of registers
in Radio peripheral. Also it requires information about antenna
matrix unit that are provided by end user in DTS overlay.
Implemented initialization step is responsible for validation of
hardware information delivered by DTS and setting up DF related
registers in Radio.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add support for Direction Finding antenna configuration in
Nordic hal of Bluetooth controller.
Add handling of response for HCI_LE_Read_Antenna_Information
HCI command in controller (upper and lower link layer).
Handling of response to the command requires antenna matrix
configuration.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
After nrfx glue code was decoupled from nrfx sources, it is no longer
feasible to use those inclusions in the <nrfx/hal/nrf_*.h> form (there
is no point in adding the main directory of the hal_nordic module as
an include path solely for this reason). Remove then the nrfx/ part.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Fix size of L2CAP disconnect request buffer pool which did not include
the size of the L2CAP signal header.
Regression from: 3346aa4d39
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Defined 625 and 1250 as context specific interval common to ULL and LLL.
Checked with bluetooth sanity checks.
Fixes#23314.
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Some proprietary protocols that reuse the Bluetooth LLCP logic requires
that the CPR interval has a valid range that differs from the Bluetooth
specification defined.
Vendor must implement the function (ull_vendor.h)
uint16_t ull_conn_interval_min_get(struct ll_conn *conn)
that returns the valid limit for the given connection.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Allow vendor specific increase of user operation capacity for LLL, to
support queuing additional ticker operations from lower link layer
context. These would typically take place in lll_xxx_prepare.
Signed-off-by: Morten Priess <mtpr@oticon.com>
For Bluetooth Mesh, counter shall be increasing by one when
every try to establishing friendship.
Counter to be used when create friendship security material.
So this value shall be consist between friend and lpn.
Due to zephyr bluetooth mesh send previous counter, after that
it will automatically increase one, which will result in the
incorrect generation of friend key when key rephase.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
The mesh settings.c module is a giant piece of code responsible for
storing the mesh stack configuration. Such approach makes it difficult
to control the data to be stored, breaks the stack modules'
encapsulation by forcing them to reveal the internal kitchen, which
leads to unpleasant issues such as #19799.
This commit moves the responsibility of storing the configuration
to corresponding modules while keeping control of the moment of storing
the configuration and of starting the stack after the settingss loading
is completed.
This doesn't introduce any abstraction between the mesh settings.c and
other modules as it will add more complexity and overhead than necessary
for the actual task.
Fixes#19850
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add public function to set Constant Tone Extension transmission
enabled or disabled for periodic advertising.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Enable CTE HCI command requires update of a state of its
execution after receive command completion response from
controller. Host has already implemented such functionality
but it was used only internally by hci_core.
This commit changes it to be accessible from other sourece files
in host.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add implementation of HCI_Set_Connecitonless_CTE_TX_Enable
command to HCI. Add scratch implementation of command handling
functions to controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix compilation error caused by missing header files.
Reorganized order of header files include.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Correct names of kconfig entries to mach to style of other entries.
Style correction in hci.c. Use the same approach of checking if
Kconfig entry is enabled.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
MESH/NODE/CFG/HBS/BV-01-C expects the MinHops to be 0x7f after
disabling subscription, but 0x00 for subsequent Get requests.
MESH/NODE/CFG/HBS/BV-02-C expects us to return previous
count value and then reset it to 0.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
This is a pairing function with bt_le_scan_cb_register()
to used for remove the scanner callback from callback list.
Signed-off-by: chao an <anchao@xiaomi.com>
Fixed misalignment of bitflag in ll_conn type causing unintentional
overwrite between unions. Common flag must be present in master/slave
uinons as well. Problem is only present when enabling feature
CONFIG_BT_CTLR_CONN_META, which is default disabled.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Reserve two link rx buffer for each supported Broadcast ISO
sync instance, for establishment and for sync lost node rx
generation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
For tx_power_max_get and tx_power_floor, only allow for
positive values of txpower if they are defined.
Signed-off-by: Aurora Sletnes Bjørlo <aurora.sletnes@nordicsemi.no>
Rename Kconfig BT_CTLR_SCAN_SYNC_ISO_MAX to
BT_CTLR_SCAN_SYNC_ISO_SET, to be consistent with other
Kconfig naming.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
AUX_CONNECT_RSP PDU static buffer definition was missing one
byte required for the Extended Header Flags.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Document with comments, the explanation of node rx count and
the design of the free rx PDU management.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix for scenarios where in active PHY Update Procedure or
Connection Update Procedure could cause temporary depletion
of the free Rx PDUs in the queue between LL/HCI thread
context to LLL context. Symptoms being on-air NACKing during
the above said procedures, causing supervision timeouts due
to procedures not completing at instants.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the implementation of PA/LNA PPI configuration
which was done on every Tx or Rx as common code to be
executed once per radio reset. And only setup the timeout
and enabling of PPI at every Tx or Rx.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
For PA/LNA implementation use NRF_P0/P1 defines instead of
the deprecated NRF_GPIO to reference GPIO Port 0 registers.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the missing GPIOTE channel disable when GPIOTE channel
is alternately used between PA and LNA use.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression in PA/LNA support wherein the GPIO pins where
left in undefined state after each radio event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression, add back missing call to radio_setup HAL
interface. This is needed to setup the initial PA/LNA GPIO
states.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix crash in ATT when the response for a request is received after
the ATT timeout has fired and the ATT channel has been detached.
