Return BT_HCI_ERR_INVALID_CONN_ID if an invalid handle is
given by the HCI; currently sometimes BT_HCI_ERR_CMD_DISALLOWED
is returned
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Core 5.2, Vol 4, Part E, section 5.3.1 clarifies that advertising set
handle is assigned by host when advertising set is created and this
happens only on LE Set Extended Advertising Parameters.
An advertising set handle is an arbitrary number within allowed range,
i.e. 0x00-0xEF and not 0..max_supported-1.
This patch adds option to enable advertising set handle mapping from
HCI range as defined by Core specification to zero-based handles used
by LL. If enabled, HCI handle will be remapped to LL handle for each
command, otherwise HCI handle will be used as an LL handle. The latter
effectively skips mapping logic and should be used with Zephyr host
which uses zero based indexes.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
There's not need to mark advertising set as created by either legacy
or advertising command since this is determined by current so-called
HCI advertising mode which determines whether host uses legacy or
extended advertising commands.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
As per Core 5.2, Part B, section 3.1.1 controller should not allow
mixing of legacy and extended advertising commands. Once 1st command
is received from host, we should only allow commands of the same type
and return an error on other commands.
If legacy advertising interface is selected by 1st command received,
we need to make sure that set with handle=0 is created since it's
used by all legacy commands.
When not using external host, we assume that only extended advertising
interface will be used thus all checks can be skipped (optimized and
compiled-out).
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
A lot of commands return CC event with status parameter only, especially
when error is returned. This patch adds a helper to create such event,
similar to cmd_status.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Proper error code should be returned if advertising set with given
handle does not exist instead of generic "invalid parameters" one.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
AdvA in extended advertising PDUs is put at different offset than in
legacy PDUs thus it's better to let caller calculate and pass AdvA and
TxAdd explicitly. This way we won't need to check whether scan request
was on legacy or extended PDU every time.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
When a connect indication contains a channel map of all zeros, the
adv->conn is left NULL'ed after return and next connect attempt leads
to a crash.
This was identified via the Sweyntooth test suite executing the script
re. issue 6.14 towards an Oticon target.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
It does not auto-initiate the DLE procedure if the default data length
parameters are not equal to the initial parameters.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Fix incorrect use of LLL ticker user id in ULL_LOW execution
context.
Regression introduced in commit 23ef75f6d9 ("Bluetooth:
controller: split: Fix Low Latency Prepare Done").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fill the referenced event counter of the Periodic
Advertising SYNC_IND PDU into the sync info struct in the
Common Extended Advertising Header Format.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fill the missing Periodic Advertising interval in the
Extended Advertising Report when Auxiliary PDUs contain
Sync Info fields.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move implementation of hci_driver.h exposed functions to a common file.
The functions exposed by hci_driver.h header file is implemented in
either hci_core.c, or hci_raw.c. But since these functions would be
identical for both implementations have them in a new file that is
included for both.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Defined struct in node rx for passing event parameters of
Advertising Set Terminated Event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implementation of Advertising Set Terminated Event on
duration sans use of additional variable in advertising
set context structure.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated implementation to have consistent initialization of
ret_cb use when passing it to ticker function calls.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
By splitting it out to a separate file, it will become easier to
separate generic and non-generic controller features.
This commit only contains the simple extraction.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Fixed memory corruption when using uninitialised previous
PDU to populate current PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enforce support for Read RSSI command if BT_CONN and BT_HCI_RAW are
selected. According to the Bluetooth specification, support for the
Read RSSI command is mandatory if the Connection State is
supported. BT_HCI_RAW indicates that the controller is an
independently qualifiable module and not part of a combined
host/controller build. This change avoids a configuration that cannot
be possibly qualified.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Refactor implementation to perform enable and started state
updates at consistent places in code.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to acquire and initialize auxiliary
channel instance on use of periodic advertising.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable Advertising Extensions by default if supported by the controller.
That is, do not enable it by default for BT_LL_SW_SPLIT.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Change sets default value of Kconfig option BT_CTLR_LLCP_CONN to
BT_MAX_CONN. The default value should properly handle the worst case.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Fix missing recalculation of skip value of the ticker being
inserted into ordered list, when it collides and is being
attempted to be inserted at next periodic interval.
This fix is for ticker compatibility mode which is used as
default for nRF51 series.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix flash operation timeout due to incorrect use of
secondary ticker to abort any radio in use. Ticker id 0
is reserved for split controller's pipeline preempt timeout.
Using the same ticker id caused the secondary ticker to
not be started if controller is using the same ticker id
for pipeline preempt timeout.
Fixes#26333.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix host RX thread being deadlocked. The deadlock occurs because the
RX thread is stuck waiting in conn_tx_alloc with K_FOREVER but if the
connection is disconnected only the RX thread can unblock it in the
handling of the disconnect event.
This commit fixes this deadlock by splitting the processing of the
disconnected event into two parts.
The part needed to unblock the RX is to release resources held by
unack'ed TX packets and mark the connection state as not connected
anymore.
The RX thread waiting for free_tx fifo and the TX thread waiting for
the bt_dev.le.pkts semaphore will both check the connected state after
having acquired them and will abort if disconnected.
The rest of the processing will be handled at normal RX thread
priority like normal.
Move the bt_recv_prio handling to the Bluetooth host when the host
has defined its own RX thread (CONFIG_BT_RECV_IS_RX_THREAD=n).
If the HCI driver has the RX thread (CONFIG_BT_RECV_IS_RX_THREAD=y),
then the responsibility to call bt_recv and bt_recv_prio correctly
falls to the HCI driver.
The helper function bt_hci_evt_is_prio() is replaced with
bt_hci_evt_get_flags() so that the HCI driver can do this correctly.
This decision to replace was made so that existing HCI drivers
maintained out-of-tree will fail at compile time with the new system.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Bluetooth: host: Move bt_recv_prio to host when RX thread is defined
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix issue with directed advertiser not accepting connection request
from non-privacy enabled peer that has given us a non-zero IRK.
When device privacy is enabled then ull_filter_lll_rl_addr_allowed will
return true, and update the rl_idx to entry in the resolving list.
When the directed advertiser is not privacy enabled then lll->rl_idx is
set to FILTER_IDX_NONE and will not use RPA for the target address.
The check rl_idx != lll->rl_idx will then fail (0 != 0xff) and the
connect request is denied, even though all addresses matches on-air.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add explicit opcode check when handling received unknown
response PDU.
Without this, for example, an in progress Data Length Update
procedure state was reset when receiving an unknown response
to slave initiated feature request.
Fixes#26252.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Disable the controller advertising extension feature default setting
until the feature is complete. The zephyr host requires the
LE Advertising Set Terminated event to function.
Without this event a peripheral connection cannot pair because the
local on-air address is not set, and the advertising state will not be
cleaned up, so advertising cannot be started again.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use the NRF RNG entropy device as the entropy device for bt_rand and
controller internal functions when LLL is Nordic.
Using an entropy source with a significant increase in stack usage
will invalidate all stack size configurations in the system and lead
to stack overflow issues.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix compilation regression due to addition of const
qualifier to tx_pwr_lvl parameter of ll_tx_pwr_lvl_set
function. Support for BT_CTLR_TX_PWR_DYNAMIC_CONTROL
needs the tx_pwr_lvl to be updated and returned.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
For some reason GCC 9.x doesn't seem to be able to realize that set_num
will always be > 0 and so the local variable status will always be
initialized. Use a do {} while instead to keep it happy.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix missing implementation of initialization of common
advertising header bit fields when new auxiliary channel PDU
is instantiated. This caused corrupt invalid Bluetooth
Device address being copied from uninitialised previous
auxiliary PDU instead of copying from primary channel PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Review rework, added comments, TODOs, FIXMEs and converted
magic number use in advertising set state flags to defines.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added comments and code to make note that disabling all
advertising sets is not yet implemented.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor pdu.h defined in anticipation of reused in
Advertising Extensions implementation. To reuse in
calculating ticks_slots etc.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix segmentation fault detected by BabbleSim test due to
incorrect number of tickers being allocated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Avoid ticker from null pointer dereferencing when storing
operation callback functions to be called during collision
resolution.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix scan set allocation using BT_CTLR_SCAN_SET instead of
an incorrect duplicate BT_CTLR_SCAN_MAX.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Integrate the generated extended adv report PDU list into
HCI layer to generate the HCI LE Extended Advertising Report
event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Change the implementation of extended scan PDU rx list to use
the extra pointer as the next field in the linked list node.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing Auxiliary PDU when primary PDU is calculating
the offset. Schedule the auxiliary PDU ticker before primary
PDU ticker is scheduled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the Low Latency Prepare Done that disables ULL_LOW
context executions inside a radio event, so that
ticker_job_idle_get is invoked from ULL_LOW instead of LLL
context so that its enqueued alongwith others scheduled
in ULL_LOW. This is avoid premature disable of ULL_LOW
context executions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When Privacy is not supported in the build and Advertising
Extensions is enabled, HCI LE Enhanced Connection Complete
event was missing. This is fixed now.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect adv_addr type in auxiliary PDU when address
is removed from primary and added to auxiliary PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to calculate the window widening for
the reception of auxiliary PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix to avoid a crash due to missing aux_ptr in current
primary PDU constructed by LE Set Extended Advertising
Parameter Set, while aux_ptr was populated by LE Set
Extended Advertising Data Set in the latest double buffered
PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to handle updates to adv mode and event
properties of an already created advertising set.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix collision resolution to consider single-shot ticker,
current single-shot with ticks_slot as older that a next
periodic or single-shot ticker with ticks_slot.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ticker to correctly generate the operation callback if
single-shot ticker fails to be scheduled and does not
expire.
