Set integration_platforms on these samples to just mps2_an385.
This should be sufficient to make sure these tests build and run.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Set integration_platforms on these samples to just native_posix. This
should be sufficient to make sure these tests build and run.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Set integration_platforms on these samples to just mps2_an385.
This should be sufficient to make sure these tests build and run.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Set integration_platforms on these samples to a single platform, we
prefer native_posix, than a qemu platform mps2_an385 and finally a
hardware platform.
For the 'basic' sample we use native_posix, for the 'rtt' we use
frdm_k64f ad we need a hardware platform that supports 'rtt', and for
the 'usermode' we utilize 'mps2_an385' as we can run in QEMU.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Set integration_platforms on these samples to just mps2_an385.
This should be sufficient to make sure these tests build and run.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Set integration_platforms on these samples to just native_posix. This
should be sufficient to make sure these tests build and run.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
All dma drivers are devicetree based now so we can remove the last
bits of Kconfig associated with the old driver style.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace device_get_binding with DEVICE_DT_GET for getting access
to the io-channels/adc controller device.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Set integration_platforms on these samples to just frdm_k64f.
This should be sufficient to make sure these tests build.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
I only see one sample with an overlay using the now legacy sda-pin and
scl-pin properties. Move it to the new style.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Modify an example by adding command that is using shell_getopt funtion.
Extent sample.yaml with getopt configuration.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Convert ism330dhcx INT_PIN attribute from Kconfigs to Device
Tree binding properties. Here int-pin has been defined as
enum with two possible values: 1 and 2.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add an example callback implementation that prints out the new maximum
payload given the updated datarate.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The default shell configuration has heavy flash and memory requirements,
requiring project maintainers to set many configuration options to "n"
to keep flash and memory requirements within reason.
This adds a new configuration option, CONFIG_SHELL_MINIMAL, which will
disable flash and memory heavy options by default, and allow project
maintainers to select/imply only the options they want.
On a quick test from an ARM board I'm working on, enabling this option
cut flash space requirements by ~8 KB, and memory requirements by ~1 KB.
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Set integration_platforms on these samples to just native_posix.
This should be sufficient to make sure these tests build and run.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Set integration_platforms on these samples to just native_posix. This
should be sufficient to make sure these tests build and run.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add an application that uses Direction Finding API for
transmission of CTE in connectionless mode (periodic adverising PDUs).
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
We need to set a proper IPv4 netmask to each VLAN interface
so that IPv4 source address selection will work properly.
If we do not do this, then the network interface could be
selected incorrectly for the VLAN interfaces which could then
mean that the packet might get dropped by the target device.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adjust the documentation and devicetree overlays so the sample can be
built for any board with an Arduino I2C and SPI pinout, defaulting I2C
and SPI to y to make it easier to switch between the two without
requiring a pristine build.
The user has to choose an appropriate overlay or have a sensor built
in to the board.
Use the newly introduced DEVICE_DT_GET_ANY() in main.c to ask for a
bosch,bme280 without worrying over the details or exposing
DT_DRV_COMPAT-based functionality that is really meant for drivers.
Remove the no-longer-needed board specific overlay for nRF52840 DK;
this is covered by the generic Arduino overlays now.
Fix the datasheet link while we're here.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Now that we have consolidated tf-m signing, the combined
binary is always named tfm_merged, so we need to modify
the QEMU targets in the tfm-integration samples.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Place the new signing code in the TFM module CMakeLists.txt.
Make some small tweaks and add a sentence to the docs.
In the process, make a few changes to the signing code:
- Change some names of files created.
- Minimize the number of files created.
- Use hex files instead of bin files. This is so we don't need to know
the offset when creating hex files from bin files.
Also add signing for MCUBOOT_IMAGE_NUMBER=1 based on the code from the
v2m_musca_b1 board, though, this board does not build with =1 now
because of (I assume) some flash aliasing which places the S and NS
images 0x10000000 apart, where the manual algorithm places them next to
each other. It builds with =2, though.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Set integration_platforms on these samples to just native_posix. This
should be sufficient to make sure these tests build and run.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A different configuration is applied when running this test
using west or using twister.
Both will use the disco_l475_iot1 overlay, but the extra config
for clock bus tunning is applied only when using twister and
samples is failed when run with west.
Move this extra config from sample.yaml to board .conf file so
it is applied in both cases.
Fixes#32376
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
There was some code to demonstrate the cpu_mask API here, but it was
asymmetric (only thread B was pinned) and assumed exactly two CPUs.