Add similar handling for all ATT channel operations.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
SWI IRQ line mapping for nRF5340 shall use
CONFIG_SOC_NRF5340_CPUNET for conditional compilation
instead of the board define, so as to allow new boards to
use the BLE controller implementation.
Fixes#30488.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add publicly accessible function to set Constant Tone Extension
parameters for CTE transmission with periodic advertising.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add implementation of a wrapper for HCI_LE_Set_-
Connectionless_CTE_Transmit_Parameters send command.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add Direction Finding to host initialization sequence.
It allows to get information about Direction finding
optional CTE settings supported by controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Remove is_enabled flag in LLL of BIS events context, as the
status returned from ticker_stop interface is sufficient to
determine if the Broadcast ISO Sync was established or not.
HCI Command Disallow as reason is to be returned if sync was
not established or sync was loss prior to call of HCI LE
BIG Terminate Command was called.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move lll_sync_iso.h as common to all vendors, as currently
there is nothing that is vendor specific.
Fixes#31044.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When using BT_GATT_AUTO_DISCOVER_CCC if the ccc_handle is not set
bt_gatt_subscribe would initiate a discovery to locate the CCC handle
but instead of awaiting it to complete the code does proceed to call
gatt_write_ccc even with ccc_handle being 0x0000 which is invalid.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
We have convenient PHY_1M, PHY_2M and PHY_CODED symbols defined but
they are not used too much in the code. This replaces all usages of
magic numbers and other symbols as PHY constants with those symbols.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Adds an assert on the "old" ref counter when doing unref, that
checks if there indeed is a reference to unref. This prevents
any underflows of the ref counter.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Implements the ull_sync_iso_setup function which starts the
ticker for ISO sync. Furthermore, ll_big_sync_terminate
will not stop the ticker as well.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Implements handling of the BIG sync commands in the ULL.
LLL support and handling of ACAD (biginfo) remaining.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adjust the PPI used by nRF51x and nRF52x so that PPI 0-5 is
available for application's use or for SW PWM driver use.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Under CONFIG_BT_TICKER_EXT configuration, the ticker interface has been
extended to support enabling/disabling must-expire scheduling. This
means that conn and slave ticker start calls can now omit must-expire
default-on configuration, relying on LLL updating the mode as needed.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Align bt_le_per_adv_sync_get_index, bt_conn_index and
bt_le_ext_adv_get_index in use of uintptr_t.
This fixes an issue where the cast to uint8_t happened before the
assert for a valid index, which could lead to invalid pointers passing
this assert.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Improve logging of pairing procedure when it fails with error code
unspecified. Since this is returned in many places debugging this
failure is not easy without adding additional debugging.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix parallel pairing procedures using LE SC requiring the DHKey
calculation at the same time. This would otherwise end all other
pairing procedures with the SMP error code "unspecified" since
the call to bt_gen_dh_key would fail.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Set the allowed command bitmask before sending the SMP packet. This
avoids a race-condition in case the sending of the PDU made the
current thread not ready and would not be scheduled back in time
to set the bit before receiving the next SMP packet.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Improve multiple DHKey handling by allowing the next DHKey calculation
to be started in the dhkey ready callback.
Return error code EALREADY if the provided callback is the current
callback generating the DHKey.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
We allocate nodes on receiving AUX_CONNECT_REQ, but we can only use
them if AUX_CONNECT_RSP is sent successfully. If that fails, we need
to release those nodes.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
If we allocate a node in LLL and it turns out that we don't need it
(e.g. allocated connection on AUX_CONNECT_REQ, but connection handshake
did not complete and we don't need it) we still need to send it to ULL
to be released. We can use existing NODE_RX_TYPE_DC_PDU_RELEASE node
type for this purpose, but we just need to make sure it's passed from
LLL to ULL properly.
Also, since this now does not only release DC PDUs, let's change its
name to a more generic one.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
After slave connection is created only adv instance is stopped, we also
need to stop aux separately if enabled.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Make sure phy is properly initialized to 1M when ext adv is supported
and legacy advertising instance is being enabled.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This adds handling for received AUX_CONNECT_REQ PDU which enables slave
connection with extended advertising.
Once AUX_CONNECT_REQ is received, standard checks are performed to
determine if we have resource to create connection, however unlike for
CONNECT_IND an rx node is temporarily kept in LLL until AUX_CONNECT_RSP
is successfully sent. This is to prevent creating a connection in case
response PDU was not sent for whatever reason.
A separate scratch buffer is created for AUX_CONNECT_RSP since default
radio scratch buffer is already used by received AUX_CONNECT_REQ.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Connection structs need to be initialized when advertising is enabled
on connectable extended advertising instance.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Connection created from extended advertising instance uses the same phy
as on secondary channels.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
transmitWindowDelay is either 2.5ms or 3.75ms when AUX_CONNECT_REQ is
used (for 1M/2M and Coded respectively). It also uses the same unit
as transmitWindowOffset (1.25ms) so we can just simply add both.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
The same helper will be used for legacy and extended advertising so we
better pass AdvA and TargetA directly instead of complete advertising
PDU. This is because those fields are at different locations in legacy
and extended advertising PDUs so caller can figure them out.
Also, we can now check for directed advertising using TargetA since it
will be only supplied for such advertising (NULL otherwise).
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Release the LF clock requested in blocking mode used to wait
to settle, which has already been asynchronously requested.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
