This commit introduces support for multiple SOC_ROOT.
This means that additional SOC_ROOTs specified using -DSOC_ROOT as
argument to CMake will be forming a list together with ${ZEPHYR_BASE}.
This allows for greater flexibility, as developers can now specify
multiple out-of-tree SoCs and not worry about the SoC used for the
board they compile for.
Also it avoid code, such as:
if(BOARD STREQUAL my_board_using_out_of_tree_soc)
set(SOC_ROOT some/out/of/tree/soc/path)
endif()
in application CMakeLists.txt.
Finally, allowing multiple SOC_ROOTs prepares for specifying SOC_ROOTs
in Zephyr modules.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit is a cleanup of the SOC_DIR usage.
This cleanup is a preparation for supporting a list of SOC_ROOT instead
of just allowing one SOC_ROOT.
Supporting a list of SOC_ROOTs allows for placing of SOC in Zephyr
modules. It also aligns how BOARD_ROOT supports a list, and thus usage
of n_ROOT in Zephyr becomes more consistent.
This commit introduces the following changes:
- soc/xtensa/intel_apl_adsp/bootloader.cmake removed.
This file is not included elsewhere in the build system, and appears
to be leftover from #25133. Almost identical content is found in
`soc/xtensa/intel_apl_adsp/commonbootloader.cmake`
- Changed xtensa/intel_apl_adsp to named library. Using a named library
allow fetching library files based on library name without the need to
know build path (and thus removes the need for knowing `${SOC_DIR}`).
- Changed SOC_DIR/ARCH/SOC_FAMILY to use CMAKE_CURRENT_LIST_DIR for
configure time commands, as CMake code is already located inside this
path.
- Using generator expression for library files from other CMake targets.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Manage Dual core boot automatically whatever Option Bytes
configuration.
No more need of KConfig STM32H7_DUAL_CORE_BOOT to match
Option Bytes.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
This board doesn't have any known users and is not really maintained
anymore, so just remove it.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch adds the iap.h header file which provides an entry function
for the IAP (In-Application Programming) interface. Note that the IAP
commands are located in the boot ROM code. Mostly they provide access
to the on-chip flash and EEPROM devices.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
This commit adds basic support for the clock controller used in
lpc11u6x MCUs.
Signed-off-by: Maxime Bittan <maxime.bittan@seagate.com>
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
This patch adds a pinmux driver allowing to configure the IOCON (I/O
control) registers found on the LPC11U6x MCUs.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
We cannot call into the power library API as it is currently
available in binary format which cannot be included
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Add HSE,HSI,CSI,PLL as system clock options.
Also add correct configuration of the PLL.
New sysclk options:
- HSI with: CONFIG_CLOCK_STM32_SYSCLK_SRC_HSI=y
- HSE with: CONFIG_CLOCK_STM32_SYSCLK_SRC_HSE=y
- CSI with: CONFIG_CLOCK_STM32_SYSCLK_SRC_CSI=y
Existing sysclk options:
- PLL with: CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL=y
PLL clock options:
- More PLL source clocks:
Existing:
1. HSE with: CONFIG_CLOCK_STM32_PLL_SRC_HSE=y
New:
2. HSI with: CONFIG_CLOCK_STM32_PLL_SRC_HSI=y
3. CSI with: CONFIG_CLOCK_STM32_PLL_SRC_CSI=y
- PLL vco input range is auto-calculated based on PLL DIVM1
-> Example for sysclock 96MHz generated with PLL from HSI
CONFIG_CLOCK_STM32_PLL_SRC_HSI=y
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=96000000
CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL=y
CONFIG_CLOCK_STM32_PLL_M_DIVISOR=4
CONFIG_CLOCK_STM32_PLL_N_MULTIPLIER=12
CONFIG_CLOCK_STM32_PLL_P_DIVISOR=2
CONFIG_CLOCK_STM32_PLL_Q_DIVISOR=4
CONFIG_CLOCK_STM32_PLL_R_DIVISOR=2
Use LL_SetFlashLatency function from stm32h7xx_ll_utils.h
instead to setup the correct latency.
Signed-off-by: Jeremy LOCHE <lochejeremy@gmail.com>
This adds a new config option for SAM0 targets that use the BOSSA
bootloader. If the CDC ACM driver is also enabled, then the
programmer can automatically reset the board into the bootloader for
programming.
Signed-off-by: Michael Hope <mlhx@google.com>
The optional SOC_CONTEXT carries processor state registers that need to
be initialized properly to avoid uninitialized memory read as processor
state.
In particular on the RV32M1 the extra soc context stores a state for
special loop instructions, and loading non zero values will have the
core assume it is in a loop.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
Saving an extended context for RV32M1 should be optional, but it was
broken due to the offset calculation not taking the according option
into account.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
x19 is callee saved register. z_arch_el3_plat_init being a callee,
it should save it before using it. However, at this point, stack
has not been setup. So, let's just use x20 instead which is not
being used caller yet. This bug was causing VBAR_EL1 corruption,
but since [10:0] bits are reserved, bug was hidden.
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
The `TEXT_SECTION_OFFSET` symbol is used to specify the offset between
the beginning of the ROM area and the address of the first ROM section.
This commit renames `TEXT_SECTION_OFFSET` to `ROM_START_OFFSET` because
the first ROM section is not always the `.text` section.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
In case of dualcore, STM32H7, STM32W and STM32MP1,
protect concurrent register write access with HSEM.
Done for following drivers:
clock_control, counter, flash, gpio, interrupt_controller
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Various cleanups to the x86 early serial driver, mostly with the goal
of simplifying its deployment during board bringup (which is really
the only reason it exists in the first place):
+ Configure it =y by default. While there are surely constrained
environments that will want to disable it, this is a TINY driver,
and it serves a very important role for niche tasks. It should be
built always to make sure it works everywhere.
+ Decouple from devicetree as much as possible. This code HAS to work
during board bringup, often with configurations cribbed from other
machines, before proper configuration gets written. Experimentally,
devicetree errors tend to be easy to make, and without a working
console impossible to diagnose. Specify the device via integer
constants in soc.h (in the case of IOPORT access, we already had
such a symbol) so that the path from what the developer intends to
what the code executes is as short and obvious as possible.
Unfortunately I'm not allowed to remove devicetree entirely here,
but at least a developer adding a new platform will be able to
override it in an obvious way instead of banging blindly on the
other side of a DTS compiler.
+ Don't try to probe the PCI device by ID to "verify". While this
sounds like a good idea, in practice it's just an extra thing to get
wrong. If we bail on our early console because someone (yes, that's
me) got the bus/device/function right but typoed the VID/DID
numbers, we're doing no one any favors.
+ Remove the word-sized-I/O feature. This is a x86 driver for a PCI
device. No known PC hardware requires that UART register access be
done in dword units (in fact doing so would be a violation of the
PCI specifciation as I understand it). It looks to have been cut
and pasted from the ns16550 driver, remove.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
When building for nRF5340 PDK board, enable Kconfig option
for Erratum 19. Do not enable when building on nRF5340 DK.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add and mark PCIe highmem outbound memory as nGnRnE device memory
in Viper SoC MMU configuration.
Increase VA/PA bits to 36-bits to support the same.
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
ZEPHYR_SDK_INSTALL_DIR will be set as an internal CMake variable when
using the Zephyr SDK.
The Zephyr SDK zephyr/host-tools.cmake will ensure to set the CMake
ZEPHYR_SDK_INSTALL_DIR variable to the environment setting, or the
install directory in case the CMake package was used.
Users not using the environment variable will experience the following
error:
```
Linking C executable zephyr/.../bootloader/bootloader.elf
FAILED: zephyr/.../bootloader/bootloader.elf
<path>/xtensa-zephyr-elf/bin/ld: cannot find -lhal
```
This commit ensures code build correctly both when setting the
environment variable ZEPHYR_SDK_INSTALL_DIR, and when using Zephyr SDK
CMake `find_package(Zephyr-sdk)`
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This patch introduces the support of low power modes
for the STM32WBxx from STMicroelectronics based on the lptim
Here, the power modes are sleep modes have lptimer as wakeup source.
The sleep modes are configured by the SYS_POWER_MANAGEMENT.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add initial support for nuvoton numicro m48x SoC series, basic
init and uart functionality are covered with gpio and clock
directly relies on HAL.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
This enables PWM and connects it to the main LED. Tested by running
samples/basic/blinky_pwm and /fade_led.
Signed-off-by: Michael Hope <mlhx@google.com>
The SAM0 Timer/Counter for Control Applications can act as a counter
or generator. Add a binding for the TCC in PWM mode and helper to
check the compat mode.