Start both threads pinned to CPUs 0 and 1 from an external main, and
predicate the pinning on there actually being more than one SMP CPU.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add an object to retain data across both reboots and entry to
SYSTEM_OFF. This only works on nRF52, since nRF51 and nRF53 require
different low-level operations to configure RAM retention.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add a sample application to test MAX6675 cold-junction-compensated
K-thermocouple to digital converter.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Switch to use DEVICE_DT_GET instead of device_get_binding for pinmux
device. As part of this change drop the "label" property from
the pinmux devicetree node and update the binding and dts files to
reflect that.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Enable PECI and KSCAN drivers to evaluate any side-effect
in LPM entry/exit and power consumption.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Remove support for the Musca-A board. This board is rarely used, few
are available and superceded by Musca-B and Musca-S.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update sample espi driver test to exercise some SAF functionality
based on the limited hardware available. Note the SAF test will
erase a section of the flash. SAF tests are enabled for the EVB only.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Introduce a dts board overlay on the nucleo_l053r8 board as this
board was used for testing addition of resolution setting on the
mcp9808 sensor driver.
Signed-off-by: Steven Daglish <s.c.daglish@gmail.com>
This commit adds the nRF IEEE 802.15.4 Service Layer Fault Handler
to the 802154_rpmsg sample.
Signed-off-by: Czeslaw Makarski <Czeslaw.Makarski@nordicsemi.no>
Simplify pm subsystem removing PM_STATE_LOCK option. Constraints API is
small and is a key component of power subsystem.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Fixes problem where UART DFU mage uploads via mcumgr get interrupted
by the mcuboot_util logs, causing uploads stuck and fail on time-out.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The sample was failing twister test with a timeout because there was
no pass/fail criteria for it (nothing was tested). The fix adds
harness on consolse and some output that can be verified.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
The sample was failing twister test with a timeout because there was
no pass/fail criteria for it (nothing was tested). The fix adds
harness on consolse and some output that can be verified.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
The sample was failing twister test with a timeout because there was
no pass/fail criteria for it (nothing was tested). The fix adds
harness on consolse and some output that can be verified.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Nordic watchdog does support a callback, but it has a time limit that
is too tight for the way this sample uses it. Add infrastructure to
bypass using the callback in this sample.
Also add more diagnostics explaining the status of callback use in the
sample.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The commit adds initialization of fs_dir_t variables in preparation
for fs_opendir function change that will require fs_dir_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The commit adds initializations of fs_dir_t variables in preparation
for fs_opendir function change that will require fs_dir_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
We cannot automatically flash both master and remote images
to nRF5340 application and network core, this needs to be
done separately. We therefore, cannot execute the test on
nRF5340, so we switch to make the test build-only on this
platform. We also make nrf5340_cpuapp an integration
platform for the given sample.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Start using DTS values for PCI Vendor ID and PCI BDF. For the PCI
Device ID we do not use DTS since this would require changing overlay
for different SKU board.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove missing printout, and add the last line of printout.
Note that it's not possible to run this on hardware using Twister as of
now, since west flash will not flash tfm_s.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Exlude native_posix platform from USB samples but
add build-only test case.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
socket_can_generic.h makes some assumptions that are not always valid
for various drivers with regards to numbering. To clean this up we
add defines for SOCKET_CAN_NAME_0 and SOCKET_CAN_NAME_2 in addition to
SOCKET_CAN_NAME_1.
We also move struct socket_can_context into the drivers themselves
since they know best how many CAN interfaces are getting supported and
what naming/number convention they'd have.
Additionally, this also exposes a few other build issues with the
can_mcux_flexcan driver that get fixed.
Finally, we remove the platform_allow from samples/net/sockets/can
since it is no longer needed.
Fixes#31733
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch replaces magic numbers with COAP_TOKEN_MAX_LEN value and
removes unnecessary castings of token buffer type.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
RFC 7252 (CoAP) specifies value of the Version (Ver) field in the
protocol header to value 1. This patch defines value of the Version
field to make packet initialization easier. All samples and tests
are updated to use the new COAP_VERSION_1 field when initializing
a CoAP packet.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Fix stack overflow in the TX power control sample.
Current stack usage with 0.11.1 zephyr toolchain was at 100% stack
usage of the DYN TX stack.
Fixes: #31433
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Similarly to what was done for watchdog test,
update watchdog sample to be compatible with stm32 window watchdog
and enable testing by twister.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
APL ADSP doesn't boot with reset-vector.S in the bootloader,
move it over to the main application binary.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Add some changes to adc sample to enable valid verdict generation
using twister:
-Replace 'single_line' keyword with correct 'one_line'
-Remove parenthesis from the sample output to enable regex verdict
-Add timeout to save time in execution
Additionally, add support for disco_l475_iot1.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Remove the deprecated scan filter duplicate enum values and parameter.