As the collision resolution is deferred to the worker, if
a single-shot ticker is cancelled, then appropriately call
the operation callback with failure status. This is allow
the user to take necessary actions, like release resources
allocated that need to be release on the failure to schedule
the single-shot ticker expiry.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the definition of PKT_US into pdu.h so that it can be used
by Advertising Extensions implementations too.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove us_radio_rdy field in the footer structure as its always
a constant value which can be obtained using a functional
interface to HAL.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix legacy advertising started using Extended Advertising
sets to use the set advertising random address.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing reset of phy struct member for scan set that is
not being enabled by use of LE Extended Scan Parameter Set
command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Allow use of HCI LE Set Random Address cmd when advertising
is enabled using Extended Advertising commands.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix, use phy variable instead of type to determine if
scanning on Coded PHY is to be enabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to generate LE Extended Advertising
Report for received legacy PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing reset of scanner state which could cause a
spurious SCAN_RSP packet without a prior SCAN_REQ being sent
to be reported.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to support setting of legacy
Advertising Data and Scan Response Data using Extended
Advertising Data set functions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Differentiate call to ll_adv_params_set, whether used by
legacy LE Set Advertising Parameters or LE Set Extended
Advertising Parameters.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable Advertising Extensions features in the controller
when enabled in the Host in combined host+controller based
applications.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update implementation of periodic advertiser's LLL to
correctly handle event counter values when latencies
introduced due to sync events cancelled by active events
operating in unreserved time space.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update implementation of master and slave LLL's to correctly
handle event counter values when latencies introduced due to
connection events cancelled by active events operating in
unreserved time space.
When an active radio event extends into unreserved time
space, and a connection event prepare is scheduled but at
the time of pre-emption timeout if the connection event is
cancelled then the event count and latencies needs to be
continiued to get acummulated.
In the current controller usecases the above scenarios does
not get exercised, the changes in this commit is needed for
future roles that can extend into unreserved time space and
would cancel a scheduled connection event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix conditional compilation of advertising extensions and
periodic advertising do that platforms with not support in
their LLL can be built without advertising extensions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix conditional compilation of piggy back implementation.
This code should be deleted once periodic advertising
implementation is complete.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor to reuse common repeated code in ISR that reset
status, and performed abort, done and cleanup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to support ADV_EXT_IND PDU with AuxPtr.
Changes in this commit only prepares the ADV_EXT_IND PDU
in the primary channel.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added debug information print outs in HCI code related to
Advertising Extensions events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for Bluetooth Controller GPIO Debug Pins for
nRF5340 PDK board. GPIO Pin toggling can be captured on the
P3 pinhead of the PDK.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Port advanced scheduling implementation from legacy
controller.
This implementation schedules
- non-overlapping scan window when there are simulataneous
central connections active
- central connection establishment with similar connection
intervals be placed in a non-overlapping group, temporally
- connection parameter request with calculated window offset
hints to have non-overlapping BLE radio events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a function to reset the variable holding the connection
context of the currently active Connection Parameter Request
Procedure.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Address the nRF5340 Engineering A Errata 16, RADIO: POWER
register is not functional.
This affects the dependency of controller's HAL
implementation that expected correct reset values being
set in the Radio peripheral.
As the SUBSCRIBE_TXEN and SUBSCRIBE_RXEN where not in their
reset value, Radio transmission and reception start using
DPPI was broken.
Fixes#25942.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implemented an intermediate decrypt buffer to cover the CCM
overrun under CRC error conditions. The workaround is
applicable to nRF52832 SoC only, which is missing the
MAXPACKETSIZE register in the NRF_CCM peripheral.
Fixes#21107 for nRF52832 SoC.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing assignment of NRF_CCM->MAXPACKETSIZE register
for PDU sizes smaller than 251 bytes. If there is CRC errors
causing PDU length fields to be higher than configured PDU
buffer sizes in the controller, without the MAXPACKETSIZE
register set to correct PDU size, CCM module could overrun
the PDU buffer and cause memory corruption. This fix is
applicable for all nRF52 Series SoCs except nRF52832 SoC.
Fixes#21107.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The existing feature exchange procedure does not give the proper
response as specified in the BT core spec 5.0.
The old behaviour is that the feature-response returns the logical and
of the features for both peers.
The behaviour implemented here is that the feature-response returns the
featureset of the peer, except for octet 0 which is the logical and of
the supported features.
Tested by using the bt shell, and having different featuresets
on the 2 peers.
This fixes#25483
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Fix missing transmit buffer demutiplexing before checking if
slave latency needs to be maintained or cancelled.
This bug was detected when new transmit buffer was enqueued
overlapping with on-air radio transmission of empty PDU
preceding the handling of radio event done.
Symptoms of this bug being data transmission latency of upto
slave latency plus one times connection interval.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit adds support for bluetooth in nRF52820 SoC.
Bluetooth radio related files created and added to Zephyr.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
With BT_CTLR_USER_TICKER_ID_RANGE it is possible for vendors to add a
number of ticker nodes for proprietary purposes. The feature depends on
BT_CTLR_USER_EXT.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Split BT_CTLR_CONN_RSSI option into two, the base option enables the
Read RSSI command, while the new BT_CTLR_CONN_RSSI_EVENT enables the
connection RSSI events. There is no handling of RSSI events, only a
BT_INFO log.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Convert bluetooth controller to using the new k_timeout_t API so that
CONFIG_LEGACY_TIMEOUT_API can be turned off.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove logging of individual threads spread out throughout the
bluetooth subsystem. The stacks can be analysed by enabling the
following options.
CONFIG_THREAD_ANALYZER=y
CONFIG_THREAD_ANALYZER_AUTO=y
CONFIG_THREAD_ANALYZER_RUN_UNLOCKED=y
Optional:
CONFIG_THREAD_NAME=y
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix local RPA field for the legacy controller. This failed without
compilation errors because of blind pointer cast between two
structs of similar definition.
Set the local RPA field of the enhanced connection complete event only
when the address was generated by the controller. If the host has
set an RPA and this one was used the controller should return all
zeroes.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Set the local RPA field of the enhanced connection complete event only
when the address was generated by the controller. If the host has
set an RPA and this one was used the controller should return all
zeroes.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This is a rework for OpenISA SW LL of
"b7220cef86 Bluetooth: controller: split: Fix densely scheduled event
preemption"
Fix LLL implementation handling preemption of currently
active radio event with densely scheduled events in the
pipeline.
Preempt timeout was stopped without consideration to there
being more queued events in the pipeline. Also, added
chaining of preemption timeouts one after the other expiry
so as to preempt currently active events by the densely
scheduled events in the pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
This is a rework for OpenISA SW LL of
"b0826a7f65 Bluetooth: controller: split: Reduce time to setup tIFS
switch"
Refactor to reduce the setup next tIFS switch within tIFS
period of the Radio ISR.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
This is a rework for OpenISA SW LL of
"4547bfb452 Bluetooth: controller: split: handle latency for cancelled
conn events" as well as subsequent fixes
Update implementation of master and slave LLL's to correctly
handle event counter values when latencies introduced due to
connection events cancelled by active events operating in
unreserved time space.
When an active radio event extends into unreserved time
space, and a connection event prepare is scheduled but at
the time of pre-emption timeout if the connection event is
cancelled then the event count and latencies needs to be
continiued to get acummulated.
In the current controller usecases the above scenarios does
not get exercised, the changes in this commit is needed for
future roles that can extend into unreserved time space and
would cancel a scheduled connection event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
This is a rework for OpenISA SW LL of
"62c1e1a52b Bluetooth: controller: split: Fix assert on invalid packet
sequence"
Fix to remove assertion failure check on detecting invalid
packet sequence used by peer central and that no non-empty
packet was transmitted.
Fixes#22967.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
When receiving an unknown command send the unknown command response
as a command status event instead of a command complete event.
A command complete event has no status field, although by convention
all command parameters has a status field as the first parameter the
command status event seems like the more fitting option.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This patch adds the selection of the necessary CONFIG_*
options for allowing the use of privacy on VEGA platform
Signed-off-by: Jeanina Dragusin <ancajeanina.dragusin@nxp.com>
The radio on the VEGA platform will now be able to resolve Resolvable
Private Addresses through the use of the CAUv3 hardware. With this
patch the RPA feature is now fully supported on the Controller:
RPA addresses are generated with local IRK and resolved with
previously exchanged peer IRK.