Signed-off-by: Michael Hope <mlhx@google.com>
Add reset interrupt handlers for all three types of reset
interrupts that iProc PCIe EP can receive - namely PERST,
INB PERST and FLR.
Signed-off-by: Shivaraj Shetty <shivaraj.shetty@broadcom.com>
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
Change the SAM0 to match other boards by selecting the SAM0 specific
driver when a driver class is selected.
For example, automatically enable CONFIG_SPI_SAM0 when CONFIG_SPI is
enabled.
Signed-off-by: Michael Hope <mlhx@google.com>
Only boards with at least 64K Flash will activate MPU because:
MPU + UERSPACE + All switches implicity activated
(CONFIG_MPU_STACK_GUARD, CONFIG_ARM_STACK_PROTECTION ...)
will consume about 40K Flash
(value computed on nucleo_f767_zi on tests/arch/arm/arm_ramfunc/).
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
The PWM drivers has been refactored using the HAL LL API. Not only that,
but the set pin_set function is now faster, as channel output compare is
just initialized if needed.
NOTE: Has been tested using H743zi board for now.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Previously, DTS specification of physical RAM bounds did not
correspond to the actual bounds of system RAM as the first
megabyte was being skipped.
There were reasons for this - the first 1MB on PC-like systems
is a no-man's-land of reserved memory regions, but we need DTS
to accurately capture physical memory bounds.
Instead, we introduce a config option which can apply an offset
to the beginning of physical memory, and apply this to the "RAM"
region defined in the linker scripts.
This also fixes a problem where an extra megabyte was being
added to the size of system RAM.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Introduced interface for efficient logging from external logsystems:
Added handling of vaargs and automatic strdup to macros intended
to be used in logging interface function. Fast path to less then 4
arguments to speed up the execution. Made log_count_args external,
if external logsystem cannot count arguments.
Signed-off-by: Tomasz Konieczny <tomasz.konieczny@nordicsemi.no>
Those MCUs have 2KB RAM and 16KB FLASH memory, but they are still
powerful enough to run small configuration of Zephyr RTOS.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Added / Tested support for RNG on the STM32F767ZI nucleo board.
Updated the SoC defconfig to auto-enable the driver when
ENTROPY_GENERATOR is enabled, and updated the board README.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
- Change default CPU Clock to 240MHz
(PLL is activated)
- I2C, UART will use sysclk from clock driver
- esp32_enable_peripheral replaced by
clock_control_on
Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
- Support PLL for Higher Frequencies 80,160,240 MHz
- Support XTAL Frequencies 26MHz, 40MHz
- Clock Driver can't be disabled, because all of the other drivers
will depend on it to get their operating Frequency based on chosen
clock source (XTAL/PLL).
- Add needed references to BBPLL i2c bus ROM functions.
- Add `rtc` node to Device Tree.
- Since All Peripherals Frequency is depending on CPU_CLK Source,
`clock-source` property added to CPU node
Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
This patch introduces the support of low power modes
for the STM32L4xx from STMicroelectronics based on the lptim
Here, the power modes are sleep modes with lptimer as wakeup.
Depending on the SYS_POWER_MANAGEMENT configuration.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
tested on mimxrt1060_evt
MEMORY_NOCACHE is needed
test on frdmk64f
special test slot need configure with
CONFIG_DMA_TEST_SLOT_START
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Remove Kconfig, linker script, and related bits associated with
CUSTOM_RODATA_LD, CUSTOM_RWDATA_LD, CUSTOM_SECTIONS_LD,
SOC_NOINIT_LD, SOC_RODATA_LD, and SOC_RWDATA_LD options that have been
deprecated since Zephyr 2.2.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This option controls whether additional BLE support is
enabled for the cc13xx_cc26xx platform in hal/ti and
subsys/bluetooth.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Introduce switch to allow board configuration for VCI pins to
remain HW-controled depending on the design.
Currently pins are always configured as GPIOs which is not always
desirable.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
The NXP's Kinetics K66F is able to run with max frequency of 180MHz.
To achieve this goal the SMC's PMPROT and PMCTRL registers need to be
adjusted.
On the contrary the K64F doesn't support HSRUN run mode.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
This option enables support for High Speed RUN operation mode for
K66F. The K64F SoC doesn't support this mode.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Add the necessary clock configuration to support STM32L-based
SoCs. This change likely adds support for other STM32 SoCs as well
since the HSI48 clock is configured for all SoCs that support it
(except the STM32L4x) instead of just the STM32G4X.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
emsdp_em7d_esp is a board with secure just like em_starterkit_em7d,
but the secure feature not configed in defconfig file. we need to add
below configs in emsdp_em7d_esp_defconfig files:
CONFIG_ARC_HAS_SECURE=y
CONFIG_TRUSTED_EXECUTION_SECURE=y
when secure feature enabled, we use secure timer for system tick, so
we need to add below macro for secure timer:
#define IRQ_SEC_TIMER0 20
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
This commit fixes Cortex-M header inclusions from the deprecated paths.
The Cortex-M headers were relocated from `include/arch/arm/cortex_m` to
`include/arch/arm/aarch32/cortex_m` by the refactoring done in the
commit d048faacf2.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Now when we're finally ready to open QEMU port for ARC
we introduce the first ever platform it supports and in fact does
that quite well - Zephyr RTOS.
For now we only offer support of basic EM & HS code execution,
built-in timers, interrupt controller and set of very simple
peripherals: DW UART & optionally MMIO Virtio devices.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
This is defining the SYS_CLOCK_TICKS_PER_SEC default value
depending on the LPTIM CLOCK frequency in case of LPTIMER,
to get a TICK value as a divider of the LPTIM clock source.
It gives a better result in formulas when converting
ticks to count unit.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This adds a helper function for reading LiteX 64-bit CSRs
to be used by LiteX drivers.
Signed-off-by: Jakub Cebulski <jcebulski@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
emsdp is a FPGA based platform, can be loaded with different
configurations. Different configuration have different
interrupts:
* em5d, em7d and em11d have 111 interrupts
* em4 and em6 have 113 interrupts
* em7d_esp has 112 interrupts
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
UARTs and I2C controllers are accessed through MMIO and
these regions need to be added to MMU for proper access.
This also enable MMU for Apollo Lake by default since
serial console is now usable.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This file consists only of an array of per-CPU IOAPIC ID's that
overrides the weak symbol defined by the architecture.
The IOAPIC IDs are only used when targetting a startup IPI for the
auxiliary right now, but the IDs are the IDs and represent hardware
truth. They should be correct even if unused.
Using the wrong ones also breaks the tests/kernel/mp test, which calls
arch_start_cpu() when not in SMP mode as a deliberate unit test.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The APIC timer is not supported e.g. with SMP (which will be enabled
by default soon as well) so the sensible choice is to default to HPET.
Also, the default makes more sense to be on the SoC side, so move it
there from the board defaults.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The nodelabel references for the GPIO region MMU setup were incorrect.
The nodelabel names didn't match what is in the dts. Fix this otherwise
we get a compile error when enabling the functionality.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Several reviewers agreed that DT_HAS_NODE_STATUS_OKAY(...) was an
undesirable API for the following reasons:
- it's inconsistent with the rest of the DT_NODE_HAS_FOO names
- DT_NODE_HAS_FOO_BAR_BAZ(node) was agreed upon as a shorthand
for macros which are equivalent to
DT_NODE_HAS_FOO(node) && DT_NODE_HAS_BAR(node) &&
- DT_NODE_HAS_BAZ(node), and DT_HAS_NODE_STATUS_OKAY is an odd duck
- DT_NODE_HAS_STATUS(..., okay) was viewed as more readable anyway
- it is seen as a somewhat aesthetically challenged name
Replace all users with DT_NODE_HAS_STATUS(..., okay), which is
semantically equivalent.
This is mostly done with sed, but a few remaining cases were done by
hand, along with whitespace, docs, and comment changes. These special
cases include the Nordic SOC static assert files.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The Atmel SAM D21 SoC, according to the original Atmel datasheet
(Atmel-42181N), has 28 interrupt lines (0-27).
There have been mysterious changes in the number of interrupt lines and
on-chip peripherals in the recent Microchip datasheet releases, but
there is no explicit information available for this (e.g. PCN), so we
take the safest approach by assuming the lowest interrupt line number.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Make it possible for an application to set CONFIG_I2C=n if it wants.
The unconditional select was making this impossible due to resulting
unmet dependencies.
This is also in line with what some other SoC definitions do with I2C.
Fixes#25204
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
PSA level 1 requires secure boot. TF-M BL2 is the official
secure boot loader. It needs a BL2_HEADER_SIZE offset.
