This commit is about the it8xxx2 i2c master driver which
includes six SMBus channels. The enhanced channel i2c3,
i2c4, i2c5 are controller which are designed to support
the I2C protocol.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
In order to ease reuse on other series, set DMA as optional
and use IT if no DMA channel is specified in the qspi node.
Tested on disco_l475_iot1
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add device tree description for qspi node on STM32L4 and
signals on whole family.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Setting clock-frequency as required (the driver does not build without
it) and dropping definitions that are already specified in
i2c-controller.yaml.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Replace few instances of space before colon in the binding files, not
functional, just for coherency.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
STM32L152xC SoC differs from other L1 SoCs in RAM (32KiB) and
flash (256KiB) size, EEPROM size (8Kib) and amount of interrupts
(57, see STM32Cube). Devicetree and Kconfig support.
Signed-off-by: Noelle Clement <noelleclement@hotmail.com>
after 7c699348a8
Convert drivers to new DT device macros
now the device name is aligned with label so we need
align them to default config
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
This patch adds IRQ priority support for SiFive PLIC by device-tree.
Some IRQ sources of plic use Kconfig to set priority of their IRQ.
- AON: no driver
- I2C, SPI, PWM: not use IRQ
- GPIO, UART: default 1
So this patch specifies IRQ priority 1 for all sources.
Currently these drivers (gpio and uart) do not support that they get
and use IRQ priority from device-tree. We need more patches.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
The npcx7m6fb dts defines i2c controller and ports, where the controller
is a property in the port node definition and the device nodes should be
defined as subnodes of the port.
This changes the binding definitions to reflect that, defining the port
as an i2c-controller so that in can inherit sub-nodes for i2c devices,
and the controller as a generic node.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
jedec,jesd216.yaml has properties for any memory device that conforms
to the JESD216 specification. This file at a minimum should be
included in the binding for any driver that interacts with such a
device.
jedec,spi-nor-common.yaml extends jedec,jesd216 with additional
parameters useful for memory devices that are not available from
standard JESD216 parameter tables. This file may be included instead
of jedec,jesd216.yaml if a driver is able to support additional
functionality related to the extended description.
jedec,spi-nor.yaml remains the binding for the Zephyr SPI_NOR driver
alone.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add binding for the Nordic ECB (AES electronic codebook mode
encryption) peripheral and corresponding devicetree nodes for
nRF SoCs that feature this peripheral.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Since MDK was updated and now it contains the definition of QDEC
peripheral for nRF52805, the DT node representing this peripheral
can be processed normally.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
"st,mem2mem" property is supposed to be limited to dma-v1.
Remove its use in dma-v2 components.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2 versions of DMA hardware blocks could be found across stm32 series.
In order to simplify the handling of matching Kconfig symbols,
make this visible in dts files by creating "st,stm32-dma-v1" and
"st,stm32-dma-v2" and set them accordingly in dtsi files.
Duplicate and update related bindings to reflect that new state.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Tigerlake H has less RAM and fewer cores. Both should be
supported, selectable at the board level. For now use the H
configuration as more readily available for testing.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
The STM32F105xx is effectively an STM32F107xx without Ethernet. As such,
it's possible to include the STM32F105's device tree from STM32F107, and
add in any additional nodes (currently just DMA2, though according to
the datasheet, this may be supported by the STM32F105xx and other parts
too).
Signed-off-by: Attie Grande <attie.grande@argentum-systems.co.uk>
Create a common binding file that will be included by all bindings
handled by iis2dlpc driver. For now this includes optional drdy-gpios
property and it is shared by the i2c and spi version of the driver.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The interrupt numbers for two socs for the gpio peripheral was wrong.
This commits corrects this issue for the relevant socs.
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
The watchdog and rng nodes were a sub-node of the gpio node.
This commits corrects this issue for the relevant socs.
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
Adds support for ADC on G0 series.
Simple implementation: sequencer not fully configurable,
and only one common sampling time.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
There are some drivers in the tree that support devices on multiple
different buses, although so far this has not been represented in
device tree using the bus concept. In order to convert these drivers &
bindings to refer to a formal bus in device tree we need to be able to
match bindings which lack an explicit "on-bus: ..." value against any
parent bus. This will also be needed for any external bindings, since
those would not be aware of on-bus (as it's a Zephyhr-specific
extension).
The two drivers I'm particularly targeting is the ns16550 UART driver
(drivers/serial/uart_ns16550.c) and the DW I2C driver
(drivers/i2c/i2c_dw.c). They both support devices with a fixed MMIO
address as well as devices connected and discovered over PCIe. The
only issue is that instead of encoding the bus information the proper
DT way these bindings use a special "pcie" property in the DT node
entries to indicate whether the node is on the PCIe bus or not.
Being able to convert the above two drivers to use the DT bus concept
allow the removal of "hacks" like this:
if DT_INST_PROP(0, pcie) || \
DT_INST_PROP(1, pcie) || \
DT_INST_PROP(2, pcie) || \
DT_INST_PROP(3, pcie)
to the more intuitive:
if DT_ANY_INST_ON_BUS_STATUS_OKAY(pcie)
This also has the benefit that the driver doesn't need to make any
arbitrary assumptions of how many matching devices there may be but
works for any number of matches. This is already a problem now since
e.g. the ns16550 driver assumes a maximum of 4 nodes, whereas
dts/x86/elkhart_lake.dtsi defines up to 9 different ns16550 nodes.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch adds the driver for Omnivision OV7725
Color CMOS VGA Sensor.
The driver currently provides a simple capture
function, the output format only provides
RGB565,640x480.
Signed-off-by: Frank Li <lgl88911@163.com>
This patch enables the rtc clock on the stm32g4 soc
from STMicroelectronics.
Even if the set by default (reset value of theRCC_APB1ENR)
the bit is marked as 1.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Instead of hard-coded values for interrupt priorities in DT nodes, use
a macro that additionally can be overridden at the board or application
level. This allows, for instance, changing the interrupt priorities for
all but one peripheral without using a lengthy overlay file.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This file originally added a "nordic,nrf-sw-pwm" node with a few basic
properties that were common to all nRF51 and nRF52 series SoCs. There
is no implementation of SW_PWM available for other nRF series. At the
time this file has been created, there was only nRF91 apart from nRF5x,
but when nRF53 appeared, the name of this file became misleading.
Recent addition of common disabling of the systick node made it clear
that such common file for all nRF SoCs is convenient.
To prevent further confusion, rename this file to nrf_common.dtsi and
keep there only stuff actually common to all nRF series, moving the
SW_PWM related node to particular SoCs that use it (this is actually
consistent with how all other nodes, that also have some properties
common to several or even all nRF SoCs, are defined).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Change io status of host-uart device to "disabled". It was caused by a
mistake during solving conflicts.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Add a new display-inversion property to ili9xxx based display drivers to
send a "Display Inversion ON (0x21)" command during initialization.
This seems to be required for some ILI9xxx based displays to work
correctly, such as BuyDisplay ER-TFT028A2-4 (ILI9341 basd IPS display).
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Define a binding for zephyr,fstab which contains multiple child nodes
each of which identifies a file system type and configuration
parameters and associates it with a fixed partition. The base entry
properties specify the mount point and other generic fs mount options,
while bindings specific to a file system type provide the
configuration parameters necessary to describe the file system.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This change adds support for configurable interrupt capabilities
in the emulated GPIO controller via Devicetree bindings.
Fixes#26477
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
The NPCX SMB modules provides full support for a two-wire SMBus/I2C
synchronous serial interface. Each SMBus/I2C interface is a two-wire
serial interface that is compatible with both Intel SMBus and Philips
I2C physical layer. There are 8 SMBus modules and 10 buses in NPCX7
series.