Signed-off-by: Jeanina Dragusin <ancajeanina.dragusin@nxp.com>
Replace CONFIG_ENTROPY_NAME with DT_CHOSEN_ZEPHYR_ENTROPY_LABEL. We now
set zephyr,entropy in the chosen node of the device tree to the entropy
device.
This allows us to remove CONFIG_ENTROPY_NAME from dts_fixup.h. Also
remove any other stale ENTROPY related defines in dts_fixup.h files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The LE Connection Complete HCI event, unlike its Enhanced counterpart,
only uses 0x0 and 0x1 for Peer Address Type. Fix it so that it reflects
the specification correctly.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This PR fixes#23482. The preamble size for a 2M phy was incorrect.
There is a bug in calculation of time for the DLE procedure:
the preamble size is incorrect for the 2M phy
Fixes#23482
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
For the ll code we know the exact entropy device as its the one for the
SoC that we are on. So use the new DT macro's to get the entropy device
via DT_INST rather than using CONFIG_ENTROPY_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The board target for emulation of nRF52810 on nRF5DK, so far
known as nrf52810_pca10040, is renamed to nrf52dk_nrf52810.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The board name for the nRF52 DK, so far known as nrf52_pca10040, is
renamed to nrf52dk_nrf52832. Its documentation and all references
to its name in the tree are updated accordingly. Overlay and
configuration files specific to this board are also renamed, to
match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update implementation of master and slave LLL's to correctly
handle event counter values when latencies introduced due to
connection events cancelled by active events operating in
unreserved time space.
When an active radio event extends into unreserved time
space, and a connection event prepare is scheduled but at
the time of pre-emption timeout if the connection event is
cancelled then the event count and latencies needs to be
continiued to get acummulated.
In the current controller usecases the above scenarios does
not get exercised, the changes in this commit is needed for
future roles that can extend into unreserved time space and
would cancel a scheduled connection event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Most places used an int so that should have handled most cases but
keys_set was using an unsigned int, which meant that checking len > 0
is an expression that is always false, and the error handling is not
working.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix regression in cancelling slave latency during Connection
Update Procedure.
Slave latency should not be applied between the ack of a
Connection Update Indication PDU and until the instant.
When caching was introduced, implementation missed this
consideration.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Ticker is now fixed to avoid catch up of periodic timeout under
large ISR latencies.
Revert commit a749e28d98 ("Bluetooth: controller: split:
nRF: Use ticker compat mode as default").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
If must_expire is set for a ticker instance, then ticker
expiry shall still perform catchup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Reset ticker state in ticker_job for ticker instances that
have been skipped in the ticker_worker.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ticker to avoid catch up of periodic timeouts in case of
large ISR latencies like in case of flash erase scenarios.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression in cancelling slave latency during Connection
Update Procedure.
Slave latency should not be applied between the ack of a
Connection Update Indication PDU and until the instant.
When caching was introduced, implementation missed this
consideration.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Simplify the Data Length Update Procedure state check when
processing incoming LENGTH_REQ/RSP PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Simplify the Data Length Update Procedure state check when
processing incoming LENGTH_REQ/RSP PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add validation of channel map and hop increment value
received in CONNECT_IND PDU.
Zero bit count leads to controller assert or divide-by-zero
fault.
Hop increment shall be between 5 and 16 by BT Specification.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add validation of channel map and hop increment value
received in CONNECT_IND PDU.
Zero bit count leads to controller assert or divide-by-zero
fault.
Hop increment shall be between 5 and 16 by BT Specification.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Deprecate BT_LE_ADV defines in hci.h that are expected to be used by the
application in the scan received callback to identify the advertising
PDU type. These defines are mixing HCI input parameters and advertising
PDU types. Internally it is acceptable to mix these, but at the API we
should to mix in them.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Minor optimization to use a local variable instead of a
deferencing of a struct member.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Update the ticks_current value on last stopped ticker
instance, so that when a new ticker instance is started
the anchor ticks calculation uses the correct current tick
with respect to supplied anchor ticks.
Fixes#23805.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove use of k_cpu_idle in controller, and refactor the
implementation used to start, wait and stop clocks needed
by the controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
We rename the nRF51 Dev Kit board target (nrf51_pca10028)
to nrf51dk_nrf51422. We update all associated references
in the supportive documentation and all nRF51-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add header definition for bt_read_static_addr function. Declaring it
without a header definition will not give any compilation error when
function definition changes.
Refactor nRF SoC specific code into nRF specific source files and
provide weak definitions when these are not implemented. This will make
it easier to add handlers per vendor.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This reverts commit 8739517107.
Pull Request #23437 was merged by mistake with an invalid manifest.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
A bug in the PKT_US resulted in wrong calculations for the 2M phy.
Fixes the bug, verified on EBQ.
Also adds some defines for improved readability.
Fixes#23482
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Fix LLL implementation handling preemption of currently
active radio event with densely scheduled events in the
pipeline.
Preempt timeout was stopped without consideration to there
being more queued events in the pipeline. Also, added
chaining of preemption timeouts one after the other expiry
so as to preempt currently active events by the densely
scheduled events in the pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression in handling invalid packet sequence in the
first packet in a connection.
This relates to commit 62c1e1a52b ("Bluetooth: controller:
split: Fix assert on invalid packet sequence")
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression in handling tx pool corruption in relation to
commit 7a3e29af06 ("Bluetooth: controller: legacy: Fix Tx
pool corruption").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix response to unexpected LL_FEATURE_RSP for the case that
BT_CTLR_SLAVE_FEAT_REQ is disabled. Fixes LL/PAC/SLA/BV-01 for such a
configuration.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Update LLCP handling during PHY update and Data Length update to not
start the LL control procedure if the remote has already indicated that
the procedure is not supported.
This fulfills the following requirement from the BT Core Specification
(Core_v5.2, Vol 6, Part B, Section 4.6):
Except where explicitly stated elsewhere in this specification, if the
peer Link Layer has indicated either during a feature exchange procedure
or by responding with an LL_UNKNOWN_RSP PDU that it does not support a
procedure, then the Link Layer shall not use that procedure.
Re-use the connection parameter request handling for PHY and
data length update procedures.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix missing first connection event due to first connection
event ticks_slot overlapping with the initiator window
ticks_slot.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add ticker_stop_abs interface, similar functionality as to
ticker_stop interface to stop a running ticker but with a
supplied absolute tick reference value.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added the functions to turn on/off the radio from LLL.
Added WAKE_IRQ to start radio after it's out of DSM.
Signed-off-by: George Stefan <george.stefan@nxp.com>
Added the functions to turn on/off the radio.
Deep Sleep Mode (DSM)
Signed-off-by: Ionut Ursescu <ionut.ursescu@nxp.com>
Signed-off-by: George Stefan <george.stefan@nxp.com>
This patch adds the selection of the necessary CONFIG_*
options for allowing the use of the 2Mbps BLE PHY on
VEGA platform.
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
The radio on the VEGA platform supports both 1Mbps, as well
as 2Mbps BLE PHYs. It does not support coded BLE PHY. This patch
adds the necessary callback, as well as timings to enable the 2 Mbps
PHY support in the SW LL HAL for VEGA.
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
In Core v5.2, Vol 6, Part B, Section 4.6.9 it is stated that it is
mandatory to support the PHY procedure if any PHY other than 1M is
supported.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
For the time being this 2M is only selectable for !nRF51 platforms.
Coded PHY is only selectable for nRF platforms supporting Coded PHY.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Make BT_CTLR_OPTIMIZE_FOR_SPEED option so that it is not
user selectable for nRF51x series SoC with encrypted
connections support.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix to return the max tx/rx time back to set default time
after using mandatory minimum PDU length and time while
switching back from Coded PHY to 1M PHY.
Also fixes#23109.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Data Length Update transmit and receive time calculation
on PHY update procedure completion.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix conditional compilation error when enabling
BT_CTLR_FAST_ENC for central only application builds.
Also added additional compilation to code exclusive to
central or peripheral role.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add Kconfig option to support building the controller
optimized for speed.
Fixes#21601.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix local initiated Data Length Update procedure from being
stalled when a remote initiates a procedure with instant.
Fixes#23069.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Tx pool from being corrupted when rough central device
uses invalid packet sequence numbers, causing NULL pointer
to be released into free data Tx pool.
Fixes#22968.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When a must-expire ticker callback is executed, it is important not to
call the LLCP state machine, as the lazy state is unavailable. The code
must rely on the next proper event to call ull_conn_llcp with an updated
non-zero lazy count.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix EBQ tests for the Max Tx Time and Max Rx Time parameter.
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Bluetooth: controller: split: fixed for endianness
Added conversion to correct endianness
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Fix local initiated Data Length Update procedure from being
stalled when a remote initiates a procedure with instant.
Fixes#23069.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ticker resolve collision implementation for incorrect
ticks accumulation and the calculation of next period.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix a race condition in radio abort requested by flash
driver. It is possible that during abort function execution,
PPI setup to start radio fires. Hence, check explicitly in
cleanup function for radio being in use and disable it.
Fixes#22945.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use the old ticker compatibility mode implementation as
default for nRF5x Series SoCs.