Align nonsecure address with TF-M's NS slot while TF-M BL2 enabled.
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
Add infineon XMC4 series UART support. Driver supports
only poll mode using XMCLib.
Out of 4 available UART's on SoC, only UART1 is confgired
by default in UART mode until GPIO & pinctrl support.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
Add infineon xmc series with XMC4500 support. XMC series comes with,
- CPU operates upto 120MHz
- 3 RAM (PSRAM1 - code, DSRAM1 - data and DSRAM2 - communiation)
- upto 1MB flash
init: clock control & gpio is not done, so SoC initialization directly
relies on HAL. Core operating clock is stored in no_init section, which
is kept under DSRAM1. Only DSRAM1 is used until clock support. Using
PSRAM1 and DSRAM1 needs adaptation in linker script - planned for next
revision.
Note: SystemInit cannot be consumed directly due to vector table +
HAL linker dependency.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
Add initilizations for:
- Cortex-A72 L2 Controller configurations. This initialization to
be done when cluster is in quiscent state.
- 'ICC_SRE_EL3' init to allow GIC V3 ICC_SRE_ELx system interface.
This initialization can be done at 'EL3' only.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
Swap this out and make the status a parameter.
Leave a couple of cases of DT_NODE_HAS_COMPAT().
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
These are redundantly checking a node's status twice.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Usually, we want to operate only on "available" device
nodes ("available" means "status is okay and a matching binding is
found"), but that's not true in all cases.
Sometimes we want to operate on special nodes without matching
bindings, such as those describing memory.
To handle the distinction, change various additional devicetree APIs
making it clear that they operate only on available device nodes,
adjusting gen_defines and devicetree.h implementation details
accordingly:
- emit macros for all existing nodes in gen_defines.py, regardless
of status or matching binding
- rename DT_NUM_INST to DT_NUM_INST_STATUS_OKAY
- rename DT_NODE_HAS_COMPAT to DT_NODE_HAS_COMPAT_STATUS_OKAY
- rename DT_INST_FOREACH to DT_INST_FOREACH_STATUS_OKAY
- rename DT_ANY_INST_ON_BUS to DT_ANY_INST_ON_BUS_STATUS_OKAY
- rewrite DT_HAS_NODE_STATUS_OKAY in terms of a new DT_NODE_HAS_STATUS
- resurrect DT_HAS_NODE in the form of DT_NODE_EXISTS
- remove DT_COMPAT_ON_BUS as a public API
- use the new default_prop_types edtlib parameter
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This commit adds basic support for nRF52820 SoC.
Changes affect introducing:
- architecuture files (dtsi)
- configuration of nrfx drivers
- adaptation of inclusions based on chosen SoC
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Changes:
- Added all required board files in /boards/arm/96b_aerocore2
- Modified pinmux for stm32f4
Most of the changes in this PR is based on reverse-engineering of the
PCB layout and following commits in the PX4 firmware repository for
the same board. The manufacturer does not provide and or generate
schematics and pinout tables for this board.
This PR includes almost all of the interfaces connected to the STM32
MCU, the only thing not included is the J9 and J8 headers that connect
to a 96Boards baseboard.
These headers are not vital to the functionality of the Aerocore2.
Signed-off-by: Sahaj Sarup <sahaj.sarup@linaro.org>
Add STM32F427. This is mainly aimed towards the stm32f427vi.
Changes:
- Add stm32f427 support based on previous work
done for the stm32f429.
- Rework currunt stm32f429 implimentation to now
be based on stm32f427.
- Introduce dedicated dtsi for the VI variant of both
stm32f427 and stm32f429. This is done to prevent stm32f4.dtsi
from being included twice.
Signed-off-by: Sahaj Sarup <sahaj.sarup@linaro.org>
The SAM V71 SoC configuration currently selects the `ARM_MPU` symbol
and this effectively forces MPU usage on the SoC.
This commit removes `ARM_MPU` selection from the SoC Kconfig since it
is intended to be selected by a board, and the `CPU_HAS_ARM_MPU` symbol
already indicates that the SoC supports ARM MPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The SAM E70 SoC configuration currently selects the `ARM_MPU` symbol
and this effectively forces MPU usage on the SoC.
This commit removes `ARM_MPU` selection from the SoC Kconfig since it
is intended to be selected by a board, and the `CPU_HAS_ARM_MPU` symbol
already indicates that the SoC supports ARM MPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add initial support for Broadcom Viper SoC.
It has ARM Cortex-M7 and Cortex-A72 cores.
Signed-off-by: Arjun Jyothi <arjun.jyothi@broadcom.com>
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
Use MSI as PLL source. This enables to run system clock at 110MHz.
To achieve this, voltage regulator should be set to scale 0.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This patch defines the dma feature for the stm32wbXX
and the dmamux feature for the stm32wb55x
soc series from STMicroelectronics
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add support for ADC on H7 series. Note that ADC1 and ADC2 share the same
register set, so it is added as "adc1_2".
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
All pin configuration for ATMEL SAM SoC come from devicetree so we can
now remove the soc_pinmap.h header files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert i2s_sam_ssc driver to utilize devicetree. We replace Kconfig
options for specifying the DMA configuration (channel, DMA device name)
with getting that from devicetree. We also get pincfg from devicetree,
however we still have Kconfig sybmols to specify if the RF or RK pin is
enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Due to a typo compiling the WWDG on the g4 family does not
work. This adds the correct include filename.
Signed-off-by: Richard Osterloh <richard.osterloh@gmail.com>
High Speed Flexcomm device that handles high speed SPI transfer are
mapped to the same High Frequency clock that the ARM core uses.
This allows for higher frequency SPI traffic.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Port the usage of the timeouts to the new timeout API, in order to be
able to deselect the legacy timeout option.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Convert to using DT_INST_LABEL() in the dma driver and convert dma users
to use the DMA property macros to get the dma controller name. We make
the assumption in the drivers that there is a single DMA controller
instance.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Some Kinetis SoCs have an instance of the the TPM module
that can be used for PWM control. As such, add the necessary
configurations to enable it on the SoCs that support it, as well as
enable the clock for the module to function.
In this case, the enablement is done only for the KW41Z SoCs,
but there are other SoCs that support it, f.i. KW38Z
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
Enable I2S_STM32 in the soc common part, so it will no
longer be required in board default configuration.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Rename DT_HAS_NODE to DT_HAS_NODE_STATUS_OKAY so the semantics are
clear. As going forward DT_HAS_NODE will report if a NODE exists
regardless of its status.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert DT_CODE_PARTITION_{OFFSET,SIZE} to use new
DT_REG_ADDR/DT_REG_SIZE macros instead based on
DT_CHOSEN(zephyr_code_partition).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The riscv linker scripts utilize DT_FLASH_BASE_ADDRESS and
DT_FLASH_SIZE, as we want to phase out the old generator we need to
replace these defines with macros from devicetree.h.
We support two flash configurations at this point, either a QSPI flash
like on the hifive board or a SoC flash like on the rv32m1_vega. We
update the linker scripts to check the compat of the zephyr,flash node
and based on if its 'jedec,spi-nor' or 'soc-nv-flash' we determine how
to extract the "flash" base address and size.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
As we phase out per instance Kconfig symbols convert to utilize
DT_NODELABEL for SPI and I2C instances instead.
Also updated comments to change from FLEXCOMM8 to HSLSPI.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove DT_ADC_{0..2}_NAME from dts_fixup.h, if this casues the
dts_fixup.h file to be empty we remove the file as well.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Reworked sam_gmac driver to get pin ctrl/mux configuration information
from the device tree instead of via Kconfig and defines in soc_pinmap.h
We remove defines from soc_pinmap.h that are no longer needed due to
getting all that information from devicetree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds the `devicetree.h` header inclusion in the Atmel SAM-
family SoC header files, as required by the ARM SoC conventions.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the `devicetree.h` header inclusion in the Atmel SAM0-
family SoC header files, as required by the ARM SoC conventions.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Enable the driver for the Kinetis Digital-to-Analog (DAC) modules
present in the NXP Kinetis K6x SoC series.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Enable the driver for the Kinetis Digital-to-Analog (DAC32) module
present in the NXP Kinetis KE1xF SoC series.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Remove dts_fixup.h files that are needed anymore, remove defines that
are used, and replace defines with new DT macros.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move defines for _RAM_ADDR, _RAM_SIZE, _ROM_ADDR, and _ROM_ADDR into
the linker.ld and thus remove dts_fixup.h. We rework to use
DT_REG_ADDR and DT_REG_SIZE on DT_CHOSEN(zephyr_sram) and
DT_CHOSEN(zephyr_flash).