In NPCX7 series, the SMB5 and SMB6 modules contain a two-way switch to
support two separate SMBus/I2C buses (ports) with one SMB module
(controller) Please refer Section 4.7.2 in the datasheet. In order to
support it, this CL seperates the i2c driver into port and controller
drivers. The controller driver is in charge of i2c module operations
and internal state machine. The port driver is in charge of pin-mux
and connection between Zehpyr i2c api interface and controller driver.
All of modules have separate 32-byte transmit FIFO and 32-byte receive
FIFO buffers. These FIFO buffers reduce firmware overhead during long
SMBus transactions by allowing the Core to write or read more than one
data byte at a time to/from the SMB module.
The CL also includes:
— Add npcx i2c port/controller device tree declarations.
— Zephyr i2c api implementation.
— Add "i2c-0" aliases in npcx7m6fb.dts for i2c test suites.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
The System Glue module includes the three major functions:
— Power Switch Logic (PSL)
— SMBus multi-bus, wake-up support
— Simple Debug Port (SDP)
In NPCX7 series, the SMB5 and SMB6 modules contain a two-way switch to
support two separate SMBus/I2C buses (ports) with one SMB module
(controller). Since a single SMB module is able to serve only one
SMBus/I2C bus at a time, SMB_SEL registerin Glue module is used to
control theconnection of I2Cn_0 and I2Cn_1 interface pins to the SMBn
module (where n is 5, 6).
This CL provides a soc specific pin-control function called
"soc_pinctrl_i2c_port_sel" to switch buses (port) of the same SMB module
(controller). It will be used in the following i2c driver.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
This commit adds the dtsi config for the stm32f303k8.
In addition fixing to long line for author.
Fixing sram0 memory size.
Signed-off-by: Sebastian Schwabe <sebastian.schwabe@mailbox.tu-dresden.de>
Use PPIs 0-5 consistently across nRF51x and nRF52x for SW
PWM driver. Bluetooth LE controller's use of PPI has been
adjusted to use PPI 6-19 based on features enabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Convert drivers to use pinmux devicetree node to create pinmux device
object.
On intel S1000 we add 'label' as a required property and set it to
'PINMUX' to match CONFIG_PINMUX_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Currently, the only user of the Designware DMA controller
only needs the channel property. So make dma-cells to be
constant of 1.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add 'label' as a required property for nxp,kinetis-pinmux devices. In
addition we cleanup the kw2xd node labels for the pinmux devices to
match the SoC docs and use 'port' instead of 'pinmux_'.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Apart from the previously added pins, nRF21540's GPIO interface includes
also MODE pin. This commit adds it to the relevant binding.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
The nRF21540 radio front-end-module can optionally be controlled by a
SPI interface. Add a binding and property to link the SPI bus
configuration data to the FEM node.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This device is not an ARM MCU, it's a radio front-end module. Based
on existing Linux practice it belongs in net/wireless.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The previous API can't change the sampling-point and only allowed
bitrates that fit the time segments.
The new API allows for shifting the sampling-point and adjusts the
number of time quantum in a bit to all more possible bitrates.
The functions to calculate the timings are moved to the can_common file.
They can be used for all drivers.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
This commit is about it8xxx2 platform device tree.
Add driver's binding files, and one device tree as sample.
Signed-off-by: Cheryl Su <cheryl.su@ite.com.tw>
So far nRF's TIMER was used for generating PWM signal. Add support for
generating PWM based on RTC, which is sourced by 32KHz low frequency
crystal. This allows to use low frequency PWM with much lower power
consumption, because high frequency clock path can be disabled.
Don't support RTC clock prescaler, because maximum 512s period covers
most use cases. This allows to adjust pulse and period cycles to the
fact that CLEAR task event is generated always one LFCLK cycle after
period COMPARE value is reached.
Also update hal_nordic revision, as it contains updated check for PPI
channels conflict when RTC is used to generate PWM.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
So far 'timer-instance' DT property was the way to configure TIMER which
was used for generating PWM signal. Replace that by using 'generator'
phandle, so we get prepared for supporting RTC instances as PWM signal
generator.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Flash controller support is not yet ready on M4 core.
Remove the chosen declaration to make it clear.
Additionally, generate a build error if this driver is compiled
on M4 core.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Define erase and write block size for M4 side flash controller.
Additionally move compatible definition from package to soc file.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Define write and erase block size for supported stm32h7 devices
Use a specific compatible string for stm32h7 devices for the flash
driver
Signed-off-by: Nicolas VINCENT <nicolas.vincent@vossloh.com>
Test macro DT_PROP_BY_PHANDLE_IDX_OR. There are two tests, one when
the property exists and other when the property is not set.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add power state property binding and include this property in cpu.
The pm-state attribute is a enum that matches with enum pm_state right
now the only timing attribute is the minimum residency that is the
minimum time for a power state be worthwhile.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
In order to prevent user turns on the pin-mux of devices has io-pads
unexpectedly, this CL added a new device definition for host uart
device. The pin-mux of host uart interface is enabled only if we set its
status as "okay" in dts file of board folder.
The following npcx7 drivers will meet:
1. Default status property of npcx devices with io-pads such as espi,
pwm, uart, host uart and so on should be "disabled".
2. Switch pin-mux by changing status property to "okay" in dts file of
board folder.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
It is put into interrupt controller since it expands some capabilities
of existing interrupt controllers.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Define write and erase block size for supported stm32h7 devices
Use a specific compatible string for stm32h7 devices for the flash
driver
Signed-off-by: Nicolas VINCENT <nicolas.vincent@vossloh.com>
NPCX7 includes a 10-bit resolution Analog-to-Digital Converter (ADC). Up
to 10 voltage inputs can be measured and a internal voltage reference
(VREF), 2.816V (typical) is used for measurement. It can be triggered
automatically in Autoscan mode. Each input channel is assigned a
separate result register, which is updated at the end of the conversion.
The CL also includes:
— Add npcx adc device tree declarations.
— Zephyr adc api implementation.
— Add adc definitions of npcx7 in
tests/drivers/adc/adc_api/src/test_adc.c for supporting test suites.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
This adds bindings for the LiteX clock control driver.
Signed-off-by: Pawel Czarnecki <pczarnecki@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
SRAM base address and size are currently hardcoded in the defconfig.
This is wrong because symbols like KERNEL_RAM_SIZE and KERNEL_VM_BASE
are not currently being set. Fix this by adding the correct DTS entry.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
STM32H753xx is similar to STM32H743xx except that it has crypto/hash
hardware acceleration and the memory configuration is always 2Mbytes
flash and 1Mbyte RAM.
Signed-off-by: Petri Oksanen <petri@iote.ai>
These were found while reviewing the device tree and register addresses.
They are now the same as for the LPC55S28.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
sram4 is not connected to USB. The following sram area that is not part
of the device tree is. So the comment is removed with this commit.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Remove the zephyr,flash-controller chosen node from the NXP KW40Z SoC
series devicetree. The MCUX SDK version for this SoC is too old to work
with the Zephyr MCUX flash driver shim.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Adding support for Quectel BG95 Modem offloaded driver
to zephyr.
The driver currently implements only the
client side functions of the "socket_op_vtable", and
so cannot be used for cases where Zephyr acts as a
server. Moreover the driver only supports TCP for now.
Looking through the guides, the same driver should be
usable for BG96 (and other modems) except for the modem
boot-up sequence. Hence its named as "bg9x" instead of
"bg95".