Fixes#22926.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix to remove assertion failure check on detecting invalid
packet sequence used by peer central and that no non-empty
packet was transmitted.
Fixes#22967.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
- avoid spourious radio interrupts by fixing ISR set,
waiting for idle, command configuration
- adjust counter to account for missing increment
- change preemption instant to avoid missing the deadline in LLL
- decrese EVENT_JITTER_US and
EVENT_TICKER_RES_MARGIN_US (same as Nordic)
Continuous scanning and connections are working fine now.
Signed-off-by: George Stefan <george.stefan@nxp.com>
Created unit tests for the encryption and decryption functions.
Tested with the peripheral and with central_hr samples.
Due to latency of CAUv3 when used as CCM inline accelerator
only one of the PDU can be encrypted/decrypted within an
bilateral exchange M->S + S->M in a connection event.
If the RXed PDU is encrypted, the TXed PDU must be empty
with More Data if there is data in the LLL queue.
The TXed PDU will be encrypted when an empty PDU is RXed.
Signed-off-by: Cristi Caciuloiu <cristian.caciuloiu@nxp.com>
Fix regression due to addition of conditional compilations
while porting the privacy feature from legacy to split
controller.
Fixes#22801.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Data transmission was paused when PHY update request control
PDU was enqueued in ULL. If there was pending data PDU in
ULL that was not enqueued towards LLL, this caused
transmission to stall.
Move the tx pause due to PHY update request/response being
enqueued to pre_tx_ack callback, this way all pending PDUs
in ULL is enqueued to LLL.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The existing stack_analyze APIs had some problems:
1. Not properly namespaced
2. Accepted the stack object as a parameter, yet the stack object
does not contain the necessary information to get the associated
buffer region, the thread object is needed for this
3. Caused a crash on certain platforms that do not allow inspection
of unused stack space for the currently running thread
4. No user mode access
5. Separately passed in thread name
We deprecate these functions and add a new API
k_thread_stack_space_get() which addresses all of these issues.
A helper API log_stack_usage() also added which resembles
STACK_ANALYZE() in functionality.
Fixes: #17852
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If CONFIG_BT_CTLR_CONN_RSSI is enabled, then lll_conn.h should
be included as well. Otherwise, struct lll_conn is unknown
at the compile unit level. This has been reproduced by
compiling the hci_uart sample, where the following error occurs:
lll_adv.c: In function 'isr_rx_pdu':
lll_adv.c:722:13: error: dereferencing pointer to incomplete
type 'struct lll_conn'
lll->conn->rssi_latest = radio_rssi_get();
^~
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
Fix uninitialized advertiser rl_idx used to check own identity
in CONNECT_IND received for directed advertisements.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This API will be deprecated in favor of the new API that clearly
specifies whether it works on logical or physical levels.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Some compilers can't resolve the conditional if/else/else construction
in ull_conn event_len_prep function, and fail with an 'uninitialized
variables' error. The change has no functional impact.
Signed-off-by: Morten Priess <mtpr@oticon.com>
BT_CTLR_SETTINGS should not depend on BT_SETTINGS as this will prevent
using settings system in the controller in a controller only build.
(BT_SETTINGS depends on BT_HCI_HOST)
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Fix infinite recursion in host-based bt_rand function. This would call
HCI LE Random Number command, which would in turn call bt_rand, causing
an infinite recursion.
bt_rand -> prng_reseed -> BT_HCI_OP_LE_RAND -> le_rand -> bt_rand
To solve this issue the controller should avoid doing calls into the
host, so all calls to bt_rand in the controller should be replaced with
a call to a controller function.
Fixes#22202
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
SW based privacy is an implementation detail in the zephyr link layers.
Therefore it should not be visible when selecting an out-of-tree
controller.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Since a peer MIC failure closes the event, it does not allow a terminate
acknowledge. For that reason a peer MIC fail for central role must force
a conn_cleanup.
Signed-off-by: Morten Priess <mtpr@oticon.com>
This fixes the EBQ tests 129 and 130. These tests check behaviour for
the DLE procedure when Encoded PHY or 2M PHY are not supported.
See also BT core spec. Version 5.1, Vol6, Part B, Section 5.1.9
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
When clearing the whitelist, possible white listings in resolve list
were left. These are now also cleared.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Clean up the nRF cmake include file to remove redundant
check for BT_LLL_VENDOR_NORDIC inside the file.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
SMI TX is different than other controller features in that it does not
necessarily imply any software changes; whether SMI TX is supported
may be simply a matter of hardware calibration. This change supports
using the same software on chips that do or do not support SMI TX
depending on calibration.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
As a part of a ticker extension interface, it is now possible to specify
a slot_window when starting a ticker. When setting the
ticks_slot_window to a non-zero value, it is requested that the node
timeout is re-located to a position within the window, where the node
does not collide with other nodes - aligning to the end of the window.
The solution takes into consideration if a node has already been
updated with drift correction (e.g. ADV randomization), subtracting this
from the window.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Updated the lll_conn_flush interface to pass the connection
handle while the LLL connection context stored handle has
been invalidated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Zephyr aims to enable supporting of multiple SW defined
BLE LL. There is a complex hierarchy of defines in the
CMake files controlling the compilation units that part of
the final library. Adding another SW LL implementation
from a different SoC provider will make the main controller
CMake file unmaintable.
As such, split the into vendor-specific CMake files for
easier additions.
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
Change adds missing Kconfig dependency.
The CONFIG_BT_CTLR_FILTER is used only for SW Link Layers.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
generated_dts_board.h is pretty redundant and confusing as a name. Call
it devicetree.h instead.
dts.h would be another option, but DTS stands for "devicetree source"
and is the source code format, so it's a bit confusing too.
The replacement was done by grepping for 'generated_dts_board' and
'GENERATED_DTS_BOARD'.
Two build diagram and input-output SVG files were updated as well, along
with misc. documentation.
hal_ti, mcuboot, and ci-tools updates are included too, in the west.yml
update.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Moving struct definitions into header file and adding API to
allow accessing data-structures from lll context
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Bluetooth sample with controller crypto, requires sys_rand32_get that
used to be linked with Tinycrypt. The selection, within Kconfig of
Tinycrypt, that has been enabling compilation of the symbol has
been removed and thus preventing controller crypto to link.
This commit moves the selection to BT_CTLR_CRYPTO.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Under race conditions it is possible that there is no call
to k_sem_give to the waiting k_sem_take in the ull_disable
function.
ull_disable function checks for reference count before
using a mayfly to schedule lll_disable, which in turn
would close requested currently active role event leading
to done event being propogated to ULL. Done event would
then call the set disabled_cb callback when the reference
count is zero, giving the semaphore to the waiting
k_sem_give in the ull_disable.
Under race conditions if the reference count reached zero
after the reference count check and before the disabled_cb
was assigned in the ull_disable function, then there are
chances that a k_sem_give is not called while ull_disable
proceeds to waiting using k_sem_take.
Fixes#21586.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix CONFIG_BT_CTLR_TX_BUFFER_SIZE value range to 251 Bytes
due to implementation limitation in use of u8_t for PDU
length fields in controller Tx buffers.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix controllers address check in cases of controller-based
privacy is supported but not used to start advertising.
This fixes regression introduced in
commit 896619ad40 ("Bluetooth: controller: Fix
controller address check").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the event_len_prep routine to increase readability without
affecting code size
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
There is an obscure bug in the case that CFG_BT_CTLR_PHY is not defined;
when a feature-exchange already has happened the lr->max_tx_time and
lr->max_rx_time are not calculated.
This bug is fixed by this commit.
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
This change prevents zephyr LL specific configurations to show up when
using an out of tree BLE controller.
BT_CTLR_ASSERT_HANDLER is used outside the controller as well,
so this is kept as is.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Fix controllers address check in cases of controller-based privacy.
When controller has been instructed by the host to use privacy
the controller should look up the peer identity address and generate
an address based on the local IRK. In the case where no match
is found or the local IRK is all zeroes the controller shall use
the fallback address. If the fallback address is not valid the
controller shall return invalid params.
This commit fixes these issues:
- Starting a private advertiser without valid random address set
but a valid local IRK exists. In this case the advertiser should
be able to advertise using the RPA regardless of a valid random
or public address.
- Starting a private advertiser with a fallback to the public
address type or an adveriser using public address does not
check if a valid public address exists. The host cannot
advertise with an all-zero public address.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix bug when connecting using whitelist and split controller.
The peer address was set to an all zeroes address.
Bug using shell:
bt init
bt wl-add <addr>
bt wl-connect on
Connected: 00:00:00:00:00:00 (public)
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Added Kconfig option to conditionally compile in HCI command
parameter validation code.
When building a combined host plus controller application,
only validations in the host at the top level close to the
API caller is sufficient.
The controller validations are included in controller only
builds.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Pass the scanner LLL context in the generated connection
complete event with unknown connecion id for HCI Create
Connection Cancel Command Response.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Directed advertising timeout released PDU Rx quota which it
should not be.