Also fixup use of _RAM_ADDR/_RAM_SIZE in newlib/libc-hooks.c.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove dts_fixup.h files that are not used (empty) or the defines aren't
used anymore and thus can be removed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert linker scripts and arc_mpu_regions.c setup to use new
devicetree.h macros to extract the base address and size of the various
memory regions (DDR, SRAM, FLASH, DCCM, ICCM). We also remove the
scaling up and down since DT_REG_SIZE() returns the value in bytes.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rework x86 linker scripts to use DT_REG_ADDR/DT_REG_SIZE on
DT_CHOSEN(zephyr_sram) and DT_CHOSEN(zephyr_flash). As part of this
we remove the dts_fixup.h. Using DT_REG_SIZE means we don't have to
adjust the sizes by 1024.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove dts_fixup.h files that are needed anymore, remove defines that
are used, and replace defines with new DT macros.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace DT_SNPS_ARCEM_0_CLOCK_FREQUENCY with a PATH based reference
to cpu@0 (DT_PATH(cpus, cpu_0)) and than getting the clock_frequency
property:
DT_SNPS_ARCEM_0_CLOCK_FREQUENCY ->
DT_PROP(DT_PATH(cpus, cpu_0), clock_frequency)
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert from DT_MMIO_SRAM_10000000_BASE_ADDRESS to
DT_REG_ADDR(DT_NODELABEL(ddr0)) and similar for
DT_MMIO_SRAM_10000000_SIZE to DT_REG_SIZE().
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Complete STM32 conversion to new DT macros by removing
remaining occurences of DT_ST_STM32_ADC_FOO_LABEL.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When we converted the GPIO driver to the new GPIO API we didn't update
the MMU mapping defines. Use the macros from devicetree.h and
nodelabel's to get the register base address and sizes for the GPIO
blocks.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Complete STM32 conversion to new DT macros by removing
remaining occurences of DT_ST_STM32_ADC_FOO_LABEL.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
During devicetree macro changes, LPSRAM_BOOT_VECTOR_ADDR
pointed to another macro which was renamed to a non-existent
one. Fix it so that SMP builds again.
Fixes#24720
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Rework the atom/linker.ld to match how ia32/linker.ld works with regards
to how PHYS_LOAD_ADDR & PHYS_RAM_ADDR are set based on CONFIG_XIP and
from which DT_PHYS_{RAM,LOAD}_ADDR defines. We update the minnowboard
dts and atom.dtsi files to keep in sync with this.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert ocram and sdram regions to use new macro DT_REG_ADDR() and
DT_REG_SIZE() with DT_NODELABEL to determine the various memories size
and base address.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use new DT_INST macros throughout. Removed per
instance Kconfig symbols and replaced with DT_NODELABEL references
where needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert the code for setting the clock IP source of the various IPs
present in the NXP KE1xF SoC series to the new DT API.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Convert driver to use the new device tree macro's instead of
dts_fixup.h based macros. This moves us closer to removing both
dts_fixup.h and per instance Kconfig symbols.
The pinmux_mchp_xec is also being updated since it's using DT
from GPIO.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Convert driver to use the new device tree macro's instead of
dts_fixup.h based macros. This moves us closer to removing both
dts_fixup.h and per instance Kconfig symbols.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Convert driver to use instance macro's instead of dts_fixup.h based
macros. This moves us closer to removing both dts_fixup.h and per
instance Kconfig symbols.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Replace DT_ARM_CORTEX_*_0_CLOCK_FREQUENCY with a PATH based reference
to cpu@0 (DT_PATH(cpus, cpu_0)) and than getting the clock_frequency
property:
DT_ARM_CORTEX_*_CLOCK_FREQUENCY ->
DT_PROP(DT_PATH(cpus, cpu_0), clock_frequency)
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit renames the Kconfig `FLOAT` symbol to `FPU`, since this
symbol only indicates that the hardware Floating Point Unit (FPU) is
used and does not imply and/or indicate the general availability of
toolchain-level floating point support (i.e. this symbol is not
selected when building for an FPU-less platform that supports floating
point operations through the toolchain-provided software floating point
library).
Moreover, given that the symbol that indicates the availability of FPU
is named `CPU_HAS_FPU`, it only makes sense to use "FPU" in the name of
the symbol that enables the FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Use DT_INST_FOREACH macro to combine code used for multiple instances.
Remove unnecessary Kconfig options and dts fixups for GPIO instances.
A side-effect to using DT_INST_FOREACH is that GPIO ports A0 and A3
are now enabled, whereas they were originally disabled by default as
an optimization.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Rename DT_L2_SRAM_* to just L2_SRAM_* and set it using new DT macros.
Do something similar for DT_LP_SRAM_* renamed to LP_SRAM_*
Updated the intel_gna driver as it used the DT_L2_SRAM_* defines.
This change also lets us remove dts_fixup.h on intel_s1000 and
intel_apl_adsp SoCs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Reworked spi_sam driver to utilize new DT_INST macros as part of
this rework we also now get pin ctrl/mux configuration information
from the device tree instead of via Kconfig and defines in soc_pinmap.h
We remove defines from dts_fixup.h and soc_pinmap.h and associated
Kconfig symbols that are no longer needed due to getting all that
information from devicetree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Added ATMEL_SAM_DT_NUM_PINS macro which will return the number of pins
to initialize for "pinctrl-0" devicetree property.
Added ATMEL_SAM_DT_PINS macro which will create an array initializer
with all the pins associated with "pinctrl-0" devicetree property.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add wdt0 node labels for all watchdogs. Keep the existing wdt node
labels in place for backwards compatibility.
Add a wdt1 node to the nRF5340 application core .dtsi, but leave it
disabled. Leave the wdt node's label set to "WDT" on this core for
backwards compatibility also, in case any users are getting it with a
string literal instead of asking the devicetree. This can be changed
later after this round of watchdog changes has been shaken out and
tested more.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Convert the driver to use the new dt macros. As part of this change we
remove a bunch of defines that happened in dts_fixup.h that didn't
belong there. Some of these should be converted to devicetree
properties at some point.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The SAM E54 series SoCs include a single-precision FPU; therefore, the
`CPU_HAS_FPU` symbol should be selected.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The SAM E53 series SoCs include a single-precision FPU; therefore, the
`CPU_HAS_FPU` symbol should be selected.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The SAM E51 series SoCs include a single-precision FPU; therefore, the
`CPU_HAS_FPU` symbol should be selected.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The SAM D51 series SoCs include a single-precision FPU; therefore, the
`CPU_HAS_FPU` symbol should be selected.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The SAM D51, E51 and E53 SoC series Kconfig files were missing the
`ARM` architecture symbol selection.