Tested extensively with Zephyr acting as MQTT endpoint
and publishing / subscribing data to / from an MQTT
broker.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
Add tx/rx pl330 channel IDs for the iProc PCIe client usage.
pl330 channel 0 is allocated for Tx DMA (Device to Host write) and
pl330 channel 1 is allocated for Rx DMA (Host to Device read).
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
Add dma-cells property in pl330 dma binding document.
Currently only one integer cell with "channel" name is
added in order for the client to specify channel id
to be used for data transfer out of available channels.
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
This commit adds a new driver category for memory controller
peripherals. There is no API involved for now, as it has not been found
necessary for first implementation.
STM32 Flexible Memory Controller (FMC) is the only controller supported
for now. This peripheral allows to access multiple types of external
memories, e.g. SDRAM, NAND, NOR Flash...
The initial implementation adds support for the SDRAM controller only.
The HAL API is used, so the implementation should be portable to other
STM32 series. It has only been tested on H7 series, so for now it can
only be enabled when working on H7.
Linker facilities have also been added in order to allow applications to
easily define a variable in SDRAM.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Update nrf21540 DTS to support FEM configuration and update other pins
according to te board datasheet
Signed-off-by: Jakub Pegza <Jakub.Pegza@nordicsemi.no>
Currently there is no binding for RISC-V Core-Local Interruptor.
This patch add a simple binding.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
RISC-V clint is an interrupt controller but it has no required
properties (#interrupt-cells and interrupt-controller).
This patch just adds missing properties.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Add Atmel SAM I2C Two-wire Master Interface (TWIM). The SAM
i2c controller have specifics regs depending of operation mode
Master/Slave and the bindings are for Master only.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The YAML binding allows for a default which is used to substitute a
value if one is not explicit in the devicetree source. This feature
is mis-used when defaults are provided that are likely to be
incorrect.
Document concerns with the use of default and provide guidance for
when it can be used, what to do when it shouldn't, and noting the need
to explain the source of the default in the binding documentation.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add i2c1 interface for stm32l552xx and stm32l562xx microcontrollers
and enable i2c1 that connects to lsm6dso sensor module on the
stm32l562e_dk board.
Signed-off-by: Yestin Sun <sunyi0804@gmail.com>
Add devicetree bindings for the Xilinx AXI Timer IP. This timer can
either be used as a counter or as a PWM controller.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Converts fxos8700 magnetic vector magnitude options from Kconfigs to
optional device tree properties.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Converts fxos8700 power mode options (normal, low noise low power, high
resolution, low power) from Kconfigs to an optional device tree
property.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Converts fxos8700 range options (2g, 4g, 8g mode) from Kconfigs to an
optional device tree property.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Made sram0 visible for NETWORK core target. The core might
access sram0 as shared region might be defined inside it.
Made sram1 visible for APPLICATION core target for keeping
consistence.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
LIS3DH and LIS2DH12 devices share the same driver with
LIS2DH device. So, the bindings are reusing the same
common structure (as LSM30AGR-ACCEL and LSM303DLHC-ACCEL
devices are already doing)
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Removes peripheral aliases from the OpenISA RV32M1 SoC, which are no
longer being used after converting their associated drivers to use
DT_INST macros.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Removes peripheral aliases from all NXP SoCs (Kinetis, LPC, and i.MX),
which are no longer being used after converting their associated drivers
to use DT_INST macros. The watchdog alias remains because it is used by
tests/drivers/watchdog/wdt_basic_api/
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This adds support for GRLIB GPTIMER general purpose timer used in
LEON3/4/5 systems.
One of the GPTIMER subtimers is used to generate periodic interrutps
for announcing ticks. Another subtimer is used as upcounter for the
cycle_get_32() service.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
This adds support for the GRLIB APBUART UART peripheral commonly used in
LEON3/4/5 systems.
Driver features:
- Auto-detecting debug FIFO, if configured by GRMON
- Setting and getting UART transfer attributes
- Hardware FIFO if available
- Any number of APBUART devices based on devicetree
- Error status indication
- Polled operation
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
This adds support for the GRLIB IRQMP interrupt controller commonly used
in LEON3/4/5 systems.
The driver supports the 15 SPARC interrupts and 16 extended interrupts.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
These MCUs have 32Kbytes of Flash and 8Kbytes of RAM. They are still
able to run a number of samples.
Signed-off-by: Steven Daglish <s.c.daglish@gmail.com>
The number of capture/compare registers available on a peripheral
should be exposed in devicetree.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Make this driver multi-instance and use the new API.
Notes for sensorhub mode:
In case of multiples devices it is possible that some of them
has i2c slaves attached to it (sensorhub mode) but not the
others. Since the driver is configured in the same way for
all the instances (CONFIG_SENSORHUB=y), the routine that initialize
the sensorhub part does not fail anymore in case no slaves
are found for a particular instance. Instead, those non-sensorhub
driver instances will set the shub_inited flag to false and
will totally ignore the feature.
Notes for triggers:
In case of multiples devices the device pin the interrupt wire is
attached to can be different (INT1 or INT2 pin). So, this
information has been moved in DTS and then stored in the
specific instance config structure.
Currently the driver is able to handle a sngle interrupt line
at a time attached to either INT1 or INT2.
MOreover, the interrupt initialization for a driver instance proceed
only if the drdy has been configured in its DT, else it returns ok.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Make driver generic for multiple ILI displays. The adopted strategy is
to share all driver code except register initialization, which has been
found to have some specific registers/values depending on the
controller.
The driver has been adjusted to support multiple compatibles.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The nRF5340 (P)DK is equipped with the MX25R64 flash memory. Add a dts
node for that chip in the board definition as well as the missing QSPI
node in the nRF5340 SoC definition.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Reworks the mcux ethernet driver to use DT_INST_FOREACH_STATUS_OKAY and
eliminate a lot of duplicate code between instance 0 and instance 1.
Renames the ERR_MISC interrupt to ERR due to an issue with the
underscore in the device tree preprocessor macros.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add uart bus interface to extended esWIFI driver. This enables all
Inventek modules with IWIN AT Commands firmware.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Add support for configuring Ethernet pins using DT pinctrl entries. Note
that F1 series pinctrl support is not handled as the driver does not
support F1.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Channels 4..7 are multiplexed on adc16. The NXP HAL exposes
ADC16_SetChannelMuxMode but this function is not yet included
in Zephy. The following patch adds channel-mux-b to the dts
enabling the use of the alternate channels of 16 bit adc.
Signed-off-by: Andreas Dröscher <github@anticat.ch>
Add the ability to mark a property as 'deprecated' to get a warning that
it will be removed in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Refactors nxp i.mx, kinetis, and lpc soc-level device trees to use
DT_SIZE_K and DT_SIZE_M macros to define internal memory sizes. This is
self documenting and easier to read.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This provides structure for the regulator device hierarchy and a
driver for GPIO-controlled regulators along with its binding.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This PR follows Linux in defining devicetree content for generic
voltage and current regulators, and an initial driver API for
controlling them.
A regulator itself may depend on a power source, so it needs to
support the properties that enable that power source.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Provide a common set of properties for various ways of controlling
power:
* supply-gpios for a GPIO specifier acting like a switch
* vin-supply for a reference to a regulator device
Document the behavior expected when these properties are present.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The DMA bindings had duplicate description: keys. Merge the two
descriptions into one to fix the issue.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We aren't using vnd,serial for anything currently. Remove requiring
interrurpts property as that requirement isn't needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Allows the use of pin interrupt and callbacks for pca95xx family
GPIO expander chips with an interrupt line.
Enable config flag and define a gpio pin for the expander interrupt-
line (INT) in devicetree and the driver will accept pin interrupt
configurations for the expander gpio pins.
Level triggering is supported through emulation.
A worker is used to avoid waiting for I2C in ISR.