Relates to assert in #21006.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix tx_time calculation for the case that BT_CTRL_PHY is defined and
there has not been a feature exchange.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix tx_time calculation for the case that BT_CTRL_PHY is defined and
there has not been a feature exchange.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit reverts the change that moved the remote version event from
a priority event to a normal event. This is done because the strategy
for using this event has been changed and will be used with a callback
instead of a semaphore that could be locked from the RX thread.
This commit retains the infrastructure that was added in the controller
so that moving events to priority processing is still possible.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix multiple issues related to the way the host handles
Identity Information related to privacy
1. If the controller provided a public address the IRK
for this identity would be randomly generated but not
stored persistenly.
2. Fix the handling of the above issue which was fixed
for the random address but would initiate settings save
ID on every boot.
3. Fix the host not using the Vendor Specific HCI commands
related to retrieving the Identity Root (IR) from the
controller and using the key diversified function d1
to generate an IRK as specified in the BT Core spec.
Make sure that a Host generated ID is only saved when it is first
generated.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Return the IR defined in FICR as the Identity Root for the static
address through the read static addresses command instead of providing
it through the Read Key Hierarchy Root command.
This is following the recommendations in the Zephyr HCI extension
document in doc/reference/bluetooth/hci.txt
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix controllers address check in cases of controller-based privacy.
When controller has been instructed by the host to use privacy
the controller should look up the peer identity address and generate
an address based on the local IRK. In the case where no match
is found or the local IRK is all zeroes the controller shall use
the fallback address. If the fallback address is not valid the
controller shall return invalid params.
This commit fixes these issues:
- Starting a private advertiser without valid random address set
but a valid local IRK exists. In this case the advertiser should
be able to advertise using the RPA regardless of a valid random
or public address.
- Starting a private advertiser with a fallback to the public
address type or an adveriser using public address does not
check if a valid public address exists. The host cannot
advertise with an all-zero public address.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
Remove the 4us advanced radio reception, the implementation
passes all timing conformance tests without this.
This change should reduce some radio power consumption by
avoiding redundant reception duration.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Low frequency and high frequency clocks had separate devices
while they are actually handled by single peripheral with single
interrupt. The split was done probably because opaque subsys
argument in the API was used for other purposes and there was
no way to pass the information which clock should be controlled.
Implementation changes some time ago and subsys parameter was
no longer used. It now can be used to indicate which clock should
be controlled.
Change become necessary when nrf5340 is taken into account where
there are more clocks and current approach would lead to create
multiple devices - mess.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fix LENGTH_RSP and PING_RSP to be send after Encryption
Setup under the cases where LENGTH_REQ or PING_REQ cross-
over with ENC_REQ in the same connection event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Overlapping Feature Exchange requested by host with
Encryption Setup requested by the application caused the
controller to corrupt its Tx queue leading to Tx Ctrl PDU
buffers from leaking from the system.
Relates to #21299.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit targets solving issue #17731 over the Nordic LL LEGACY
arch of the BLE stack in Zephyr. This functionality is exposed
to the user as HCI Zephyr Command extensions
- BT_HCI_OP_VS_WRITE_TX_POWER_LEVEL
- BT_HCI_OP_VS_READ_TX_POWER_LEVEL
which enable Tx power read/write operations within BLE radio events
on a per role/connection basis.
The functionality is enabled upon the Kconfig advanced configuration
triggered by
- BT_CTLR_TX_PWR_DYNAMIC_CONTROL
depending on the enablement of Zephyr HCI vendor-specific command
extensions.
Signed-off-by: Andrei Stoica <stoica.razvan.andrei@gmail.com>
This commit targets solving issue #17731 over the LL_SW_SPLIT
arch of the BLE stack in Zephyr. This functionality is exposed
to the user as HCI Zephyr Command extensions
- BT_HCI_OP_VS_WRITE_TX_POWER_LEVEL
- BT_HCI_OP_VS_READ_TX_POWER_LEVEL
which enable Tx power read/write operations within BLE radio events
on a per role/connection basis.
The functionality is enabled upon the Kconfig advanced configuration
triggered by
- BT_CTLR_TX_PWR_DYNAMIC_CONTROL
depending on the enablement of Zephyr HCI vendor-specific command
extensions.
Necessary low-level radio HAL functionality and power definitions
are also supplied to address the high-level functionality of
controlling the Tx power.
Signed-off-by: Andrei Stoica <stoica.razvan.andrei@gmail.com>
Fix LENGTH_RSP and PING_RSP to be send after Encryption
Setup under the cases where LENGTH_REQ or PING_REQ cross-
over with ENC_REQ in the same connection event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Overlapping Feature Exchange requested by host with
Encryption Setup requested by the application caused the
controller to corrupt its Tx queue leading to Tx Ctrl PDU
buffers from leaking from the system.
Fixes#21299.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix leak of the node_rx buffer when processing the LL version ind as a
priority event. This leak meant being able to establish new connections
was no longer possible, because there weren't enough events to process
the all the events during connection establishment. And instead the LL
ignored the connection request sent by the peer.
Removed the inline extern declaration of a function which had a proper
header included.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix implementation for the missing reset of version
information procedure request state value.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move invalidation of connection handle when flushing TX buffers into
LLL context. Otherwise, LLL may or may not see invalidated handle
depending on mayfly scheduling.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Handle invalid ACL flags in HCI transport.
Only Point to Point is supported over HCI in both directions.
Fix flushable start HCI ACL packets not allowed on LE-U connections
from Host to controller.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
According to BT Spec v5.1 Vol 2 Part E Section 7.8.16, if the
device is already in the White List, the controller should not
add the device to the White List and should return success.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
According to BT Spec v5.1 Vol 2 Part E Section 7.8.16, if the
device is already in the White List, the controller should not
add the device to the White List and should return success.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for Zero Latency IRQs, which avoids any Zephyr
OS or application influenced ISR latencies on the
controller's ISRs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
If LL Connection Parameter Request or LL Connection Update
or LL PHY Update procedure is started by the local device
while a LL Length Update Request PDU has been sent by peer
then a Rx node has been stored in the llcp_rx place holder
for generation of Length Update procedure complete.
The failing assert check is incorrect in the above scenario
hence remove. Instead a missing append of the allocated Rx
node to the llcp_rx list has been added to the controller
implementation.
This issue relates to commit d12c53f89f ("Bluetooth:
controller: split: Fix missing data len update event").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the initiator so that connection request PDU is not abort
mid-air by preemption by the overalapping first connection
event.
If the connection establishment is in progress, then the
first connection event trying to abort the initiator will
wait the connection request to be transmited completely.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable ticker job mayfly as soon as possible when
establishing connection. This is required so as to not miss
the first connection event in slow CPU like in nRF51 series.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
There are some changes that were introduced to the Nordic SW LL,
and as such, in order to maintain compatibility, propragate them
to the OpenISA SW LL as well.
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
In nRF51 which uses CONFIG_BT_CTLR_LOW_LAT, the advertising
PDU tend to get aborted in directed advertising at event slot
durations.
Dont not use continuous directed advertising event in nRF51
where CONFIG_BT_CTLR_LOW_LAT scheduling design alternative
is used. Instead close the event after each triplet of PDU
has been tx-ed.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the directed advertising event interval calculation.
When CONFIG_BT_CTLR_LOW_LAT is used then prepare duration
has to be included in the event slot reservation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the implementation of slow encryption setup design
alternative to send ENC_RSP PDU before sending REJECT_IND
or REJECT_EXT_IND PDU.
Fixes#19917.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the regression introduced as part of
commit 57d9411837 ("bluetooth: kconfig: disable some
options for openisa/RV32M1").
Also, prior to PR that introduced this regression, the Coded
PHY support selection was incorrectly depending on PHY update
support Kconfig BT_PHY_UPDATE. This was already fixed as part
the previous PR.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit adds support for bluetooth in nRF52833 SoC.
Bluetooth radio related files created and added to Zephyr.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Use semaphore to synchronize lll_reset completion with HCI thread for
returning (command complete) only when all is done.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix connection update procedure to be cacheable if any other
local or remote control procedure is in progress.
Relates to commit 9c14567ce2 ("Bluetooth: controller: Fix
conn update to be cacheable").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Non-direct ISRs are supposed to take a void pointer as an argument,
unliike direct ones, which take no arguments. Since the radio ISR is not
declared as direct, the void pointer argument was missing, likely due to
a copy-paste mistake from the nordic LLL, which indeed uses a direct ISR
for the radio ISR.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
An issue with DT generation where instance defines are not determinstic
generating values that collide with existing IRQs.
Fixes#20558
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit provides the DPPI configuration for the Radio
driver for nRF5340 SoC, supporting LE Coded PHY.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit provides the DPPI configuration for the Radio
driver for nRF5340 SoC.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add the require #ifdef blocks in radio.c, in order to support
building for nRF53 SoC series (and, in particular, for nRF5340
CPU1 SoC).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Conditionally include nrf5340_radio.h when building the
BLE controller for nRF5340 SoC. Introduce the header for
nrf5340.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit enables support in bluetooth/controller/Kconfig
for nRF53 series of SoCs.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
nRF5340 does not support a Radio TX power of 4dBm, so we
introduce a dependency for the respective Kconfig option
for TX power, so the option is never defined for nRF5340.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Define the nRF53 HW variant in include/bluetooth/hci_vs.h
and pass the define in hci_vendor.h
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The Company ID concept is not restricted to the controller, and should
be part of the wider Bluetooth scope, so it can be used on a
controller-less device. It's used in multiple host level modules, most
notably the Bluetooth Mesh and Device Information Service.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Some Bluetooth options are currently not supported by the experimental
BLE SW LL implementation done on VEGABoard. As such, hide them from
the user altogether.