This symbol must be selected at the SoC level; otherwise, build will
fail because the symbol is not selected by anything and other ARM-
specific configurations depend on it.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Replace DT_CPU_CLOCK_FREQUENCY with a PATH based reference to cpu@0
(DT_PATH(cpus, cpu_0)) and than getting the clock_frequency property:
DT_CPU_CLOCK_FREQUENCY -> DT_PROP(DT_PATH(cpus, cpu_0), clock_frequency)
This lets us remove DT_CPU_CLOCK_FREQUENCY from dts_fixup.h.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Change DT_GPIO_GECKO_SWO_LOCATION to use new DT_INST and DT_PROP macros
and remove defining it in dts_fixup.h.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move the FPGA GPIO init to use the devicetree.h macros instead of
dts_fixup.h. This allows us to remove dts_fixup.h on mps2 based
platforms.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert old DT defines of the form DT_ARM_SCC_BASE_ADDRESS to
DT_REG_ADDR(DT_INST(0, arm_scc)). This allows us to remove dts_fixup.h
on musca boards.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use instance macro's instead of dts_fixup.h based
macros. This moves us closer to removing both dts_fixup.h and per
instance Kconfig symbols.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Reworked adc_sam_afec driver to utilize new DT_INST macros as part of
this rework we also now get pin ctrl/mux configuration information
from the device tree instead of via Kconfig and defines in soc_pinmap.h
We remove defines from dts_fixup.h and soc_pinmap.h and associated
Kconfig symbols that are no longer needed due to getting all that
information from devicetree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use new DT_INST macros throughout. We also remove
defines in dts_fixup.h as they are no longer needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use new DT_INST macros throughout. We update one
sample app to use a nodelabel reference. We also remove defines in
dts_fixup.h as they are no longer needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a common header for SAM0 drivers to use to extract data from
devicetree. The initial set of macros are for get the MCLK A*MASK
register address for clock enablement and a set of macros for use with
DMA to get the channel and trigger source or 0xff if there is no dmas
property.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace DT_CPU_CLOCK_FREQUENCY with a PATH based reference to cpu@0
(DT_PATH(cpus, cpu_0)) and than getting the clock_frequency property:
DT_CPU_CLOCK_FREQUENCY -> DT_PROP(DT_PATH(cpus, cpu_0), clock_frequency)
This lets us remove DT_CPU_CLOCK_FREQUENCY from dts_fixup.h
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In order for IO pins to work correctly after waking up from shutdown
mode, we need to unlatch them given they were automatically latched
when Power_shutdown() was invoked.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
The DT_I2S_* defines can be removed as the driver is now utilizing the
new dt macros that don't require these defines.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use new DT_INST macros throughout. This allows us to
also remove dts_fixup.h that are no longer used.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace macros of the form DT_CAVS_ICTL_x_IRQ with new dt form macro
DT_IRQN(DT_INST(x, intel_cavs_intc))
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace various drivers and soc code that use DT_CAVS_ICTL_BASE_ADDR
with DT_REG_ADDR(DT_NODELABEL(cavs0)).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Reworked i2c_sam_twi driver to utilize new DT_INST macros as part of
this rework we also now get pin ctrl/mux configuration information
from the device tree instead of via Kconfig and defines in soc_pinmap.h
We remove defines from dts_fixup.h and soc_pinmap.h and associated
Kconfig symbols that are no longer needed due to getting all that
information from devicetree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Reworked i2c_sam_twi driver to utilize new DT_INST macros as part of
this rework we also now get pin ctrl/mux configuration information
from the device tree instead of via Kconfig and defines in soc_pinmap.h
We remove defines from dts_fixup.h and soc_pinmap.h and associated
Kconfig symbols that are no longer needed due to getting all that
information from devicetree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use new DT_INST macros throughout. Removed per
instance Kconfig symbols and replaced with DT_NODELABEL references
where needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use new DT_INST macros throughout. We can remove
various defines from dts_fixup.h now as well.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use new DT_INST macros throughout. We remove the
aliases and use nodelabel instead in the soc_gpio.h to determine the
label for the specific gpio controller.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use new DT_INST macros throughout. This allows us to
also remove dts_fixup.h that are no longer used.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert from using dts_fixup.h based macros to DT_INST macro. This lets
us remove the dependancy on dts_fixup.h for this driver.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use DT_INST macros and remove related board per
instance Kconfig symbol usage. We also remove dts_fixup.h defines that
are no longer needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert from using dts_fixup.h based macros to DT_INST macro. This
lets us remove the dependancy on dts_fixup.h for this driver.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Reworked usart_sam driver to utilize new DT_INST macros as part of
this rework we also now get pin ctrl/mux configuration information
from the device tree instead of via Kconfig and defines in soc_pinmap.h
We remove defines from dts_fixup.h and soc_pinmap.h and associated
Kconfig symbols that are no longer needed due to getting all that
information from devicetree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Reworked uart_sam driver to utilize new DT_INST macros as part of this
rework we also now get pin ctrl/mux configuration information from the
device tree instead of via Kconfig and defines in soc_pinmap.h
We remove defines from dts_fixup.h and soc_pinmap.h and associated
Kconfig symbols that are no longer needed due to getting all that
information from devicetree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a set of macros that will create a struct soc_gpio_pin
initialization based on data extracted from device tree. This should
allow replacing the static data in soc_pinmap.h with data coming from
devicetree instead.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert from using dts_fixup.h based macros to DT_INST macro. This lets
us remove the dependancy on dts_fixup.h for this driver.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We don't need to define DT_NUM_IRQ_PRIO_BITS or DT_NUM_MPU_REGIONS in
dts_fixup.h files anymore, so we can remove them.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To remove the need to have DT_NUM_IRQ_PRIO_BITS defined in every
dts_fixup.h we can just handle the few variant cases in irq.h. This
allows us to remove DT_NUM_MPU_REGIONS from all the dts_fixup.h files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds the MCLK clock configuration symbol fix-up for the
GMAC peripheral.
The APB-agnostic clock configuration fix-up symbols map to the
SoC-specific APB, in order to accommodate different SoC variants with
the GMAC on different APBs.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Make use of DT_NODELABEL macros to get device instances
information to configure drivers I2C instances.
This allows to remove I2C related lines in fixup.h files
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Use compatible information to configure i2c stm32.
With this, driver version selection is done thanks to compatible
and it is not needed anymore to do this via Kconfig symbol
selection under soc/
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Replace CONFIG_ENTROPY_NAME with DT_CHOSEN_ZEPHYR_ENTROPY_LABEL. We now
set zephyr,entropy in the chosen node of the device tree to the entropy
device.
This allows us to remove CONFIG_ENTROPY_NAME from dts_fixup.h. Also
remove any other stale ENTROPY related defines in dts_fixup.h files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a helper macro that will go from a DT_DRV_INST number and return the
clock_ip_name value for that instance.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
As prep for drivers being converted to utilize DT_INST and removal of
per instance Kconfig symbols, move soc.c code to utilize DT_NODELABEL
instead.
Also rename various node labels to match the SoC docs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
z_power_soc_deep_sleep() is called with interrupt locked already
so restoring BASEPRI is pointless here, as it would only allow
exceptions afterwards. The situation is complicated by the fact
that kernel/idle.c:idle() only locks interrupt without unlocking
which means the BASEBRI at entry of z_power_soc_deep_sleep() is
already set to allow exceptions only but not lower priority
interrupts like timer. So when, e.g. timer, interrupt fires,
the SoC would come out of deep sleep but the waking interrupts
are never delivered since they are masked, and idle() will try
to sleep again. And now it gets into a loop of going into deep
sleep briefly and waking up immediately and it goes on and on.
The solution is not to restore BASEPRI and simply leave it at
zero. This is a workaround as a proper fix would involve
invasion changes to the PM subsystem.
Also, _sys_pm_power_state_exit_post_ops() is not being called
when deep sleep is involved, so PRIMASK needs to be reset
after coming out of deep sleep.
Fixes#23274
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This moves enabling XTENSA_HAL to the SoC definitions.
As Xtensa SoCs are highly configurable, it is possible
that the generic Xtensa HAL provided in the tree is
not suitable. So only enable XTENSA_HAL only if
the generic version can be used.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Use the new devicetree API in a file which cross-checks dt reg base
addresses with values from the vendor HAL.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
When enabled, instead of erasing entire flash page at once, page will
be erased in defined time slices. Erasing single page stalls CPU
for significant time share (~80ms) and partial erase divides the
operation in to the shorter time periods, resuming CPU operation in
meantime and enabling better scheduling of time sensitive operations.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
To ease driver configuration, enable ENTROPY_STM32_RNG
only if device node matching driver compatible is enabled.
No more need to enable config symbol under soc/
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Convert stm32 entropy driver to configuration based on device tree.
Select HAS_DTS_ENTROPY symbols and configure CONFIG_ENTROPY_NAME
in fixup files.
Since rng node is not enabled (or available) on all boards, it could
happen that symbol ENTROPY_STM32_RNG is not enabled and hence
ENTROPY_HAS_DRIVER not selected which ends up with a symbol
ENTROPY_NAME defined throufg Kconfig selection. Thus, in fixup file,
CONFIG_ENTROPY_NAME is defined only if not already defined.
Additionally, update boards that used to configure entropy by default.
On these boards, enable rng device in device tree and remove Kconfig
related configuration (which should not be part of default
configuration).
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Instead of using Kconfig options for setting the device name and IRQ
priority for the entropy_nrf5 driver, get these settings from the rng
node defined in DTS for a given SoC.
Provide also fixups for CONFIG_ENTROPY_NAME, until applications using
entropy drivers are converted to use DTS as well.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Convert driver to use DT_INST macros and remove related board per
instance Kconfig symbol usage.
Also update counter_basic_api test to use DT_INST and remove the
udoo_neo_full_m4.conf as its not longer needed since the per instance
Kconfig sybmols don't exist anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use DT_INST macros and remove related board per
instance Kconfig symbol usage.
Additionally remove udoo_neo_full_m4.conf from gpio_basic_api test since
the Kconfig symbols don't need to be set anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
As prep for drivers being converted to utilize DT_INST and removal of
per instance Kconfig symbols, move soc.c code to utilize DT_NODELABEL
instead.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Make I2C and SPI drivers for nRF SoCs no longer dependent on Kconfig
options that enable instances (i.e. I2C_x and SPI_x). Now these drivers
enable hardware instances when corresponding nodes in devicetree are
enabled (have status "okay").