Example devicetree node:
gpioext0: tca9539@77 {
compatible = "nxp,pca95xx";
label = "GPIO_EXT_0";
reg = <0x77>;
interrupt-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <16>;
};
Fixes: #27561
Signed-off-by: Bent Ove Stinessen <bent@norbit.no>
MSI-X PVM feature requires snoop interrupt for tracking configuration
space register (msix_cap) update and PCIe PMON lite interrupt for
tracking MSI-X table update. Add both the interrupts for Viper M7 DT.
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
In fixing up the altera vendor prefix, we forgot to rename the binding
files to match the compatible.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There are a few cases in which "altera" was used instead of "altr" as
the vendor prefix. Update DTS and bindings in those cases to use "altr"
Fixes#29373
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The DMA channel number used for the DMA transfer can now
be specified from the device tree config files
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Significant rework of the Intel Audio DSP SoC/board layers. Includes
code from the following upstream commits:
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Thu Jun 25 16:34:36 2020 +0100
xtesna: adsp: use 50k ticks per sec for audio
Audio needs high resolution scheduling so schedule to nearest 20uS.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Wed Jun 24 13:59:01 2020 -0700
soc/xtensa/intel_adsp: Remove sof-config.h includes
This header isn't used any more, and in any case shouldn't be included
by SoC-layer Zephyr headers that need to be able to build without SOF.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Sat Jun 20 15:42:58 2020 -0700
soc/intel_adsp: Leave interrupts disabled at MP startup
This had some code that was pasted in from esp32 that was inexplicably
enabling interrupts when starting an auxiliary CPU. The original
intent was that the resulting key would be passed down to the OS, but
that's a legacy SMP mechanism and unused. What it actually did was
SET the resulting value in PS.INTLEVEL, enabling interrupts globally
before the CPU is ready to handle them.
Just remove. The system doesn't need to enable interrupts until the
entrance to the first user thread on this CPU, which will do it
automatically as part of the context switch.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 23 13:57:54 2020 +0300
dts: intel_cavs: Add required label
Add required label fixing build for CAVS15, 20, 25.
Fixes following errors:
...
devicetree error: 'label' is marked as required in 'properties:' in
bindings/interrupt-controller/intel,cavs-intc.yaml,
but does not appear in
...
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 23 15:19:56 2020 +0300
soc: cavs_v18: Remove dts_fixup and fix build
Remove unused now dts_fixup.h and fix build with the recent code base.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 23 15:12:25 2020 +0300
soc: cavs_v20: Remove dts_fixup and fix build
Remove unused now dts_fixup.h and fix build with the recent code base.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 23 14:59:23 2020 +0300
soc: cavs_v25: Remove dts_fixup fix build
Remove unused now dts_fixup and fix build with the latest code base.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri Jun 12 12:29:06 2020 +0300
soc: intel_adsp: Remove unused functions
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 17:53:58 2020 +0300
soc: intel_adsp: Clean up soc.h
Remove unused or duplicated definitions.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 17:02:23 2020 +0300
soc: intel_adsp: De-duplicate soc.h
Move soc.h to common SOC area.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 15:54:19 2020 +0300
soc: intel_adsp: Remove duplicated io.h
Move duplicated io.h to common SOC area.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri Jun 12 12:39:46 2020 +0300
cmake: Correct SOC_SERIES name for byt and bdw
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri Jun 12 12:39:02 2020 +0300
soc: intel_adsp: Build bootloader only for specific SOCs
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Thu Jun 11 13:46:25 2020 +0100
boards: xtensa: adsp: add byt and bdw boards WIP
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Wed Jun 10 10:01:29 2020 -0700
soc/intel_adsp: Make the HDA timer the default always
The CAVS_TIMER was originally written because the CCOUNT values are
skewed between SMP CPUs, so it's the default when SMP=y. But really
it should be the default always, the 19.2 MHz timer is plenty fast
enough to be the Zephyr cycle timer, and it's rate is synchronized
across the whole system (including the host CPU), making it a better
choice for timing-sensitive applications.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 15:21:43 2020 +0300
soc: cavs_v25: Enable general samples build
Enables general samples build for SOC cavs_v25.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 15:13:53 2020 +0300
soc: cavs_v20: Enable general samples build
Enable general sample build.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 14:35:13 2020 +0300
soc: cavs_v18: Fix build general samples
Fix building general samples for CAVS18.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 14:22:40 2020 +0300
soc: intel_adsp: Add support for other SOCs
Support other SOCs in the "ready" message to the Host.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 13:25:39 2020 +0300
soc: intel_adsp: Move adsp.c to common SOC area
Move adsp.c to common and clean makefiles.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 17:18:18 2020 +0300
boards: intel_adsp: Remove dependency on SOF
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue Jun 9 14:29:44 2020 +0100
soc: xtensa: cavs: build now good for cavs20 + 25
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 15:57:01 2020 +0300
soc: cavs_v15: Fix build for hello_world
Fix build for other then audio/sof targets.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 14:50:12 2020 +0300
sample: audio/sof: Remove old overlays
Removing old overlays used to switch logging backend.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon Jun 8 15:02:01 2020 +0300
soc: intel_adsp: Correct TEXT area
Correct HEADER_SPACE and put TEXT to:
(HP_SRAM_WIN0_BASE + HP_SRAM_WIN0_SIZE + VECTOR_TBL_SIZE)
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 14:44:47 2020 +0300
soc: intel_adsp: Trivial syntax cleanup
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 14:41:07 2020 +0300
soc: intel_adsp: Fix bootloader script path
Make it possible to find linker script if build is done not inside
ZEPHYR_BASE.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue Jun 9 12:10:17 2020 +0100
soc: xtensa: cavs20/25: fix build with new headers - WIP
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 13:35:38 2020 +0300
soc: intel_adsp: Fix include headers
Fixes include headers
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue Jun 9 10:38:50 2020 +0100
soc: xtensa: cav18: updated headers- WIP
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Fri May 1 15:29:26 2020 -0700
soc/xtensa/intel_adsp: Clean up MP config logic
CONFIG_MP_NUM_CPUS is a platform value, indicating the number of CPUs
for which the Zephyr image is built. This is the value kernel and
device code should use to predicate questions like "is there more than
one CPU?"
CONFIG_SMP is an application tunable, controlling whether or not the
kernel schedules threads on CPUs other than the first one. This is
orthogonal to MP_NUM_CPUS: it's possible to build a "SMP" kernel on a
uniprocessor system or have a UP kernel on a MP system if the other
cores are used for non-thread application code.
CONFIG_SCHED_IPI_SUPPORTED is a platform flag telling an SMP kernel
whether or not it can synchronously signal other CPUs of scheduler
state changes. It should be inspected only inside the scheduler (or
other code that uses the API). This should be selected in kconfig by
soc layer code, or by a driver that implements the feature.
CONFIG_IPM_CAVS_IDC is a driver required to implement IPI on this
platform. This is what we should use as a predicate if we have
dependence on the IPM driver for a platform feature.
These were all being sort of borged together in code. Split them up
correctly, allowing the platform MP layer to be unit tested in the
absence of SMP (c.f. tests/kernel/mp), and SMP kernels with only one
CPU (which is pathlogical in practice, but also a very good unit test)
to be built.
