Fix the calculation of event delay when starting a radio
event. The calculation and check was incorrect causing
event abort when radio event was setup before the preempt
timeout by the lll_done when the next prepare was already
in the pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When a CIS indication is received and CIG ticker is already started,
calculate the absolute time of the first subevent of the new CIS,
and validate the handle. This will allow the LLL prepare to see a new
valid CIS, and calculate the offset within the CIG event, where the new
CIS should start. This offset is then valid for all following events for
the duration of the CIS.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Add missing #if defined(CONFIG_BT_CTLR_DF_ADV_CTE_TX) statements
to fix build errors of Direction Finding code when
the CONFIG_BT_CTLR_DF_ADV_CTE_TX Kconfig entry is not set.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Enable possiblity to use debug pins for controller debugging
purposes with nrf52833dk_nrf52833 board.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Splits the file into radio_nrf5_ppi.h and radio_nrf5_dppi.h
and moves the nRF53 DPPI to radio_nrf5_dppi.h.
Signed-off-by: Aurora Sletnes Bjørlo <aurora.sletnes@nordicsemi.no>
Rewrite to use subscribe and publish functions for the
different peripherals. This will make it possible to test
the controller in a simulator.
Signed-off-by: Aurora Sletnes Bjørlo <aurora.sletnes@nordicsemi.no>
The ID validation check would always fail with IDs less than
OTS_OBJ_ID_START_RANGE, where the intention was that it should
allow the OTS_OBJ_ID_DIR_LIST (0) value as well if
CONFIG_BT_OTS_DIR_LIST_OBJ was enabled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix missing big_disconnect in hci_le_big_complete when the number of
BIS in the event is invalid.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Validate the big_handle before received from the controller before
using it as an array into the bigs array.
Discover by coverity: Insecure data handling (TAINTED_SCALAR)
Using tainted variable "big_handle" as an index into an array "bigs".
Cleanup state of BIG in pending or syncing state if it exists.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix parsing BIG handle which is just one octet as a two octet field,
which could have caused problems on big-endian systems.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor the BIG initialized atomic handling to use bits instead of a
single atomic.
This allows for more bit flags to be added.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix race conditional when create connection cancel is called
and actually a connection did get setup while initiator is
being stopped.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Conditional compile adv_addr which is only used by
controller when supporting initiator/central role.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the initiated bit flag into role specific union, so that
other role specific bit flags can share bit space in the LLL
context structure.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix flash driver sync regression introduced due to changed
default ULL_HIGH in the commit 30634334a8 ("Bluetooth:
controller: Fix ULL_HIGH priority to be lower than LLL").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated ticker implementation to return lazy value for a
ticker when enumerating active tickers with time
reservations.
This is required to find offsets and to use the lazy value
to correctly calculate event and payload counter values that
needs to be filled into SyncInfo and BigInfo structures.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
LL_CIS_IND starts a ticker for the created CIG, using the event_counter
and offset provided. Ticker generates callbacks to
lll_peripheral_iso_prepare. Event done with ISO (extra) type is demuxed
and done handled for CIG including ticker update with drift
compensation.
TODO: Handle multiple CISes as well as pause/resume and scheduling
latency.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Implemented LL_CIS_REQ/RSP and LL_CIS_IND handling to allow a central
to establish a CIS connection. Implementation is temporary, for
test/development purpose and should be re-implemented in the new LLCP
framework when ready.
Signed-off-by: Morten Priess <mtpr@oticon.com>
In the file gatt.c, GAP service contains the Device Name
characteristic. If writable, authentication and authorization may
be defined by a higher layer specification.It means that GATT
clients can write to device name GAP characteristic without
bonding. So we add a configuration for writable name without
bonding.
Signed-off-by: Jun Huang <huangjun6@xiaomi.com>
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Adds a check for the BT_LE_FEAT_BIT_PER_ADV bit for each
function related to periodic advertising, including sync and
PAST transfer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix undefined reference to bt_key_foreach when BT_LOG_SNIFFER_INFO has
been enabled but BT_SMP is not enabled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The Configuration Client doesn't check the address in a received
response. This means that a response from any device will be accepted.
This change ensures that the correct response will be accepted.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Fix bluetooth audio compilation issue when BT_AUDIO is enabled but
no Bluetooth host services has been enabled.
This leads to an empty library file.
Instead of creating a new library for audio add the sources to the
parent library, similar to how bluetooth services are added.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
VOCS does not support the write long procedure, and thus
should not accept any offset in write requests.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This adds bt_conn_iso function to safely access the struct bt_conn_iso
within a bt_conn.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Channel direction was actually a source of confusion since the spec does
actually define the data path direction from controller point of view
meaning input actually means transmit and output receive, also direction
can be configured with different QoS settings.
To make these APIs less confusing and allow QoS to be configured
independently they are now split into RX (receiving) and TX
(transmission) settings including its data path.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
CHECKIF is preferred as it handles full runtime error handling in
addition to just asserts.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes bt_iso_cleanup when there are still channels bound to the
ACL connection.
On top of it introduce bt_iso_chan_unbind which can be used to unbind
channels and thus release the reference to the ACL connection if that
has not been disconnected in which case the channels are unbind
automatically.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When the channel has just been bound but is not connected yet there is
no need to send any command over the air but the disconnected callback
shall still be called in order to notify the channel owner that it has
reached disconnected state.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When initiating a disconnection conn_disconnect would be called to send
HCI_Disconnect but the controller may be quick enough to send Disconnect
Complete event before setting BT_CONN_DISCONNECT which will then cause
the invalid transition from BT_CONN_DISCONNECTED to BT_CONN_DISCONNECT
and the connection won't be freed properly.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