The full list of disabled config options is as follows:
- CONFIG_BT_PHY_UPDATE
- CONFIG_BT_DATA_LEN_UPDATE
- CONFIG_BT_HCI_VS
- CONFIG_BT_CTLR_LE_ENC
- CONFIG_BT_CTLR_CONN_PARAM_REQ
- CONFIG_BT_CTLR_EXT_REJ_IND
- CONFIG_BT_CTLR_SLAVE_FEAT_REQ
- CONFIG_BT_CTLR_LE_PING
- CONFIG_BT_CTLR_PRIVACY
- CONFIG_BT_CTLR_EXT_SCAN_FP
- CONFIG_BT_CTLR_CHAN_SEL_2
- CONFIG_BT_CTLR_ADV_EXT
- CONFIG_BT_CTLR_XTAL_ADVANCED
- CONFIG_BT_CTLR_SCHED_ADVANCED
- CONFIG_BT_CTLR_TIFS_HW
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
This patch updates the config files required to enable the
BLE SW defined controller to be built on RV32M1 SoCs. Only the split
version is supported.
Signed-off-by: George Stefan <george.stefan@nxp.com>
Signed-off-by: Radu Alexe <radu.alexe@nxp.com>
Signed-off-by: Ionut Ursescu <ionut.ursescu@nxp.com>
This commit takes the Nordic LLL and adapts it for RV32M1 SoCs, using
the blocks that are specific to this SoC: the GenFSK & LPTMR IP
blocks.
Signed-off-by: George Stefan <george.stefan@nxp.com>
Signed-off-by: Radu Alexe <radu.alexe@nxp.com>
Signed-off-by: Ionut Ursescu <ionut.ursescu@nxp.com>
This commit adds the HAL layer needed for the BLE controller
LL on RV32M1 SoCs on OpenISA boards. Specifically, the controller
makes use of the the GenFSK and LPTMR IP blocks.
Signed-off-by: George Stefan <george.stefan@nxp.com>
Signed-off-by: Radu Alexe <radu.alexe@nxp.com>
Signed-off-by: Ionut Ursescu <ionut.ursescu@nxp.com>
Having a pin toggle when the code reaches a certain point
is really useful for debugging; the infrastructure is already
in place for Nordic boards, so just build upon and enable the
mechanism on the Vega board as well.
Signed-off-by: David Leach <david.leach@nxp.com>
Update calls to nrfx HAL functions to reflect API changes introduced in
nrfx 2.0.0. All these functions are now called with the first parameter
pointing to the structure of registers of the relevant peripheral.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Fix Data Length Procedure to use Feature Exchange values to
send correct parameters based on whether Coded PHY is
supported by remote peer.
Relates to BT TS.5.1.1 tests:
LL/CON/MAS/BV-129-C
LL/CON/MAS/BV-130-C
LL/CON/SLA/BV-132-C
LL/CON/SLA/BV-133-C
Relates to commit fca32e41e6 ("Bluetooth: controller: Fix
DLE for remote unsupported Coded PHY").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the implementation of slow encryption setup design
alternative to send ENC_RSP PDU before sending REJECT_IND
or REJECT_EXT_IND PDU.
Fixes#19917.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix feature exchange event generation to be correctly
deferred to wait for Rx node availability for cases when
the procedure has already been performed on air.
Without this fix, remote feature request from host may not
get back a HCI event back.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Port missing implementation of the slave latency break
when there is data to be sent to peer master. Without this
initial data send from slave is delay by upto the slave
latency number of connection events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is a port of the commit 4135fb55f1 ("Bluetooth:
controller: Fix rejected enc procedure not terminated") and
commit 4d59ef306b ("Bluetooth: controller: Check if enc
procedure is in progress").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
A single connections may take up to 4 buffers at the same time. Make
number of connections that support this worst-case number
configurable.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Added implementation to cache Data Length Procedure when
another control procedure is in progress.
Relates to commit 26317491e04b ("Bluetooth: controller: Add
data length procedure queueing").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix MIC failure on re-encryption procedure when responding
at the same time to peer initiated feature request.
Relates to commit 560d6ddb964c ("Bluetooth: controller: Fix
Re-encryption procedure").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix dropped ENC_REQ PDU when retransmitting, if slave was
not listening or nack-ed it.
Relates to commit 31256568a283 ("Bluetooth: controller: Fix
ENC_REQ PDU retransmission").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix control tx queue handling to correctly pause control PDU
responses during encryption setup.
Relates to commit 4b4b650174bf ("Bluetooth: controller: Fix
control tx queue handling").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix implementation to correctly cache the control procedures
initiatable by local and peer. And, fix feature exchange and
version information procedures from being disallowed by
having then as cached requests to the controller.
Relates to #15256 and commit 0dcfa3853782 ("Bluetooth:
controller: Fix cmd disallowed and collision disconnects").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix check in start encryption to disallow new encryption
setup while there is one already in progress.
Relates to commit 120eba45f81b ("Bluetooth: controller: Fix
start encryption in progress check").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix a bug where in tx data PDU enqueued, while a ctrl PDU is
deferred due to Encryption setup being in progress, is
leaked causing HCI Tx Buffer Overflow crash.
Relates to commit 671ccc4b0ee6 ("Bluetooth: controller: Fix
data PDU leak during ctrl PDU defer").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix bug in Data Length Update procedure that caused the
connection to drop due to the implementation sending bigger
PDU before the peer has acknowledged the receipt of Length
Response PDU.
Relates to commit ffbbec7a89ca ("Bluetooth: controller: Fix
DLE during data transmission").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
We use the nRFx API nrf_get_irq_number(.) to retrieve the IRQ
line of the CCM peripheral, instead of the hard coded enum
value from MDK. We do this for portability, since these
enums may be different for different nRF SoC series.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix conditional compilation error in building the central
only samples as all peripheral structure member accesses in
the controller where not correctly compiled out.
Regression introduced in commit 6d8b12468e ("Bluetooth:
controller: split: Refactor LLL conn structure").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
We make a minor simplification in the way we define
RADIO_PDU_LEN_MAX in Nordic nRF LE radio driver; as
nRF51 SoC series is the only series where the LL PDU
max length representation is limited to a 5-bit field,
we simplify the conditional preprocessor expression,
to avoid having to list all nRF5x SoCs with PDU LEN
MAX is represented by an 8-bit integer field.
In addition, we modify the preprocessor conditional,
that compiles in the CCM support for 8-bit length field,
PDUs to be an #ifndef CONFIG_SOC_SERIES_NRF51X, instead
of #ifdef CONFIG_SOC_COMPATIBLE_NRF52X; this will
simplify the expression when adding nRF53X series
support.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add the missing initialization of master role terminate_ack
flag. This caused slave initiated remote termination as
procedure timeout.
Fixes#20135.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the LLL connection context to move out the member
fields not accessed in LLL execution context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move calculation of max_tx_octets from Nordic lll_conn.c to ULL, to
allow usage by other vendors and prevent duplicate code.
Signed-off-by: Morten Priess <mtpr@oticon.com>
With sub-microsecond resolution in ticker, it is not necessary to add a
precision margin to the conn_offset. A macro is created to allow setting
the margin to something other than the hard coded 2 * EVENT_JITTER_US.
Signed-off-by: Morten Priess <mtpr@oticon.com>
TX pdu buffers may need to be augmented for fragmentation or other
purpose, depending on vendor LLL implementation. Introduced define to
add extra bytes to TX buffer size, defaulting to 0 if unused.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Remove ifdef guard around inclusion of nrf_clock_control.h in bluetooth
controller as the defines in this header are needed anyway.
Signed-off-by: Solveig Fure <solveig.fure@nordicsemi.no>
Since the LE (Enhanced) Connection Complete that comes as part of
cancelling a connection does not come through the priority rx thread in
hci_driver.c, the event class was not being calculated and cached.
Hence, calculate and cache the class whenever an event is received as
part of invoking a command.
Fixes#20110.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
On connection callback generated by host, application
reading the RSSI value by using HCI LE Read RSSI Command
received -127 dB as the first connection event has not
occured yet in order to measure the RSSI value.
Fix this by using the RSSI value of received advertising
PDU by the initiator, and using the RSSI value of the
received CONNECT_REQ PDU by the connectable advertiser as
the initial value at connection setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
On connection callback generated by host, application
reading the RSSI value by using HCI LE Read RSSI Command
received -127 dB as the first connection event has not
occured yet in order to measure the RSSI value.