Also removes some dead linker code for SMP-related sections that don't
exist in Zephyr.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Jun 8 16:41:55 2020 +0100
soc: xtensa: bootloader - use linker script
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Jun 8 16:26:18 2020 +0100
soc: xtensa: further fix headers - WIP
Simplify the directory structure, WIP for cavs20 and cavs25
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon Jun 8 12:59:30 2020 +0300
soc: cavs_v15: Remove unneeded include
Remove include fixing build.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun Jun 7 12:37:35 2020 +0100
soc:xtensa: adsp: remove sof specific code from soc headers
TODO: v1.8+
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Marc Herbert <marc.herbert@intel.com>
Date: Thu Jun 4 23:19:37 2020 -0700
intel_adsp_*/doc: fix duplicate .rst labels
Quick fix purely to make the build green again.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Author: Marc Herbert <marc.herbert@intel.com>
Date: Thu Jun 4 22:34:40 2020 -0700
samples/audio/sof: use OVERLAY_CONFIG to import apollolake_defconfig
This reverts commit 21f16b5b1d29fca83d1b62b1b75683b5a1bc2935 that
copied it here instead.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri Jun 5 12:34:48 2020 +0300
soc: intel_adsp: Move soc_mp to common
Moving soc_mp to common SOC area, it still needs fixes for taking
number of cores from Zephyr Kconfig, etc.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Jun 4 16:05:06 2020 +0300
soc: intel_adsp: Move memory.h from lib/
For those files from SOF referencing platform/lib/memory.h we have
include.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Jun 4 15:20:09 2020 +0300
soc: intel_adsp: Rename platform.h to soc.h
Rename to prevent including it from SOF.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Jun 4 11:47:55 2020 +0300
soc: intel_adsp: Move headers
Move headers to more convenient place
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Jun 4 11:21:51 2020 +0300
soc: intel_adsp: More SOC cleaning
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Marc Herbert <marc.herbert@intel.com>
Date: Mon Jun 1 15:31:34 2020 -0700
samples/audio/sof: import sof/src/arch/xtensa/ apollolake_defconfig
Import modules/audio/sof/src/arch/xtensa/configs/apollolake_defconfig
into prj.conf and new boards/up_squared_adsp.conf
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Jun 3 15:07:40 2020 +0100
soc:xtensa: adsp: let SOF configure the DSP for audio
Let SOF do this for the moment.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Jun 3 15:06:20 2020 +0100
soc: xtensa: cavs: remove headers similar to cavs15
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 3 15:58:38 2020 +0300
soc: intel_adsp: Move ipc header to common
Remove duplicated headers from CAVS to common SOC part
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 3 13:02:09 2020 +0300
soc: cavs_v15: Remove unneeded headers
Remove also from CAVS15.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 2 18:34:11 2020 +0300
Remove more headers
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Jun 3 14:12:09 2020 +0100
soc: xtensa: remove cavs sod headers for drivers and trace.
Duplicate cavs15 headers.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Jun 3 14:05:12 2020 +0100
samples: move sof dai, dma and clk configs to SOF
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 2 17:38:45 2020 +0300
soc: intel_adsp: Remove more duplicated headers
Remove more headers
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue Jun 2 15:50:03 2020 +0100
samples: sof: remove pm realted files.
Use the SOF versions.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 2 16:55:40 2020 +0300
WIP: Strip lib from include path
WIP, pushed for sync
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 2 14:44:33 2020 +0300
soc: intel_adsp: Remove more headers
Remove even more common headers
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 2 14:00:47 2020 +0300
soc: intel_adsp: Remove SOF headers
The headers would be used by audio/sof app directly from SOF module.
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Sat May 30 11:01:26 2020 -0700
soc/intel_adsp: Alternative log reading script
This script speaks the same protocol and works with the same firmware,
but:
* Is a single file with no dependencies outside the python3 standard
library and can be run out-of-tree (i.e. with setups where the
firmware is not built on the device under test)
* Operates in "tail" mode, where it will continue polling for more
output, making it easier to watch a running process and acting more
like a conventional console device.
* Has no dependence on the diag_driver kernel module (it reads the DSP
SRAM memory directly from the BAR mapping in the PCI device)
* Is MUCH smaller than the existing tool.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu May 28 16:17:51 2020 +0300
Decrease HEP pool size to 192000
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 29 10:27:00 2020 +0100
soc: xtensa: cavs25: complete support for cavs25
Builds, not tested on qmeu due to missing SOF ROM (TODO)
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 29 10:24:26 2020 +0100
soc: xtensa: cavs20: complete cavs20 support
Now boots on qemu.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 29 10:22:13 2020 +0100
soc: xtensa: cavs18: complete boot support
Now boots on qemu.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 29 10:19:23 2020 +0100
soc: xtensa: cavs15: use cavs15 instead of apl as linker soc name
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 29 10:16:06 2020 +0100
TODO: samples: sof: work around missing trace symbols.
Disable local trace.
Needs trace updates finished before this can be removed.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed May 27 15:57:19 2020 +0100
dts: xtensa: rename apl to cavs15 DTS
This DTS is used by more than APL SOC. i.e. all CAVS15 SOCs
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed May 27 15:52:20 2020 +0100
west: commands: sign: Add signing support for other CAVS targets
Sign for CAVS15, CAVS18, CAVS20 and CAVS25 SOCs
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed May 27 15:50:07 2020 +0100
boards: xtensa: cavs: used Zephyr mask macro
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed May 27 15:49:46 2020 +0100
soc: xtensa: move code to SOF
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue May 26 11:40:36 2020 +0100
soc: xtensa: use SOF versions of clk
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 18:38:45 2020 +0300
soc: intel_adsp: Send FW ready for non SOF configuration
Configure windows and send FW ready when used without SOF, should be
loaded with fw_loader script.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 18:02:22 2020 +0300
soc: intel_adsp: Use SOF version of the file
Use exact copy from SOF module.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 17:47:27 2020 +0300
soc: intel_adsp: Clean up include headers
Remove SOF mentions from the SOC headers.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 17:43:05 2020 +0300
soc: intel_adsp: Move SOF specific code to samples/audio/sof
Move SOF specific code to the SOF sample.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 17:39:42 2020 +0300
soc: intel_adsp: Use SOF module's version of mem_window.c
Use exact copy from SOF module.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 17:36:41 2020 +0300
soc: intel_adsp: Use exact copy from SOF module
Use SOF module verion of the clk.c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 14:03:35 2020 +0300
soc: xtensa: Add {SOC_FAMILY}/common/include path
Add ${SOC_DIR}/${ARCH}/${SOC_FAMILY}/common/include path if exist.
Fixes issues for xtensa SOCs.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon May 25 16:18:50 2020 +0100
soc: xtensa: cavs common: fix headers for build
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon May 25 16:10:57 2020 +0100
soc: xtensa: adsp: add so_inthandlers.h for Intel platforms
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon May 25 16:08:26 2020 +0100
cmake: xtensa: select correct compiler per CAVS target.
TODO: what about XCC ?