This was deprecated for the 2.3.0 release.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The commit adds initializations of fs_file_t variables in preparation
for fs_open function change that will require fs_file_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
In the last step of the example, the system should go into soft off
state in order to match the original intent in the example to go
into the hardware's SHUTDOWN mode.
Fixes#31727
Signed-off-by: Vincent Wan <vanti.coder@gmail.com>
SPARC systems take a huge penalty in stack usage due to register window
saves. A recent patch reverted SPARC-specific increases to various
stack sizes, causing this test to fail.
Other platforms are excluded because of stack limits, so do that here
too.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Mcumgr-cli application doesn't accept log on the communication
channel. Since #30370 was merged log messages are generated from
MCUBOOT_UTIL by default. That made `mcumgr image upload` failing.
Patch disables logging via shell which cure the issue.
It is not necessary if another application on the host intercepts
log messages (like picocom can).
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
After the latest upmerge, OpenThread requires explicit configuration
of the Master Key. This commit adds a Kconfig symbol that can be
used to setup its value. By default no Master Key is configured and
OpenThread generates a random one.
The Sockets Echo samples are configured with a fixed key with this
commit.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
If CONFIG_LOG_BACKEND_NET_AUTOSTART is disabled, then the syslog
network backend is not started automatically. This option is
enabled by default but it might be that application needs to
start the backend manually if the network is slow to start or
some special routes needs to be set by the application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch introduces COAP_TOKEN_MAX_LEN definition in coap.h file.
This definition replaces magic number across CoAP protocol
implementation and CoAP samples.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Clean up logging menuconfig by grouping configuration into
sections like: mode, processing configuration, backends.
Additionlly, removed LOG_ENABLE_FANCY_OUTPUT_FORMATTING which is no
longer in use.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Mass-erase the flash prior to running the sample to ensure the storage
partition can be initialized correctly.
Fixes: #30477
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This sample shows how to use the ADC API. Depending on the support of
sequential reads in the driver, 1 or 2 channels are read and printed.
A devicetree overlay is necessary to specify the used ADC channel(s).
Signed-off-by: Martin Jäger <martin@libre.solar>
The flash shell can now build when there isn't a chosen
zephyr,flash-controller available, so we can simplify the filter to
apply this sample to more boards.
Two STM32 H7 board configurations are excluded because the flash driver
isn't supported yet on the M4 core.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Change subsystem to use struct pm_state with substate-id instead of
using only the power state category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Migrate the whole pm subsystem to use new power states information
from power_state.h and get states and residency properties from
device tree.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add EDAC shell application demonstrating EDAC API usage. Can be used
for verification of the functionality with error injection mechanism.
Sample is also included in the twister tests.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Provide a demonstration of using the timeutil skew infrastructure to
measure the relative error of the two clock sources on Nordic boards.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Remove UP Squared support for the gpio sample that was merged after
the sample itself was removed.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Due to the routing, the ip_k66f board can only use RTT to export
console. With this change the SHELL is enabled to get access
to network commands (like ping).
To use it with RTT from Segger:
-------------------------------
On HOST (terminal 1):
./JLink_V664/JLinkRTTLogger -Device MK66FN2M0XXX18 -RTTChannel 1 \
-if SWD -Speed 4000 ~/rtt.log
On HOST (terminal 2):
nc localhost 19021
(19021 is the port number for the Segger RTT server)
Signed-off-by: Lukasz Majewski <lukma@denx.de>
The 'local-mac-address' nodes are helpful for assessing if the LLDP like
example of DSA switch works correctly.
As those are used only for testing (or when user explicitly needs them),
those are added as DTS overlay to DSA example.
The 'local-mac-address' properties will be visible when one assess the
LLDP response from ip_k66f board (each LAN port has different IP
assigned).
Example output from 'tcpdump -v -i eth0':
-----------------------------------------
Chassis ID TLV (1), length 7
Subtype MAC address (4): 00:00:12:13:00:37 (oui Unknown)
Port ID TLV (2), length 7
Subtype MAC address (3): 00:00:12:13:00:37 (oui Unknown)
Time to Live TLV (3), length 2: TTL 120s
System Name TLV (5), length 13: ip_k66f LAN:3
End TLV (0), length 0
Signed-off-by: Lukasz Majewski <lukma@denx.de>
This patch brings simple example on per DSA port LLDP filtering based on
MAC address of received packet.
Each lan1, lan2 and lan3 ports handle separately LLDP packets going into
them.