Fix this by using the RSSI value of received advertising
PDU by the initiator, and using the RSSI value of the
received CONNECT_REQ PDU by the connectable advertiser as
the initial value at connection setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix connection update procedure to be cacheable if any other
local or remote control procedure is in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
MD bit was set based on whether a memq link's next pointer
being NULL, instead the check should be that the memq has
more elements.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression in porting slave latency, slave latency
enabled was not used, cause slave latency to be applied
before first packet being acknowledged by the master.
Regression in commit 5dff214d57 ("Bluetooth: controller:
split: Fix missing slave latency impl.").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added in commit 1475402d41 ("Bluetooth: controller: Introduce ULL LLL
architecture"), then never used.
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add pre-empt timer stop when a prepare is executed so that
when the pipeline has another event queued, the firing of
the pre-empt timer does not pre-empt the just executed
prepare.
Relates to #19685.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrectly calculated ticks slots for a connection on
connection update. The reservation incorrectly included the
prepare offset.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Data Length Procedure to use Feature Exchange values to
send correct parameters based on whether Coded PHY is
supported by remote peer.
Relates to BT TS.5.1.1 tests:
LL/CON/MAS/BV-129-C
LL/CON/MAS/BV-130-C
LL/CON/SLA/BV-132-C
LL/CON/SLA/BV-133-C
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rx nodes are reserved during control procedures for
generation of HCI event on completion. Fix the allocation
and reservation in the form of a linked list per connection
context. Worst case, this list will hold one rx node for
overlapping non-instant control procedure (Data Length
Update) plus two rx node for control procedure with instant
(PHY update with Data Length Update support).
Fixes#19198.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The remote version information event needs to be processed by the
prio_recv_thread() thread in order to unblock the Host RX thread
(effectively hci_driver's recv_thread()) when it blocks waiting for a
response to a remote version information.
Add the same time gate the inclusion of the feature behind a new Kconfig
option: CONFIG_BT_REMOTE_INFO.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to be able to distinguish between connection-related events
that are generated by the controller and others genrated by LL control
procedures, introduce a new class for LLCP.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Cache the result of calling hci_get_class() to avoid repeatedly invoking
it on the same data. In order to cache it we take advantage of the fact
that both radio_pdu_node_rx_hdr and node_rx_hdr are not packed
structures and they currently have a spare padding byte (between type
and handle).
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Hide the details of obtaining a pointer to the PDU data from a node_rx
structure to simplify the code.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Call LLL reset functions when calling ll_reset to avoid carrying LLL
state across HCI resets. Respective functions already exist in LLL but
had not been called from anywhere.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Fix missing generation of data length update HCI event when
effective tx and rx timings change due to PHY update
procedure.
Fixes BT LL TS 5.1.0 test:
LL/CON/MAS/BV-52-C [Master Receiving Data, LE Coded, CI
Change]
Relates to #17097.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When ULL High and ULL Low are not at same execution priority
level, it is not necessary to disable ULL Low execution when
updating ticker using stop and start. Also, ULL Low need not
be disable inside Radio Events. This commit corrects some of
the conditional compiles.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Kconfig conditional include of Minimum Channels Used
and Channel Selection Algorithm #2.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ticker previous slot value with elapsed ticks value from
the time stopped ticker has expired. When a ticker is
stopped, if it was in its reserved time space, then the
currently occupied slot (was set to 0) should be the amount
of time that has elapsed in the expired and stopped ticker's
reserved time space and beyond until the stop.
This is required to ensure that any other new ticker does
not get scheduled over the stopped ticker's reserved time
space.
Fixes#19515.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for Zero Latency IRQs, which avoids any Zephyr
OS or application influenced ISR latencies on the
controller's ISRs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for Zero Latency IRQs, which avoids any Zephyr
OS or application influenced ISR latencies on the
controller's ISRs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When running a ticker node as "must expire", the node would invoke the
ticker callback even when programmed with latency. As "must expire" is
intended for scheduled events which are skipped due to collision, and as
such expected by LLL, purposefully skipped events should not generate
"must expire" callbacks.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix ULL implementation that uses conditional compilation by
replacing back to use of #if defined(...) in code accessing
compiled out struct members.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix for possible Tx Buffer leak during disconnection when
the buffers are in ULL context and not yet enqueued towards
LLL context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When more than one simultaneous connections are active,
transmitting data packets to peer, a termination causes
host to use the flushed pending number of completed packets
count for other active connections. This is on reception
of HCI disconnection complete event. But the controller has
not yet released any of the pending enqueued Tx buffers
which was happening after the disconnection event was
dispatched to HCI layer.
The fix here is to dispatch the disconnection complete event
from the LLL context after pending Tx buffers have been
flushed and the buffers get returned to Tx pool in the ULL
context. This way buffers are in the Tx pool before host
get to process the disconnection complete event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix for possible Tx Buffer leak during disconnection when
the buffers are in HCI thread context and not yet demux-ed
and enqueued towards LLL context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the mayfly scheduling of the Tx buffer flushing on
connection termination to be immediate (not to tailchain).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Check if the encryption procedure is in progress when receiving
rejection for the procedure.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix issue in the handling of LL_REJECT_EXT_IND packets, this would look
at the procedures that are enqueued, and not the procedure that was
being rejected. This meant that although a reject was received for the
encryption procedure, the handling for a different control procedure was
run.
This would result in the link being terminated as control procedure
timer would time out for the encryption procedure.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
When aborting radio event, there is a possibility that the
packet timer would start the radio while the packet timer
is being reset. Hence, perform a second radio state disable
with packet timers uninitialised.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing radio status and configurations reset on radio
event abort. This caused under race conditions the radio
being put into active state after being aborted.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect ticker/mayfly user id used in scheduling the
abort of a radio event. Incorrect use of thread context as
the caller caused the abort function to be scheduled from
thread context while being called from ULL high context
level in reality. This could cause corruption of mayfly
scheduling.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When flash driver requests abort of radio event in unreserved
time space, resume radio events in the pipeline were not
flushed. These resumed events caused flash driver to assert
on the check whether radio was in use.
Fixed by flushing the pipeline of all radio events, resume
and also those events in pipeline with pre-empt timeout
being setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When multiple simultaneous peripheral connections are
supported, restarting connectable advertising by host on
peripheral connection establishment failed in controller.
This prevented establishing new connections while first
connection was active.
The failure was caused by a bug in the way controller was
using quota for Rx PDU buffers. As the quota count was
release before the connection complete event rx PDU buffer
being released, the Rx PDUs needed to reserve for
connection complete event for new connectable advertising
was not available. This caused the connectable advertising
enable to fail.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use entropy driver directly in bt_rand instead of stitching together
calls to sys_rand32_get to improve efficiency. The use of
sys_rand32_get could also leak timestamps into keys.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Added support for vendor specific meta data in LLL node_rx_hdr. This
enables vendors to add "footer" data to the RX PDU, for supporting
specialized BLE features.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix calling bt_hex and bt_addr_le_str multiple times in the same logging
call could result in string overwritten since log_strdup is not
guaranteed to duplicate the string buffer in all logging configurations.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Added to allow vendor specific increase of user operation capacity for
ULL_HIGH, to support queuing additional ticker operations.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Enabled use of ticker must_expire feature for ensuring ADV timing
randomization, even when ADV doesn't get air-time. This reduces ADV
collisions. Not active for nRF51 platform for now.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Added support for vendor specific meta data in LLL conn object. This
enables vendors to add state data to connection, for supporting
specialized BLE slave features.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix regression introduced in refactoring of use of SWI.
Reduced use of SWI cannot be used in combination with
CONFIG_BT_CTLR_LOW_LAT as additional SWI is required
to split ticker WORKER and JOB contexts in order to
disable JOB but keep WORKER enabled.
Regression introduced in commit 78b461ae3e ("Bluetooth:
controller: Refactor use of SWI").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When not using ticker compatibility mode in legacy
controller, ticker job should not be disabled inside radio
events.
Ticker compatibility mode was introduced in
commit 3a9173afe1 ("bluetooth: controller: Revised ticker
for improved conflict resolution").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This file contains redundant definitions of a bunch of nRF IRQ numbers
(not all, however) that only generates confusion, as enumeration values
provided by MDK can be used instead.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Header files of nrfx HALs are not supposed to be included directly
but only with their names prepended with the hal/ directory (so that
an inclusion of an nrfx HAL header clearly differs from an inclusion
of an nrfx driver header).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The nRF52811 Radio is similar to nRF52840 and exhibits
similar Radio Timings constants. We align the LE Coded
PHY (S2) RX chain delay with that of nRF52840, which,
eventually fixes the TIFS for nRF52811. In nRF52840 we
correct the inline comment only.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We have introduced option HAS_HW_NRF_RADIO_BLE_CODED, which
reflects that an nRF SoC has a Radio with LE Coded PHY
capabilities. We now modify all #ifdef expressions for
Coded PHY in the nRF controller port, removing SOC_NRF52840
and adding this new option instead. This allows to build
an nRF controller with Coded PHY support for SOCs other
than nRF52840.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Nordic nRF52811 SoC has a 2.4GHx Radio which supports
LE Coded PHY, so we add the option to build a BLE
Controller for nRF52811 platforms with LE Coded PHY
support.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When compiling a sample like a beacon, none of the `if defined()`
statements in the switch case are actually compiled in, so the compiler
complains of an orphan mem_release();break; sequence.