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue May 19 14:59:26 2020 +0300
boards: up_squared_adsp: Move SOF configuration to samples
Move SOF-specific configuration to samples/audio/sof prj.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri May 15 15:29:50 2020 +0300
soc: intel_adsp: Move SOF code to modules/audio/sof
Move SOF dependent code out of SOC area.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu May 14 17:30:38 2020 +0300
Move task_main_start() to audio/sof sample
Start task_main_start() from main of audio/sof sample.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed May 13 15:37:20 2020 +0300
Rename up_xtreme_adsp to intel_adsp_cavs18
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon Apr 27 14:12:59 2020 +0300
Add sample audio/sof for SOF initialization
Add dedicated sample where we put SOF specific initialization.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 11 18:49:36 2020 +0300
WIP: soc: cavs_v18: Cleanup
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 11 15:44:06 2020 +0300
soc: cavs_v15: Move soc init to common part
Moving SOC init to the right place.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 11 15:02:28 2020 +0300
soc: intel_adsp: Move common part to special dir
Moving common part to common/adsp.c
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri May 8 14:37:50 2020 +0300
boards: up_xtreme_adsp: Add initial up_xtreme_adsp board
Add initial board copying existing up_squared_adsp board and using
CAVS1.8 SOC family.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu May 7 15:30:51 2020 +0300
soc: intel_adsp: Generalize bootloader
Move bootloader to soc/xtensa/intel_adsp making it available for other
boards.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue May 5 21:31:00 2020 +0100
boards: xtensa: up_squared: Add support for all CAVS
Add boot support for all CAVS versions. TODO: needs to be made common
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue May 5 21:25:34 2020 +0100
soc: xtensa: intel_adsp: Manage cache for DMA descriptors
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon May 4 21:10:50 2020 +0100
soc: xtensa: adsp: use 24M567 clock
Use audio clock
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon May 4 10:04:01 2020 +0100
xtensa: soc: adsp: enable system agent
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun May 3 15:03:07 2020 +0100
soc: xtensa: intel_adsp: increase mem pool to 192k
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun May 3 15:02:31 2020 +0100
soc: xtensa: intel_adsp: re-enable DMA trace
Buffer will be empty (as trace items sent to Zephyr LOG) but
logic is running.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun May 3 11:18:55 2020 +0100
soc: xtensa: intel: dont use uncache region yet.
Some code was still using this region. Use later.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun May 3 10:07:28 2020 +0100
soc: xtensa: intel_adsp: fix notifier init
Topology now loads.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 1 21:18:38 2020 +0100
boards: up2: Need to use sof config for bootloader
This will need uncoupled at some point. For testing today.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 1 21:16:38 2020 +0100
boards: up2: increase heap to 128k
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Apr 30 11:35:19 2020 +0300
boards: up_squared_adsp: Use bigger HEAP
Use HEAP from old demo.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 1 16:06:32 2020 +0100
soc: xtensa: intel_adsp: Fix config.h naming collisions
Rename sof version to sof-config.h
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Apr 30 11:22:42 2020 +0300
Small cleanups
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Apr 29 22:00:44 2020 +0300
tests: sof/audio: Test ll scheduler
Add more tests for scheduler.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Apr 29 18:38:35 2020 +0300
tests: Add first schedule test
Add initial test for testing scheduling.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Apr 29 13:36:23 2020 +0100
soc: xtensa: rmeove build warnings
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Apr 28 18:04:33 2020 +0300
soc/intel_adsp: Register sof logging
Register sof logging for tracing
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Apr 28 14:16:55 2020 +0300
boards: up_squared_adsp: Define HEAP_MEM_POOL_SIZE
Define HEAP_MEM_POOL_SIZE when SOF enabled.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Apr 28 10:09:20 2020 +0300
tests: audio/sof: Add interrupt API for testing
Add initial interrupt API for testing.
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 27 15:54:28 2020 +0100
soc: xtensa: adsp: Update linker script for SOF sections.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 27 11:20:01 2020 +0100
soc: xtensa: adsp: send SOF FW metadata as boot message
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun Apr 26 21:47:20 2020 +0100
soc: xtensa: adsp: re-enable all SOF IP init.
Do all SOF IP init.
TODO: ATOMCTL, WFI on LX6
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sat Apr 25 15:30:40 2020 +0100
soc: xtensa: irq: Make sure IPC IRQ is registered.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Apr 22 20:56:09 2020 +0300
tests: sof: Enable console
Enable console for the test.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Apr 22 17:57:22 2020 +0300
soc: cavs_v15: Fix XTENSA_KERNEL_CPU_PTR_SR
Use correct value for XTENSA_KERNEL_CPU_PTR_SR.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Apr 22 14:48:31 2020 +0300
tests: audio/sof: Add tests for alloc API testing
Add initial tests for allocation API testing. Can be extended for
other later.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Apr 21 17:49:32 2020 +0300
logging: Enable xtensa simulator backend for ADSP
Enable xtensa simulator backend for SOC_FAMILY_INTEL_ADSP.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 20:58:30 2020 +0100
soc: xtensa: add common cpu logic
Support for additional cores.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Apr 21 10:11:07 2020 +0300
Update west.yaml to point to the latest repo
Update west.yaml
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 16:17:01 2020 +0100
soc: xtensa: cavs: Fix build for clk.c on cavs18+
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 16:05:31 2020 +0100
soc: xtensa: cavs15: removed unused headers.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 16:05:09 2020 +0100
soc: xtensa: cavs25: align with SOF headers
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 16:03:52 2020 +0100
soc: xtensa: cavs20: align with SOF headers
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 16:03:09 2020 +0100
soc: xtensa: cavs18: Align with SOF headers.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 11:42:39 2020 +0100
west: sof: Updated to latest version.
Now builds, links and runs SOF code (but not to FW ready).
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun Apr 19 13:28:53 2020 +0100
xtensa: intel adsp: build in SOF symbols if CONFIG_SOF
Code now fully links against SOF. Needs to be run tested.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Wed Apr 15 10:19:28 2020 -0700
DO NOT MERGE: temporarily add thesoftproject as remote for sof module
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Wed Apr 15 10:33:40 2020 -0700
ipm: cavs_idc: use the IPC/IDC definitions in SoC
The SoC definitions have the necessary IPC/IDC bits so there is
no need to define them separately.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Apr 15 14:30:20 2020 +0100
TODO: config: Use static config for SOF module.
TODO: needs to be generated as part of SOF kconfig
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri Apr 10 21:56:07 2020 +0100
HACK: Add SOF into build
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Apr 15 13:55:15 2020 +0100
west: modules: Add SOF audio module.
Add support for building SOF as a Zephyr module. This is the starting
point for add SOF audio into Zephyr. Currently builds but does not use
any symbols yet.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Apr 15 13:48:48 2020 +0100
WIP soc: adsp-cavs15: Use same include directory structure as SOF
Use the same directory structure as SOF to simplify porting and allow
SOF to build without Zephyr until porting work is complete.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Apr 15 13:43:44 2020 +0100
WIP soc: adsp-common: Use same include directory structure as SOF
Use the same directory structure as SOF to simplify porting and allow
SOF to build without Zephyr until porting work is complete.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 16 14:36:32 2020 +0000
WIP: soc: adsp-common: cache is common across all Intel ADSP platforms
De-duplicate soc.h cache definitions.
TODO: this needs done for other common functions.
TODO: need to fix include path
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 30 11:07:43 2020 -0700
WIP: soc: cavs25: Import SOF SoC support
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 30 11:07:12 2020 -0700
WIP: soc: cavs20: Import SOF SoC support
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 30 11:06:40 2020 -0700
WIP: soc: cavs18: Import SOF SoC support
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Mon Mar 30 12:37:17 2020 -0700
soc: intel_adsp: use main_entry.S in common for cavs_v15
The files are identical anyway.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Mon Mar 30 11:38:14 2020 -0700
soc: intel_adsp/cavs_v15: link common code
Let cavs_v15 link against the code compiled under common/.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 16 13:08:28 2020 +0000
WIP: soc: common: Import SOF SoC support
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 16 14:37:32 2020 +0000
WIP soc: adsp-cavs15: build power down support
Build the power down support for CAVS1.5
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 16 12:40:17 2020 +0000
WIP: soc: cavs15: Import SOF SoC support
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 16 14:30:08 2020 +0000
soc: cavs15: Add missing SHIM registers.