Nonetheless, the K66F ENET handles correctly all other packets types -
to be more specific - ICMP, TCP/IP.
Setup -> ON HOST:
Configure/start the lldpd daemon (debian 10) on host to use
MAC 01:80:c2:00:00:03:
(lldpd -ddd & ) && sleep 2 && \
lldpcli configure lldp agent-type nearest-non-tpmr-bridge
Signed-off-by: Lukasz Majewski <lukma@denx.de>
CoAP protocol defines registry of Content-Format option values.
This patch adds this enumeration to coap header file to make it
available to all applications using CoAP protocol. It modifies
code using CoAP service to use new enumeration.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
This patch modifies Bluetooth HCI RPMsg drivers and samples to use
RPMsg Service instead of configuring OpenAMP directly in the driver
or the sample.
Co-authored-by: Piotr Szkotak <piotr.szkotak@nordicsemi.no>
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
'main' function should retun 'int' and not 'void'. Otherwise
some picky compilers (like ARC MWDT) would warn about that.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Introduce retransmission counter to the coap_pending structure. This
allows to simplify the retransmission logic and allows to keep track of
the number of remaining retranmissions.
Additionally, extend the `coap_pending_init()` function with `retries`
parameter, which allows to set the retransmission count individually for
each confirmable transaction.
Fixes#28117
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
DW16 provides information on mechanisms to enter and exit 4-Byte
address modes, returning the device to reset state, and how to
manipulate the values in the first status register.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
DW15 provides information on entry and exit from QSPI modes. In
particular, it specifies whether and how the status register must be
updated for this feature.
Add a JESD216 devicetree property for the Quad Enable Requirements
value.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Modify led_pwm sample in order to make it usable in device testing:
- Remove parenthesis from the logs as they prevent use of regex
- Add a harness_config multiline regex in order to enable verdict
generation
- Update README
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Currently the following shields will thus be supported
waveshare_epaper_gdeh0154a07
waveshare_epaper_gdeh0213b1
waveshare_epaper_gdeh0213b72
waveshare_epaper_gdeh029a1
Signed-off-by: Kim Bøndergaard <kim@fam-boendergaard.dk>
Signed-off-by: Kim Bøndergaard <kibo@prevas.dk>
The IIS2DLPC drdy interrupt can be routed to either INT1 or
INT2 pin. Currently the selection is done by Kconfig configuration.
This commit is instead moving it into Device Tree as 'drdy-int'.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Since the additional objects are only added for compilation, enable
them in sample.yaml instead, so that they get built by the CI. Remove
them from the actual sample, as they obfuscate the sample purpose and
the objects visible from the server perspective.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
BLE and LwM2M grew in terms of RAM usage so that the sample does not
fit into nRF52832 anymore in the default configuration. This cause
twister to report an error when overflows errors are enabled.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The IPSP example code is explicitly registering the all local-link nodes
address (ff02::1). This is currently already registered by the normal
IPv6 stack at interface initialization, so doing it in the application
is redundant.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
This sample is trying to register four multicast addesses:
uart:~$ net iface
...
IPv6 multicast addresses (max 8):
ff02::1
ff02::1:ff01:c41e
ff02::1:ff00:1
ff02::1
Increasing CONFIG_NET_IF_MCAST_IPV6_ADDR_COUNT to 4 to make neighbor
discovery work correctly.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Currently Zephyr links reset-vector.S twice in xtensa builds:
into the bootloader and the main image. It is run at the end
of the boot loader execution and immediately after that again
in the beginning of the main code. This patch adds a
configuration option to select whether to link the file to the
bootloader or to the application. The default is to the
application, as needed e.g. for QEMU, SOF links it to the
bootloader like in native builds.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Conditionally use either DPPI or PPI channel in the sample so that
it can be built for all nRF SoCs. Update documentation accordingly.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Convert the driver so that it creates its instance basing on DT.
Remove no longer needed Kconfig option CRYPTO_NRF_ECB_NAME.
Also update accordingly the crypto sample.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Mark the CANopen sample with program download support as build-only
since it depends on MCUboot being flashed to the board prior to the
generated application firmware image.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Tigerlake H has less RAM and fewer cores. Both should be
supported, selectable at the board level. For now use the H
configuration as more readily available for testing.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
1. SOF doesn't have to be built in .bin format
2. don't include soc.c and soc_mp.c twice in cmake
3. remove an unused mailbox.h header
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
CAN_MCP2515_MAX_FILTER is not needed anymore and was probably just a
misunderstanding. Aligned it with the other CAN drivers.
This also was the last difference in the mcp2515 specific config for the
can sample, so that can be deleted as well.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