Add a type that we know will always be compiled in in order to avoid
this issue.
Relates to commit 76bfea7cf9 ("Bluetooth: controller: Ensure that a
`case` statement is present").
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When both central and peripheral are supported, one each Rx
node will be needed by connectable advertising and the
initiator to generate connection complete, hence
conditionally set the count.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor to abstract the use of software interrupts in nRF5
Series.
Also, reduce the number of SWI used when interrupt priority
level configured is same for ULL High and ULL Low contexts.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit completes the refactoring of radio.c, so it
calls abstract functions for PPI handling for LE Coded
PHY (e.g. enable, disable channels, or configure endpoints),
which, then, call the platform-specific functions for PPI
handling. The abstract functions are simple wrappers,
implemented in radio_nrf5_ppi.h, conditionally, if we
build the controller with support for LE Coded PHY.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Make the definitions of LE Coded PHY-specific macros
and inline functions conditional, i.e. only if we
actually build the controller with support for LE
Coded PHY.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit refactors radio.c, so it calls abstract functions
for PPI handling (e.g. enable, disable channels, or configure
endpoints), which, then, call the platform-specific functions
for PPI handling. The abstract functions are simple wrappers,
implemented in radio_nrf5_ppi.h.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit defines generic macros for the software interrupt
(SWI) IRQ lines that are used for LLL and ULL LOW interrupts.
This is done for both the cases of the legacy and new (split)
controller architectures. In addition, it abstracts some of
the functionality around software-IRQ signals, to generic
functions, which have platform-specific implementations.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Changed documentation in Bluetooth Controller
Kconfig for BT_CTLR_ASSERT_HANDLER
Signed-off-by: Kristoffer Rist Skøien <kristoffer.skoien@nordicsemi.no>
This commit adds an explicit inclusion of toolchain.h from pdu.h.
The endianness preprocessor definitions (__BYTE_ORDER__,
__ORDER_LITTLE_ENDIAN__, __ORDER_BIG_ENDIAN__) are used by pdu.h;
these being not defined can easily go unnoticed and cause unexpected
behaviours, as detailed in PR #18922.
toolchain.h ensures that these preprocessor definitions are defined and
*must* be included in a file that uses these definitions.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Added ll_rx_link_inc_quota to allow vendor to manipulate
mem_link_rx.quota_pdu when cleaning up nodes via ull_vendor.h.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix a bug where in tx data PDU enqueued, while a ctrl PDU is
deferred due to Encryption setup being in progress, is
leaked causing HCI Tx Buffer Overflow crash.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix check in start encryption to disallow new encryption
setup while there is one already in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix MIC failure on re-encryption procedure when responding
at the same time to peer initiated feature request.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix control tx queue handling to correctly pause control PDU
responses during encryption setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to cache Data Length Procedure when
another control procedure is in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Workaround, defer peer initiated encryption while local
initiated procedure with instant is not complete. Peer
master has sent CONN_UPDATE_IND in response to
CONN_PARAM_REQ, and also has initiated a Encryption Setup
thereafter. In this case, avoid corruption of the connection
update context by deferring the Encryption Setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix implementation to correctly cache the control procedures
initiatable by local and peer. And, fix feature exchange and
version information procedures from being disallowed by
having then as cached requests to the controller.
Relates to #15256.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
nrf_timer.h and nrf_ppi.h are included by including
radio_nrf5.h, so we do not need to include them in
radio.c.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove incorrect LL_ASSERT check in Lower Link Layer that
checked for invalid connection handle on reception of PDU.
The assert is not needed as PDUs can be received until the
Upper Link Layer is aware of the acknowledgement of the
terminate ind PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix handling of Rx-ed PDU on termination, do not process
Rx-ed control PDUs and release the PDU buffer back to the
free pool.
Without this fix, Rx-ed control PDU was responded with a
Tx PDU, which did not get acknowledged or released.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix reset of Encryption Procedure state on reception of
REJECT_IND and REJECT_EXT_IND.
This is a regression in commit 79cb615770 ("Bluetooth:
controller: split: Port Enc setup to be queueable")
Relates to #18578.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the controller implementation to handle data packet
enqueue being pause on Encryption Request be done early in
the ULL when enqueueing packets towards LLL.
Fixes#18645.
Signed-off-by: Vinayak Kariappa Chettimada <vinayak.chettimada@gmail.com>
Fix reset of Encryption Procedure state on reception of
REJECT_IND and REJECT_EXT_IND.
This is a regression in commit 79cb615770 ("Bluetooth:
controller: split: Port Enc setup to be queueable")
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Post Tx pool corruption fix, clean up code and add comments
explaining the use of Tx node next field used to indicate
the Tx node's allocation from Control or Data pool.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the Tx FIFO, queue and pool corruption due to missing
release of link object to Tx link pool and hence missing
reset of the per connection initially allocated Tx link
free pointer.
The bug caused Tx PDUs and associated memory to be lost
leading to missing L2CAP segment transmissions. With lost
control PDU buffers, ULL would stall processing Done events
also leading to controller asserts.
Fixes#18546.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Due to conditional compile path ending in LL_ASSERT(0), the compiler
sees code following the assert as using uninitialized variables.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Disable Advertising Extensions by default, since they are not really
operational and they take RAM.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When compiling a sample like a beacon, none of the `if defined()`
statements in the switch case are actually compiled in, so the compiler
complains of an orphan mem_release();break; sequence.
Add a type that we know will always be compiled in in order to avoid
this issue.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix the pipeline prepare-resume implementation to correctly
handle multiple continuous events that request resume on
being pre-empted.
Symptoms of the bug being, when having continuous scanning,
and an active peripheral if a directed advertising is
started the peripheral event are not scheduled causing link
supervision timeout.
This is fixed by not having an enqueued resume event
prepared if there is an enqueued new non-resume event in the
pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Increase pipeline size to accommodate probable multiple
prepare for directed advertising events, with reserved time
which are shorter than prepare duration, being enqueued.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Increase the event start overhead time to accommodate for
processing time for dequeueing pipeline in Upper Link Layer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Reduce the maximum number of pending event done elements by
decoupling it from the maximum pipeline elements.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix assert in the RPA timeout when no resolving entry exists in the
resolving list, and the advertiser was requested to use a local IRK
to generate it's own address.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Changed ticker behavior to resolve conflicts in ticker_worker instead of
in ticker_job. This allows better real-time slot allocation, as well as
allowing callbacks even if ticker node doesn't get air-time (for audio
stream housekeeping). A priority property now also allows prioritizing
one ticker node over others.
Compatibility mode enables lagacy ticker behavior if needed.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix an issue with enhanced connection complete event raised by the
advertiser role. The advertiser reported that it has resolved the
the identity address of the peer, even when the peer is connecting
using it's identity address.
The host will not have the correct on-air address type i.e public.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Changes related to Bluetooth TSE 11068.
This is done because the current test suite does not issue
an LE Enable Address Resolution command anymore in RPA
generation tests. Makes sense now that the Bluetooth SIG has
agreed to completely decouple address resolution from
generation.
Fixes BT LL TS 5.1.0 test:
LL/SEC/ADV/BV-03-C [Privacy - Non-connectable Undirected
Advertising, Resolvable Private Address]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the pipeline prepare or resume dequeue loop from
overflow. Fixes premature exit of dequeue of done FIFO
which caused the pipeline to overflow due to previously
placed done is not dequeued correctly and next event not
being put back into the pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable use of settings system in controller and introduce settings for
company_id and subversion_number.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Make the Upper and Lower Link Layer split architecture
implementation of the controller as the default when
building Zephyr Bluetooth Low Energy controller support
in applications.
Noticeable missing feature (porting) in comparison to old
architecture implementation is, Advanced scheduling of
connection events.
The missing features will subsequently be submitted
upstream.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rename the controller Kconfig option BT_LL_SW to
BT_LL_SW_LEGACY in preparation towards switch to new Link
Layer implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Conditional compile the use of Rx Pool used to dispatch ULL
context generated messages towards LL thread context, which
is presently only used in connections.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the conditional compile of Data Length Update event
generation on PHY Update Procedure when Data Length
Extensions are not supported.
The regression was introduced in
commit 70a89876d0 ("Bluetooth: controller: Fix missing
data length update event")
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added a fix to handle L2CAP start frame with payload length
of zero which otherwise sent zero length data start PDU on
air.
Relates to #17046.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixed a bug related to missing reset of packet timing
restriction variable.
Fixes BT LL TS 5.1.0 test:
LL/CON/SLA/BV-55-C [Initiating PHY Update Procedure - Packet
Time Restrictions, LE Coded]
Related to #17097.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix bug in Data Length Update procedure that caused the
connection to drop due to the implementation sending bigger
PDU before the peer has acknowledged the receipt of Length
Response PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable the Fast Encryption design and connection RSSI
measurement when CONFIG_BT_HCI_RAW is selected.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