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 9 15:43:01 2020 +0000
xtensa: intel_adsp/cavs_v15: fix usage of LP SRAM power gating
Remove LSPGCTL as it can cause confusion, use SHIM_LSPGCTL instead.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Feb 26 15:28:48 2020 +0000
boards: up_squared_adsp: Use local xtensa HAL instead of SDK HAL
SDK HAL is deprecated for Intel ADSP SoCs so fix and use local HAL
module.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Mon Mar 30 10:45:15 2020 -0700
soc: add Intel Audio DSP SoC family
This creates a SoC family for the audio DSPs on various
Intel CPUs. The intel_apl_adsp is being moved into
this family as well, since it is part of the CAVS v1.5
series of DSPs.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Mon Mar 30 11:29:02 2020 -0700
soc: xtensa: add CMakeLists.txt
Add CMakeLists.txt under soc/xtensa so that CMakeLists.txt
inside each SoC directory will be included, similar to
what ARM and RISCV have.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Wed Jun 17 12:30:43 2020 -0700
Revert "boards: up_squared_adsp: Add flasher script"
This reverts commit 80f295a9dd.
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Wed Jun 17 12:30:32 2020 -0700
Revert "boards: up_squared_adsp: Update logtool tool"
This reverts commit 7770d182c1.
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Wed Jun 17 12:30:23 2020 -0700
Revert "soc: intel_adsp: Generalize bootloader"
This reverts commit d6a33ef467.
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
soc: xtensa; intel: remove sof-config.h - SQUASH
No longer used.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add power-gpios device-tree binding property to power on module before
communicating with it. This pin is called CHIP_PU in case of ESP32{,-S2}
and CHIP_EN in case of ESP8266. Dedicated reset pin is available only on
the latter, however Espressif recommends (in ESP8266 Hardware Design
Guidelines) to use CHIP_EN instead. Follow those recommendations and use
power-gpios to reset chip if that is provided over device-tree.
Configure power-gpios and reset-gpios as inactive by default, so that
chip becomes ready after executing esp_reset() function, either if one
or both are provided over device-tree.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Most DT bindings use reset-gpios name when there is a pin to reset whole
chip. Rename wifi-reset-gpios to reset-gpios to be more consistent
between various drivers. Additionally this prevents confusion, as
somebody might think that this pin resets only WiFi, which is not true.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
The IIS2ICLX is a high-accuracy. ultra-low noise, low-power
two-axis linear accelerometer which can be interfaced through
either I2C or SPI bus.
Its high accuracy, stability over temperature and repeatability
make IIS2ICLX particularly suitable for inclination measurement
for industrial applications (inclinometers).
https://www.st.com/resource/en/datasheet/iis2iclx.pdf
This driver is based on stmemsc i/f v1.03.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Have the driver default to UART_CFG_PARITY_NONE if no parity property
exists rather than using default in binding.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This defines the TRNG for EFM32GG11 and enables it for trng0
in the dts for the matching development kits.
Signed-off-by: Thorvald Natvig <thorvald@natvig.com>
This defines wdog0 and wdog1 for the EFM32GG11 MCU and enables wdog0
in the dts for the matching development kits.
Signed-off-by: Thorvald Natvig <thorvald@natvig.com>
While the STM32H7 features a special dual mode operation for ADC1 and
ADC2, the register specified for adc1_2 node was actually the one for
ADC1 in normal single mode operation.
This commit fixes register for dual mode and adds adc1 and adc1 nodes.
Signed-off-by: Martin Jäger <martin@libre.solar>
Commit ac31c4e458 updated the mcux
ethernet driver to get the ethernet peripheral base address from device
tree instead of an nxp hal preprocessor macro. This exposed an error in
the k6x device tree and caused a runtime assertion in networking
applications on the frdm_k64f board:
ASSERTION FAIL [instance < (sizeof(s_enetBases) / sizeof((s_enetBases)[0]))] @ WEST_TOPDIR/modules/hal/nxp/mcux/drivers/kinetis/fsl_enet.c:323
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Convert driver to pcintrl configuration using pcintrl helper
macros.
Pinctrl init sequence has to be done before bus_mutex initialization.
Driver dts bindings are updated to reflect usage of pinctrl-x
properties
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
* Add comments about the default settings
* Change proximity-trigger default to match POR of 'disabled'
* Added reference to datasheet
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Provide more docs on ngpios and try and clarify the case if there are
holes in the GPIO slot range how ngpios should work.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In npcx7 series, there're 8 Pulse Width Modulator (PWM) modules and each
one support generating a single 16-bit PWM output. A 16-bit clock
prescaler (PRSCn) and a 16-bit counter (CTRn) determine the cycle time,
the minimal possible pulse width, and the duty-cycle steps.
Beside introducing pwm driver for Nuvoton NPCX series, this CL also
includes:
1. Add PWM device tree declarations.
2. Zephyr PWM api implementation.
3. Add aliases in npcx7m6fb_evb board device tree file for supporting
samples/basic/blinky_pwm application and pwm test suites
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
Add an emulation controller which routes SPI traffic to an attached
emulator. Only one emulator is supported per bus at present, since
chip-selction functionality is not present.
This allows drivers for SPI peripherals to be tested on systems that
don't have that peripheral attached, with the emulator handling the SPI
traffic.
Signed-off-by: Simon Glass <sjg@chromium.org>
Only difference compared to existing Xe variant is less flash memory.
Existing nodes for DAC were moved up one level to stm32g474.dtsi
Signed-off-by: Martin Jäger <martin@libre.solar>
In case a "required: False" enum binding doesn't mention a
default value, but a default value makes sense to be set in the code,
DT_ENUM_IDX_OR could be used to provide the default idx to be used.
New macro comes with appropriate tests.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Reused Linux bindings were using /* */ in some property description
fields.
This is not compatible with legacy device tree api which expands
these fields in commented sections of generated file
devicetree_legacy_unfixed.h resulting in compilation issue.
Seen when running tests/lib/devicetree/legacy_api.
Remove /* */ for now, waiting legacy api to be removed.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Generalize io-channels and io-channel-names devicetree node properties
and move their definitions to base.yaml. Keep binding specific
description where relevant.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Change default pinmux of functional pads to GPIOs. It includes:
1. PIN96.A0.A2.A4 - If internal flash is supported
2. PIND2.00 - Default PSL inputs
3. PIN31.30.27.26.25.24.23.22 - Keyboard inputs
4. PIN21.20.17.16.15.14.13.12.11.10.07.06.05.04.82.83.03.B1 - Keyboard
outputs
5. Add description for soc_pinctrl_mux_configure() usage.
It also fixed the typo and inverse mistakes in npcx7-alts-map.dtsi.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
This change allows to use SSD1306 based displays to be used on the
SPI bus as well.
Adding SPI shield.
Tested on SSD1306 and SSD1309 based displays using I2C.
Tested on SSD1309 based display using SPI.
Signed-off-by: Marco Peter <marco@peter-net.ch>
This CL adds more comments for each macro functions used for device tree
file for better explanations. It also changes all hex values in soc.c to
lower case.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
This CL contains the drivers of NPCX Host Sub-Modules that serve as an
interface between the Host and Core domains. For most of them, the Host
can configure these modules via eSPI(Peripheral Channel)/LPC by
accessing 'Configuration and Control register Set' which IO base address
is 0x4E as default. And the interrupts in core domain help handling any
events from host side.
In this commit, we introduced six host sub-modules. It includes:
1. Keyboard and Mouse Controller (KBC) interface.
2. Power Management (PM) channels.
3. Shared Memory mechanism (SHM).
4. Core Access to Host Modules (C2H).
5. Mobile System Wake-Up functions (MSWC).
6. Serial Port (Legacy UART)
The tasks in application layer such as 8042, ACPI and host command can
cooperation with this driver by connecting api or callback functions.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
In npcx7 series, all of them support the Intel Enhanced Serial
Peripheral Interface (eSPI) Revision 1.0. This specification provides a
path for migrating host sub-devices via LPC to a lower pin count, higher
bandwidth bus. In addition to Host communication via the peripheral
channel, it provides virtual wires support, out-of-band communication,
and device mastering option over the Chipset SPI flash.