For I2C, SPI, and UART drivers, instead of using Kconfig dependencies
to prevent enabling of hardware instances that cannot be used together
(e.g. SPIM1 and TWIM1), a file that signals invalid configurations with
build assertions is added to compilation.
Also dependencies on HAS_HW_NRF_* options are removed from Kconfigs
of I2C, SPI, and UART drivers, as for hidden options that activate
proper type of driver such dependencies are not actually helpful.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Convert driver to utilize the new DT_INST macros completely and remove
associated Kconfig symbols that now come from devicetree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move to using DT_NODELABEL to get references to determine if specific
GPIO ports are enabled in the beetle SoC code.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Recent stm32 gpio driver changed removed the per port Kconfig symbols.
We had a type in flight issue in which the stm32l422xx got added and set
GPIO_STM32_PORTH. Just remove the Kconfig symbol as its not needed
anymore to fix build issues.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Use device node declaration instead.
Clean up GPIO_STM32_PORT* Kconfig symbols.
On some boards some gpio ports where disabled using Kconfig symbols.
Disable them now via device tree nodes in boards dts files.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add support for the STM32L422Xb SoC. Base stm32l422.dtsi on
stm32l412.dtsi to be able to add the crypto device later.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add a YAML, DTS node and driver support to utilize data from devicetree
for register address and driver name.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a k_timeout_t type, and use it everywhere that kernel API
functions were accepting a millisecond timeout argument. Instead of
forcing milliseconds everywhere (which are often not integrally
representable as system ticks), do the conversion to ticks at the
point where the timeout is created. This avoids an extra unit
conversion in some application code, and allows us to express the
timeout in units other than milliseconds to achieve greater precision.
The existing K_MSEC() et. al. macros now return initializers for a
k_timeout_t.
The K_NO_WAIT and K_FOREVER constants have now become k_timeout_t
values, which means they cannot be operated on as integers.
Applications which have their own APIs that need to inspect these
vs. user-provided timeouts can now use a K_TIMEOUT_EQ() predicate to
test for equality.
Timer drivers, which receive an integer tick count in ther
z_clock_set_timeout() functions, now use the integer-valued
K_TICKS_FOREVER constant instead of K_FOREVER.
For the initial release, to preserve source compatibility, a
CONFIG_LEGACY_TIMEOUT_API kconfig is provided. When true, the
k_timeout_t will remain a compatible 32 bit value that will work with
any legacy Zephyr application.
Some subsystems present timeout (or timeout-like) values to their own
users as APIs that would re-use the kernel's own constants and
conventions. These will require some minor design work to adapt to
the new scheme (in most cases just using k_timeout_t directly in their
own API), and they have not been changed in this patch, instead
selecting CONFIG_LEGACY_TIMEOUT_API via kconfig. These subsystems
include: CAN Bus, the Microbit display driver, I2S, LoRa modem
drivers, the UART Async API, Video hardware drivers, the console
subsystem, and the network buffer abstraction.
k_sleep() now takes a k_timeout_t argument, with a k_msleep() variant
provided that works identically to the original API.
Most of the changes here are just type/configuration management and
documentation, but there are logic changes in mempool, where a loop
that used a timeout numerically has been reworked using a new
z_timeout_end_calc() predicate. Also in queue.c, a (when POLL was
enabled) a similar loop was needlessly used to try to retry the
k_poll() call after a spurious failure. But k_poll() does not fail
spuriously, so the loop was removed.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Kernel timeouts have always been a 32 bit integer despite the
existence of generation macros, and existing code has been
inconsistent about using them. Upcoming commits are going to make the
timeout arguments opaque, so fix things up to be rigorously correct.
Changes include:
+ Adding a K_TIMEOUT_EQ() macro for code that needs to compare timeout
values for equality (e.g. with K_FOREVER or K_NO_WAIT).
+ Adding a k_msleep() synonym for k_sleep() which can continue to take
integral arguments as k_sleep() moves away to timeout arguments.
+ Pervasively using the K_MSEC(), K_SECONDS(), et. al. macros to
generate timeout arguments.
+ Removing the usage of K_NO_WAIT as the final argument to
K_THREAD_DEFINE(). This is just a count of milliseconds and we need
to use a zero.
This patch include no logic changes and should not affect generated
code at all.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Fix typo where DT_REG_ADDR was used istead of DT_REG_SIZE in
linker script for i.MX RT socs and their ITCM and DTCM memories.
Signed-off-by: Arvid Rosén <arvid@softube.com>
This adds utility functions to irq.h in accordance with zephyr's
multi-level irq numbering schema. Functions that are added will
get the zephyr IRQs level and provide function to return the
interrupt number at a particular level.
Fixes issue #20338
Signed-off-by: Jaron Kelleher <jkelleher@fb.com>
Added properties to support the core interrupt controller on the NIOS2
cpu cores and enable that support for the NS16550 UART.
We rename some compatibles so that the cpu core compatibles is unique.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Indicate that the NXP Kinetis KE1xF SoC contains a Low Power Timer
(LPTMR) and default to enabling the corresponding driver if
CONFIG_COUNTER is enabled.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Added device tree nodes and associated headers for
defined uarts on the stm32g0 and stm32g07x 8x parts.
Tested with uart on stm32g071rb disco board with usart3 going to stlink.
Using shell.
Signed-off-by: Kieran Levin <ktl@frame.work>
This commit renames the `cortex_r` directory under the AArch32 to
`cortex_a_r`, in preparation for the AArch32 Cortex-A support.
The rationale for this renaming is that the Cortex-A and Cortex-R share
the same base design and the difference between them, other than the
MPU vs. MMU, is minimal.
Since most of the architecture port code and configurations will be
shared between the Cortex-A and Cortex-R architectures, it is
advantageous to have them together in the same directory.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This adds multi-processing support for Intel Apollo Lake ADSP.
Some of the start-up code is borrowed from ESP32.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The GCC 9.2 toolchain for intel_apl_adsp has builtin atomic
functions already so we can use that instead of the custom
one in arch. This allows the atomic function calls to be
inlined.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
EXCSAVE2 is used for level 2 exception save location.
Since we are using level 2 interrupts, use EXCSAVE7
instead as level 7 interrupts are not being used
by the SoC.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The DSP wall clock timer is a timer driven directly by
external oscillator and is external to the CPU core(s).
It provides a common and synchronized counter for all
CPU cores (which is useful for SMP), instead of
indepedently running local core timer (xtensa_timer).
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When power management is enabled, SYS_PM_STATE_LOCK is necessary
in order to prevent the power policy from automatically entering
certain sleep states.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
The shared irq support isn't needed in this driver. We just need to
deal with the fact that some SoCs have only a single interrupt line and
some have three interrupts. We can just ifdef that based on
DT_NUM_IRQS.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This was a simple missing macro, that prevented flash_shell to build
for stm32f4 based boards (which is weird, CI should have caught that
much earlier)
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Convert the driver to use DT_INST_ defines, update all dependent dts,
soc and board files.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Rename the clock defines from k64 to K6X. This allows
inclusion of K66 series MCU's support without much
re-defines. Clock divider defaults to K64 series.
Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Add entropy driver based on GECKO TRNG module along with device
tree support for EFM32PG and EFR32MG SOCs.
Signed-off-by: Pooja Karanjekar <pooja.karanjekar@lemonbeat.com>
This reverts commit 8739517107.
Pull Request #23437 was merged by mistake with an invalid manifest.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
This commit updates the `xilinx_zynqmp` SoC initialisation code to use
the CMSIS-Core(R) features.
In addition, it also defines the Core IP revision value for the SoC as
specified in the Zynq UltraScale+ Device Technical Reference Manual.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Towards cleaning up (and hopefully removing dts_fixup.h in the near
future). We need to move the handling of different names for the irq
flag propety into the driver and out of dts_fixup.h.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Towards cleaning up (and hopefully removing dts_fixup.h in the near
future). We need to move the handling of different names for the irq
flag propety into the driver and out of dts_fixup.h.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert usb_stm32 driver to use of DT_INST macros.
Since driver is compatible with 3 different dt compatibles and
compatible string is included in DT_INST macros, I've kept the
DT_USB_ compatible agnostic macros based on DT_INST ones, which
allowed to remove fixup definitions.
Use of DT_USB symbols is now limited to usb_dc_stm32.
Additionally, compatible "st,stm32-otgfs" is removed from list
of compatibles for usbotg_hs ips.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Convert driver to use DT_INST_ defines.
In the process, we've removed all UART/USART/LPUART code in
device instanciation code which had no impact.
Since all uart/usart/lpuart nodes declare compatibility with
st,stm32uart, DT_INST_X_ST_STM32_UART_FOO could be used.
Removed DT_UART fixup macros.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Convert driver to use DT_INST_ defines.
Removed DT_FLASH_DEV fixup macros, except DT_FLASH_DEV_NAME
used in applications.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Convert driver to use DT_INST_ defines.
Removed DT_RTC_0 fixup macros but keep DT_RTC_NAME_0 as it is
still in use across RTC users.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Erratum 19: SPU region size is 32 kB instead of 16 kB.
The config should be used for alignment for data that must follow SPU
region boundaries, and to enable runtime checks when configuring SPU
regions.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
The set of interrupt stacks is now expressed as an array. We
also define the idle threads and their associated stacks this
way. This allows for iteration in cases where we have multiple
CPUs.
There is now a centralized declaration in kernel_internal.h.
On uniprocessor systems, z_interrupt_stacks has one element
and can be used in the same way as _interrupt_stack.
The IRQ stack for CPU 0 is now set in init.c instead of in
arch code.
The extern definition of the main thread stack is now removed,
this doesn't need to be in a header.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Enable counter driver support for H7 series. Tested with H743ZI MCU
using samples/drivers/counter/alarm.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Change to code to use the automatically generated DT_INST_*
defines and remove the now unneeded configs and fixups.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
The sole purpose of init options has been to enable hardware flow
control on NS16750 when asked. Use the proper DTS tags for this.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
This commit updates the `qemu_cortex_a53` platform to use the
refactored AArch64 interrupt system.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the `xilinx_zynqmp` platform to use the refactored
AArch32 interrupt system.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add support for sleep states. Sleep state 1 corresponds to idle mode,
and Sleep state 2 corresponds to standby mode, as per the Technical
Reference Manual.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
This commit adds an option to configure the frequency
in Hz for the HFRCO clock source. The default value
for this option is 0 which skips the configuration of the HFRCO.
This feature is supported for efm32gg, efm32jg, efm32pg, efm32fg
and efm32mg SOCs currently.
Signed-off-by: Pooja Karanjekar <pooja.karanjekar@lemonbeat.com>
Ring buffer in memory backend does not depends on xtensa adsp board,
so make it general: remove to log_backend_rb and remove dependency on
up_squared_adsp.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The 48MHz PLL on MEC1501 is shut off during deep sleep (i.e. heavy
sleep in datasheet). When coming out of deep sleep, this PLL needs
about 3ms to lock. Most peripherals are using this PLL as clock
source and timing would be off before PLL is locked. Example of
this is seen on serial console where garbage characters are sent
as the UART block is not pushing characters out at the configured
baud rate. This likely affects all other peripherals such as I2C
and eSPI. Luckily, there is a register to indicate whether the PLL
is ready. So spin on it when coming out of deep sleep.
Fixes#23207
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Convert driver to use DT_INST_ defines. The preferred defines for
drivers are DT_INST_. The driver mostly used DT_INST_ defines but
a few IRQ priority defines needed conversion.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use DT_INST_ defines. The preferred defines for
drivers are DT_INST_.
As part of this change we utilize the device tree for GIRQ info and
rename timer3 to 2 since we are doing this by instance number.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The max-value should just be an int and not an array. Change the type
to 'int' in the binding and fixup the driver to match.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The ILITEK ILI9340 should have been in the dts and added as #defines in
dts_fixup.h. Fix this by adding a display node in the dts.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use DT_INST_ defines. Replace dts_fixup.h use
for DT_RTC_0_NAME with DT_INST_0_NXP_KINETIS_RTC_LABEL to be
consistent. Also, remove the aliases that had been used for this
driver in various nxp_k*.dtsi.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use DT_INST_ defines and remove Kconfig per instance
enablement in favor of DT_INST_ define existing. Also, remove the
aliases that had been used for this driver in nxp_rt.dtsi.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update the hal_nordic module revision, to apply the following changes:
nrfx_config: Fix translation of symbols for _S or _NS only peripherals
For peripherals with only one type of access available (either secure
or non-secure), the common symbol translation scheme cannot be used
as it leads to mapping to non-existing symbols (e.g. NRF_FICR_NS).
Instead, use fixed translations for these symbols (e.g. NRF_FICR to
NRF_FICR_S, only for secure images).
nrfx_config: Add missing _S/_NS symbol translations for nRF5340/nRF9160
Add translations of names with _S and _NS suffixes for peripheral
access symbols that are available for a given chip but were not used
so far in any nrfx HAL or driver, to make the lists of translations
complete and consistent.
This commit corrects also the translation of NRF_I2S symbol for nRF5340
whose name for this SoC contains also the index 0 (so it needs to be
handled similarly like NRF_PDM0 is).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Configure the LDO supply when initializing H7 (M7) SoC. I have
observed MCU hanging on LL_PWR_IsActiveFlag_VOS() wait loop when
doing a cold boot if LDO supply is not explicitely enabled.
According to the datasheet LDO should be enabled by default,
however HAL examples also configure LDO, so there may be a
reason to perform such step.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The driver for STM32's independent watchdog already exists and is
compatible with the stm32g0 SoC. Enable the independent watchdog
for the stm32g0 series for use with this driver.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
It is observed that after each test, weird characters appear on
console. This problem goes away if deep sleep is disabled.
The theory is that the CPU runs to deep sleep (_sys_suspend())
faster than UART can shift all the bits out. If we spin wait
for UART FIFO to clear, this is no longer an issue. This is
circumstantial evidence to the theory. So for now, put in
a workaround to spin wait for UART FIFO to clear before
going into deep sleep.
Relates to #22885
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit adds Device-Tree instances of the Flash controller
to the SAM3X, SAM4E and SAM4S series. The Flash-Controller
is used to get the unique device identifier.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Include stm32XXxx_ll_utils.h in soc.h for every stm32 SoC,
if CONFIG_HWINFO_STM32 is selected.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Add qemu-cortex-a53 memory regions with proper attributes
to translation tables. Minimal regions to execute "hello_world"
are added as of now, More granular memory regions should be
added later as per the requirement.
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
Same deal as in commit eddd98f811 ("kconfig: Replace some single-symbol
'if's with 'depends on'"), for the remaining cases outside defconfig
files. See that commit for an explanation.
Will do the defconfigs separately in case there are any complaints
there.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Same deal as in commit eddd98f ("kconfig: Replace some single-symbol
'if's with 'depends on'"), for all symbols defined within defconfig
files. See that commit for an explanation.
Maybe 'if's were used originally to mirror the 'if's in the main Kconfig
files, and then it got copied around by people assuming 'if' must work
differently from 'depends on'. It doesn't match in every spot at least.
Better to keep it simple and just consistently use 'depends on' when
it's a single symbol/choice I think. Helps reinforce that 'if' isn't
magic too.
Verified by printing all Kconfig menu nodes (symbols, choices, menus,
etc.) before and after the change and diffing (should show no
difference).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Move PWR init code out of clock control driver and
put SMPS related function under SMPS condition as it
is not supported by all soc variants of the series.
Fixes#22363
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The DT_FLASH_DEV_NAME define used by the sample was set to a define
symbol that was never generated. Change it to use
DT_INST_0_ATMEL_SAM0_NVMCTRL_LABEL on the sam0 family of SoCs that
had this issue.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
All board defconfig files currently set the architecture in addition to
the board and the SoC, by setting e.g. CONFIG_ARM=y. This spams up
defconfig files.
CONFIG_<arch> symbols currently being set in configuration files also
means that they are configurable (can be changed in menuconfig and in
configuration files), even though changing the architecture won't work,
since other things get set from -DBOARD=<board>. Many boards also allow
changing the architecture symbols independently from the SoC symbols,
which doesn't make sense.
Get rid of all assignments to CONFIG_<arch> symbols and clean up the
relationships between symbols and the configuration interface, like
this:
1. Remove the choice with the CONFIG_<arch> symbols in arch/Kconfig and
turn the CONFIG_<arch> symbols into invisible
(promptless/nonconfigurable) symbols instead.
Getting rid of the choice allows the symbols to be 'select'ed (choice
symbols don't support 'select').
2. Select the right CONFIG_<arch> symbol from the SOC_SERIES_* symbols.
This makes sense since you know the architecture if you know the SoC.
Put the select on the SOC_* symbol instead for boards that don't have
a SOC_SERIES_*.
3. Remove all assignments to CONFIG_<arch> symbols. The assignments
would generate errors now, since the symbols are promptless.
The change was done by grepping for assignments to CONFIG_<arch>
symbols, finding the SOC_SERIES_* (or SOC_*) symbol being set in the
same defconfig file, and putting a 'select' on it instead.