Becisdes introducing eSPI device in npcx7, this CL also includes:
1. Add eSPI device tree declarations.
2. Add npcx7-espi-vws-map.dtsi to present the relationship between eSPI
Virtual-Wire signals, eSPI registers, and wake-up input sources.
3. Zephyr eSPI api implementation.
4, Add OOB (Out of Band tunneled SMBus) support.
5. Add configuration files for eSPI test suites.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
stm32f1 series pin controller IP is not compatible with other stm32
series.
Set the dedicated st,stm32f1-pinctrl compatible for pinctrl node.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Provide yaml bindings for st,stm32f1-pinctrl copmpatible.
It differs from generic stm32 pinctrl bindings on the following points:
- Pinmux "function" parameter: Alternate, General output, Input, Analog
- Pinmux supports an additional "remap" parameter to encode potential
remapping configuration
- Bias configs only apply to input modes
- Drive and speed configs only apply to output modes
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Rename compatible st,stm32-pinmux to st,stm32-pinctrl to better
reflect the nature of upcoming child nodes.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
STM32L151xC SoC differs from other L1 SoCs in RAM (32KiB) and
flash (256KiB) size, and amount of interrupts (57, see STM32Cube).
Devicetree and Kconfig support.
Signed-off-by: Noelle Clement <noelleclement@hotmail.com>
Allow to reconfigure UART baudrate on ESP and on host MCU, so a
non-default baudrate can be used for communication. This option helps
for example to increase network bandwidth without touching ESP chip
firmware.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Move pixel format setting (RGB565/RGB888) to DeviceTree. Add support for
changing pixel format at runtime.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Adds imx rt support.
Allows n-number of can interfaces based on device-tree.
Adds a "common" irq name.
Added CAN bus pins and dts for 1060 and 1064 EVK.
Signed-off-by: Rick Talbott <rtalbott@fastmail.com>
* Add ADC2 and ADC3 to the F103xE definition.
* Add a dtsi file for the F103xG based on the F103xE.
The F103xG has 1 MB of flash, 96 KB of RAM, and additional timers
TIM9/10/11/12/13/14.
Signed-off-by: Paul Fagerburg <pfagerburg@google.com>
Move the devicetree bindings for Analog-to-Digital Converters (ADCs)
from dts/bindings/iio/adc to dts/bindings/adc as Zephyr does not have
an IIO layer.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
update rt6xx series sram mapping to skip 0x180000,
reserved for DSP usage.
this fixes tests/subsys/debug/coredump for this board
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
The sam4l pinctrl contains two entries with wrong values. Fix the
typo to create valid pinctrl map.
Fixes#28538.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
HAS_DTS_I2C is now selected by I2C and
always used as I2C && HAS_DTS_I2C.
It could then be purely removed.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Change #28199 introduced systick configuration from device tree.
For now this should not be used on platforms that support alternate
tick source, as this is the case on l4 and wb series with LPTIM.
Until dts allows to configure lptim from dts, keep systick disabled
by default on these platforms.
Fixes#28280
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Use setting from devicetree to drive the default setting for
CORTEX_M_SYSTICK. We update the dts files to default systick to be
enabled since the major of cortex-m platforms utilize it by default
(except on Nordic SoCs, TI CC13x2/CC26x2 and MEC1501 in which we
default to disabled).
Fixes#25299
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The host command peripheral device API abstracts how an embedded
controller sends and receives data from a host on a bus. Each bus like
eSPI, SPI, or I2C would implement their own host command peripheral
device. Each hardware device would then handle the necessary hardware
access to send and receive data over that bus.
The chosen host command peripheral device will be used by the host
command handler framework to send and receive host data correctly.
Signed-off-by: Jett Rink <jettrink@google.com>
The SX126x supports using DIO2 to control an TX switch, but only if
the switch can be operated using a single control signal. Add support
for RF switches that are wired to a GPIO instead of the radio chip
itself. This makes it possible to use RF switches that require two
control signals (one for the RX port and one for the TX port) by
wiring them to two GPIOs on the MCU.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
Add sector-size property to at45.yaml binding.
Different at45 flash memories have different sector sizes.
Signed-off-by: Marin Jurjevic <marin.jurjevic@hotmail.com>
Add devicetree support to specify bias-pull-up, bias-pull-down, and
drive-open-drain for pin configuration.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Instantiate RTT UART instances from devicetree nodes instead of from
Kconfig symbols. While RTT is implemented using software, not hardware,
it is emulating a hardware device, and thus should be configured through
devicetree. This allows the simulated UART device to be selected via
devicetree aliases and chosen nodes.
The following devicetree snippet will instantiate RTT channels 0 and 2
as UART devices.
```
/ {
rtt0: rtt_terminal {
compatible = "segger,rtt-uart";
label = "rtt_terminal";
status = "okay";
};
rtt2: rtt_secondary {
compatible = "segger,rtt-uart";
label = "rtt_app_specific";
status = "okay";
};
};
```
Fixes the RTT portion of #10621.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add support for UARTs 3-6 to the stm32f030xc SoC. These additional UARTs
share a single interrupt line, so only one may be enabled at a time.
Signed-off-by: Brian Kubisiak <brian@kubisiak.com>
Add an emulation controller which routes I2C traffic to attached
emulators depending on the I2C address selected. This allows drivers
for I2C peripherals to be tested on systems that don't have that
peripheral attached, with the emulator handling the I2C traffic.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This CL configures the UART wake-up event triggered from a falling edge
(START condition) on CR_SIN pin. It also includes:
1. Introduce wui_maps property in yaml file to present relationship
between Wake-Up Input (WUI) and UART device.
2. Implement wake-up mechanism by MIWU api functions.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
Add gpio support for Nuvoton NPCX series. This CL includes:
1. Add GPIO device tree declarations.
2. Introduce wui_maps property in yaml file to present relationship
between Wake-Up
Input (WUI) and 8 IOs belong to the device.
3. Zephyr GPIO api implementation.
4. GPIO callback functions implementation with MIWU api functions.
5. Overlay file for gpio basic tests
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
The device Multi-Input Wake-Up Unit (MIWU) supports the embedded
controller (EC) to exit 'Sleep' or 'Deep Sleep' power state which allows
chip has better power consumption. Also, it provides signal conditioning
such as 'Level' and 'Edge' trigger type and grouping of external
interrupt sources of NVIC. The NPCX series has three identical MIWU
modules: MIWU0, MIWU1, MIWU2. Together, they support a total of over 140
internal and/or external wake-up sources.
In this CL, we use device tree files to present the relationship bewteen
MIWU and the other devices in different npcx series. For npcx7 series,
it include:
1. npcx7-miwus-int-map.dtsi: it presents relationship between MIWU group
and NVIC interrupt in npcx7. Please notice it isn't 1-to-1 mapping.
2. npcx7-miwus-wui-map.dtsi: it presents relationship between input of
MIWU and its source device such as gpio, timer, eSPI VWs and so on.
This CL also includes:
1. Add MIWU device tree declarations.
2. MIWU api function declarations and implementation to configure signal
conditions and callback function mechanism. They can be be classified
into two types. One is for GPIO which connects original gpio callback
implemetation and the other is for generic devices such as timer,
eSPI, and so on.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
The driver utilizes the CONFIG_NET_OFFLOAD setting to avoid the
normal handling of IP packets, and instead uses a socket-like
UART interface to handle incoming and outgoing data via AT commands.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