See
https://github.com/ulfalizer/zephyr/commits/hide-arch-syms-unsquashed
for a split-up version of this commit, which will make it easier to see
how stuff was done. This needs to go in as one commit though.
This change is safer than it might seem re. outstanding PRs, because any
assignment to CONFIG_<arch> symbols generates an error now, making
outdated stuff easy to catch.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use standard log settings. Since default LOG_IMMEDIATE has changed to
output one character we have one character ring buffer slots which
limit amount of logs stored.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fix the following device tree warnings:
unit-address and first reg (0x20000) don't match for iccm@0
unit-address and first reg (0x80010000) don't match for dccm@80000000
Since the em_starterkit_em7d_normal has a different base address for
iccm & dccm, and most of the em_starterkit variants have different sizes
for iccm & dccm. Just define the nodes in the specific
em_starterkit*.dts file and remove them from emsk.dtsi. This removes
the issue reported in the warning.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix the following device tree warnings:
unit-address and first reg (0x40000) don't match for iccm@0
unit-address and first reg (0x80040000) don't match for dccm@80000000
Re-work iccm and dccm reg address and size to be based on #defines.
This allows the nsim_sem_normal.dts to override defaults that are set in
nsim.dtsi. Utilize DT_ADDR macro to take a 'unit-address' still value
and convert it into a hex value (just prepending 0x).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Create an SoC definition for the Audio DSP on Intel Apollolake
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add the common config structure as a prefix of the driver-specific
config structure and use the devicetree GPIO pin counts to initialize
it. Not all aliases appear to be present, but using instances breaks
because the ports used by different boards do not always start with
the first.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This breaks down the GPIO controller definition in DTS into
multiple entries. This allows these controllers to be
referenced by other DTS, and test board overlay files.
And also we can remove the entries in the dts fixup file.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commits adds GPIO driver for LiteX SoC builder.
Due to the fact that GPIO in LiteX is unidirectional and can be
configured with different pins amount per port, additional entries
were added to the dts file.
Signed-off-by: Robert Winkler <rwinkler@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
The current sam spi driver uses soc dependent name which duplicate
configuration to enable other platforms. This refactor current
definitions to a generic way to reuse symbols by multi soc definitions.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Add option for keeping the watchdog timer of the NXP Kinetis KE1xF SoC
series enabled at boot with a configurable, initial timeout.
This removes the risk of failure from when z_arm_watchdog_init()
disables the watchdog timer until the application code configures a
timeout and re-enables the watchdog timer.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The xcc specific reentrant syscall implementations are actually useful
for xtensa in general. So move that code from being specific to
intel_s1000 / xcc into generic newlib/libc-hooks.c. This is in prep
for the Zephyr SDK dropping -DMISSING_SYSCALL_NAMES which will make
its version of newlib on xtensa match behavior with xcc.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds the following:
- device tree bindings for Gecko watchdog driver
- EFM32PG SOC support for the watchdog driver
- EFM32PG board support for the watchdog driver
- DTS aliases for testing with default watchdog driver test
Signed-off-by: Oane Kingma <o.kingma@interay.com>
Enable the shared IRQ for the UART line and enable the remaining tasks
that depends on a separated declaration of the TX/RX/Err/... IRQs.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Lot of misdefined variables that went in undetected due to lack of CI on
this board. Fix them and test build with new SDK.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds the remaining gpio ports I, J and K to the device
tree and dts_fixup headers of the EFM32JG12B and EFM32PG12B SoCs.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
The Silicon Labs EFM32 Jade Gecko MCU includes:
* Cortex-M3 core at 40MHz
* up to 1024KB of flash and 256KB of RAM
* multiple low power peripherals
This is basically the same as the EFM32 Pearl Gecko, but with an ARM
Cortex-M3 core instead of a Cortex-M4F.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Disable the early watchdog initialization for the NXP Kinetis series
if the application is to be chain-loaded by mcuboot.
The early watchdog initialization must only take place once and needs
to happen within a SoC specific number of CPU clock cycles after
reset.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Move CONFIG_WDOG_INIT for the NXP Kinetis series to the top-level
Kinetis Kconfig file and enable it where needed.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Move the NXP Kinetis KW4xZ watchdog initialization code to
z_arm_watchdog_init() and make it optional based on CONFIG_WDOG_INIT.
This brings the KW4xZ in line with the other NXP Kinetis series SoC
implementations.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Move the NXP Kinetis KL2x watchdog initialization code to
z_arm_watchdog_init() and make it optional based on
CONFIG_WDOG_INIT.
This brings the KL2x in line with the other NXP Kinetis series SoC
implementations.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The driver for STM32's independent watchdog already exists and is
compatible with the stm32l1 SoC. Enable the independent watchdog
for the stm32l1 series for use with this driver.
Signed-off-by: Kwon Tae-young <tykwon@m2i.co.kr>
Instead of having TI_CCFG_PRESENT as a symbol that's only defined in
soc/arm/ti_simplelink/cc13x2_cc26x2/Kconfig.defconfig.series and y when
SOC_SERIES_CC13X2_CC26X2 is enabled, turn it into a helper symbol that's
selected by SOC_SERIES_CC13X2_CC26X2.
This avoids having a symbol that's only defined in a Kconfig.defconfig
file, which is confusing. It also makes things a bit more generic, in
case other boards with CCFGs are added.
Also rename it to HAS_TI_CCFG to be consistent with other helper
symbols, and add a help text.
Flagged by scripts/kconfig/lint.py.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Added delay before starting low frequency clock for the first time to
ensure that anomaly conditions are not met. Delay is configurable and
might be disabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This reverts commit 49bd19f3f2,
as the patch it contains is no longer needed after nrfx is updated
to version 2.1.0.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Update the hal_nordic module revision, to switch to nrfx 2.1.0.
Because the list of peripherals for nRF5340 has changed as follows:
- SPIM2 has been renamed to SPIM4
- SPIM2-3, SPIS2-3, TWIM2-3, TWIS2-3, and UARTE2-3 have been added
a couple of related corrections needed to be applied in dts and Kconfig
files, plus the spi_nrfx_spim driver has been extended with the support
for SPIM4.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
DesignWare driver can manage different amount of irqs so let's make it
configurable via DTS.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Remove soc/arm/st_stm32/stm32YY/flash_registers.h files.
Change register accesses in stm32 flash drivers to use FLASH_TypeDef
from modules/hal/stm32/stm32cube/stm32YYxx/soc/stm32xxxxxx.h.
Fixes#16235
Signed-off-by: Sarvesh Patkar <psarvesh314@gmail.com>
when DMA IP is enabled on stm32 series,
the heap size must be configured to large value
because of dma channels configuration.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Same deal as in commit 677f1e6 ("config: Turn pointless/confusing
'menuconfig's into 'config's"), for a newly-introduced stuff.
Also clean up headers to be consistent with recent cleanups.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In zephyr_linker_sources().
This is done since the point of the location is to place things at given
offsets. This can only be done consistenly if the linker code is placed
into the _first_ section.
All uses of TEXT_START are replaced with ROM_START.
ROM_START is only supported in some arches, as some arches have several
custom sections before text. These don't currently have ROM_START or
TEXT_START available, but that could be added with a bit of refactoring
in their linker script.
No SORT_KEYs are changed.
This also fixes an error introduced when TEXT_START was added, where
TEXT_SECTION_OFFSET was applied to riscv's common linker.ld instead of
to openisa_rv32m1's specific linker.ld.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
CPU_CORTEX_M_HAS_DWT depends on
!CPU_CORTEX_M0 && !CPU_CORTEX_M0PLUS
, but SOC_SERIES_PSOC62 unconditionally selects it, even for
SOC_PSOC6_M0. This forces CPU_CORTEX_M_HAS_DWT on on Cortex-M0.
Fix it by moving the selects for CPU capabilities to the more specific
SOC_PSOC6_{M0,M4} symbols. This seems more readable than adding a
condition to the 'select CPU_CORTEX_M_HAS_DWT'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
nrf52811_pca10056 board should enable nRF 802.15.4 radio driver
automatically when 802.15.4 subsystem is enabled, as other Nordic
802.15.4-compliant boards do.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Enable the RTC counter present in the NXP K6x SoC if CONFIG_COUNTER is
enabled. Add the needed dts fixup for the RTC device.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
CPU_CORTEX_M_HAS_SYSTICK and CPU_CORTEX_M_HAS_VTOR do not need
to be explicitely selected in SoC/Boards definitions of
platforms implementing the Cortex-M mainline architecture; they
are already selected by ARMV7_M_ARM8_M_MAINLINE Kconfig symbol.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
